Electronic structure and magnetism in transition metals doped 8-hydroxy-quinoline aluminum

We report the room-temperature ferromagnetism in transition metals (Co, Ni)-doped 8-hydroxy-quinoline aluminum (Alq3) by thermal coevaporation of high purity metal and Alq3 powders. For 5% Co-doped Alq3, a maximum magnetization of approximately 0.33 microB/Co at 10 K was obtained and ferromagnetic behavior was observed up to 300 K. The Co atoms interact chemically with O atoms and provide electrons to Alq3, forming new states acting as electron trap sites. From this, it is suggested that ferromagnetism may be associated with the strong chemical interaction of Co atoms and Alq3 molecules.     

Structure of the active sites of Co-Mo Hydrodesulfurization catalysts as studied by magnetic susceptibility measurement and NO adsorption

The elucidation of a molecular structure of the active sites (i.e., the Co-Mo-S phase) of Co-Mo hydrodesulfurization catalysts has received extensive attention. In the present study, we unambiguously determined, for the first time, the NO adsorption behavior and magnetic property of the Co-Mo-S phase by preparing unique Co-Mo/Al(2)O(3) catalysts (CVD-Co/MoS(2)/Al(2)O(3)), in which all the Co atoms are present as the Co-Mo-S phase. The catalysts were characterized by NO adsorption (pulse technique and FTIR), Co K-edge XANES, and the magnetic susceptibility and effective magnetic moment of Co. Nitric oxide molecules were adsorbed on 33% of the Co atoms in CVD-Co/MoS(2)/Al(2)O(3) after sulfidation and on only half of the Co atoms even after an H(2)-treatment of the sulfided catalyst at 573-673 K. The Co atoms in CVD-Co/MoS(2)/Al(2)O(3) exclusively exhibited an antiferromagnetic property, indicating that even-numbered Co atoms are interacting with each other in the Co-Mo-S phase. A Co-Mo/Al(2)O(3) catalyst, prepared by a conventional impregnation technique, was composed of the antiferromagnetic Co sulfide species as observed in CVD-Co/MoS(2)/Al(2)O(3) in addition to Co(9)S(8). On the basis of the NO adsorption behavior and magnetic property, it is empirically proposed that the structure of the Co-Mo-S phase is represented as a Co sulfide dinuclear cluster located on the edge of MoS(2) particles. The magnetic property of Co/Al(2)O(3) sulfide catalysts depended on the preparation method.     

Fluorinated Alq3 derivatives with tunable optical properties

This communication reports that not only the emission colour but also the photoluminescence quantum yield of Alq3 can be tuned by introducing fluorine atoms at different positions; with fluorination at C-5 the emission is red-shifted with a tremendously decreased intensity, fluorination at C-6 causes a blue-shift with a significantly increased intensity, and fluorination at C-7 has a minor effect on both the colour and intensity of Alq3's emission.     

Light-emitting carbazole derivatives: potential electroluminescent materials

Stable carbazole derivatives that contain peripheral diarylamines at the 3- and 6-positions and an ethyl or aryl substituent at the 9-position of the carbazole moiety have been synthesized via palladium-catalyzed C-N bond formation. These new carbazole compounds (carbs) are amorphous with high glass transition temperatures (T(g), 120-194 degrees C) and high thermal decomposition temperatures (T(d) > 450 degrees C). The compounds are weakly to moderately luminescent in nature. The emission wavelength ranges from green to blue and is dependent on the substituent at the peripheral nitrogen atoms. Two types of light-emitting diodes were constructed from carb: (I) ITO/carb/TPBI/Mg:Ag and (II) ITO/carb/Alq(3)/Mg:Ag, where TPBI and Alq(3) are 1,3,5-tris(N-phenylbenzimidazol-2-yl)benzene and tris(8-hydroxyquinoline) aluminum, respectively. In type I devices, the carb functions as the hole-transporting as well as emitting material. In type II devices, either carb, or Alq(3) is the light-emitting material. Several green light-emitting devices exhibit exceptional maximum brightness, and the physical performance appears to be better than those of typical green light-emitting devices of the structure ITO/diamine/Alq(3)/Mg:Ag. The relation between the LUMO of the carb and the performance of the light-emitting diode is discussed.     

