异构体化合物的电化学传感器检测进展

综述了电化学传感器在分离和检测异构体化合物方面的研究进展.在位置异构体方面,介绍了碳纳米管修饰电极、碳纳米管复合修饰电极、表面活性剂增敏下的玻碳电极对酚类异构体的检测研究(包括萘酚、硝基酚、二硝基酚、苯二酚);在立体异构体方面,重点介绍了碳糊修饰电极、酶修饰电极、手性膜电极、免疫传感器的制备及其在氨基酸对映体检测中的应用,并展望了该研究领域的发展前景.     

电还原氧化石墨烯/多壁碳纳米管复合修饰电极检测萘普生

将氧化石墨烯/多壁碳纳米管复合材料滴涂于玻碳电极表面,并运用恒电位还原法对氧化石墨烯进行直接电化学还原,制备了电还原氧化石墨烯/多壁碳纳米管复合修饰电极(rGO/MWCNTs-GCE),利用X-射线衍射(XRD)、扫描电镜(SEM)、拉曼光谱等对其进行初步表征.采用循环伏安法(CV)和差分脉冲伏安法(DPV)研究了萘普...     

对乙酰氨基酚在多壁碳纳米管修饰电极上的电化学行为

制备了多壁碳纳米管修饰玻碳电极,研究了对乙酰氨基酚在多壁碳纳米管修饰电极上的循环伏安行为,并建立了测定对乙酰氨基酚含量的电化学分析方法。在pH为6.89的磷酸盐缓冲液中,多壁碳纳米管修饰电极对对乙酰氨基酚有明显的电催化作用,其氧化峰电流与对乙酰氨基酚浓度在1.0×10-6～1.0×10-4mol·L-1范围内呈良好的线性关系,检测限为2.0×10-7mol·L-1。     

聚L-半胱氨酸/多壁碳纳米管复合修饰电极同时测定邻苯二酚和对苯二酚

将羧基化多壁碳纳米管分散在L-半胱氨酸溶液中并滴涂在玻碳电极表面.将上述电极在pH 6.9的B-R缓冲溶液中,于-1.0～2.5 V的电位范围内进行电聚合,制备了聚L-半胱氨酸/多壁碳纳米管复合修饰电极(Pol-L-Cys/MWCNTs/GCE).研究发现,邻苯二酚和对苯二酚在聚L-半胱氨酸/多壁碳纳米管复合修饰电极上分别出现了一对氧化还原峰,且两者的氧化峰电位差达101 mV,提出了用微分脉冲伏安法同时测定邻苯二酚和对苯二酚的方法.氧化峰电流与邻苯二酚和对苯二酚的浓度在1.0×10-5～1.0×10-3mol·L-1呈线性关系,检出限(3S/N)均达1.0×10-5mol·L-1.修饰电极用于模拟样品中邻苯二酚和对苯二酚的测定,回收率在82.0%～107.0%之间.     

对硝基苯酚在多壁碳纳米管修饰玻碳电极上的电化学行为及分析测定

水中对硝基苯酚主要来源于化工、制药行业,它有致癌作用。人们已对它的测定方法进行了大量的研究,最早采用的测定方法是分光光度法,其检测限偏高;色谱法测定对硝基苯酚,操作繁琐,仪器昂贵,分析成本高。后来又发展了一种操作更方便的直接用于测定的电化学方法。本文旨在利用碳纳米管对对硝基苯酚的吸附性能,研究对硝基苯酚在多壁碳纳米管修饰电极上的电化学行为。     

纳米银/聚多巴胺修饰玻碳电极的制备及电化学行为

利用电聚合法和脉冲沉积技术制备了纳米银/聚多巴胺修饰的玻碳电极. 通过循环伏安法和示差脉冲伏安法研究了该修饰电极上对硝基苯酚的电化学行为; 讨论了扫描速度和支持电解质等条件对对硝基苯酚在修饰电极上催化还原的影响. 结果表明, 对硝基苯酚的示差脉冲峰电流在4×10^-5～3×10^-4 mol/L范围内呈良好的线性关系.     

