A two-state computational investigation of methane C--H and ethane C--C oxidative addition to [CpM(PH3)]n+ (M = Co, Rh, Ir; n = 0, 1)

Reductive elimination of methane from methyl hydride half-sandwich phosphane complexes of the Group 9 metals has been investigated by DFT calculations on the model system [CpM(PH(3))(CH(3))(H)] (M = Co, Rh, Ir). For each metal, the unsaturated product has a triplet ground state; thus, spin crossover occurs during the reaction. All relevant stationary points on the two potential energy surfaces (PES) and the minimum energy crossing point (MECP) were optimized. Spin crossover occurs very near the sigma-CH(4) complex local minimum for the Co system, whereas the heavier Rh and Ir systems remain in the singlet state until the CH(4) molecule is almost completely expelled from the metal coordination sphere. No local sigma-CH(4) minimum was found for the Ir system. The energetic profiles agree with the nonexistence of the Co(III) methyl hydride complex and with the greater thermal stability of the Ir complex relative to the Rh complex. Reductive elimination of methane from the related oxidized complexes [CpM(PH(3))(CH(3))(H)](+) (M = Rh, Ir) proceeds entirely on the spin doublet PES, because the 15-electron [CpM(PH(3))](+) products have a doublet ground state. This process is thermodynamically favored by about 25 kcal mol(-1) relative to the corresponding neutral system. It is essentially barrierless for the Rh system and has a relatively small barrier (ca. 7.5 kcal mol(-1)) for the Ir system. In both cases, the reaction involves a sigma-CH(4) intermediate. Reductive elimination of ethane from [CpM(PH(3))(CH(3))(2)](+) (M = Rh, Ir) shows a similar thermodynamic profile, but is kinetically quite different from methane elimination from [CpM(PH(3))(CH(3))(H)](+): the reductive elimination barrier is much greater and does not involve a sigma-complex intermediate. The large difference in the calculated activation barriers (ca. 12.0 and ca. 30.5 kcal mol(-1) for the Rh and Ir systems, respectively) agrees with the experimental observation, for related systems, of oxidatively induced ethane elimination when M = Rh, whereas the related Ir systems prefer to decompose by alternative pathways.     

Probing the photoexcited states of rhodium corroles by time-resolved Q-band EPR. Observation of strong spin-orbit coupling effects

The photoexcited states of two 5,10,15-tris(pentafluorophenyl)corroles (tpfc), hosting Rh(III) in their core, namely Rh(pyr)(PPh 3)(tpfc) and Rh(PPh 3)(tpfc), have been studied by time-resolved electron paramagnetic resonance (TREPR) combined with pulsed laser excitation. Using the transient nutation technique, the spin polarized spectra are assigned to photoexcited triplet states. The spectral widths observed for the two Rh(III) corroles crucially depend on the axial ligands at the Rh(III) metal ion. In case of Rh(PPh 3)(tpfc), the TREPR spectra are found to extend over 200 mT, which exceeds the spectral width of non-transition-metal corroles by more than a factor of 3. Moreover, the EPR lines of the Rh(III) corroles are less symmetric than those of the non-transition-metal corrroles. The peculiarities in the TREPR spectra of the Rh(III) corroles can be rationalized in terms of strong spin-orbit coupling (SOC) associated with the transition-metal character of the Rh(III) ion. It is assumed that SOC in the photoexcited Rh(III) corroles effectively admixes metal centered (3)dd-states to the corrole centered (3)pipi*-states detected in the TREPR experiments. This admixture leads to an increased zero-field splitting and a large g-tensor anisotropy as manifested by the excited Rh(III) corroles.     

Hypothetical C(60) Metal-Cluster Fullerides and General Aspects of Tetrahedral Cluster Bonding

It is geometrically feasible to insert metal-metal-bonded M(4) tetrahedra and M(6) octahedra into the tetrahedral and octahedral holes, respectively, of the fcc C(60) lattice. The electronic structure of the hypothetical tetrahedral variants C(60)(M(4))(2), M = Rh, Co, is analyzed with approximate molecular orbital methods and band structure calculations. These compounds feature M-M and M-C(60) bonding and a variable degree of electron transfer to or from C(60). The C(60)(M(4))(2) phases should be metallic, but we have no way of predicting if they will be superconducting. A number of discrete molecular tetrahedral cluster compounds which serve as models for the solid state materials are analyzed. There is a clear indication that tetranuclear and even mononuclear Rh, Ir, and Co arene complexes should be relatively unstable.     

