Nitrogen-14 NMR Study on Solvent Exchange of the Octahedral Cobalt(II) Ion in Neat 1,3-Propanediamine and n-Propylamine at Various Temperatures and Pressures. Tetrahedral-Octahedral Equilibrium of the Solvated Cobalt(II) Ion in n-Propylamine As Studied by EXAFS and Electronic Absorption Spectroscopy

Solvated cobalt(II) ions in neat 1,3-propanediamine (tn) and n-propylamine (pa) have been characterized by electronic absorption spectroscopy and extended X-ray absorption fine structure (EXAFS) spectroscopy. The equilibrium between tetrahedral and octahedral geometry for cobalt(II) ion has been observed in a neat pa solution, but not in neat diamine solutions such as tn and ethylenediamine (en). The thermodynamic parameters and equilibrium constant at 298 K for the geometrical equilibrium in pa were determined to be DeltaH degrees = -36.1 +/- 2.3 kJ mol(-1), DeltaS degrees = -163 +/- 8 J mol(-1) K(-1), and K(298) = 6.0 x 10(-3) M(-2), where K = [Co(pa)(6)(2+)]/{[Co(pa)(4)(2+)][pa](2)}. The equilibrium is caused by the large entropy gain in formation of the tetrahedral cobalt(II) species. The solvent exchange of cobalt(II) ion with octahedral geometry in tn and pa solutions has been studied by the (14)N NMR line-broadening method. The activation parameters and rate constants at 298 K for the solvent exchange reactions are as follows: DeltaH() = 49.3 +/- 0.9 kJ mol(-1), DeltaS() = 25 +/- 3 J mol(-1) K(-1), DeltaV() = 6.6 +/- 0.3 cm(3) mol(-1) at 302.1 K, and k(298) = 2.9 x 10(5) s(-1) for the tn exchange, and DeltaH() = 36.2 +/- 1.2 kJ mol(-1), DeltaS() = 35 +/- 6 J mol(-1) K(-1), and k(298) = 2.0 x 10(8) s(-1) for the pa exchange. By comparison of the activation parameters with those for the en exchange of cobalt(II) ion, it has been confirmed that the kinetic chelate strain effect is attributed to the large activation enthalpy for the bidentate chelate opening and that the enthalpic effect is smaller in the case of the six-membered tn chelate compared with the five-membered en chelate.     

Kinetic investigations of the process of encapsulation of small hydrocarbons into a cavitand-porphyrin

Exchange of guest molecules into capsule shaped host molecules is the most fundamental process in host-guest chemistry. Several examples of quantitative measurements of guest exchange rates have been reported. However, there have been no reports on the activation energies of these processes. A molecule known as cavitand-porphyrin (H2CP) has been reported to have a flexible host structure capable of facilitating moderate guest exchange rates suitable for kinetic measurements of the guest exchange process with 1H NMR. In this article, various kinetic and thermodynamic parameters related to the process of encapsulation of small hydrocarbons into H2CP in CDCl3 solution were determined by 2D exchange spectroscopy (EXSY): association and dissociation rate constants (k(ass) = 320 M-1 s-1, k(diss) = 1.4 s-1 for methane at 25 degrees C), the corresponding activation energies (E(a,ass) = 27 kJ.mol-1, E(a,diss) = 58 kJ.mol-1), and thermodynamic parameters for each process (DeltaG++(ass) = 59 kJ.mol-1, DeltaG++(diss) = 72 kJ.mol-1, DeltaH++(ass) = 25 kJ.mol-1, DeltaH++(diss) = 55 kJ.mol-1, DeltaS++(ass) = -113 J.K-1.mol-1, and DeltaH++(diss) = 58 J.K-1.mol-1 for methane). The thermodynamic parameters (DeltaG degrees = -13 kJ.mol-1, DeltaH degrees = -31 kJ.mol-1, DeltaS degrees = -60 J.K-1.mol-1 for methane) for this encapsulation equilibrium determined by EXSY were comparable to those for methane determined by 1D 1H NMR titration (DeltaG degrees = -11 kJ.mol-1, DeltaH degrees = -33 kJ.mol-1, DeltaS degrees = -75 J.K-1.mol-1 for methane). In addition, the structure of the methane encapsulation process was revealed by ab initio MO calculations. The activation energies for methane association/dissociation were estimated from MP2 calculations (E(a,ass) = 58.3 kJ.mol-1, E(a,diss) = 89.1 kJ.mol-1, and DeltaH degrees = -30.8 kJ.mol-1). These values are in accord with the experimentally determined values. The observed guest exchange rates and energies are compared with the corresponding values of various reported capsule-shaped hosts.     

Studies of the kinetics and thermochemistry of the forward and reverse reaction Cl + C6H6 = HCl + C6H5

The laser flash photolysis resonance fluorescence technique was used to monitor atomic Cl kinetics. Loss of Cl following photolysis of CCl4 and NaCl was used to determine k(Cl + C6H6) = 6.4 x 10(-12) exp(-18.1 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 578-922 K and k(Cl + C6D6) = 6.2 x 10(-12) exp(-22.8 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 635-922 K. Inclusion of literature data at room temperature leads to a recommendation of k(Cl + C6H6) = 6.1 x 10(-11) exp(-31.6 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) for 296-922 K. Monitoring growth of Cl during the reaction of phenyl with HCl led to k(C6H5 + HCl) = 1.14 x 10(-12) exp(+5.2 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 294-748 K, k(C6H5 + DCl) = 7.7 x 10(-13) exp(+4.9 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 292-546 K, an approximate k(C6H5 + C6H5I) = 2 x 10(-11) cm(3) molecule(-1) s(-1) over 300-750 K, and an upper limit k(Cl + C6H5I) < or = 5.3 x 10(-12) exp(+2.8 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 300-750 K. Confidence limits are discussed in the text. Third-law analysis of the equilibrium constant yields the bond dissociation enthalpy D(298)(C6H5-H) = 472.1 +/- 2.5 kJ mol(-1) and thus the enthalpy of formation Delta(f)H(298)(C6H5) = 337.0 +/- 2.5 kJ mol(-1).     