六氰合铁酸铜钴-多壁碳纳米管修饰电极研究

采用电沉积方法制备六氰合铁酸铜钴-多壁碳纳米管复合修饰电极(CuCoHCF-MWCNTs/GCE).研究碳纳米管用量、电解液组成对该修饰电极性能的影响.结果表明,与单一的六氰合铁酸铜钴薄膜修饰电极相比,六氰合铁酸铜钴-多壁碳纳米管复合修饰电极具有更优良的电化学特性,以其催化氧化过氧化氢,峰电流与过氧化氢浓度在3.16×10-5～2.92×10-3mol·L-1范围内呈良好的线性关系,线性回归方程为ip(μA)=0.5529+1.1299C(×10-4mol·L-1),相关系数r=0.9966,检出限为1.75×10-5mol·L-1.     

基于固定化电子媒介体的漆酶电极的制备与应用

采用一种新方法引入媒介体,即将媒介体2,2-连氮-双(3-乙基苯并噻唑啉-6-磺酸)(ABTS)固定在多壁碳纳米管(MWCNTs)上,将壳聚糖与漆酶共同修饰在玻碳电极表面,制备了漆酶电极。实验发现,ABTS能够被牢固地吸附在多壁碳纳米管上,且吸附了ABTS的多壁碳纳米管在水中的分散性能大为改善。由于ABTS的存在,该漆酶电极能够更加有效地催化氧气还原,使氧气的还原电位从-0.1 V升至0.6 V。研究了修饰在多壁碳纳米管上的ABTS的电化学行为,并讨论了碳纳米管修饰量、pH值及温度对漆酶电极催化性能的影响。该方法简单,制备的漆酶电极对氧气还原的催化效率高,有望应用于植入型生物燃料电池。     

聚2,6-吡啶二甲酸/多壁碳纳米管修饰电极的电催化性能

研制了一种聚2,6-吡啶二甲酸/多壁碳纳米管(PPDA/MCNT)复合修饰电极。该电极以中性KC l溶液为底液,在玻碳电极上以多壁碳纳米管(MCNT)作掺杂剂,通过电聚合2,6-吡啶二甲酸(PDA)而制得。该修饰电极对多巴胺(DA)有很强的电催化氧化作用。在磷酸盐缓冲液(pH 7.2)中,与碳纳米管修饰电极相比,DA的氧化峰电位降低约30 mV。利用线性扫描伏安法(LSV)测定,DA在9.0×10-8~8.0×10-6mol/L浓度范围内,其峰高与浓度呈线性关系;检出限为5.0×10-8mol/L,并可避免AA、UA对测定产生干扰。     

一维纳米Co_3O_4,Ag/Co_3O_4及CuO/Co_3O_4的合成与电催化性能(英文)

采用水热合成法制备了Co3O4及复合Ag/Co3O4、CuO/Co3O4一维纳米产品。用XRD,FE-SEM和TEM手段对产品进行了表征。采用循环伏安法研究了合成产品修饰的玻碳电极在碱性溶液中对对硝基苯酚的电催化还原性能。与裸玻碳电极相比,1mmol·L-1的对硝基苯酚在用Co3O4、特别是CuO/Co3O4修饰的玻碳电极上还原的峰电流明显增大,用Ag/Co3O4(Ag/Co原子比分别为1∶5和2∶5)修饰的玻碳电极催化还原对硝基苯酚时,尽管还原峰电流增大不是太大,但其峰电位明显降低(分别降低0.265和0.371V)。     

聚(3-氨基-5-巯基-1,2,4-三唑)/多壁碳纳米管修饰的玻碳电极同时检测尿酸、黄嘌呤与次黄嘌呤

采用滴涂法得到多壁碳纳米管(MWCNTs)修饰的玻碳电极(GCE),通过电沉积方法将3-氨基-5-巯基-1,2,4-三唑(TA)沉积在MWCNTs/GCE表面,制备了聚(3-氨基-5-巯基-1,2,4-三唑)/多壁碳纳米管修饰电极(p TA/MWCNTs/GCE)。采用循环伏安法(CV)和示差脉冲伏安法(DPV),研究了尿酸(UA)、黄嘌呤(XA)和次黄嘌呤(HX)在该修饰电极上的电化学行为。结果表明,该修饰电极对UA、XA和HX均有较好的电催化活性作用,能实现对3种物质的同时测定。UA、XA和HX在该修饰电极上的线性范围分别为9.0~739.0、2.0~259.0、1.0~353.0μmol/L;检出限分别为0.67、0.17、0.33μmol/L。该修饰电极已成功用于尿液和血清实际样品中UA、XA和HX的同时测定,回收率为98.8%~105.5%。     