Combination of visible-light responsive heterogeneous and homogeneous photocatalysts for water oxidation

Bismuth vanadate (BiVO(4)), which is a visible-light responsive heterogeneous photocatalyst, was combined with homogeneous ruthenium complexes to increase the overall photocatalytic reactivity for water oxidation with a one-electron oxidant, [Co(III)(NH(3))(5)Cl](2+). Photoinduced electron transfer from the excited state of ruthenium(II) complexes to [Co(III)(NH(3))(5)Cl](2+) affords ruthenium(III) complexes which can oxidize water to oxygen with BiVO(4) under visible light irradiation.     

Mono- and binuclear ruthenium corroles: synthesis,spectroscopy, electrochemistry,and structural characterization

The aim of this research was to prepare mononuclear ruthenium corroles, because of the well-documented potency of analogous porphyrin complexes in catalysis. The syntheses of the mononuclear nitrosyl complexes [Ru(tpfc)(NO)] and [Ru(tdcc)(NO)] (tpfc=trianion of 5,10,15-tris(pentafluorophenyl)corrole, tdcc=trianion of 5,10,15-tris(2,6-dichlorophenyl)corrole), and of the binuclear [[Ru(tpfc)](2)] were achieved by using [[Ru(cod)Cl(2)](x)] (cod=cyclooctadiene) as the metal source. The NMR spectra of all three complexes clearly demonstrate that they are diamagnetic; this is consistent with a triple bond between the metal ions in [[Ru(tpfc)](2)] and is expected for classical [MNO](6) complexes. These features were further substantiated by the stretching frequencies of the [MNO] moieties, electrochemical measurements on all complexes, and the X-ray crystal structures of [Ru(tpfc)(NO)] and [[Ru(tpfc)](2)]. A comparison of the spectroscopic and structural characteristics of these new complexes with analogous iron corroles, as well as with iron and ruthenium porphyrins, suggests that it will be hard to obtain mononuclear ruthenium corroles without pi-accepting ligands.     

Density functional theory analysis of the interplay between Jahn-Teller instability, uniaxial magnetism, spin arrangement, metal-metal interaction, and spin-orbit coupling in Ca3CoMO6 (M = Co, Rh, Ir)

In the isostructural oxides Ca(3)CoMO(6) (M = Co, Rh, Ir), the CoMO(6) chains made up of face-sharing CoO(6) trigonal prisms and MO(6) octahedra are separated by Ca atoms. We analyzed the magnetic and electronic properties of these oxides on the basis of density functional theory calculations including on-site repulsion and spin-orbit coupling, and examined the essential one-electron pictures hidden behind results of these calculations. Our analysis reveals an intimate interplay between Jahn-Teller instability, uniaxial magnetism, spin arrangement, metal-metal interaction, and spin-orbit coupling in governing the magnetic and electronic properties of these oxides. These oxides undergo a Jahn-Teller distortion, but their distortions are weak, so that their trigonal-prism Co(n+) (n = 2, 3) ions still give rise to strong easy-axis anisotropy along the chain direction. As for the d-state split pattern of these ions, the electronic and magnetic properties of Ca(3)CoMO(6) (M = Co, Rh, Ir) are consistent with d(0) < (d(2), d(-2)) < (d(1), d(-1)) but not with (d(2), d(-2)) < d(0) < (d(1), d(-1)). The trigonal-prism Co(3+) ion in Ca(3)Co(2)O(6) has the L = 2 configuration (d(0))(1)(d(2), d(-2))(3)(d(1), d(-1))(2) because of the metal-metal interaction between adjacent Co(3+) ions in each Co(2)O(6) chain, which is mediated by their z(2) orbitals, and the spin-orbit coupling of the trigonal-prism Co(3+) ion. The spins in each CoMO(6) chain of Ca(3)CoMO(6) prefer the ferromagnetic arrangement for M = Co and Rh but the antiferromagnetic arrangement for M = Ir. The octahedral M(4+) ion of Ca(3)CoMO(6) has the (1a)(1)(1e)(4) configuration for M = Rh but the (1a)(2)(1e)(3) configuration for M = Ir, which arises from the difference in the spin-orbit coupling of the M(4+) ions and the Co···M metal-metal interactions.     