Determination of interconversion barriers by dynamic gas chromatography: epimerization of chalcogran

The four stereoisomers of chalcogran 1 ((2RS,SRS)-2-ethyl-1,6-di-oxaspiro[4.4]nonane), the principal component of the aggregation pheromone of the bark beetle pityogenes chalcographus, are prone to interconversion at the spiro center (C5). During diastereo- and enantioselective dynamic gas chromatography (DGC), epimerization of 1 gives rise to two independent interconversion peak profiles, each featuring a plateau between the peaks of the interconverting epimers. To determine the rate constants of epimerization by dynamic gas chromatography (DGC), equations to simulate the complex elution profiles were derived, using the theoretical plate model and the stochastic model of the chromatographic process. The Eyring activation parameters of the experimental interconversion profiles, between 70 and 120 C in the presence of the chiral stationary phase (CSP) Chirasil-beta-Dex, were then determined by computer-aided simulation with the aid of the new program Chrom-Win: (2R,5R)-1: deltaG(++) (298.15 K) = 108.0 +/-0.5 kJ mol(-1), deltaH(++) = 47.1+/-0.2 kJ mol(-1), deltaS(++) = -204+/-6 JK(-1) mol(-1): (2R,5S)-1: deltaG(++) (298.15 K) = 108.5+/-0.5 kJ mol(-1), deltaH(++) = 45.8+/-0.2 kJ mol(-1), deltaS(++) = -210 +/-6 J K mol(-1); (2S,5S)-1: deltaG(++) (298.15 K)= 108.1+/-0.5 kJ mol(-1), deltaH(++) = 49.3+/-0.3 kJ mol(-1), deltaS(++) = -197+/-8 J K(-1) mol(-1); (2S,5R)-1: deltaG(++) (298.15 K)=108.6+/-0.5 kJ mol(-1), deltaH(++) = 48.0+/-0.3 kJ mol(-1), deltaS(++) = -203+/-8 J K(-1) mol(-1). The thermodynamic Gibbs free energy of the E/Z equilibrium of the epimers was determined by the stopped-flow multidimensional gas chromatographic technique: deltaG(E/Z) (298.15 K)= -0.5 kJ mol(-1), deltaH(E/Z) = 1.4 kJ mol(-1) and deltaS(E/Z) = 6.3 J K(-1) mol(-1). An interconversion pathway proceeding through ring-opening and formation of a zwitterion and an enol ether/alcohol intermediate of 1 is proposed.     

Water exchange in fluoroaluminate complexes in aqueous solution: a variable temperature multinuclear NMR study

An 17O, 19F, and 27Al NMR study of fluoroaluminate complexes (AlFn(H2O)6-n((3-n)+), n = 0, 1, and 2) in aqueous solution supports the idea that for each substitution of a bound water molecule by a fluoride anion, the exchange rate of bound water with free water increases by about 2 orders of magnitude. New rate coefficients for exchange of inner-sphere water molecules in AlF(H2O)5(2+) are kex(298) = 230(+/-20) s(-1), DeltaH(dagger) = 65(+/-3) kJ mol(-1), and DeltaS(dagger) = 19(+/-10) J mol(-1) K(-1). The corresponding new values for the AlF2(H2O)4(+) complex are: kex(298) = 17 100(+/-500) s(-1), DeltaH(dagger) = 66(+/-2) kJ mol(-1), and DeltaS(dagger) = 57(+/-8) J mol(-1) K(-1). When these new results are combined with those of our previous study,(4) we find no dependence of the solvent exchange rate, in either AlF(H2O)5(2+) or AlF2(H2O)4(+), on the concentration of fluoride or protons over the range of SigmaF = 0.06-0.50 M and [H(+)] = 0.01-0.44 M. A paramagnetic shift of 27Al resonances results from addition of Mn(II) to the aqueous solution as a relaxation agent for bulk waters. This shift allows resolution of the AlFn(H2O)6-n((3-n)+) species in 27Al NMR spectra and comparison of the speciation determined via thermodynamic calculations with that determined by 27Al, 19F, and 17O NMR.     

Synthesis, structure, and substitution mechanism of new Ru(II) complexes containing 1,4,7-trithiacyclononane and 1,10-phenanthroline ligands

