改性凹凸棒的制备及对砷离子的吸附研究

针对日益严重的砷离子污染问题，本文采用灵敏简便的原子荧光分析法，探究了凹凸棒石粘土吸附剂对砷离子的吸附性能，测定了pH、吸附时间、砷离子的初始浓度等因素对凹凸棒石粘土负载铁氧化物对砷离子吸附能力的影响，并通过SEM、EDX、FTIR对所制得的吸附剂进行了表征研究，同时进行了吸附动力学和吸附等温模型的分析。研究结果表明，改性后的凹凸棒对砷离子的吸附性能有了显著提升，在较低浓度时吸附效率可达98%，该吸附符合Langmuir等温吸附模型和准二级动力学方程。     

Removal of Cd(II) and Pb(II) from aqueous solution by modified attapulgite clay

Three low-cost adsorbents (purified raw attapulgite (A-ATP), high-temperature-calcined attapulgite (T-ATP), and hydrothermal loading of MgO (MgO-ATP)) were prepared as adsorbents for the removal of Cd(II) and Pb(II). By evaluating the effect of the initial solution pH, contact time, initial solution concentration, temperature and coexistence of metal ions on Cd(II) and Pb(II) adsorption, the experimental results showed that MgO-ATP was successfully prepared by hydrothermal reaction and calcination as well as appearing to be a promising excellent adsorbent. At an initial pH of 5.0, A-ATP, T-ATP and MgO-ATP reached maximum adsorption amounts of 43.5, 53.9 and 127.6 mg/g for Pb(II) and 10.9, 11.2, and 25.3 mg/g for Cd(II) at 298 K, respectively. The Cd(II) adsorption on A-ATP was fitted by the Freundlich model, while the adsorption of Pb(II) and Cd(II) on T-ATP and MgO-ATP as well as Pb(II) adsorption on A-ATP agreed with the Langmuir model. All kinetic experimental data favored pseudo second-order model. The calculated thermodynamic parameters suggested that Pb(II) adsorption onto MgO-ATP was spontaneous and exothermic. When considering foreign metal ions, the three adsorbents all presented preferential adsorption for Pb (II). Chemical adsorption had a high contribution to the removal of Cd(II) and Pb(II) by modified attapulgite. In summary, the adsorption was greatly enhanced by the hydrothermal loading of MgO. It aimed to provide insights into the MgO-ATP, which could be able to efficiently remove Cd(II) and Pb(II) and serve as an economic and promising adsorbent for heavy metal-contaminated environmental remediation.     

聚苯胺/凹凸棒石纳米纤维复合材料对溶液中痕量Cr(VI)的吸附性能

采用原位聚合法合成了盐酸掺杂聚苯胺/凹凸棒石黏土(PANI/ATP)纳米纤维复合材料。 研究了它对含痕量Cr(Ⅵ)废水的吸附,考察了物料配比、投料质量、吸附时间、吸附温度和pH值对其吸附性能的影响。 结果表明,复合材料中的物料配比为m(An)∶m(ATP)=2∶1,用量为0.4 g,50 min时对Cr(Ⅵ)的吸附量达到99.8%,符合Langmuir等温吸附方程。 该复合材料充分发挥了有机和无机吸附材料的协同作用,具有成本低、再生性能良好的特点。     

Synthesis and characterization of CDs/Al2O3 nanofibers nanocomposite for Pb2+ ions adsorption and reuse for latent fingerprint detection