Thin-layer chromatographic separation of rhodium(III) and iridium(III, IV) by anion exchange

Summary The TLC behaviour of Rh(III), Ir(III) and Ir(IV) has been investigated in the two systems consisting of DEAE-cellulose or ECTEOLA-cellulose and 5 M HCl media containing H₂O₂. These systems, especially in combination with a simple chemical pretreatment of samples (with LiCl, HCl and H₂O₂), can effectively be applied to the complete separation of mixtures of Rh(III) and Ir(III) or Ir(IV) in a wide range of ratios and amounts (Rh: Ir=1100 to 1001).

---

Dünnschicht-chromatographische Trennung von Rhodium(III) und Iridium(III, IV) durch Anionenaustausch

Zusammenfassung Das dünnschicht-chromatographische Verhalten von Rh(III), Ir(III) und Ir(IV) wurde in H₂O₂-haltiger 5 M salzsaurer Lösung auf DEAE-sowie ECTEOLA-Cellulose untersucht. In Kombination mit einer einfachen chemischen Vorbehandlung der Probe (mit LiCl, HCl, H₂O₂) kann eine wirkungsvolle Trennung von Rh(III) und Ir(III) oder Ir(IV) über einen weiten Konzentrationsbereich erzielt werden (Rh: Ir=1100 bis 1001).

     

Clarification of the oxidation state of cobalt corroles in heterogeneous and homogeneous catalytic reduction of dioxygen

Co(III) corroles were investigated as efficient catalysts for the reduction of dioxygen in the presence of perchloric acid in both heterogeneous and homogeneous systems. The investigated compounds are (5,10,15-tris(pentafluorophenyl)corrole)cobalt (TPFCor)Co, (10-pentafluorophenyl-5,15-dimesitylcorrole)cobalt (F 5PhMes 2Cor)Co, and (5,10,15-trismesitylcorrole)cobalt (Mes 3Cor)Co, all of which contain bulky substituents at the three meso positions of the corrole macrocycle. Cyclic voltammetry and rotating ring-disk electrode voltammetry were used to examine the catalytic activity of the compounds when adsorbed on the surface of a graphite electrode in the presence of 1.0 M perchloric acid, and this data is compared to results for the homogeneous catalytic reduction of O 2 in benzonitrile containing 10 (-2) M HClO 4. The corroles were also investigated as to their redox properties in nonaqueous media. A reversible one-electron oxidation occurs at E 1/2 values between 0.42 and 0.89 V versus SCE depending upon the solvent and number of fluorine substituents on the compounds, and this is followed by a second reversible one-electron abstraction at E 1/2 = 0.86 to 1.18 V in CH 2Cl 2, THF, or PhCN. Two reductions of each corrole are also observed in the three solvents. A linear relationship is observed between E 1/2 for oxidation or reduction and the number of electron-withdrawing fluorine groups on the compounds, and the magnitude of the substituent effect is compared to what is observed in the case of tetraphenylporphyrins containing meso -substituted C 6F 5 substituents. The electrochemically generated forms of the corrole can exist with Co(I), Co(II), or Co(IV) central metal ions, and the site of the electron-transfer in each oxidation or reduction of the initial Co(III) complex was examined by UV-vis spectroelectrochemistry. ESR characterization was also used to characterize singly oxidized (F 5PhMes 2Cor)Co, which is unambiguously assigned as a Co(III) radical cation rather than the expected Co(IV) corrole with an unoxidized macrocyclic ring.     

Four-electron oxygen reduction by brominated cobalt corrole

The carbon-supported cobalt(III) complex of β-pyrrole-brominated 5,10,15-tris(pentafluorophenyl)corrole [Co(tpfc)Br(8)/C] is introduced as a nonplatinum alternative for electrocatalytic oxygen reduction in aqueous solutions. Through systematic work, the basic kinetic parameters of this reaction were studied, using rotating ring disk electrode electrochemical methods in the pH range of 0-11. Pronounced catalytic activity was detected in acid solutions along with shifts of the Co(II)/Co(III) and O(2) redox couples to more positive values (onset of 0.56 V at pH 0). A series of independent measurements have been used to prove that the dominant mechanism for oxygen reduction by Co(tpfc)Br(8)/C catalysis is the direct four-electron pathway to water.     

