Increased sensitivity for Coomassie staining of sodium dodecyl sulfate-polyacrylamide gels using PhastSystem Development Unit

Staining of proteins in PhastGel gradient media with Coomassie Blue R 350 was considerably improved using a lower concentration of methanol (10% v/v) and 2% ammonium sulfate in the staining solution and 10% acetic acid for destaining. The detection limit in sodium dodecyl sulfate-polyacrylamide gels was lowered by a factor of 10 to about 2 ng per protein band. The Coomassie staining method was adapted to the newly developed silver staining procedure so that both can be used in parallel in PhastSystem.     

Improved silver staining procedure for fast staining in PhastSystem Development Unit. I. Staining of sodium dodecyl sulfate gels

A new modification of silver staining of proteins in sodium dodecyl sulfate polyacrylamide gels is adapted to automated staining in PhastSystem Development Unit. The use of a reduction step, after fixation, with thiosulfate in alcoholic sodium acetate buffer results in a considerable increase in sensitivity without the need for a recycling step. The detection limit is tenfold lower than in the silver staining procedure recommended so far for PhastSystem and corresponds to 0.05-0.1 ng protein per band. Total staining time with the new procedure is 75 min.     

Routine diagnosis with PhastSystem compared to conventional electrophoresis: automated sodium dodecyl sulfate-polyacrylamide gel electrophoresis, silver staining and western blotting of urinary proteins

The recent introduction of the PhastSystem, an automatic electrophoresis and staining system with precast gradient-gels, allows rapid and reproducible analysis of proteinuria in patients suffering from renal injury. A routine method for sodium dodecyl sulfate-polyacrylamide gradient gel electrophoresis (SDS-PAGE) and silver staining of unconcentrated urine specimens in the PhastSystem is described and compared to our conventional "macro"-method with self-cast SDS-polyacrylamide gradient gels. The method described for the PhastSystem using 0.3 microL sample volumes and an 8-25% polyacrylamide gradient gel leads to highly reproducible results within 1.5 h. Before electrophoresis urine specimens were neither concentrated nor dialyzed. Samples with a protein concentration exceeding 5 mg/mL had to be diluted 1:5 (v/v). Analysis and documentation of PhastGels appeared as easy as with our conventional SDS-PAGE. Protein bands could reliably be identified by Western blotting. Urine and serum proteins, separated in PhastGels, were electrophoretically transferred to nitrocellulose and detected with specific antibodies against human albumin, transferrin, alpha-1-antitrypsin and IgG. Comparison of several standard kits for molecular weight determination revealed considerable differences concerning the quality of protein separation patterns. Availability of precast gels and automatization of SDS-PAGE and staining allows easy standardization of urine SDS-PAGE among clinical routine laboratories.     

Sensitive silver staining of protein in sodium dodecyl sulfate-polyacrylamide gels using an azo dye, calconcarboxylic acid, as a silver-ion sensitizer

A highly sensitive silver staining method for detecting proteins in sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) was developed. It is based on the silver nitrate staining method but also employs an azo dye, calconcarboxylic acid (NN), as a silver-ion sensitizer. It increases silver binding on protein bands or spots by the formation of a silver-dye complex and also increases the reducing power of silver ions to metallic silver by NN itself with formaldehyde. After a 2 h gel fixing step, the protocol including sensitization, silver-ion impregnation, and reduction steps can be completed in 1 h. The sensitivity is superior to that of silver stain with glutardialdehyde as a silver-ion sensitizer. The detection limit of NN-silver stain is 0.05-0.2 ng protein. Considering the high sensitivity without using glutardialdehyde, the NN-silver stain would be useful for routine silver staining of proteins.     