This study reports a new approach of preparation of carbon dots coated on aluminum oxide nanofibers (CDs/Al₂O₃NFs) nanocomposite and reusing the spent adsorbent of lead (Pb²⁺) ions loaded adsorbent (Pb²⁺-CDs/Al₂O₃NFs) nanocomposite for latent fingerprint detection (LFP) after removing Pb²⁺ ions from aqueous solution. CDs/Al₂O₃NFs nanocomposite was prepared by using CDs and Al₂O₃NFs with adsorption processes. The prepared nanocomposite was then characterized by using UV–visible spectroscopy (UV–visible), Fourier transforms infrared spectroscopy (FTIR), Fluorescence, X-ray diffraction pattern (XRD), scanning electron microscope (SEM), Transmission electron microscopy (TEM), Energy-dispersive X-ray spectroscopy (EDS), Zeta potential, X-ray photoelectron spectroscopy (XPS). The average size of the CDs was 51.18 nm. The synthesized CDs/Al₂O₃NFs nanocomposite has proven to be a good adsorbent for Pb²⁺ ions removal from water with optimum pH 6, dosage 0. 2 g/L. The results were best described by the Freundlich Isotherm model. The adsorption capacity of CDs/Al₂O₃NFs nanocomposite showed the best removal of Pb²⁺ ions with q_m = (177. 83 mg/g), when compared to the previous reports. This adsorption followed the pseudo-second order kinetic model. ΔG and ΔH values indicated spontaneity and the endothermic nature of the adsorption process. CDs/Al₂O₃NFs nanocomposite therefore showed potential as an effective adsorbent. The data were observed from adsorption–desorption after 6 cycles which showed good adsorption stability and re- usability of CDs/Al₂O₃NFs nanocomposite. Furthermore, the spent adsorbent of Pb²⁺-CDs/Al₂O₃NFs nanocomposite has proven to be sensitive and selective for LFP detection on various porous substrates. Hence Pb²⁺-CDs/Al₂O₃NFs nanocomposite can be reused as a good fingerprint labelling agent in LFP detection so as to avoid secondary environmental pollution by disposal of the spent adsorbent.     

Nanocomposite Silica Aerogel Activated Carbon: Preparation,Characterization and Application to Remove Lead(II) from Aqueous Solutions

Anovel nanocomposite adsorbent, Silica aerogel activated carbon (SA‐AC) has been prepared for the purpose of removing lead ions from aqueous solution in batch process. The nanocomposite was characterized by Fourier transform infrared spectra (FTIR) and scanning electron microscope (SEM). In the present investigation, Pb(II) adsorption experiments on nanocomposite were conducted on aqueous solution at different initial Pb(II) concentration, pH of the solution, adsorption temperature, adsorbent dosage and contact time. Optimum pH for the adsorption was found to be 6 with corresponding adsorbent dosage level of 0.5 g and 60 °C temperature. The equilibriumwas achieved within 30 min of contact time. It is remarkable that using the developed nanocomposite absorbent, more than 90% of Pb(II) can be removed under desirable experimental conditions. The efficiency of the ions adsorption was determined using atomic absorption spectroscopy. Langmuir and Freundlich isotherm models were applied to analyze the experimental data. The best interpretation for the experimental data was given by the Freundlich isotherm equation. Desorption experiments by elution of the adsorbent with nitric acid show that the nanocomposite could be reused without significant losses of its initial properties.     

Chemical and biological treatment of waste water with a novel silver/ordered mesoporous alumina nanocomposite

One of the serious problems in the present century is chemical and biological pollution of the environment. Nanocomposites are multiphase solid materials that have been used as adsorbent of pollutants such as dyes, pesticides, anions and etc. in the last decades. In this study, a novel nanocomposite including silver nanoparticles and ordered mesoporous alumina (OMA) has been synthesized and used for the removal of dyes pollutants (methyl orange, bromothymol blue and reactive yellow) from aqueous solution. The characterization of synthesized nanocomposite has been performed by TEM, N₂ adsorption/desorption, XRD and energy dispersive X-ray spectroscopy analysis. The adsorption kinetic and equilibrium data have been obtained by UV–vis spectroscopy. The results show that the silver/OMA nanocomposite (Ag/OMA nanocomposite) is good adsorbent for the removal of anionic dyes from aqueous solution, and also this nanocomposite has a biocidal action against both Gram-negative and Gram-positive bacteria.     

New route for removal of Cu(II) using fabricated nanocomposite based on cationic surfactant/Ag-nanoparticles/silica gel