High-valent iron and manganese complexes of corrole and porphyrin in atom transfer and dioxygen evolving catalysis

Manganese(V) imido complexes of 5,10,15-tris(pentafluorophenyl)corrole (H(3)tpfc) can be prepared by the reaction of Mn(III)(tpfc) and organic nitrene generated from either photolytic or thermal activation of organic azides. The terminal imido complexes of manganese(V) were among the first structurally characterized examples of Mn(V) terminal imido complexes in the literature. They feature a short Mn≡N triple bond and a nearly linear M[triple bond, length as m-dash]N-C angle. The ground state of (tpfc)Mn(V)(NAr) is singlet. Contrary to expectations, arylimido complexes of manganese(V) were stable to moisture and did not undergo [NR] group transfer to olefins. Manganese(V) imido corrole with an activated tosyl imido ligand was prepared from iodoimine (ArINTs) and manganese(III) corrole. The resulting complex (tpfc)Mn(NTs) is paramagnetic (S = 1), hydrolyzes to (tpfc)Mn(O) in the presence of water, abstracts hydrogen atoms from benzylic C-H bonds, and catalyzes aziridination of alkenes. Mechanistic studies on the aziridination and hydrogen atom transfer reactions are reviewed. This perspective also describes the reaction chemistry of the heme enzyme chlorite dismutase, the mechanism by which dioxygen is formed on a single-metal site, and recent advances in functional modelling of this enzyme. We also compare the reactivity of water-soluble iron versus manganese porphyrins towards the chlorite anion.     

Group 9 Chalcogenometalates

The compounds [K(18-crown-6)](3)[Ir(Se(4))(3)] (1), [K(2.2.2-cryptand)](3)[Ir(Se(4))(3)].C(6)H(5)CH(3) (2), and [K(18-crown-6)(DMF)(2)][Ir(NCCH(3))(2)(Se(4))(2)] (3) (DMF = dimethylformamide) have been prepared from the reaction of [Ir(NCCH(3))(2)(COE)(2)][BF(4)] (COE = cyclooctene) with polyselenide anions in acetonitrile/DMF. Analogous reactions utilizing [Rh(NCCH(3))(2)(COE)(2)][BF(4)] as a Rh source produce homologues of the Ir complexes; these have been characterized by (77)Se NMR spectroscopy. [NH(4)](3)[Ir(S(6))(3)].H(2)O.0.5CH(3)CH(2)OH (4) has been synthesized from the reaction of IrCl(3).nH(2)O with aqueous (NH(4))(2)S(m)(). In the structure of [K(18-crown-6)](3)[Ir(Se(4))(3)] (1) the Ir(III) center is chelated by three Se(4)(2)(-) ligands to form a distorted octahedral anion. The structure contains a disordered racemate of the Deltalambdalambdalambda and Lambdadeltadeltadelta conformers. The K(+) cations are pulled out of the planes of the crowns and interact with Se atoms of the [Ir(Se(4))(3)](3)(-) anion. [K(2.2.2-cryptand)](3)[Ir(Se(4))(3)].C(6)H(5)CH(3) (2) possesses no short K.Se interactions; here the [Ir(Se(4))(3)](3)(-) anion crystallizes as the Deltalambdalambdadelta/Lambdadeltadeltalambda racemate. In the crystal structure of [K(18-crown-6)(DMF)(2)][Ir(NCCH(3))(2)(Se(4))(2)] (3), the K(+) cation is coordinated by an 18-crown-6 ligand and two DMF molecules and the anion comprises an octahedral Ir(III) center bound by two chelating Se(4)(2)(-) chains and two trans acetonitrile groups. The [Ir(Se(4))(3)](3)(-) and [Rh(Se(4))(3)](3)(-) anions undergo conformational transformations as a function of temperature, as observed by (77)Se NMR spectroscopy. The thermodynamics of these transformations are: [Ir(Se(4))(3)](3)(-), DeltaH = 2.5(5) kcal mol(-)(1), DeltaS = 11.5(2.2) eu; [Rh(Se(4))(3)](3)(-), DeltaH = 5.2(7) kcal mol(-)(1), DeltaS = 24.7(3.0) eu.     