Two new Ru complexes containing the 1,10-phenanthroline (phen) and 1,4,7-trithiacyclononane ([9]aneS3, SCH2CH2SCH2CH2SCH2CH2) ligands of general formula [Ru(phen)(L)([9]aneS3)]2+ (L = MeCN, 3; L = pyridine (py), 4) have been prepared and thoroughly characterized. Structural characterization in the solid state has been performed by means of X-ray diffraction analyses, which show a distorted octahedral environment for a diamagnetic d6 Ru(II), as expected. 1H NMR spectroscopy provides evidence that the same structural arrangement is maintained in solution. Further spectroscopic characterization has been carried out by UV-vis spectroscopy where the higher acceptor capability of MeCN versus the py ligand is manifested in a 9-15-nm blue shift in its MLCT bands. The E1/2 redox potential of the Ru(III)/Ru(II) couple for 3 is anodically shifted with respect to its Ru-py analogue, 4, by 60 mV, which is also in agreement with a higher electron-withdrawing capacity of the former. The mechanism for the reaction Ru-py + MeCN--> Ru-MeCN + py has also been investigated at different temperatures with and without irradiation. In the absence of irradiation at 326 K, the thermal process gives kinetic constants of k2 = 1.4 x 10(-5) s(-1) (DeltaH(++) = 108 +/- 3 kJ mol(-1), DeltaS(++) = -8 +/- 9 J K(-1) mol(-1)) and k-2 = 2.9 x 10(-6) s(-1) (DeltaH(++) = 121 +/- 1 kJ mol(-1), DeltaS(++) = 18 +/- 3 J K(-1) mol(-1)). The phototriggered process is faster and consists of preequilibrium formation of an intermediate that thermally decays to the final Ru-MeCN complex with an apparent rate constant of (k1Khnu)app = 1.8 x 10(-4) s(-1) at 304 K, under the continuous irradiation experimental conditions used.     

Copper(I)-dioxygen reactivity of [(L)Cu(I)](+) (L = tris(2-pyridylmethyl)amine): kinetic/thermodynamic and spectroscopic studies concerning the formation of Cu-O2 and Cu2-O2 adducts as a function of solvent medium and 4-pyridyl ligand substituent variations

The kinetic and thermodynamic behavior of O(2)-binding to Cu(I) complexes can provide fundamental understanding of copper(I)/dioxygen chemistry, which is of interest in chemical and biological systems. Here we report stopped-flow kinetic investigations of the oxygenation reactions of a series of tetradentate copper(I) complexes [(L(R))Cu(I)(MeCN)](+) (1(R), R=H, Me, tBu, MeO, Me(2)N) in propionitrile (EtCN), tetrahydrofuran (THF), and acetone. The syntheses of 4-pyridyl substituted tris(2-pyridylmethyl)amine ligands (L(R)) and copper(I) complexes are detailed. Variations of ligand electronic properties are manifested in the electrochemistry of 1(R) and nu(CO) of [(L(R))Cu(I)-CO](+) complexes. The kinetic studies in EtCN and THF show that the O(2)-reactions of 1(R) follow the reaction mechanism established for oxygenation of 1(H) in EtCN (J. Am. Chem. Soc. 1993, 115, 9506), involving reversible formation (k(1)/k(-1)) of [(L(R))Cu(II)(O(2-))](+) (2(R)), which further reacts (k(2)/k(-2)) with 1(R) to form the 2:1 Cu(2)O(2) complex [[(L(R))Cu(II)](2)(O(2)(2-))](2+) (3(R)). In EtCN, the rate constants for formation of 2(R) (k(1)) are not dramatically affected by the ligand electronic variations. For R = Me and tBu, the kinetic and thermodynamic parameters are very similar to those of the parent complex (1(H)); e.g., k(1) is in the range 1.2 x 10(4) to 3.1 x 10(4) M(-1) s(-1) at 183 K. With the stronger donors R = MeO and Me(2)N, more significant effects were observed, with the expected increase in thermodynamic stability of resultant 2(R) and 3(R) complexes, and decreased dissociation rates. The modest ligand electronic effects manifested in EtCN are due to the competitive binding of solvent and dioxygen to the copper centers. In THF, a weakly coordinating solvent, the formation rate for 2(H) is much faster (>/=100 times) than that in EtCN, and the thermodynamic stabilities of both the 1:1 (K(1)) and 2:1 (beta = K(1)K(2)) copper-dioxygen species are much higher than those in EtCN (e.g., for 2(H), deltaH(o) (K(1))=-41 kJ mol(-1) in THF versus -29.8 kJ mol(-1) in EtCN; for 3(H), deltaH(o) (beta)=-94 kJ mol(-1) in THF versus -77 kJ mol(-1) in EtCN). In addition, a more significant ligand electronic effect is seen for the oxygenation reactions of 1(MeO) in THF compared to that in EtCN; the thermal stability of superoxo- and peroxocopper complexes are considerably enhanced using L(MeO) compared to L(H). In acetone as solvent, a different reaction mechanism involving dimeric copper(I) species [(L(R))(2)Cu(I)(2)](2+) is proposed for the oxygenation reactions, supported by kinetic analyses, electrical conductivity measurements, and variable-temperature NMR spectroscopic studies. The present study is the first systematic study investigating both solvent medium and ligand electronic effects in reactions forming copper-dioxygen adducts.     