Generally, the treated wastewater must at least achieve the minimum safety standards for the purpose of the treatment process. The main target of this work is the combination of the features of surfactants, nanoparticles, and silica gel in one system for Cu(II) removal from the aqueous solution. To achieve this goal, the attempt would be made by the fabrication of nanocomposite based on 4-amino-N-tetradecyl pyridinium bromide (C14) coated silver nanoparticles and silica gel. The fabricated nanocomposite (C14-Ag-SG) was characterized using different techniques such as FTIR, XRD, XRF, SEM, and TEM. We examined the adsorption of Cu(II) ions onto the fabricated nanocomposite using batch adsorption. The effect of the contact time, pH of the solution, and mass of the adsorbent on the efficiency of adsorption was evaluated. The adsorption capacity of Cu(II) increased by increasing of the contact time with a neutral pH. The maximum removal of Cu(II) ions (98.57 %) was found using 0.4 g of the (C14-Ag-SG) nanocomposite. The fabricated nanocomposite showed high adsorption efficiency which clarifies the effect of the surfactant compound (C14) and silver nanoparticles in improving the adsorption efficiency. The results in this work suggest that the fabricated nanocomposite has high efficiency in the removal of Cu(II).     

Highly efficient removal of toxic lead ions from aqueous solutions using a new magnetic metal‐organic framework nanocomposite

A magnetic metal‐organic framework (MOF) nanocomposite was successfully prepared by a new and green strategy through reasonable design. Magnetic MOF of Fe₃O₄‐NHSO₃H@HKUST‐1 nanocomposite use for removal of lead ions as an environmental pollutant. The experimental results indicated that the nano adsorbent of Fe₃O₄‐NHSO₃H@HKUST‐1 can removed lead ions under optimum operational conditions. The dosage of the nanocomposite, pH of the sample solution, and contact time were obtained to be 10 mg, 7.0, and 90 min, respectively, while the initial concentration of Pb(II) ions of 400 mg/L was used. A kinetic study indicated that a pseudo‐second‐order model agreed well with the experimental data. The isotherm experiments revealed that the Langmuir model attained better fits to the equilibrium data than the Freundlich model. The maximum adsorption capacity of the adsorbent for the removal of lead under the optimum operational conditions of pH 7.0 and temperature 25°C was found to be 384.6 mg/g. The thermodynamic parameters indicate that the adsorption of lead is spontaneous and endothermic. The magnetic MOF nanocomposite could be recovered easily and reused many times without significant loss of its nano‐adsorbent activity. The proposed method is simple, eco‐friendly, low cost, and efficient in the removal of lead ions from aqueous solutions.     

凹凸棒土粘结剂对13X分子筛吸附性能的促进作用

以凹凸棒土为粘结剂制备了13X分子筛吸附剂.研究了其孔结构、表面电性和对水、CO2和N2分子的吸附性能,并与高岭土为粘结剂的同类吸附剂进行了比较.结果表明,凹凸棒土发达的孔隙结构、大的比表面和表面负电性质有利于其吸附容量的改善,而13X/凹凸棒土中丰富的中孔促进了其对CO2的吸附速率.另外由CO2吸附热力学分析可知,CO2在13X/凹凸棒土上具有较低的吸附热,结果将有利于其在吸附剂上的脱附.     

Humic Acid Removal by Combining the Magnetic Property of Maghemite with the Adsorption Property of Nanosized Hydroxyapatite

Maghemite incorporated hydroxyapatite (HAP) nanocomposite was prepared by in situ precipitation of the calcium phosphate phase in an iron oxide colloidal suspension. The resultant nanocomposite was characterized by x-ray diffraction, Fourier transform infrared spectrometer, transmission electron microscope, N₂ adsorption analysis, and vibrating sample magnetometry. The potential of HAP/γ-Fe₂O₃ nanocomposite for HA adsorption from aqueous solution was evaluated by batch experiments and adsorption kinetic tests. HA adsorption amount on the adsorbent decreased with increasing solution pH and the presence of KNO₃ and alkali-earth metal ions resulted in enhanced HA adsorption. HA adsorption onto HAP/γ-Fe₂O₃ nanocomposite could be well described by Freundlich and Sips models, while HA adsorption process on the adsorbent obeyed pseudo-second-order kinetics and the adsorption rates decreased with increasing initial HA concentration. This study showed that the HAP/γ-Fe₂O₃ nanocomposite could be used as an efficient and magnetically separable adsorbent for the removal of HA from aqueous solution. Subsequent studies demonstrated that the HA-loaded HAP/γ-Fe₂O₃ nanocomposite could be further applied for the highly efficient adsorption of methylene blue (MB) and separated from the medium by a simple magnetic process.     