Chloroform extraction of metal ethyl xanthates from hydrochloric acid media

The chloroform extraction of 32 elements (Fe, Co, Ni, Zn, Cd, Ge, Sn, Pb, V, As, Sb, Bi, Cu, Ag, Au, Mn, Re, Ga, In, Tl, Ce, Se, Te, Cr, Mo, U, Pt, Pd, Rh, Ir, Ru and Os) from O.1-10M hydrochloric acid media in the presence of potassium ethyl xanthate has been studied. The oxidation states in which some elements react, and potential analytical separations, are discussed. Pd(II), As(III) and Se(IV) are completely extracted as ethyl xanthate complexes, Te(IV) is almost completely extracted, and Au(III) is largely extracted over the range of acid concentration investigated. Mn(II), Zn, Rh(III), Ir(IV), Ru(III), Os(IV), Cr(III), Cr(VI), Ce(III) and Ce(IV) are not extracted. Ge is partly extracted from 6-10M media as the chloro-complex. Depending on the acid concentration, the remaining elements are all partially extracted as xanthate complexes.     

Anion-exchange TLC of rhodium(III) and iridium(III,IV) on DEAE-cellulose or ECTEOLA-cellulose

Summary The TLC behaviour and separation of Rh(III), Ir(III) and Ir(IV) has been investigated in the two systems composed of DEAE-cellulose or ECTEOLA-cellulose using 3 M or 5 M HCl containing NaClO₃ as solvent. These systems, especially in combination with a sample treatment with LiCl, HCl and H₂O₂ solutions, allow the clean-cut separations of Rh(III) from Ir(III) as well as Ir(IV), coexisting in an extremely wide range of amounts and ratios (RhIr=1500 to 2001). A brief discussion on the characteristic adsorption behaviour of Rh(III), dependent on the previous history of the sample solutions, is also included.

---

Anionenaustausch-Dünnschicht-Chromatographie von Rhodium(III) und Iridium(III, IV) auf DEAE- oder ECTEOLA-Cellulose

Zusammenfassung Zur dünnschicht-chromatographischen Trennung von Rh und Ir wurden DEAE- bzw. ECTEOLA-Cellulose mit 3 M bzw. 5 M NaClO₃-haltiger Salzsäure als Lösungsmittel benutzt. Besonders in Verbindung mit einer Probevorbehandlung mit LiCl, HCl und H₂O₂ konnten mit diesen Systemen scharfe Trennungen von Rh(III), Ir(III) und Ir(IV) in einem weiten Konzentrationsbereich erzielt werden (RhIr=1500 bis 2001). Das Adsorptionsverhalten des Rh(III) in Abhängigkeit von der Vorbehandlung der Probelösung wird diskutiert.

     

High-valent imido complexes of manganese and chromium corroles

The oxidation reaction of M(tpfc) [M = Mn or Cr and tpfc = tris(pentafluorophenyl)corrole] with aryl azides under photolytic or thermal conditions gives the first examples of mononuclear imido complexes of manganese(V) and chromium(V). These complexes have been characterized by NMR, mass spectrometry, UV-vis, EPR, elemental analysis, and cyclic voltammetry. Two X-ray structures have been obtained for Mn(tpfc)(NMes) and Cr(tpfc)(NMes) [Mes = 2,4,6-(CH(3))(3)C(6)H(2)]. Short metal-imido bonds (1.610 and 1.635 Angstroms) as well as nearly linear M-N-C angles are consistent with triple M triple-bond NR bond formation. The kinetics of nitrene [NR] group transfer from manganese(V) corroles to various organic phosphines have been defined. Reduction of the manganese(V) corrolato complex affords phosphine imine and Mn(III) with reaction rates that are sensitive to steric and electronic elements of the phosphine substrate. An analogous manganese complex with a variant corrole ligand containing bromine atoms in the beta-pyrrole positions, Mn(Br(8)tpfc)(NAr), has been prepared and studied. Its reaction with PEt(3) is 250x faster than that of the parent tpfc complex, and its Mn(V/IV) couple is shifted by 370 mV to a more positive potential. The EPR spectra of chromium(V) imido corroles reveal a rich signal at ambient temperature consistent with Cr(V) triple-bond NR (d(1), S = 1/2) containing a localized spin density in the d(xy) orbital, and an anisotropic signal at liquid nitrogen temperature. Our results demonstrate the synthetic utility of organic aryl azides in the preparation of mononuclear metal imido complexes previously considered elusive, and suggest strong sigma-donation as the underlying factor in stabilizing high-valent metals by corrole ligands.     