Background-free, high sensitivity staining of proteins in one- and two-dimensional sodium dodecyl sulfate-polyacrylamide gels using a luminescent ruthenium complex

SYPRO Ruby dye is a permanent stain comprised of ruthenium as part of an organic complex that interacts noncovalently with proteins. SYPRO Ruby Protein Gel Stain provides a sensitive, gentle, fluorescence-based method for detecting proteins in one-dimensional and two-dimensional sodium dodecyl sulfate-polyacrylamide gels. Proteins are fixed, stained from 3h to overnight and then rinsed in deionized water or dilute methanol/acetic acid solution for 30 min. The stain can be visualized using a wide range of excitation sources commonly used in image analysis systems including a 302 nm UV-B transilluminator, 473 nm second harmonic generation (SHG) laser, 488 nm argon-ion laser, 532 nm yttrium-aluminum-garnet (YAG) laser, xenon arc lamp, blue fluorescent light bulb or blue light-emitting diode (LED). The sensitivity of SYPRO Ruby Protein Gel Stain is superior to colloidal Coomassie Brilliant Blue (CBB) stain or monobromobimane labeling and comparable with the highest sensitivity silver or zinc-imidazole staining procedures available. The linear dynamic range of SYPRO Ruby Protein Gel stain extends over three orders of magnitude, which is vastly superior to silver, zinc-imidazole, monobromobimane and CBB stain. The fluorescent stain does not contain superfluous chemicals (formaldehyde, glutaraldehyde, Tween-20) that frequently interfere with peptide identification in mass spectrometry. While peptide mass profiles are severely altered in protein samples prelabeled with monobromobimane, successful identification of proteins by peptide mass profiling using matrix-assisted laser desorption/ionization mass spectrometry was easily performed after protein detection with SYPRO Ruby Protein Gel stain.     

Fluorescence detection of proteins in sodium dodecyl sulfate-polyacrylamide gels using environmentally benign, nonfixative, saline solution

SYPRO Tangerine stain is an environmentally benign alternative to conventional protein stains that does not require solvents such as methanol or acetic acid for effective protein visualization. Instead, proteins can be stained in a wide range of buffers, including phosphate-buffered saline or simply 150 mM NaCl using an easy, one-step procedure that does not require destaining. Stained proteins can be excited by ultraviolet light of about 300 nm or with visible light of about 490 nm. The fluorescence emission maximum of the dye is approximately 640 nm. Noncovalent binding of SYPRO Tangerine dye is mediated by sodium dodecyl sulfate (SDS) and to a lesser extent by hydrophobic amino acid residues in proteins. This is in stark contrast to acidic silver nitrate staining, which interacts predominantly with lysine residues or Coomassie Blue R, which in turn interacts primarily with arginine and lysine residues. The sensitivity of SYPRO Tangerine stain is similar to that of the SYPRO Red and SYPRO Orange stains - about 4-10 ng per protein band. This detection sensitivity is comparable to colloidal Coomassie blue staining and rapid silver staining procedures. Since proteins stained with SYPRO Tangerine dye are not fixed, they can easily be eluted from gels or utilized in zymographic assays, provided that SDS does not inactivate the protein of interest. This is demonstrated with in-gel detection of rabbit liver esterase activity using alpha-naphthyl acetate and Fast Blue BB dye as well as Escherichia coli beta-glucuronidase activity using ELF-97 beta-D-glucuronide. The dye is also suitable for staining proteins in gels prior to their transfer to membranes by electroblotting. Gentle staining conditions are expected to improve protein recovery after electroelution and to reduce the potential for artifactual protein modifications such as the alkylation of lysine and esterification of glutamate residues, which complicate interpretation of peptide fragment profiles generated by mass spectrometry.     

Quantification of proteins in sample buffer for sodium dodecyl sulfate-polyacrylamide gel electrophoresis using colloidal silver.

A rapid and simple assay for quantification of proteins in sodium dodecyl sulfate-sample buffer is described. Proteins are bound to a nitrocellulose membrane, stained with colloidal silver, and quantified by transmission densitometry. The staining requires 1 microL of protein sample and takes less than 20 min. Good linearity between the staining intensity and amount of proteins is in the range of 5-100 ng.     

