Integration of a nonlinear energy sink and a piezoelectric energy harvester

A mechanical-piezoelectric system is explored to reduce vibration and to harvest energy. The system consists of a piezoelectric device and a nonlinear energy sink(NES), which is a nonlinear oscillator without linear stiffness. The NES-piezoelectric system is attached to a 2-degree-of-freedom primary system subjected to a shock load. This mechanical-piezoelectric system is investigated based on the concepts of the percentages of energy transition and energy transition measure. The strong target energy transfer occurs for some certain transient excitation amplitude and NES nonlinear stiffness. The plots of wavelet transforms are used to indicate that the nonlinear beats initiate energy transitions between the NES-piezoelectric system and the primary system in the transient vibration, and a 1:1 transient resonance capture occurs between two subsystems.The investigation demonstrates that the integrated NES-piezoelectric mechanism can reduce vibration and harvest some vibration energy.     

Stochastic analysis of a nonlinear energy harvester with fractional derivative damping

Nonlinear Dynamics - A fractionally damped vibration energy harvester excited by the wide-band random noise is investigated theoretically in this paper. Firstly, by introducing the generalized...     

Probabilistic analysis and ghost-stochastic resonance of a hybrid energy harvester under Gaussian White noise

Meccanica - In this present work, a hybrid energy scavenger using two mechanisms of transduction namely piezoelectric and electromagnetic and subjected to the Gaussian white noise is investigated....     

Performance analysis of parametrically and directly excited nonlinear piezoelectric energy harvester

Archive of Applied Mechanics - The performance of bimorph cantilever energy harvester subjected to horizontal and vertical excitations is investigated. The energy harvester is simulated as an...     

Response analysis of the piezoelectric energy harvester under correlated white noise

Nonlinear Dynamics - Energy harvesting of a monostable duffing-type harvester with piezoelectric coupling under correlated multiplicative and additive white noise is investigated in this paper. The...     

Effects of springs on a pendulum electromechanical energy harvester

This paper studies a model of energy harvester that consists of an electromechanical pendulum system subjected to nonlinear springs. The output power is analyzed in terms of the intrinsic parameters of the device leading to optimal parameters for energy harvesting. It is found that in an appropriate range of the springs constant, the power attains higher values as compared to the case without springs. The dynamical behavior of the device shows transition to chaos.     

参数和直接激励下非线性压电俘能器性能分析的多尺度法

考虑几何非线性、阻尼非线性和梁的轴向不可伸长条件,利用Hamilton变分原理,建立了参数激励和直接激励下压电俘能器的非线性力电耦合的运动微分方程;利用Galerkin法,将所建立的动力学偏微分方程降阶为力电耦合的Mathieu-Duffing型方程;采用多尺度法获得了梁的位移和输出电压的解析表达式,给出了解的稳定性条件;利用解析表达式研究了单独参数激励以及参数激励和直接激励共同作用下阻尼系数对压电俘能器性能的影响。结果表明,在参数激励情况下,线性阻尼会显著影响超临界分岔点的位置,非线性二次阻尼不会影响超临界分岔点的位置。参数激励和直接激励的结合可以作为提升压电能量俘获器性能的解决方案。     

Dynamic analysis of piezoelectric energy harvester under combination parametric and internal resonance: a theoretical and experimental study

In this work, theoretical and experimental analysis of a piezoelectric energy harvester with parametric base excitation is presented under combination parametric resonance condition. The harvester consists of a cantilever beam with a piezoelectric patch and an attached mass, which is positioned in such a way that the system exhibits 1:3 internal resonance. The generalized Galerkin’s method up to two modes is used to obtain the temporal form of the nonlinear electromechanical governing equation of motion. The method of multiple scales is used to reduce the equations of motion into a set of first-order differential equations. The fixed-point response and the stability of the system under combination parametric resonance are studied. The multi-branched non-trivial response exhibits bifurcations such as turning point and Hopf bifurcations. Experiments are performed under various resonance conditions. This study on the parametric excitation along with combination and internal resonances will help to harvest energy for a wider frequency range from ambient vibrations.

     

悬臂梁挠曲电俘能器的力电耦合模型及性能分析

挠曲电效应指应变梯度在电介质中引起的电极化现象,是一种普遍存在的力电耦合行为。应变梯度与材料的尺寸成反比,因此挠曲电效应有望在纳米尺度主导材料的物理性质,尤其是力电耦合性能。本文建立了悬臂梁挠曲电俘能器的理论模型,基于哈密顿原理得到了悬臂梁挠曲电俘能器的控制方程和相应的边界条件;进一步,得到了悬臂梁挠曲电俘能器的输出电压频率响应和功率密度频率响应随悬臂梁的振动频率、外电路阻抗、挠曲电层厚度以及弹性层模量的变化规律。聚偏氟乙烯和环氧树脂层合挠曲电悬臂梁俘能器模型的数值结果表明输出电压频率响应和功率密度频率响应在共振频率点取得最大值,且随着各阶模态对应的共振频率的增加悬臂梁挠曲电俘能器的输出电压和功率密度均增加。此外,计算结果还表明悬臂梁俘能器存在最佳匹配阻抗,在匹配阻抗附近悬臂梁俘能器的输出功率密度随挠曲电层厚度的减小而增大,表现出明显的尺寸效应。本文工作提供了一种基于挠曲电效应的悬臂梁俘能器的理论模型,为悬臂梁俘能器的设计提供了理论依据。     

A component coupling approach to dynamic analysis of a buckled,bistable vibration energy harvester structure

Nonlinear Dynamics - Over the past ten years, the energy harvesting community has focused on bistable structures as a means of broadening the working frequency range and, by extension, the...     