The synthesis, characterisation and reactivity of 2-phosphanylethylcyclopentadienyl complexes of cobalt, rhodium and iridium

2-Phosphanylethylcyclopentadienyl lithium compounds, Li[C(5)R'(4)(CH(2))(2)PR(2)] (R = Et, R' = H or Me, R = Ph, R' = Me), have been prepared from the reaction of spirohydrocarbons C(5)R'(4)(C(2)H(4)) with LiPR(2). C(5)Et(4)HSiMe(2)CH(2)PMe(2), was prepared from reaction of Li[C(5)Et(4)] with Me(2)SiCl(2) followed by Me(2)PCH(2)Li. The lithium salts were reacted with [RhCl(CO)(2)](2), [IrCl(CO)(3)] or [Co(2)(CO)(8)] to give [M(C(5)R'(4)(CH(2))(2)PR(2))(CO)] (M = Rh, R = Et, R' = H or Me, R = Ph, R' = Me; M = Ir or Co, R = Et, R' = Me), which have been fully characterised, in many cases crystallographically as monomers with coordination of the phosphorus atom and the cyclopentadienyl ring. The values of nu(CO) for these complexes are usually lower than those for the analogous complexes without the bridge between the cyclopentadienyl ring and the phosphine, the exception being [Rh(Cp'(CH(2))(2)PEt(2))(CO)] (Cp' = C(5)Me(4)), the most electron rich of the complexes. [Rh(C(5)Et(4)SiMe(2)CH(2)PMe(2))(CO)] may be a dimer. [Co(2)(CO)(8)] reacts with C(5)H(5)(CH(2))(2)PEt(2) or C(5)Et(4)HSiMe(2)CH(2)PMe(2) (L) to give binuclear complexes of the form [Co(2)(CO)(6)L(2)] with almost linear PCoCoP skeletons. [Rh(Cp'(CH(2))(2)PEt(2))(CO)] and [Rh(Cp'(CH(2))(2)PPh(2))(CO)] are active for methanol carbonylation at 150 degrees C and 27 bar CO, with the rate using [Rh(Cp'(CH(2))(2)PPh(2))(CO)] (0.81 mol dm(-3) h(-1)) being higher than that for [RhI(2)(CO)(2)](-) (0.64 mol dm(-3) h(-1)). The most electron rich complex, [Rh(Cp'(CH(2))(2)PEt(2))(CO)] (0.38 mol dm(-3) h(-1)) gave a comparable rate to [Cp*Rh(PEt(3))(CO)] (0.30 mol dm(-3) h(-1)), which was unstable towards oxidation of the phosphine. [Rh(Cp'(CH(2))(2)PEt(2))I(2)], which is inactive for methanol carbonylation, was isolated after the methanol carbonylation reaction using [Rh(Cp'(CH(2))(2)PEt(2))(CO)]. Neither of [M(Cp'(CH(2))(2)PEt(2))(CO)] (M = Co or Ir) was active for methanol carbonylation under these conditions, nor under many other conditions investigated, except that [Ir(Cp'(CH(2))(2)PEt(2))(CO)] showed some activity at higher temperature (190 degrees C), probably as a result of degradation to [IrI(2)(CO)(2)](-). [M(Cp'(CH(2))(2)PEt(2))(CO)] react with MeI to give [M(Cp'(CH(2))(2)PEt(2))(C(O)Me)I] (M = Co or Rh) or [Ir(Cp'(CH(2))(2)PEt(2))Me(CO)]I. The rates of oxidative addition of MeI to [Rh(C(5)H(4)(CH(2))(2)PEt(2))(CO)] and [Rh(Cp'(CH(2))(2)PPh(2))(CO)] are 62 and 1770 times faster than to [Cp*Rh(CO)(2)]. Methyl migration is slower, however. High pressure NMR studies show that [Co(Cp'(CH(2))(2)PEt(2))(CO)] and [Cp*Rh(PEt(3))(CO)] are unstable towards phosphine oxidation and/or quaternisation under methanol carbonylation conditions, but that [Rh(Cp'(CH(2))(2)PEt(2))(CO)] does not exhibit phosphine degradation, eventually producing inactive [Rh(Cp'(CH(2))(2)PEt(2))I(2)] at least under conditions of poor gas mixing. The observation of [Rh(Cp'(CH(2))(2)PEt(2))(C(O)Me)I] under methanol carbonylation conditions suggests that the rhodium centre has become so electron rich that reductive elimination of ethanoyl iodide has become rate determining for methanol carbonylation. In addition to the high electron density at rhodium.     