Thermal decomposition of ClOOCl

ClOOCl was prepared in situ in a temperature controlled photoreactor (v = 420 L) by photolyzing OClO/N2 mixtures in the wavelength range 300-500 nm at temperatures between 242 and 261 K and total pressures between 2 and 480 mbar. After switching off the lights, excess NO2 was added, and IR and UV spectra were monitored simultaneously as a function of time. By spectral stripping of all other known UV absorbers (in particular, other chlorine oxides and chlorine nitrate), we determined rate constants k-1 of the reaction ClOOCl (+M) --> ClO + ClO (+M) from the first-order decay of the residual UV absorption of ClOOCl at 246 and 255 nm. k-1,0 = [N2] x 7.6 x 10(-9) exp[(-53.6 +/- 6.0) kJ mol(-1)/RT] cm3 molecule(-1) s(-1) (2sigma) was derived for the low-pressure limiting rate constant. Application of Troe's expression for the limiting low-pressure rate constants of unimolecular decomposition reactions leads to E0 = Delta(r)H0(0)(ClOOCl-->ClO+ClO) = 66.4 +/- 3.0 kJ mol(-1). k-1,0 started to fall off from the pressure proportional low pressure behavior at p approximately 30 mbar; however, reliable extrapolation to the high pressure limit was not possible. The decomposition rate constants of ClOOCl were directly measured for the first time, and they are higher, depending on temperature and pressure, by factors between 1.5 and 4.2 as compared to experimental data on k-1 by Nickolaisen et al. [J. Phys. Chem. 1994, 98, 155] which were derived from the approach of ClO to thermal equilibrium with its dimer ClOOCl. Combination of the present dissociation rate constants with recommended temperature and pressure dependent data on the reverse reaction (k1) demonstrate inconsistencies between the dissociation and recombination rate constants. Summarizing laboratory data on k1 and k-1 above 250 K and field measurements on the ClO + ClO <= => ClOOCl equilibrium in the nighttime polar stratosphere close to 200 K, the expression Kc = k1/k-1 = 3.0 x 10(-27) exp(8433 K/T) cm3 molecule(-1) is derived for the temperature range 200-300 K.     

Tertiary arsine-stabilised arsenium salts: syntheses and comparisons with phosphine analogues

The first tertiary arsine-stabilised arsenium salts, [(L)AsMePh]OTf (L = Ph3As, Me2PhAs, [2-(MeOCH2)C6H4]Ph2As, [2-(MeOCH2)C6H4]Me2As), have been prepared by chloride abstraction from chloromethylphenylarsine with trimethylsilyl triflate in the presence of the arsine. The complexes have been characterised by crystallography and 1H NMR spectroscopy. The chiral cations in the complexes have structures based on the trigonal pyramid in which the arsine is coordinated orthogonally to the prochiral, six-electron MePhAs+ ion that forms the base of the pyramid. The NMR data for the complexes in dichloromethane-d2 are consistent with rapid exchange of the arsine on the arsenium ion, even at 183 K. The corresponding phosphine-stabilised complexes are considerably more stable than their arsine counterparts in dichloromethane-d2 with the free energy of activation DeltaG = ca. 60 kJ mol(-1) being calculated for phosphine exchange in [(Me2PhP)AsMePh]OTf at 281 K; for [(Me2[2-(MeOCH2)C6H4]P)AsMePh]OTf in the same solvent, DeltaG = ca. 70 kJ mol(-1) at 323 K.     

The impact of tripodal chelates on water exchange kinetics and mechanisms: a variable temperature and pressure 17O NMR study to clarify the structure-reactivity relationship in [Fe(II)(L)(H2O2](-) complexes

The effect of temperature and pressure on the water exchange reaction of [Fe(II)(NTA)(H2O)2](-) and [Fe(II)(BADA)(H2O)2](-) (NTA = nitrilotriacetate; BADA = beta-alanindiacetate) was studied by 17O NMR spectroscopy. The [Fe(II)(NTA)(H2O)2](-) complex showed a water exchange rate constant, k(ex), of (3.1 +/- 0.4) x 10(6) s(-1) at 298.2 K and ambient pressure. The activation parameters DeltaH( not equal), DeltaS( not equal) and DeltaV( not equal) for the observed reaction are 43.4 +/- 2.6 kJ mol(-1), + 25 +/- 9 J K(-1) mol(-1) and + 13.2 +/- 0.6 cm(3) mol(-1), respectively. For [Fe(II)(BADA)(H2O)2](-), the water exchange reaction is faster than for the [Fe(II)(NTA)(H2O)2](-) complex with k(ex) = (7.4 +/- 0.4) x 10(6) s(-1) at 298.2 K and ambient pressure. The activation parameters DeltaH( not equal), DeltaS( not equal) and DeltaV( not equal) for the water exchange reaction are 40.3 +/- 2.5 kJ mol(-1), + 22 +/- 9 J K(-1) mol(-1) and + 13.3 +/- 0.8 cm(3) mol(-1), respectively. The effect of pressure on the exchange rate constant is large and very similar for both systems, and the numerical values for DeltaV( not equal) suggest in both cases a limiting dissociative (D) mechanism for the water exchange process.     

Cyclodextrin complexation of a stilbene and the self-assembly of a simple molecular device