Interface modification of 8-hydroxyquinoline aluminium with combined effects in quasi-solid dye-sensitized solar cells

In this paper, 8-hydroxyquinoline aluminium (Alq(3)) was used in interface modification of dye-sensitized solar cells (DSCs). Alq(3) was the first discovered interface modification material with combined effects of retarding charge recombination and F?rster resonant energy transfer (FRET). Results of dark current curve and AC impedance showed that Alq(3) could retard charge recombination in DSCs. I-V curves showed that conversion efficiency increased with Alq(3) modification. Besides the interface modification effect, it was discovered that Alq(3) also acted as energy relay dye with the FRET effect between itself and N3, which increased photoresponse and electron injection. The application of Alq(3) with combined effects opened a new door to explore more novel multi-functional interface modification materials to improve the performance of DSCs.     

超薄层在白色有机电致发光器件中的应用

以DCJTB为掺杂剂, 以BCP为空穴阻挡层, 研究了两种结构的有机电致发光器件ITO/NPB/BCP/Alq3:DCJTB/Alq3/Al(结构A)和ITO/NPB/BCP/Alq3/Alq3:DCJTB/Alq3/Al(结构B)的电致发光光谱. 实验结果显示, 在结构A器件的电致发光光谱中, 绿光的相对发光强度较弱,增加Alq3层的厚度对绿光的相对发光强度的影响也很小; 而在结构B器件的电致发光光谱中, BCP层与掺杂层(Alq3:DCJTB)之间的Alq3薄层对绿光的相对发光强度影响显著, 用很薄的Alq3层就可以得到强的绿光发射. 进一步改变器件结构, 利用有机超薄层就可以得到稳定的白光器件ITO/NPB(50 nm)/BCP(3 nm)/Alq3(3 nm)/Alq3:DCJTB(1%(w))(5 nm)/Alq3(7 nm)/Al. 随着电压的增加(14-18 V), 该器件的色坐标基本保持在(0.33, 0.37)处不动; 在432 mA·cm-2的电流密度下, 该器件的发光亮度可达11521 cd·m-2.     

八-羟基喹啉铝薄膜光致发光的厚度依赖性质

In situ thickness dependent photoluminescence (PL) measurements of tris(8-hydroxyquinoline) aluminum(Alq3) film were performed. At the beginning of Alq3 deposition on the glass substrate, the Alq3 emission showed a sharp red-shift. Further deposition of Alq3 resulted slight red-shift, and finally tended to saturated value. The total red-shift of about 12 nm was observed for the Alq3 film thickness range from 2 to 500 nm.This red-shift was attributed to the change from the 2D to 3D exciton state with increasing Alq3 film thickness. Meanwhile, the PL intensity of Alq3 emission increased continuously, and showed a rate change at the initial deposition of Alq3 due to non-rediative decay of excitons arised from the interaction between excitons and the substrate, and finally tended to saturation with the Alq3 thickness.     

PHOTOCONDUCTIVE PROPERTIES OF PVK:Alq3 BLEND FILMS STUDIED BY STEADY-STATE AND TIME-RESOLVED TRANSIENT PHOTOCURRENT SPECTRA

The carrier transport properties of the blends of the hole transport material poly(N-vinylcarbazole) (PVK) and the electron transport material tris (8-hydroxyquinolinolato) aluminumⅢ(Alq_3) are investigated at room temperature using steady-state and time-resolved transient photocurrent measurements as a function of doping concentration of Alq_3.Due to lower LUMO and higher HOMO energy level of Alq_3 than those of PVK,Alq_3 molecules may act as carrier trap states in PVK films at low concentration.However...     

CP/MAS 13C NMR characterization of the isomeric states and intermolecular packing in tris(8-hydroxyquinoline) aluminum(III) (Alq3)

The isomeric states and intermolecular packing of tris(8-hydroxyquinoline) aluminum(III) (Alq(3)) in the alpha-, gamma-, and delta-crystalline forms and in the amorphous state, which are important for understanding the light-emitting and electron-transport properties, have been analyzed by CP/MAS (13)C NMR. This simple NMR experiment shows that the isomeric state of alpha- and amorphous Alq(3) is meridional, whereas that of gamma- and delta-Alq(3) is facial. In the amorphous Alq(3), the inclusion of facial isomers has been under debate. Our experiments show that meridional isomers are dominant in the amorphous Alq(3), although the existence of facial isomers cannot be completely denied. The local structure of amorphous Alq(3) is similar to that of alpha-Alq(3) and is significantly different from those of gamma- and delta-Alq(3). Among these Alq(3) samples, the effect of intermolecular interaction is not found only for gamma-Alq(3). This finding can explain the good solvent solubility of gamma-Alq(3), compared with the other crystalline forms. It is also shown that the structures are locally disordered not only for amorphous Alq(3) but also for alpha-Alq(3), although clear X-ray diffraction peaks are observed for alpha-Alq(3). In contrast, the local structures of gamma- and delta-Alq(3) are well defined. A clear relation is found between the spectral patterns of CP/MAS (13)C NMR and the fluorescence wavelengths; the samples, which consist of facial isomers, show blue-shifted fluorescence compared with those of meridionals.     