具有弹性放大器的双稳态压电俘能器建模及参数影响分析

利用广义Hamilton变分原理,建立了具有弹性放大器的双稳态压电俘能系统BPH+EM的动力学方程。考虑谐波激励,采用调和平衡法获得了BPH+EM系统的位移、输出电压和功率的解析解。利用求得的解析解,讨论了BPH+EM系统扩大能量俘获的频率范围和提高能量俘获效率的机理,研究了弹性放大器的刚度质量比对BPH+EM系统的动力性能影响规律。当弹性放大器的刚度质量比趋于无限大时,具有弹性放大器的双稳态压电俘能系统退化为双稳态压电俘能系统BPH。弹性放大器的刚度质量比趋于0但不等于0时,BPH+EM的俘能效率低于BPH。结果表明,在合适的刚度质量比范围内,BPH+EM的俘能效率显著优于BPH。研究结果为BPH+EM系统的优化设计提供了理论指导。     

悬臂梁挠曲电俘能器的力电耦合模型及性能分析

挠曲电效应指应变梯度在电介质中引起的电极化现象,是一种普遍存在的力电耦合行为。应变梯度与材料的尺寸成反比,因此挠曲电效应有望在纳米尺度主导材料的物理性质,尤其是力电耦合性能。本文建立了悬臂梁挠曲电俘能器的理论模型,基于哈密顿原理得到了悬臂梁挠曲电俘能器的控制方程和相应的边界条件;进一步,得到了悬臂梁挠曲电俘能器的输出电压频率响应和功率密度频率响应随悬臂梁的振动频率、外电路阻抗、挠曲电层厚度以及弹性层模量的变化规律。聚偏氟乙烯和环氧树脂层合挠曲电悬臂梁俘能器模型的数值结果表明输出电压频率响应和功率密度频率响应在共振频率点取得最大值,且随着各阶模态对应的共振频率的增加悬臂梁挠曲电俘能器的输出电压和功率密度均增加。此外,计算结果还表明悬臂梁俘能器存在最佳匹配阻抗,在匹配阻抗附近悬臂梁俘能器的输出功率密度随挠曲电层厚度的减小而增大,表现出明显的尺寸效应。本文工作提供了一种基于挠曲电效应的悬臂梁俘能器的理论模型,为悬臂梁俘能器的设计提供了理论依据。     

On the efficacy of charging a battery using a chaotic energy harvester

Nonlinear Dynamics - Introduction of stiffness nonlinearities to broaden the frequency bandwidth of vibratory energy harvesters has the adverse influence of complicating the response behavior of...     

Bifurcation analysis and nonlinear dynamics of a capacitive energy harvester in the vicinity of the primary and secondary resonances

Nonlinear Dynamics - The objective of the present study is to examine the effect of nonlinearity on the efficiency enhancement of a capacitive energy harvester. The model consists of a cantilever...     

Robust design optimization of a nonlinear monostable energy harvester with uncertainties

Meccanica - Based on the improved interval extension, a robust optimization method for nonlinear monostable energy harvesters with uncertainties is developed. In this method, the 2nd order terms in...     

Performance of a flapping foil flow energy harvester in shear flows

Through numerical simulations, we investigate the energy harvesting performance of a heaving/pitching foil in shear flow. With two-dimensional Navier–Stokes simulations, we examined the energy harvesting efficiencies of such a system in linear shear flows and compared the results with those in uniform flows. It is found that in low shear rates, the performance of the system in linear shear flow is slightly higher than that in uniform flow, whereas the energy harvesting efficiency is greatly diminished if the shear rate is sufficiently high (this effect is more pronounced in higher frequencies). This is attributed to the effects of linear shear on the vorticity generation and the synchronization between fluid forcing and foil motion – when a strong shear flow is introduced the lift force induced by the leading edge vortex that is in phase with the heaving motion of the foil is diminished. Furthermore, by studying the instability of the wake behind the foil, we confirm that the optimal performance of the foil in linear shear flows is associated with the same physical mechanism that controls the performance of the foil in uniform flows, i.e. the excitation of the most unstable modes in the wake when the oscillation frequency of the foil is close to the frequencies of these modes.     

Time delay improves beneficial performance of a novel hybrid energy harvester

Nonlinear Dynamics - The performances of an energy harvester are usually limited. To improve these, the time-delayed feedback control is used in a novel nonlinear hybrid energy harvester for...     

Nonlinear dynamics and performance analysis of modified snap-through vibration energy harvester with time-varying potential function

Vibration energy harvesting has emerged as a promising method to harvest energy for small-scale applications. Enhancing the performance of a vibration energy harvester(VEH) incorporating nonlinear techniques, for example, the snap-through VEH with geometric non-linearity, has gained attention in recent years. A conventional snap-through VEH is a bi-stable system with a time-invariant potential function, which was investigated extensively in the past. In this work, a modified snap-through VEH wit...