Direct amination of isobutylene over zeolite catalysts with various topologies and acidities

The atomically economic and green chemical reaction of direct amination of isobutylene to tertbutylamine, particularly under the relative mild reaction conditions available for future industrial use,was carried out over zeolite catalysts possessing different topological structures, from one dimensional to three dimensional pore system, and from small 8-member ring pore(MRP) to medium 10 MRP and further to large 12 MRP zeolites, to disclose the relationship between the zeolite properties/topologies and their amination performance systematically under the mild reaction conditions. It was discovered that the pore structure and the acidities of zeolite catalysts played crucial roles in the isobutylene amination process, and suitable pore diameter(larger than 0.5 nm or with large side pockets/cups in the outside surface) and a certain number of mid-strong acid sites are indispensable to catalyze the amination reaction,while too strong acid strength was not conducive to the process of isobutylene amination. Among them,zeolites with topologies of BEA, MFI, MEL, MWW and EUO exhibited good amination performance, with which the isobutylene conversion was higher than 12.61%(46.42% of the equilibrium conversion) under the studied mild reaction conditions. Due to the good amination performance and the large adjustable Si/Al_2 ratio range, ZSM-5 was selected to further study the effect of acidity on the amination performance systematically under the mild reaction conditions, and the activity-acidity relationship in the amination process was disclosed: the amination activity(isobutylene conversion) had a linear correlation with the amount of mid-strong B acidity under the studied conditions over ZSM-5 catalyst, which can provide guidance for further developing high-efficient amination catalyst under mild reaction conditions available for future industrial use.     

Recent advances in transition metal-catalyzed sp3 C-H amination adjacent to double bonds and carbonyl groups

Transition metal-catalyzed C-H amination at positions adjacent to double bonds and carbonyl groups is discussed in this critical review. While the focus will center on the recent developments of α-oxidative amination, some historical developments and mutually beneficial reports in the broader field of C-H amination will be discussed. C-H amination has become a viable method for the efficient installation of nitrogen atoms en route to target molecules (89 references).     

Copper‐Catalyzed Electrophilic Amination of Heteroarenes and Arenes by CH Zincation

Direct amination of heteroarenes and arenes has been achieved in a one‐pot C? H zincation/copper‐catalyzed electrophilic amination procedure. This amination method provides an efficient and rapid approach to access a diverse range of heteroaromatic and aromatic amines including those previously inaccessible using C? H amination methods. The mild reaction conditions and good functional‐group compatibility demonstrate its great potential for the synthesis of important and complex amines.     

Copper‐Catalyzed Electrophilic Amination of Heteroarenes and Arenes by C?H Zincation

Direct amination of heteroarenes and arenes has been achieved in a one‐pot C H zincation/copper‐catalyzed electrophilic amination procedure. This amination method provides an efficient and rapid approach to access a diverse range of heteroaromatic and aromatic amines including those previously inaccessible using C H amination methods. The mild reaction conditions and good functional‐group compatibility demonstrate its great potential for the synthesis of important and complex amines.     

Rhodium(III)-catalyzed intermolecular direct amination of aromatic C-H bonds with N-chloroamines

A Rh(III)-catalyzed direct aromatic C-H amination is achieved using N-chloroamines as a reagent. Furthermore, we also developed a one-pot amination protocol involving in situ chlorination of the secondary amines. The catalytic amination operates at mild conditions with excellent functional group tolerance and regioselectivity.     

Copper-catalyzed electrophilic amination of organozinc nucleophiles: documentation of O-benzoyl hydroxylamines as broadly useful R2N(+) and RHN(+) synthons

[reaction: see text] This paper details new copper-catalyzed electrophilic amination reactions of diorganozinc reagents using O-benzoyl hydroxylamines as electrophilic nitrogen sources that may be accessed in one step. Simple and functionalized aryl, heteroaryl-, benzyl, n-alkyl, sec-alkyl, and tert-alkyl nucleophiles couple with R2NOC(O)Ph and RHNOC(O)Ph reagents in the presence of catalytic quantities of copper salts to provide tertiary and secondary amines, respectively, in generally good yields. In many cases, the product may be isolated analytically pure after a simple extractive workup. The amination process is shown to tolerate a significant degree of steric demand. The amination of nominally unreactive C(aryl)-H bonds via a sequential directed ortho metalation/transmetalation/catalytic amination reaction sequence is detailed. The direct Cu-catalyzed amination of Grignard reagents using cocatalysis by ZnCl2 is described.     