(E)-4-tert-Butyl-4'-oxystilbene, 1(-), is thermally stable as the (E)-1(-) isomer but may be photoisomerized to the (Z)-1(-) isomer as shown by UV-vis and (1)H NMR studies in aqueous solution. When (E)-1(-) is complexed by alphaCD two inclusion isomers (includomers) form in which alphaCD assumes either of the two possible orientations about the axis of (E)-1(-) in alphaCD.(E)-1(-) for which (1)H NMR studies yield the parameters: k(1)(298 K)= 12.3 +/- 0.6 s(-1), DeltaH(1)(++)= 94.3 +/- 4.7 kJ mol(-1), DeltaS1(++)= 92.0 +/- 5.0 J K(-1) mol(-1), and k(2)(298 K)= 10.7 +/- 0.5 s(-1), DeltaH(2)(++)= 93.1 +/- 4.7 kJ mol(-1), DeltaS2(++)= 87.3 +/- 5.0 J K(-1) mol(-1) for the minor and major includomers, respectively. The betaCD.(E)-1(-) complex either forms a single includomer or its includomers interchange at the fast exchange limit of the (1)H NMR timescale. Complexation of 1(-) by N-(6(A)-deoxy- alpha-cyclodextrin-6(A)-yl)-N'-(6(A)-deoxy- beta-cyclodextrin-6(A)-yl)urea, results in the binary complexes 2.(E)-1(-) in which both CD component annuli are occupied by (E)-1(-) and which exists exclusively in darkness and 2.(Z)-1(-) in which only one CD component is occupied by (Z)-1(-) and exists exclusively in daylight at lambda > or = 300 nm. Irradiation of solutions of the binary complexes at 300 and 355 nm results in photostationary states dominated by 2.(E)-1(-) and 2.(Z)-1(-), respectively. In the presence of 4-methylbenzoate, 4(-), 2.(Z)-1(-) forms the ternary complex 2.(Z)-1(-).4(-) where 4(-) occupies the second CD annulus. Interconversion occurs between 2.(Z)-1(-).4(-) and 2.(E)-1(-)+4(-) under the same conditions as for the binary complexes alone. Similar interactions occur in the presence of 4-methylphenolate and 4-methylphenylsulfonate. The two isomers of each of these systems represent different states of a molecular device, as do the analogous binary complexes of N,N-bis(6(A)-deoxy- beta-cyclodextrin-6(A)-yl)urea, 3, [3.(E)-1(-) and 3.(Z)-1(-), where the latter also forms a ternary complex with 4(-).     

Mechanism for Solvent Exchange on trans-[Os(en)(2)(eta(2)-H(2))S](2+)

Solvent exchange on trans-[Os(en)(2)(eta(2)-H(2))S](2+) (S = H(2)O, CH(3)CN) has been studied in neat solvent as a function of temperature and pressure by (17)O NMR line-broadening and isotopic labeling experiments (S = H(2)O) and by (1)H NMR isotopic labeling experiments (S = CH(3)CN). Rate constants and activation parameters are as follows for S = H(2)O and CH(3)CN, respectively: k(ex)(298) = 1.59 +/- 0.04 and (2.74 +/- 0.03) x 10(-)(4) s(-)(1); DeltaH() = 72.4 +/- 0.5 and 98.0 +/- 1.4 kJ mol(-)(1); DeltaS() = +1.7 +/- 1.8 and +15.6 +/- 4.9 J mol(-)(1) K(-)(1); DeltaV() = -1.5 +/- 1.0 and -0.5 +/- 1.0 cm(3) mol(-)(1). The present investigation of solvent exchange when compared with a previous study on substitution reactions on the same complexes leads to the conclusion that substitution reactions on these compounds undergo an interchange dissociative, I(d), or dissociative, D, reaction mechanism, where solvent dissociation is the rate-limiting step.     

Stoichiometries and thermodynamic stabilities for aqueous sulfate complexes of U(VI)

The formation constants of UO2SO4 (aq), UO2(SO4)2(2-), and UO2(SO4)3(4-) were measured in aqueous solutions from 10 to 75 degrees C by time-resolved laser-induced fluorescence spectroscopy (TRLFS). A constant enthalpy of reaction approach was satisfactorily used to fit the thermodynamic parameters of stepwise complex formation reactions in a 0.1 M Na(+) ionic medium: log 10 K 1(25 degrees C) = 2.45 +/- 0.05, Delta r H1 = 29.1 +/- 4.0 kJ x mol(-1), log10 K2(25 degrees C) = 1.03 +/- 0.04, and Delta r H2 = 16.6 +/- 4.5 kJ x mol(-1). While the enthalpy of the UO2(SO4)2(2-) formation reaction is in good agreement with calorimetric data, that for UO2SO4 (aq) is higher than other values by a few kilojoules per mole. Incomplete knowledge of the speciation may have led to an underestimation of Delta r H1 in previous calorimetric studies. In fact, one of the published calorimetric determinations of Delta r H1 is here supported by the TRLFS results only when reinterpreted with a more correct equilibrium constant value, which shifts the fitted Delta r H1 value up by 9 kJ x mol(-1). UO2(SO 4) 3 (4-) was evidenced in a 3 M Na (+) ionic medium: log10 K3(25 degrees C) = 0.76 +/- 0.20 and Delta r H3 = 11 +/- 8 kJ x mol(-1) were obtained. The fluorescence features of the sulfate complexes were observed to depend on the ionic conditions. Changes in the coordination mode (mono- and bidentate) of the sulfate ligands may explain these observations, in line with recent structural data.     

The oxidative degradation of dibenzoazepine derivatives by cerium(IV) complexes in acidic sulfate media

The kinetics of the oxidation of imipramine and desipramine using cerium(IV) complexes were studied in the presence of a large excess of azepine derivative (TCA) in acidic sulfate media using UV-Vis spectroscopy. The reaction proceeds via dibenzoazepine radical formation, identified by EPR measurements. The kinetics of the first degradation step were studied independently of the further slower degradation reactions. Linear dependences, with zero intercept, of the pseudo-first-order rate constants (k(obs)) on [TCA] were established for both dibenzoazepine radical formation processes. Rates of reactions decreased with increasing concentration of the H(+) ion indicating that cerium(IV) as well as both reductants exist in an equilibrium with their protolytic forms. The activation parameters for the degradation of dibenzoazepine derivatives in the first oxidation stage were as follows: ΔH(≠) = 39 ± 2 kJ mol(-1), ΔS(≠) = -28 ± 8 J K(-1) mol(-1) for imipramine and ΔH(≠) = 39 ± 2 kJ mol(-1), ΔS(≠) = -28 ± 6 J K(-1) mol(-1) for desipramine, respectively. Imipramine and desipramine radicals dimerized leading to an intermediate radical dimer, which decayed in a first-order consecutive decay process. These two further reactions proceed with rates which are characterized by non-linear dependences of the pseudo-first-order rate constants (k(obs)) on [TCA]. The degradation reaction of the intermediate radical dimer leads to an uncharged dimer as a final product. Mechanistic consequences of all the results are discussed.     