Fully reversible procedure for silver staining improves densitometry of complex mixtures of biopolymers resolved by sodium dodecyl sulfate-polyacrylamide gel electrophoresis

Due to its high sensitivity, silver staining is a widely popular method for the revelation of biopolymers separated by both native and denaturing electrophoresis. A step-by-step method for the destaining and restaining of overdeveloped/overloaded silver-stained bands is described that is applicable to both proteins and nucleic acids. The procedure significantly improves densitometric analysis of gels that have been silver stained with either commercial kits or solutions made in-house. The method permits reproducible densitometry of silver-stained gels and allows quantification of both main and minor components in complex mixture of molecules resolved on the same gel slab. All steps may be interrupted and are readily reversible, allowing for facile densitometric analyses and photographic recording under optimized conditions. Furthermore, common artifacts such as differential staining of the two gel surfaces, localized uneven yellow-ochre background, and the presence of fold marks and fingerprints can be easily removed.     

A systematic investigation into the recovery of radioactively labeled proteins from sodium dodecyl sulfate-polyacrylamide gels

We report the results of a systematic investigation designed to optimize a method for quantifying radioactivity in proteins in sodium dodecyl sulfate-polyacrylamide gels. The method involves dissolving appropriately sized pieces of gel in hydrogen peroxide and heating to 70 degrees C overnight followed by liquid scintillation counting. H(2)O(2) had no effect on the count rates of [(14)C]bovine serum albumin (BSA) when counted in a conventional liquid scintillation system, and the count rates remained stable for several days. Temperatures below 70 degrees C resulted in incomplete extraction of radioactivity from gels containing [(14)C]BSA, but there was also a significant reduction in count rates in samples incubated at 80 degrees C. At 70 degrees C recovery was not affected by the amount of sample loaded onto the gel or by the staining procedure (Coomassie Brilliant Blue or SYPRO Ruby). Recoveries were in the range of 89-94%, and the coefficient of variation for five replicate samples was 5-10%. This method offers a reliable way of measuring the amount of radioactivity in proteins that have been separated by electrophoresis. It may be useful, for example, in quantitative metabolic labeling experiments when it is necessary to know precisely how much tracer has been incorporated into a particular protein.     

Fast visible dye staining of proteins in one- and two-dimensional sodium dodecyl sulfate-polyacrylamide gels compatible with matrix assisted laser desorption/ionization-mass spectrometry

A fast and matrix assisted laser desorption/ionization-mass spectrometry (MALDI-MS) compatible protein staining method in one- and two-dimensional sodium dodecyl sulfate-polyacrylamide gel electrophoresis (1- and 2-D SDS-PAGE) is described. It is based on the counterion dye staining method that employs oppositely charged two dyes, zincon (ZC) and ethyl violet (EV) to form an ion-pair complex. The protocol, including fixing, staining and quick washing steps, can be completed in 1-1.5 h depending upon gel thickness. It has a sensitivity of 4-8 ng, comparable to that of colloidal Coomassie Brilliant Blue G (CBBG) staining with phosphoric acid in the staining solution. The counterion dye stain does not induce protein modifications that complicate interpretation of peptide mapping data from MS. Considering the speed, sensitivity and compatibility with MS, the counterion dye stain may be more practical than any other dye-based protein stains for routine proteomic researches.     

Use of a polynomial exponential function to describe migration of proteins on sodium dodecyl sulfate-polyacrylamide gels

Standard mixtures of proteins were separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Polynomial regression analysis was used to fit curves to the data points obtained by plotting log10 of protein molecular weight versus electrophoretic mobility. Polynomials with orders ranging from 1 to 4 were generated. The coefficients of each equation were analyzed for statistical significance. It was found that a third order polynomial was the highest-order equation in which all coefficients contributed significantly to the prediction of molecular weights. Using this equation, it was possible to estimate the molecular weights of known proteins in the range from 97,400 to 14,400 with a maximum error of 1%, compared with a maximum error of 17% when a first-order equation was used to describe the migration of the standards.     