A Short Review of the Separation of Iridium and Rhodium from Hydrochloric Acid Solutions by Solvent Extraction

Iridium and rhodium are among the platinum group metals. The properties, production processes, and aqueous chemistry of both metals are reviewed. The separation of Ir(IV) and Rh(III) from hydrochloric acid solution is dependent on the characteristics of the solvent extraction systems. In most of the extraction conditions, Ir(IV) is selectively extracted over Rh(III) by either amines or neutral extractants. Rh(I) can be selectively extracted over Ir(III) by neutral extractants after Rh(III) is reduced in the presence of a reducing agent. The separation of these two metals using cationic extractants has also been reported. Although selective extraction of one metal over the other is possible, more efficient solvent extraction systems need to be developed.     

Tunability of the M(II)M(III)/M(II)(2) and M(III)(2)/M(II)M(III) (M=Mn, Co) couples in bis-μ-O,O'-carboxylato-μ-OR bridged complexes

A comparison of the electrochemical properties of a series of dinuclear complexes [M(2)(L)(RCO(2))(2)](+) with M = Mn or Co, L = 2,6-bis(N,N-bis-(2-pyridylmethyl)-sulfonamido)-4-methylphenolato (bpsmp(-)) or 2,6-bis(N,N-bis(2-pyridylmethyl)aminomethyl)-4-tert-butylphenolato (bpbp(-)) and R = H, CH(3), CF(3) or 3,4-dimethoxybenzoate demonstrates: (i) The electron-withdrawing sulfonyl groups in the backbone of bpsmp(-) stabilize the [M(2)(bpsmp)(RCO(2))(2)](+) complexes in their M(II)(2) oxidation state compared to their [M(2)(bpbp)(RCO(2))(2)](+) analogues. Manganese complexes are stabilised by approximately 550 mV and cobalt complexes by 650 mV. (ii) The auxiliary bridging carboxylato ligands further attenuate the metal-based redox chemistry. Substitution of two acetato for two trifluoroacetato ligands shifts redox couples by 300-400 mV. Within the working potential window, reversible or quasi-reversible M(II)M(III)? M(II)(2) processes range from 0.31 to 1.41 V for the [Co(2)(L)(RCO(2))(2)](+/2+) complexes and from 0.54 to 1.41 V for the [Mn(2)(L)(RCO(2))(2)](+/2+) complexes versus Ag/AgCl for E(M(II)M(III)/M(II)(2)). The extreme limits are defined by the complexes [M(2)(bpbp)(CH(3)CO(2))(2)](+) and [M(2)(bpsmp)(CF(3)CO(2))(2)](+) for both metal ions. Thus, tuning the ligand field in these dinuclear complexes makes possible a range of around 0.9 V and 1.49 V for the one-electron E(M(II)M(III)/M(II)(2)) couple of the Mn and Co complexes, respectively. The second one-electron process, M(II)M(III)? M(III)(2) was also observed in some cases. The lowest potential recorded for the E°(M(III)(2)/M(II)M(III)) couple was 0.63 V for [Co(2)(bpbp)(CH(3)CO(2))(2)](2+) and the highest measurable potential was 2.23 V versus Ag/AgCl for [Co(2)(bpsmp)(CF(3)CO(2))(2)](2+).     

15N NMR coordination shifts in Pd(II), Pt(II), Au(III), Co(III), Rh(III), Ir(III), Pd(IV), and Pt(IV) complexes with pyridine, 2,2'-bipyridine, 1,10-phenanthroline, quinoline, isoquinoline, 2,2'-biquinoline, 2,2':6', 2'-terpyridine and their alkyl or aryl derivatives

The 15N NMR data for 105 complexes of Pd(II), Pt(II), Au(III), Co(III), Rh(III), Ir(III), Pd(IV), and Pt(IV) complexes with simple azines such as pyridine, 2,2'-bipyridine, 1,10-phenanthroline, quinoline, isoquinoline, 2,2'-biquinoline, 2,2':6', 2'-terpyridine and their alkyl or aryl derivatives have been reviewed. The 15N NMR coordination shifts, i.e. the differences between the 15N chemical shifts of the same nitrogen in the molecules of the complex and the ligand (Delta(15N) (coord) = delta(15N) (compl)--delta(15N) (lig)), have been related to some structural features of the reviewed coordination compounds, like the type of the central ion and the character of auxiliary ligands (mainly in trans position). These Delta(15N) (coord) parameters are negative, their absolute magnitudes (ca 30-150 ppm) generally increasing in the metal order Au(III) < Pd(II) < Pt(II) and Rh(III) < Co(III) < Pt(IV) < Ir(III), as well as with the enhanced trans influence of the other donor atoms (H, C < Cl < N).     