Triggering water exchange mechanisms via chelate architecture. Shielding of transition metal centers by aminopolycarboxylate spectator ligands

Paramagnetic effects on the relaxation rate and shift difference of the (17)O nucleus of bulk water enable the study of water exchange mechanisms on transition metal complexes by variable temperature and variable pressure NMR. The water exchange kinetics of [Mn(II)(edta)(H2O)](2-) (CN 7, hexacoordinated edta) was reinvestigated and complemented by variable pressure NMR data. The results revealed a rapid water exchange reaction for the [Mn(II)(edta)(H2O)](2-) complex with a rate constant of k(ex) = (4.1 +/- 0.4) x 10(8) s(-1) at 298.2 K and ambient pressure. The activation parameters DeltaH(double dagger), DeltaS(double dagger), and DeltaV(double dagger) are 36.6 +/- 0.8 kJ mol(-1), +43 +/- 3 J K(-1) mol(-1), and +3.4 +/- 0.2 cm(3) mol(-1), which are in line with a dissociatively activated interchange (I(d)) mechanism. To analyze the structural influence of the chelate, the investigation was complemented by studies on complexes of the edta-related tmdta (trimethylenediaminetetraacetate) chelate. The kinetic parameters for [Fe(II)(tmdta)(H2O)](2-) are k(ex) = (5.5 +/- 0.5) x 10(6) s(-1) at 298.2 K, DeltaH(double dagger) = 43 +/- 3 kJ mol(-1), DeltaS(double dagger) = +30 +/- 13 J K(-1) mol(-1), and DeltaV(double dagger) = +15.7 +/- 1.5 cm(3) mol(-1), and those for [Mn(II)(tmdta)(H2O)](2-) are k(ex) = (1.3 +/- 0.1) x 10(8) s(-1) at 298.2 K, DeltaH(double dagger) = 37.2 +/- 0.8 kJ mol(-1), DeltaS(double dagger) = +35 +/- 3 J K(-1) mol(-1), and DeltaV(double dagger) = +8.7 +/- 0.6 cm(3) mol(-1). The water containing species, [Fe(III)(tmdta)(H2O)](-) with a fraction of 0.2, is in equilibrium with the water-free hexa-coordinate form, [Fe(III)(tmdta)](-). The kinetic parameters for [Fe(III)(tmdta)(H2O)](-) are k(ex) = (1.9 +/- 0.8) x 10(7) s(-1) at 298.2 K, DeltaH(double dagger) = 42 +/- 3 kJ mol(-1), DeltaS(double dagger) = +36 +/- 10 J K(-1) mol(-1), and DeltaV(double dagger) = +7.2 +/- 2.7 cm(3) mol(-1). The data for the mentioned tmdta complexes indicate a dissociatively activated exchange mechanism in all cases with a clear relationship between the sterical hindrance that arises from the ligand architecture and mechanistic details of the exchange process for seven-coordinate complexes. The unexpected kinetic and mechanistic behavior of [Ni(II)(edta')(H2O)](2-) and [Ni(II)(tmdta')(H2O)](2-) is accounted for in terms of the different coordination number due to the strong preference for an octahedral coordination environment and thus a coordination equilibrium between the water-free, hexadentate [M(L)](n+) and the aqua-pentadentate forms [M(L')(H2O)](n+) of the Ni(II)-edta complex, which was studied in detail by variable temperature and pressure UV-vis experiments. For [Ni(II)(edta')(H2O)](2-) (CN 6, pentacoordinated edta) a water substitution rate constant of (2.6 +/- 0.2) x 10(5) s(-1) at 298.2 K and ambient pressure was measured, and the activation parameters DeltaH(double dagger), DeltaS(double dagger), and DeltaV(double dagger) were found to be 34 +/- 1 kJ mol(-1), -27 +/- 2 J K(-1) mol(-1), and +1.8 +/- 0.1 cm(3) mol(-1), respectively. For [Ni(II)(tmdta')(H2O)](2-), we found k = (6.4 +/- 1.4) x 10(5) s(-1) at 298.2 K, DeltaH(double dagger) = 22 +/- 4 kJ mol(-1), and DeltaS(double dagger) = -59 +/- 5 J K(-1) mol(-1). The process is referred to as a water substitution instead of a water exchange reaction, since these observations refer to the intramolecular displacement of coordinated water by the carboxylate moiety in a ring-closure reaction.     