Fast fluorescent staining of protein in sodium dodecyl sulfate polyacrylamide gels by palmatine

A fast and sensitive protein fluorescent detection method in SDS-PAGE using the natural product palmatine is described. Palmatine is an alkaloid found in various plants exhibiting a broad spectrum of antibiotic activity in humans. The sensitivity of palmatine staining is similar to those of the SYPRO Red, SYPRO Tangerine, and SYPRO Orange protein gel stains - about 4 ng per protein band. This detection sensitivity is comparable to colloidal CBB staining. Since proteins stained with palmatine do not need destaining, the staining procedure can be easily shortened and completed in about 30 min. Stained proteins can be photographed using a UV transilluminator. The results of the present study suggest that the palmatine staining is sensitive, rapid, low cost, and safe for a broad application to the research of protein.     

Fluorescence detection and quantitation of recombinant proteins containing oligohistidine tag sequences directly in sodium dodecyl sulfate-polyacrylamide gels

Two fluorophore-nitrilotriacetic acid conjugates, Pro-Q Sapphire 365 and Pro-Q Sapphire 488 oligohistidine gel stains, have been developed for the fluorescence detection of fusion proteins containing oligohistidine tags directly in sodium dodecyl sulfate polyacrylamide gels, without the requirement for electroblotting, reporter enzymes or secondary detection reagents. Pro-Q Sapphire 365 oligohistidine gel stain exhibits bright-blue fluorescence (emission maximum = 450 nm) when illuminated with UV-A or UV-B light from a standard ultraviolet transilluminator. Pro-Q Sapphire 488 oligohistidine gel stain exhibits bright-green fluorescence (emission maximum = 515 nm) when illuminated with visible light from a laser-based gel scanner equipped with a 470 nm second-harmonic generation (SHG) or 488 nm argon-ion laser source. Typically, 25-65 ng of oligohistidine-tagged fusion protein in whole cell lysates is detectable using either stain. After documenting the fluorescence signal from the Pro-Q Sapphire dyes, gels may be post-stained with the red-fluorescent SYPRO Ruby protein gel stain in order to reveal the total protein pattern.     

An improved sodium dodecyl sulfate-polyacrylamide gel electrophoresis system for the analysis of membrane protein complexes

Membrane protein complexes such as the reaction center complexes of oxygenic photosynthesis or the complex I of mitochondira are composed of many subunit polypeptides. To analyze their polypeptide compositions by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), a wide range of molecular sizes has to be resolved, especially in the low molecular mass range. We have improved the traditional Tris/HCI buffer systems adopting a Tris/2-(N-morpholino)ethanesulfonic acid (MES) buffer system containing 6 M urea. This gel system was used with an 18-24% acrylamide gradient for the separation of polypeptides with molecular masses from below 5 kDa to over 100 kDa. This buffer system can also be applied to the usual uniform concentration of acrylamide gel and also to minislab gels.     

Activity staining of glutathione peroxidase after electrophoresis on native and sodium dodecyl sulfate polyacrylamide gels

Glutathione peroxidase (GSH-Px), from commercial bovine erythrocytes or ammonium sulfate fractionations (30-45%, 45-60%, 60-75% and 75-90% saturations) of ginger rhizome, was detected on polyacrylamide gels after native polyacrylamide gel electrophoresis (PAGE) or sodium dodecyl sulfate (SDS)-PAGE. The gel was submerged in a 50 mM Tris-HCl buffer (pH 7.9) containing 13 mM glutathione and 0.004% hydrogen peroxide with gentle shaking for 10-20 min. The GSH-Px activity was stained with a solution containing 1.2 mM 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and 1.6 mM phenazine methosulfate (PMS) for 10 min. The clear zone of GSH-Px activity on a purple background was found in both native and SDS-PAGE gels. This fast and sensitive method can be used in the process of enzyme purification and characterization of mammalian or plant cells.     

Fast horizontal electrophoresis. II. Development of fast automated staining procedures using PhastSystem

The development of equipment for fast automated staining is described. It is possible to handle staining procedures with up to 20 steps and nine different solutions. To increase the reaction rate in the reaction chamber, the gels are rotated and high temperatures are used. The temperature in the reaction chamber is controlled between room temperature and 50 degrees C. Increased temperature, above 20 degrees C, generally results in faster staining and destaining. However, some reactions proceed better at a low temperature, including fixation of proteins with TCA, and the development step in silver staining, where increased temperatures cause a high background stain. Silver staining using acidic silver nitrate solution is preferred, due to easy preparation and good storage stability of the reagents. This method also causes little precipitation of silver on the walls of the reaction chamber. Silver staining is accomplished within one hour. Staining with PhastGel Blue is accomplished within 30 min.     