基于金纳米粒子/聚阿魏酸/多壁碳纳米管修饰电极的DNA计时库仑法生物传感器的制备

构建了基于金纳米粒子/聚阿魏酸/多壁碳纳米管(AuNPs/PFA/MWCNTs)修饰电极的DNA计时库仑法生物传感器.利用循环伏安技术在多壁碳管修饰的玻碳电极表面上聚合一层阿魏酸,在恒电位条件下,在阿魏酸表面沉积金纳米粒子,巯基DNA作为探针通过金硫键固定在金纳米粒子表面.电化学交流阻抗技术(EIS)与扫描电镜(SEM...     

Electroanalytical method for determination of shikonin based on the enhancement effect of cyclodextrin functionalized carbon nanotubes

A simple and sensitive electroanalytical method for determination of shikonin,a widely used antitumoral agent,using β-cyclodextrin-functionalized multiwalled carbon nanotubes composite modified glassy carbon electrodes(MWCNTs/β-CD/GCE) was presented.CDs are water-soluble and environmentally friendly and can improve the dispersibility of MWCNTs/β-CD functional materials,which was confirmed by SEM.The electrochemical behaviors of shikonin on different electrodes were investigated by cyclic voltammetry(CV) and differential pulse voltammograms(DPVs).The results demonstrated that the redox peak currents of shikonin obtained at MWCNTs/β-CD/GCE were much higher than those at theβ-CD/GCE and MWCNTs/GCE,which can be attributed to the combination of the excellent electrocatalytic properties of MWCNTs and the molecular recognition ability of β-CD.At MWCNTs/β-CD/GCE,the response current exhibits a linear range from 5.0 nmol/L to 10.0 μmol/L with a detection limit of 1.0 nmol/L(S/N = 3).As a practical application,the proposed method was applied to quantitatively determine shikoninin urine samples with satisfying results.     

Electrochemical behavior and voltammetric determination of norfloxacin at glassy carbon electrode modified with multi walled carbon nanotubes/Nafion

A simple and rapid electrochemical method is developed for the determination of trace-level norfloxacin, based on the excellent properties of multi-walled carbon nanotubes (MWCNTs). The MWCNTs/Nafion film-coated glassy carbon electrode (GCE) is constructed and the electrochemical behavior of norfloxacin at the electrode is investigated in detail. The results indicate that MWCNTs modified glassy carbon electrode exhibited efficiently electrocatalytic oxidation for norfloxacin (NFX) with relatively high sensitivity, stability and life time. Under conditions of cyclic voltammetry, the current for oxidation of selected analyte is enhanced significantly in comparison to the bare GCE. The electrocatalytic behavior is further exploited as a sensitive detection scheme for the analyte determinations by linear sweep voltammetry (LSV). Under optimized condition in voltammetric method the concentration calibration range and detection limit (S/N=3) are 0.1-100 micromol/L and 5 x 10(-8)mol/L for NFX. The proposed method was successfully applied to NFX determination in tablets. The analytical performance of this sensor has been evaluated for detection of the analyte in urine as a real sample.     

基于Sol-gel膜和多壁碳纳米管/铂纳米颗粒增效的电流型L-乳酸生物传感器

构建了基于多壁碳纳米管(Multi-walled carbon nanotubes,MWCNTs)和铂纳米颗粒(Pt-nano)的电流型L-乳酸生物传感器。将Sol-gel膜覆盖在L-乳酸氧化酶(L-lactate oxidase,LOD)和MWCNTs/Pt-nano修饰的电极表面。实验结果表明:传感器的最佳工作条件为:检测电压0.5V;缓冲液pH6.4;检测温度25℃。此传感器的响应时间为5s,灵敏度是6.36μA/(mmol/L)。连续检测4星期其活性仍保持90%,线性范围为0.2～2.0mmol/L,且抗干扰能力强。在实际血样的检测中,此传感器与传统的分光光度法具有很好的一致性。     