Direct measurements of the rate constants of the reactions NCN + NO and NCN + NO2 behind shock waves

The high-temperature rate constants of the reactions NCN + NO and NCN + NO(2) have been directly measured behind shock waves under pseudo-first-order conditions. NCN has been generated by the pyrolysis of cyanogen azide (NCN(3)) and quantitatively detected by sensitive difference amplification laser absorption spectroscopy at a wavelength of 329.1302 nm. The NCN(3) decomposition initially yields electronically excited (1)NCN radicals, which are subsequently transformed to the triplet ground state by collision-induced intersystem crossing (CIISC). CIISC efficiencies were found to increase in the order of Ar < NO(2) < NO as the collision gases. The rate constants of the NCN + NO/NO(2) reactions can be expressed as k(NCN+NO)/(cm(3) mol(-1)s(-1)) = 1.9 × 10(12) exp[-26.3 (kJ/mol)/RT] (±7%,ΔE(a) = ± 1.6 kJ/mol, 764 K < T < 1944 K) and k(NCN+NO(2))/(cm(3) mol(-1)s(-1)) = 4.7 × 10(12) exp[-38.0(kJ/mol)/RT] (±19%,ΔE(a) = ± 3.8 kJ/mol, 704 K < T < 1659 K). In striking contrast to reported low-temperature measurements, which are dominated by recombination processes, both reaction rates show a positive temperature dependence and are independent of the total density (1.7 × 10(-6) mol/cm(3) < ρ < 7.6 × 10(-6) mol/cm(3)). For both reactions, the minima of the total rate constants occur at temperatures below 700 K, showing that, at combustion-relevant temperatures, the overall reactions are dominated by direct or indirect abstraction pathways according to NCN + NO → CN + N(2)O and NCN + NO(2) → NCNO + NO.     

Physicochemical study of spiropyran-terthiophene derivatives: photochemistry and thermodynamics

The photochemistry and thermodynamics of two terthiophene (TTh) derivatives bearing benzospiropyran (BSP) moieties, 1-(3,3″-dimethylindoline-6'-nitrobenzospiropyranyl)-2-ethyl 4,4″-didecyloxy-2,2':5',2″-terthiophene-3'-acetate (BSP-2) and 1-(3,3″-dimethylindoline-6'-nitrobenzospiropyranyl)-2-ethyl 4,4″-didecyloxy-2,2':5',2″-terthiophene-3'-carboxylate (BSP-3), differing only by a single methylene spacer unit, have been studied. The kinetics of photogeneration of the equivalent merocyanine (MC) isomers (MC-2 and MC-3, respectively), the isomerisation properties of MC-2 and MC-3, and the thermodynamic parameters have been studied in acetonitrile, and compared to the parent, non-TTh-functionalised, benzospiropyran derivative, BSP-1. Despite the close structural similarity of BSP-2 and BSP-3, their physicochemical properties were found to differ significantly; examples include activation energies (E(a(MC-2)) = 75.05 kJ mol(-1), E(a(MC-3)) = 100.39 kJ mol(-1)) and entropies of activation (ΔS = 43.38 J K(-1) mol(-1), ΔS = 37.78 J K(-1) mol(-1)) for the thermal relaxation from MC to BSP, with the MC-3 value much closer to the unmodified MC-1 value (46.48 J K(-1) mol(-1)) for this latter quantity. The thermal relaxation kinetics and solvatochromic behaviour of the derivatives in a range of solvents of differing polarity (ethanol, dichloromethane, acetone, toluene and diethyl ether) are also presented. Differences in the estimated values of these thermodynamic and kinetic parameters are discussed with reference to the molecular structure of the derivatives.     

Kinetics of Water Exchange on the Dihydroxo-Bridged Rhodium(III) Hydrolytic Dimer

()()Conventional (18)O isotopic labeling techniques have been used to measure the water exchange rates on the Rh(III) hydrolytic dimer [(H(2)O)(4)Rh(&mgr;-OH)(2)Rh(H(2)O)(4)](4+) at I = 1.0 M for 0.08 < [H(+)] < 0.8 M and temperatures between 308.1 and 323.1 K. Two distinct pathways of water exchange into the bulk solvent were observed (k(fast) and k(slow)) which are proposed to correspond to exchange of coordinated water at positions cis and trans to bridging hydroxide groups. This proposal is supported by (17)O NMR measurements which clearly showed that the two types of water ligands exchange at different rates and that the rates of exchange matched those from the (18)O labeling data. No evidence was found for the exchange of label in the bridging OH groups in either experiment. This contrasts with findings for the Cr(III) dimer. The dependence of both k(fast) and k(slow) on [H(+)] satisfied the expression k(obs) = (k(O)[H(+)](tot) +k(OH)K(a1))/([H(+)](tot) + K(a1)) which allows for the involvement of fully protonated and monodeprotonated Rh(III) dimer. The following rates and activation parameters were determined at 298 K. (i) For fully protonated dimer: k(fast) = 1.26 x 10(-)(6) s(-)(1) (DeltaH() = 119 +/- 4 kJ mol(-)(1) and DeltaS() = 41 +/- 12 J K(-)(1) mol(-)(1)) and k(slow) = 4.86 x 10(-)(7) s(-)(1) (DeltaH() = 64 +/- 9 kJ mol(-)(1) and DeltaS() = -150 +/- 30 J K(-)(1) mol(-)(1)). (ii) For monodeprotonated dimer: k(fast) = 3.44 x 10(-)(6) s(-)(1) (DeltaH() = 146 +/- 4 kJ mol(-)(1) and DeltaS() = 140 +/- 11 J K(-)(1) mol(-)(1)) and k(slow) = 2.68 x 10(-)(6) s(-)(1) (DeltaH() = 102 +/- 3 kJ mol(-)(1) and DeltaS() = -9 +/- 11 J K(-)(1) mol(-)(1)). Deprotonation of the Rh(III) dimer was found to labilize the primary coordination sphere of the metal ions and thus increase the rate of water exchange at positions cis and trans to bridging hydroxides but not to the same extent as for the Cr(III) dimer. Activation parameters and mechanisms for ligand substitution processes on the Rh(III) dimer are discussed and compared to those for other trivalent metal ions and in particular the Cr(III) dimer.     