Hexacyanometalate molecular chemistry: heptanuclear heterobimetallic complexes; control of the ground spin state

Following a bottom-up approach to nanomaterials, we present a rational synthetic route from hexacyanometalates [M(CN)(6)](3-) (M=Cr(III), Co(III)) cores to well-defined heptanuclear complexes. By changing the nature of the metallic cations and using a localised orbital model it is possible to control and to tune the ground state spin value. Thus, with M=Cr(III), d(3), S=3/2, three heptanuclear species were built and characterised by mass spectrometry in solution, by single-crystal X-ray diffraction and by powder magnetic susceptibility measurements, [Cr(III)(CNbondM'L(n))(6)](9+) (M'=Cu(II), Ni(II), Mn(II), L(n)=polydentate ligand), showing spin ground states S(G)=9/2 [Cu(II)], with ferromagnetic interactions J(Cr,Cu)=+45 cm(-1), S(G)=15/2 [Ni(II)] and J(Cr,Ni)=+17.3 cm(-1), S(G)=27/2 [Mn(II)], with an antiferromagnetic interaction J(Cr,Mn)=-9 cm(-1), (interaction Hamiltonian H=-J(Cr,M) [S(Cr)Sigma(i)S(M)(i)], i=1-6). With M=Co(III), d(6), S=0, the heptanuclear analogues [Co(III)(CN-M'L(n))(6)](9+) (M'=Cu(II), Ni(II), Mn(II)) were similarly synthesised and studied. They present a singlet ground state and allow us to evaluate the weak antiferromagnetic coupling constant between two next-nearest neighbours M'-Co-M'.     

Trifluorosulfane ligand as an analogue of the nitrosyl ligand: highly exothermic fluorine transfer reactions from sulfur to metal in the chemistry of SF3 metal carbonyls of the first row transition metals

The variety of known very stable PF(3) metal derivatives analogous to metal carbonyls suggests the synthesis of SF(3) metal derivatives analogous to metal nitrosyls. However, the only known SF(3) metal complex is the structurally uncharacterized (Et(3)P)(2)Ir(CO)(Cl)(F)(SF(3)) synthesized by Cockman, Ebsworth, and Holloway in 1987 and suggested by electron counting to have a one-electron donor SF(3) group rather than a three-electron donor SF(3) group. In this connection, the possibility of synthesizing SF(3) metal derivatives analogous to metal nitrosyls has been investigated using density functional theory. The [M]SF(3) derivatives with [M] = V(CO)(5), Mn(CO)(4), Co(CO)(3), Ir(CO)(3), (C(5)H(5))Cr(CO)(2), (C(5)H(5))Fe(CO), and (C(5)H(5))Ni analogous to known metal nitrosyl derivatives are all predicted to be thermodynamically disfavored with respect to the corresponding [M](SF(2))(F) derivatives by energies ranging from 19.5 kcal/mol for Mn(SF(3))(CO)(4) to 5.4 kcal/mol for Co(SF(3))(CO)(3). By contrast, the isoelectronic [M]PF(3) derivatives with [M] = Cr(CO)(5), Fe(CO)(4), Ni(CO)(3), (C(5)H(5))Mn(CO)(2), (C(5)H(5))Co(CO), and (C(5)H(5))Cu are all very strongly thermodynamically favored with respect to the corresponding [M](PF(2))(F) derivatives by energies ranging from 64.3 kcal/mol for Cr(PF(3))(CO)(5) to 31.6 kcal/mol for (C(5)H(5))Co(PF(3))(CO). The known six-coordinate (Et(3)P)(2)Ir(CO)(Cl)(F)(SF(3)) is also predicted to be stable relative to the seven-coordinate (Et(3)P)(2)Ir(CO)(Cl)(F)(2)(SF(2)). Most of the metal SF(3) complexes found in this work are singlet structures containing three-electron donor SF(3) ligands with tetrahedral sulfur coordination. However, two examples of triplet spin state metal SF(3) complexes, namely, the lowest energy (C(5)H(5))Fe(SF(3))(CO) structure and a higher energy Co(SF(3))(CO)(3) structure, are found containing one-electron donor SF(3) ligands with pseudo square pyramidal sulfur coordination with a stereochemically active lone electron pair.