壳聚糖/多壁碳纳米管复合膜电化学手性识别色氨酸对映异构体

采用滴涂方式将羧酸化多壁碳纳米管(f-MWCNTs)修饰于玻碳电极(GCE)表面成膜,然后恒电位法在上述修饰电极表面电沉积壳聚糖(CS)膜,形成CS和f-MWCNTs复合膜修饰电极(CS/f-MWCNTs/GCE),并用于色氨酸(Trp)对映异构体的手性识别。采用扫描电子显微镜(SEM)表征了修饰电极表面形貌的差异,电化学阻抗(EIS)和循环伏安法(CV)研究修饰电极的电化学行为差异。差分脉冲伏安法(DPV)用于区别色氨酸(Trp)对映异构体,分离系数可达2.38。研究发现该修饰电极对L-Trp的DPV响应信号强于D-Trp,检测的线性范围为8.0×10~(-6)~4.0×10~(-3)mol/L,检出限(S/N=3)为5.0×10~(-6)mol/L。该方法简单、经济、快速,对发展其它手性化合物的检测方法提供了参考。     

Electrochemical Determination of Phenylethanolamine A Based on Nafion/MWCNTs/AuNPs Modified Carbon Electrode

Phenylethanolamine A (PEA), a β‐agonist, was found to be illegally used as a growth promoter in pigs last year, causing Chinese government's great attention. Here, a sensitive electrochemical method was developed for detecting PEA by immobilization of gold nanoparticles (AuNPs), multiwalled carbon nanotubes (MWCNTs) and Nafion on the surface of a glassy carbon electrode (GCE). The Nafion/MWCNTs/AuNPs film was characterized by scanning electronic micrographs (SEM) and electrochemical impedance spectroscopy (EIS). The electrochemical behaviors of PEA at the modified GCE were investigated in detail. The synergetic effects of AuNPs, MWCNTs and Nafion amplify the electrochemical reduction signal of PEA, and result in high sensitivity for PEA determination. Under the optimal conditions, the electrochemical sensor shows a wide linear range of 0.01 to 10 (mol/L with a detection limit of 0.005 µmol/L. Moreover, the fabricated sensor presents high selectivity and long‐term stability, which paves a new way for simple, rapid, sensitive detection of PEA.     

Carbon nanotubes/alizarin red S–poly(vinylferrocene) modified glassy carbon electrode for selective determination of dopamine in the presence of ascorbic acid

A modified electrode was fabricated by electrochemical formation of poly(vinylferrocene) on the multi-wall carbon nanotube-alizarin red S matrix covered glassy carbon electrode. A higher electrochemical activity was obtained to the electrocatalytic oxidation of dopamine. The electrode surface was characterized electrochemically and spectroscopically. Poly(vinylferrocene) (PVF) in electrode was used as an electron transfer mediator in the electrochemical oxidation of compounds due to its perfect reversible redox properties. Multi-wall carbon nanotubes (MWCNTs) / alizarin red S (ARS)–PVF electrode was used to the determination of dopamine in the presence of ascorbic acid in 0.1 M sulphate buffer solution at pH 7. The performance of the MWCNTs/ARS–PVF electrode was evaluated by DPV and amperometry.     

Electrochemical DNA Biosensors Based on Palladium Nanoparticles Combined with Carbon Nanotubes

Palladium nanoparticles, in combination with multi‐walled carbon nanotubes (MWCNTs), were used to fabricate a sensitivity‐enhanced electrochemical DNA biosensor. MWCNTs and palladium nanoparticles were dispersed in Nafion, which were used to modify a glassy carbon electrode (GCE). Oligonucleotides with amino groups at the 5′ end were covalently linked onto carboxylic groups of MWCNTs on the electrode. The hybridization events were monitored by differential pulse voltammetry (DPV) measurement using methylene blue (MB) as an indicator. Due to the ability of carbon nanotubes to promote electron‐transfer and the high catalytic activities of palladium nanoparticles for electrochemical reaction of MB, the sensitivity of presented electrochemical DNA biosensors was remarkably improved. The detection limit of the method for target DNA was 1.2×10^?13 M.