Role of alkali metal cation size in the energy and rate of electron transfer to solvent-separated 1:1 [(M+)(acceptor)] (M+ = Li+, Na+, K+) ion pairs.

The effect of cation size on the rate and energy of electron transfer to [(M(+))(acceptor)] ion pairs is addressed by assigning key physicochemical properties (reactivity, relative energy, structure, and size) to an isoelectronic series of well-defined M(+)-acceptor pairs, M(+) = Li(+), Na(+), K(+). A 1e(-) acceptor anion, alpha-SiV(V)W(11)O(40)(5-) (1, a polyoxometalate of the Keggin structural class), was used in the 2e(-) oxidation of an organic electron donor, 3,3',5,5'-tetra-tert-butylbiphenyl-4,4'-diol (BPH(2)), to 3,3',5,5'-tetra-tert-butyldiphenoquinone (DPQ) in acetate-buffered 2:3 (v/v) H(2)O/t-BuOH at 60 degrees C (2 equiv of 1 are reduced by 1e(-) each to 1(red), alpha-SiV(IV)W(11)O(40)(6-)). Before an attempt was made to address the role of cation size, the mechanism and conditions necessary for kinetically well behaved electron transfer from BPH(2) to 1 were rigorously established by using GC-MS, (1)H, (7)Li, and (51)V NMR, and UV-vis spectroscopy. At constant [Li(+)] and [H(+)], the reaction rate is first order in [BPH(2)] and in [1] and zeroth order in [1(red)] and in [acetate] (base) and is independent of ionic strength, mu. The dependence of the reaction rate on [H(+)] is a function of the constant, K(a)1, for acid dissociation of BPH(2) to BPH(-) and H(+). Temperature dependence data provided activation parameters of DeltaH = 8.5 +/- 1.4 kcal mol(-1) and DeltaS = -39 +/- 5 cal mol(-1) K(-1). No evidence of preassociation between BPH(2) and 1 was observed by combined (1)H and (51)V NMR studies, while pH (pD)-dependent deuterium kinetic isotope data indicated that the O-H bond in BPH(2) remains intact during rate-limiting electron transfer from BPH(2) and 1. The formation of 1:1 ion pairs [(M(+))(SiVW(11)O(40)(5-))](4-) (M(+)1, M(+) = Li(+), Na(+), K(+)) was demonstrated, and the thermodynamic constants, K(M)(1), and rate constants, k(M)(1), associated with the formation and reactivity of each M(+)1 ion pair with BPH(2) were calculated by simultaneous nonlinear fitting of kinetic data (obtained by using all three cations) to an equation describing the rectangular hyperbolic functional dependence of k(obs) values on [M(+)]. Constants, K(M)(1)red, associated with the formation of 1:1 ion pairs between M(+) and 1(red) were obtained by using K(M)(1) values (from k(obs) data) to simultaneously fit reduction potential (E(1/2)) values (from cyclic voltammetry) of solutions of 1 containing varying concentrations of all three cations to a Nernstian equation describing the dependence of E(1/2) values on the ratio of thermodynamic constants K(M)(1) and K(M)(1)red. Formation constants, K(M)(1), and K(M)(1)red, and rate constants, k(M)(1), all increase with the size of M(+) in the order K(Li)(1) = 21 < K(Na)(1) = 54 < K(K)(1) = 65 M(-1), K(Li)(1)red = 130 < K(Na)(1)red = 570 < K(K)(1)red = 2000 M(-1), and k(Li)(1) = 0.065 < k(Na)(1) = 0.137 < k(K)(1) = 0.225 M(-1) s(-1). Changes in the chemical shifts of (7)Li NMR signals as functions of [Li(5)1] and [Li(6)1(red)] were used to establish that the complexes M(+)1 and M(+)1(red) exist as solvent-separated ion pairs. Finally, correlation between cation size and the rate and energy of electron transfer was established by consideration of K(M)(1), k(M)(1), and K(M)(1)red values along with the relative sizes of the three M(+)1 pairs (effective hydrodynamic radii, r(eff), obtained by single-potential step chronoamperometry). As M(+) increases in size, association constants, K(M)(1), become larger as smaller, more intimate solvent-separated ion pairs, M(+)1, possessing larger electron affinities (q/r), and associated with larger k(M)(1)() values, are formed. Moreover, as M(+)1 pairs are reduced to M(+)1(red) during electron transfer in the activated complexes, [BPH(2), M(+)1], contributions of ion pairing energy (proportional to -RT ln(K(M)(1)red/K(M)(1)) to the standard free energy change associated with electron transfer, DeltaG degrees (et), increase with cation size: -RT ln(K(M)(1)red/K(M)(1)) (in kcal mol(-1)) = -1.2 for Li(+), -1.5 for Na(+), and -2.3 for K(+).     

NMR investigation of methyl-2,4-dimethoxysalicylate: effect of solvent and temperature

(1)H NMR and (13)C NMR of methyl-2,4-dimethoxysalicylate 2 was measured in chloroform-d at the temperature range of 220-330 K, in dimethyl sulfoxide-d(6) at the temperature range of 300-400 K and in a polar protic solvent (CD(3)OD) at 300 K. The structure of 2 in liquid phase (solvent) is compared with those in solid phase (X-ray) and in the gas phase (quantum mechanical calculations). The relationship between molecular geometry, (1)H NMR chemical shift and W coupling of involved protons has a complex nature, but hydrogen bonds [C=O...H-O and C=O...H-CH(2)O] strength is the principle factor.