Highly sensitive and simple fluorescence staining of proteins in sodium dodecyl sulfate-polyacrylamide-based gels by using hydrophobic tail-mediated enhancement of fluorescein luminescence

Fluorescein has an extremely low luminescence intensity in acidic aqueous media. However, when it was bound to proteins, subsequent increase of luminescence intensity took place. Furthermore, when a hydrophobic tail, such as aliphatic hydrocarbons, was introduced to fluorescein, more dramatic increase of luminescence intensity was observed upon binding to proteins. In the present study, by utilizing this luminescence enhancement, three hydrophobic fluorescein dyes (5-dodecanoyl amino fluorescein, 5-hexadecanoyl amino fluorescein, and 5-octadecanoyl amino fluorescein) were examined as noncovalent fluorescent stains of protein bands in sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Effective incorporation of the dyes to proteins in gels was accomplished either simply by adding dyes at the protein fixation step, or by treating gels with a staining solution after the fixation. The sensitivity of this staining method using the fluorescein derivatives was approximately 1 ng/band for most proteins. For some cases, protein bands containing as low as 0.1 ng were successfully visualized. In addition, the detection sensitivity showed much less protein-to-protein variation than silver staining. This new staining method was also successfully applied to two-dimensional electrophoresis of rat brain proteins. Its overall sensitivity was comparable to that of silver staining.     

Improved detection of amylase activity by sodium dodecyl sulfate-polyacrylamide gel electrophoresis with copolymerized starch

An improved method, based on sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) for detection of amylase activity is described. This method will allow better characterization of certain amylases than that obtained by the Davis technique. The main features of the technique are: (i) identification of amylase bands and molecular mass determination are possible in the same gel; (ii) the hydrolysis of copolymerized substrate during electrophoretic separation is prevented using very low temperatures instead of inactivating agents such as chelating agents; and (iii) the technique is applicable to reveal amylase activity in a wide range of biological samples. The method is not useful for enzymes sensitive to SDS and for high molecular mass amylases.     

Anomalous electrophoretic behavior of a chitinase isoform from grape berries and wine in glycol chitin-containing sodium dodecyl sulfate-polyacrylamide gel electrophoresis gels

An anomalous electrophoretic behavior of a chitinase isoform present in both grape (Vitis vinifera L.) berries and wine was observed in glycol chitin-containing sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) gels. A progressive shift of the relative molecular mass M(r) of the enzyme (from approximately 30,500 up to approximately 57,700) with increasing glycol chitin concentration in the gels up to 0.1% was revealed when samples were electrophoresed under nonreducing conditions, whereas the presence of glycol chitin had no effects when samples were reduced before SDS-PAGE separation. The M(r) of other grape and wine chitinase isoforms as well as that of the chitinase from pomegranate (Punica granatum L.) fruit was unaffected by the presence of the substrate in the gel under both reducing and nonreducing conditions. Since the enzymes were inactive during the electrophoretic separation, it is likely that the retarding effect of glycol chitin observed specifically for the unreduced chitinase band from grape and wine was due to an interaction between the substrate and a chitin-binding domain different from the catalytic site, such as that typical of class I and class IV chitinases.     

Identification of proteins from one-dimensional sodium dodecyl sulfate-polyacrylamide gel electrophoresis using electrospray quadrupole-time-of-flight tandem mass spectrometry

The potential of electrospray tandem mass spectrometry using a quadrupole-time-of-flight tandem mass spectrometer was evaluated for the identification of two unknown proteins from one-dimensional polyacrylamide gel electrophoresis (1-D-PAGE). Two proteins from cellular cultures of mammary epithelia were purified by 1D-PAGE. Their identification was achieved using peptide sequence tags generated by LC/Q-TOF-MS/MS, whereas MALDI-TOF mass mapping failed for these proteins obtained from simple 1D-PAGE separation.