Aminoazanium of DABCO: An Amination Reagent for Alkyl and Aryl Pinacol Boronates

The aminoazanium of DABCO (H₂N‐DABCO) has been developed as a general and practical amination reagent for the direct amination of alkyl and aryl pinacol boronates. This compound is stable and practical for use as a reagent. Various primary, secondary. and tertiary alkyl?Bpin and aryl?Bpin substrates were aminated to give the corresponding amine derivatives. The amination is stereospecific. The anti‐Markovnikov hydroamination of olefins was easily achieved by catalytic hydroboration with HBpin and in subsequent situ amination using H₂N‐DABCO. Moreover, the combination of 1,2‐diboration of olefins, using B₂pin₂, with this amination process achieved the unprecedented 1,2‐diamination of olefins. The amination protocol was also successfully extended to aryl pinacol boronates.     

Highly efficient asymmetric amination of β-keto esters catalyzed by chiral quaternary ammonium bromides

A highly efficient asymmetric amination of β-keto esters was achieved under phase transfer conditions using chiral quaternary ammonium bromide as a catalyst. The amination products were obtained in quantitative yields with up to 97% ee. One of the amination products represents a key intermediate for the preparation of aldose reductase inhibitor AS-3201.     

Enantioselective organocatalytic reductive amination

The first enantioselective organocatalytic reductive amination reaction has been accomplished. The development of a new chiral phosphoric acid catalyst has provided a convenient strategy for the enantioselective construction of protected primary amines and provided a highly stereoselective method for the reductive amination of heterocyclic amines. A diverse spectrum of ketone and amine substrates can be accommodated in high yield and excellent enantioselectivity. This new protocol realizes a key benefit of reductive amination versus imine reduction, in that ketimines derived from alkyl-alkyl ketones are unstable to isolation, a fundamental limitation that is comprehensively bypassed using this direct organocatalytic reductive amination.     

Cosolvent‐promoted electrophilic amination of organozinc reagents

In this study, we aimed to develop a simple and efficient method for the electrophilic amination of organozinc reagents. For this reason, 12 cosolvents were screened in the electrophilic amination of ordinary organozinc reagents. By the use of a cosolvent, an easily applicable and high‐yielding method for the preparation of arylamines by electrophilic amination of arylzinc reagents was developed. Copyright © 2009 John Wiley & Sons, Ltd.     

Examination of the mechanism of the intramolecular amination of N-(3-bromopyridin-2-yl)azaheteroarylamines and N-(2-chloropyridin-3-yl)azaheteroarylamines: a Pd-catalyzed amination and/or a base-assisted nucleophilic aromatic substitution?

The intramolecular amination of N-(3-bromopyridin-2-yl)azaheteroarylamines and N-(2-chloropyridin-3-yl)azaheteroarylamines was investigated. In this way we unraveled the mechanism of the ring closure reaction in the auto-tandem amination (inter- and intramolecular Pd-catalyzed amination) of 2,3-dibromopyridine with amino(benzo)(di)azines and 2-chloro-3-iodopyridine with amino(benzo)(di)azines, respectively. Depending on the substrate a Pd-catalyzed amination, a base-assisted nucleophilic aromatic substitution or a combination of both is occurring. An explanation based on the aromaticity of the amidine, supported by theoretical calculations, is provided. In addition we gained evidence that the intramolecular metal-catalyzed amination of N-(3-bromopyridin-2-yl)azaheteroarylamines and N-(2-chloropyridin-3-yl)azaheteroarylamines indeed involves a nitrogen atom that is not substituted with a hydrogen atom.     

钯催化卤代芳烃的胺化反应研究

钯催化卤代芳烃胺化是形成Car-N的重要方法.配体的发展扩展了底物的适用范围, 提高了反应的选择性,实现了廉价易得的氯代芳烃的胺化,弱碱的使用提高了官能团的兼 容性,因此Pd催化芳胺化广泛应用于合成芳胺类化合物.本文以卤代芳烃为线索,对钯催化偶联胺化反应的研究进展进行了综述和展望.     

Improving glycopeptide synthesis: a convenient protocol for the preparation of beta-glycosylamines and the synthesis of glycopeptides

[reaction: see text] Herein we apply a recently introduced protocol using ammonium carbamate in methanol to the amination of crude chitobiose leading to 1,beta-aminochitobiose. This simple, one-step procedure allows a facile preparation of unstable glycosylamines in contrast to the commonly implemented ammonium bicarbonate based amination of water-soluble carbohydrates. The new amination protocol leads to an improved synthesis of the key chitobiosyl-asparagine building block for the SPPS of glycopeptides. The utility of the method is demonstrated with the synthesis of a 39-amino acid glycoprotein.     