可溶性聚合物电致发光材料PDHPV的合成及单、双层发光二极管器件的发光性能比较

可溶性聚合物电致发光材料ＰＤＨＰＶ的合成及单、双层发光二极管器件的发光性能比较李晨曦，尹春，黄文强，印寿根，张会旗，何炳林，郑军，华玉林（南开大学高分子化学研究所，天津，３０００７１）（天津理工学院材料物理研究所）关键词ＰＤＨＰＶ共轭聚合物；电致发光...     

Study of optoelectronic energy bands and molecular energy levels of tris (8-hydroxyquinolinate) gallium and aluminum organometallic materials from their spectroscopic and electrochemical analysis

For the purpose of investigating electro-molecular absorption bands, energy gaps, E_g and molecular energy levels (ionization potential, IP and electron affinity, EA) of tris (8-hydroxyquinolinate) gallium and aluminum, spectral analysis in conjunction with electrochemical measurements was carried out. UV-Vis-NIR and FTIR spectroscopic measurements were used to assign the electronic and molecular absorption bands in both of the materials. The XRD and scanning electronic microscopy (SEM) technique showed the amorphous nature. From the recorded data of cyclic voltammetry (CV) and materials absorption coefficient, HOMO, LUMO energy levels and energy gaps for Gaq3 and Alq3 were calculated. A bit smaller value of energy gap for Gaq3 (2.80 eV) compared to that of Alq3 (2.86 eV) has been ascribed to the differences in electronic configuration and coordinated bond lengths related to the central metal atom with respect to the quinolinate ligands. A higher value of HOMO energy level for the Alq3 (IP = 6.3 eV) revealed the need of higher potentials to oxidize its molecules comparing to that of Gaq3 (IP = 5.8 eV). It was observed that cationic metals have a direct effect on the physical and chemical behaviors of such organometallic materials that can be exploited to be used in tuning their properties to match the desired application in OSC and/or OLED technologies.     

Asymmetric heterobimetallic mixed-valence complex trans-[(SO3)Co(cyclam)(NCS)Ru(NH3)4(NCS)](BF4): Synthesis and characterization

[(SO₃)Co(cyclam)(NCS)] and [(SO₃)Co(cyclam)-NCS-Ru(NH₃)₄(NCS)](BF₄) complexes were synthesized and characterized by means of X-ray diffraction, electrochemistry, elemental analysis, and spectroscopic techniques. Crystallographic and FTIR data indicated NCS⁻ ligand is coordinated to Co through the nitrogen atom in the monomer species. Electrochemistry and FTIR data of the material isolated after reductive electrolysis of [(SO₃)Co(cyclam)(NCS)] hint that NCS⁻ and SO₃²⁻ are released thus forming [Co(cyclam)(L)₂]²⁺, where L is solvent molecules. The formation of the heterobimetallic mixed-valence complex induced a thermodynamic stabilization of Co and Ru metal atoms in the oxidized and reduced states, respectively. According to the Robin and Day classification, a Class II system with a comproportionation constant of 5.78 × 10⁶ is suggested for the mixed-valence complex based on the electrochemical and UV-Vis-NIR results.     

Organic Light Emitting Diodes with Lithium Contained Alq3 as Electron Injection Layer

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｏｒｇａｎｉｃｌｉｇｈｔｅｍｉｔｔｉｎｇｄｉｏｄｅ(ＯＬＥＤ) ,ｓｏｍｅｍｅｔａｌｓｗｉｔｈｌｏｗｗｏｒｋｆｕｎｃｔｉｏｎ ,ｓｕｃｈａｓａｌｌｏｙｏｆｍａｇ ｎｅｓｉｕｍａｎｄｓｉｌｖｅｒ(Ｍｇ∶Ａｇ) [1] ａｎｄａｌｕｍｉｎｉｕｍ[2 ] ,ａｒｅｕｓｅｄａｓｔｈｅｅｌｅｃｔｒｏｎｉｎｊｅｃｔｉｏｎｃａｔｈｏｄｅｓ .ＩｎＭｇ∶Ａｇａｌ ｌｏｙｓｉｌｖｅｒｉｓｕｓｅｄｔｏｐｒｏｔｅｃｔｍａｇｎｅｓｉｕｍｆｒｏｍｔｈｅｒｅａｃ ｔｉｏｎｏｆｍａｇｎｅｓｉｕｍｗｉｔｈｏｘｙｇｅｎａｎｄ…     