Intermolecular Radical C(sp3)−H Amination under Iodine Catalysis

The direct amination of aliphatic C?H bonds has remained one of the most tantalizing transformations in organic chemistry. Herein, we report on a unique catalyst system, which enables the elusive intermolecular C(sp³)?H amination. This practical synthetic strategy provides access to aminated building blocks and fosters innovative multiple C?H amination within a new approach to aminated heterocycles. The synthetic utility is demonstrated by the synthesis of four relevant pharmaceuticals.     

Palladium‐Catalyzed Amination of Aryl Sulfides with Anilines

A combination of a palladium–NHC catalyst and potassium hexamethyldisilazide enables the amination of aryl sulfides with anilines to afford a wide variety of diarylamines. The reaction conditions are versatile enough for the reaction of even bulky ortho‐substituted aryl sulfides. This amination can be applied to the modular synthesis of N‐aryl carbazoles from the corresponding ortho‐bromothioanisoles. As aryl sulfoxides undergo extended Pummerer reactions to afford ortho‐substituted aryl sulfides, the Pummerer products are thus useful substrates for the amination to culminate in efficient syntheses of a 2‐anilinobenzothiophene and an indole as proof‐of‐principle of the utility of the extended Pummerer reaction/amination cascade.     

Enantioselective synthesis of 2,5-dihydrobenzo[b]azepine derivatives via iridium-catalyzed asymmetric allylic amination with 2-allylanilines and ring-closing-metathesis reaction

Iridium-catalyzed asymmetric allylic amination of allylic carbonates with 2-allylanilines was realized. With a catalyst generated from 2 mol% of [Ir(dbcot)Cl](2) (dbcot = dibenzo[a,e]cyclooctatetraene) and 4 mol% of phosphoramidite ligand (L3), the amination products were obtained in up to 99% yield and 99% ee. Subjecting amination products to trifluoroacetyl protection and ring-closing-metathesis reaction provided an efficient synthesis of enantioenriched 2,5-dihydrobenzo[b]azepine derivatives.     

An air-stable palladium/N-heterocyclic carbene complex and its reactivity in aryl amination

[reaction: see text] The synthesis and characterization of [Pd(IPr)Cl(2)](2) (1), an air- and moisture-stable complex, is reported. The utilization of 1 as a catalyst for amination of aryl chlorides and bromides with a variety of amine coupling partners under mild conditions is described. The amination reactions with 1 show a remarkable insensitivity to oxygen and water, and thus the amination reactions could be performed in air on the benchtop with undried reagent grade solvents and substrates with small effects on reaction times and conversions.     

Electrophilic amination of 4-fluorophenol with diazenes: a complete removal of the fluorine atom

The electrophilic amination of 2-fluorophenol, 4-fluorophenol, and 2-chlorophenol was observed to occur as a result of their treatment with diazenes 1-4 under mild reaction conditions in the presence of ZrCl(4). The products originating from the 2-fluorophenol or 2-chlorophenol can be considered as "normal" products of amination. On the other hand, the 2-chloro-4-amino-substituted phenols obtained from the 4-fluorophenol seem to be formed in a process that involves an ipso amination, the complete removal of the fluorine atom, and the introduction of the chlorine atom.     

Bulky alkylphosphines with neopentyl substituents as ligands in the amination of aryl bromides and chlorides

Di(tert-butyl)neopentylphosphine (DTBNpP) in combination with palladium sources provided catalysts with comparable or better activity for the Hartwig-Buchwald amination of aryl bromides than tri(tert-butyl)phosphine (TTBP) under mild conditions. DTBNpP also provided effective catalysts for amination reactions of aryl chlorides at elevated temperatures. Further replacement of tert-butyl groups with neopentyl substituents resulted in less effective ligands for amination reactions. Computationally derived cone angles showed that replacement of a tert-butyl group with a neopentyl group significantly increased the cone angle of the phosphine. The larger cone angle of DTBNpP than TTBP appears to correlate with the higher activity of catalysts derived from DTBNpP in the amination of aryl bromides. TTBP is a stronger electron donor than DTBNpP, which may explain the higher activity for TTBP-derived catalysts toward aryl chlorides.     

Tuneable asymmetric copper-catalysed allylic amination and oxidation reactions

Asymmetric allylic amination or oxidation can be achieved by reaction of an alkene with a peroxycarbamate catalysed by a chiral copper bis-oxazoline complex, and the reaction can be tuned to give either the amination or oxidation product by reagent choice.