Hydrogen bonding interactions between ethylene glycol and water: density,excess molar volume,and spectral study

Studies of the density and the excess molar volume of ethylene glycol (EG)-water mixtures were carried out to illustrate the hydrogen bonding interactions of EG with water at different temperatures. The re-sults suggest that a likely complex of 3 ethylene glycol molecules bonding with 4 water molecules in an ethylene glycol-water mixture (EGW) is formed at the maximal excess molar volume,which displays stronger absorption capabilities for SO2 when the concentration of SO2 reaches 400×10?6 (volume ratio) in the gas phase. Meanwhile,FTIR and UV spectra of EGWs were recorded at various EG concentra-tions to display the hydrogen bonding interactions of EG with water. The FTIR spectra show that the stretching vibrational band of hydroxyl in the EGWs shifts to a lower frequency and the bending vibra-tional band of water shifts to a higher frequency with increasing the EG concentration,respectively. Furthermore,the UV spectra show that the electron transferring band of the hydroxyl oxygen in EG shows red shift with increasing the EG concentration. The frequency shifts in FTIR spectra and the shifts of absorption bands in UV absorption spectra of EGWs are interpreted as the strong hydrogen bonding interactions of the hydrogen atoms in water with the hydroxyl oxygen atoms of EG.     

Fraction of the CoMoS phases accessible to NO in Co-Mo hydrodesulfurization catalysts

It is established by using Co-Mo model sulfide catalysts, XAFS and FTIR that Co atoms constituting CoMoS phases are not oxidized by NO adsorption and that only 55% of the CoMoS phases is susceptible to NO adsorption even at the maximum coordinative unsaturation attainable under usual HDS reaction conditions (623-673 K).     

中位四(1-苯基吡唑-4-基)卟啉掺杂空穴传输材料的红色有机电致发光器件(英文)

使用中位-四(1-苯基吡唑-4-基)卟啉(TPPyPH2)掺杂空穴传输材料N,N′-二苯基-N,N′-双(4-甲苯基)-1,1′-二苯基-4,4′-二胺(TPD)制备了红色有机电致发光器件.因为TPD的发射光谱与TPPyPH2的吸收光谱具有更大的光谱重叠,为了得到更为有效的从主体材料TPD向红光染料TPPyPH2的能量传递,我们使用TPD代替传统的8-羟基喹啉铝(Alq3)作为主体发光材料.器件在680nm处具有纯的红光发射峰;通过使用Alq3电子传输层以及使用Alq3共掺杂发光层的方法,使器件的发光性能得到了改善,结构为ITO/Alq3+TPPyPH2+TPD(50nm)/Alq3(30nm)/Al的器件的最大发光亮度为177cd/m2.     

具有梯形结构钴(Ⅱ)配位聚合物的合成及晶体结构

Co(NO₃)₂, N-carbazolyacetic acid and 4,4′-bipyridyl can give rise to a novel coordination polymer [CO₂(Cabo)₂(NO₃)₂(4,4′-bipy)₂]_n using a fritted U-tube. Single crystal X-ray diffraction displays in the complex, each Co(Ⅱ) is six-coordinated by two N atoms from different 4,4′-bipyridyl ligands, two O atoms of the bridge from two N-carbazolyacetic acid and two O atoms of one nitrate anion to form a distorted octahedral. Two O atoms of the carboxyl group act as bridge to link two Co(Ⅱ) atoms. The resulting structure is a ladder polymer. CCDC: 211713.     

DFT study of paramagnetic adducts of tris-(8-hydroxyquinoline)aluminum (III)

Radicals formed by the addition of hydrogen (H) or muonium (Mu) to tris(8-hydroxyquinoline)aluminum(III) (Alq(3)) have been studied using density functional theory (DFT) calculations. Drew et al. (Phys. Rev. Lett. 2008, 100, 116601) studied Alq(3) using the longitudinal field muon spin relaxation technique and assumed the formation of muoniated radicals and rapid intermolecular electron hopping with a rate of (1.4 ± 0.2) × 10(12) s(-1). In this work, the results of DFT calculations on Alq(3), the H/Mu adducts of Alq(3), and the corresponding anions and cations are reported. The energy required to transfer an electron to or from the H/Mu adducts of Alq(3) is prohibitively large, ranging from 4.09 to 5.68 eV, which suggests that the unpaired electron does not hop onto neighboring molecules and that there is no long-range diffusion of the unpaired electron. The hyperfine coupling constants for the muoniated radicals were calculated and used to predict avoided level crossing resonance fields, which will allow experimenters to confirm that the unpaired electron is localized in close proximity to the muon.