Fabrication of renewable palm-pruning leaves based nano-composite for remediation of heavy metals pollution

The palm-pruning leaves considered as valuable source for low cost adsorbent materials. Such application, enhance the environmental conditions by reducing the bad effects from un-managed palm-pruning leaves such as spreading insects. Herein, the palm-pruning leaves were treated with by water and acid washing to produce cleaned palm leaves (CPL) and then impregnation with iron(III) chloride and thermally treated to produce palm leaves/iron oxide- nanocomposite (PL/IO-NC). The prepared materials were applied for adsorption of some toxic metal ions from solutions. The original palm-pruning leaves as well as the treated adsorbent were characterized by SEM, EDS, FTIR, XRD. Results showed the formation of spots iron oxide nanoparticles onto the palm-pruning leaves. The efficiency of the treated adsorbent for uptake of Mn(II), Co(II) and Pb(II) was studied in term of kinetic, isotherm and thermodynamic to optimize and evaluate the effectiveness of the palm-pruning leaves treatment. The adsorption data was found to be more comfortable with Second order kinetic-model while the isotherm of Langmuir wasn’t suitable and the adsorption data was in agreement with Freundlich assumption. The values of ΔG° in the range (−5.8 to −3.5 kJ/mol) for Mn(II), (−4.2 to −2.1 kJ/mol) for Co(II), (−3.4 to −2.3 kJ/mol) for Pb(II), confirm the confirm the spontaneous and physical nature of the adsorption process.     

Enrichment of copper and nickel with solid phase extraction using multiwalled carbon nanotubes modified with Schiff bases

The behaviour of some Schiff bases in the presence of metal ions is very selective in complex formation. In this study, new, selective and easily prepared adsorbent materials have been developed. Multiwalled carbon nanotubes (MWCNTs) are quite suitable as supporting material for preparation of new solid phase adsorbents modified with Schiff bases due to their selective nature. Different Schiff bases were designed and synthesised as adsorbent agents for Ni(II) and Cu(II) ions, according to the literature, and MWCNTs were modified with these Schiff bases. The modification of CNTs was performed by adsorption from the alcoholic solution of Schiff base. The measurements of Ni(II) and Cu(II) ions were carried out using ICP-MS. Different parameters such as pH, model and eluent solution flow rates, eluent type, amount of ligand, sample volume and effect of foreign ions, which have an effect upon recovery of analytes, were investigated. The obtained results indicated that enrichment can be done with six modified adsorbent materials for Cu(II) at pH 9 and two modified adsorbent materials for Ni(II) at pH 8. It was concluded that four adsorbent materials were selective only for the enrichment of Cu(II). Merely one modified adsorbent material was noneligible for the enrichment of Cu(II) and Ni(II). The solid phase adsorbents prepared by modification with two of the Schiff bases used in this study showed an enrichment factor of 80 for both metal ions, whereas the solid phase adsorbents prepared by modification with four of the Schiff bases showed an enrichment factor of 40 for Cu(II) ions. The confirmation of the developed method was tested with certified reference materials with satisfactory results.     

Itaconic copolymer modified loess for high-efficiently removing copper ions from wastewater

Using Loess of clay (LC) which is low-cost, highly hydrophilic and small granule materials, biocompatible itaconic acid (IA), 2-hydroxyethyl methacrylate (HEMA) and N-vinyl-2-pyrrolidone (NVP) as functional monomers, a novel biocompatible polymer composite adsorbent (LC/PIHN) was prepared by in-situ copolymerization. It was applied to remove copper ions from wastewater, and the mechanism of adsorption was investigated. It showed that the Cu(II) removal was more than 99.8% at room temperature. The adsorption kinetics and isotherms of LC/PIHN fit the pseudo-second-order model and the Freundlich model, respectively. In summary, LC/PIHN is a kind of biocompatible, low-cost and excellent polymer composite adsorbent for removing heavy metal ions from wastewater.     

ADSORPTION OF METHYLENE BLUE FROM AQUEOUS SOLUTION ON ATTAPULGITE

Batch adsorption experiments were carried out for the removal of methylene blue （MB） from aqueous solution using attapulgite as adsorbent. The effects of various parameters such as temperature, contact time, the pH value, and attapulgite dosage on the adsorption performance were investigated. The standard curve and regression equation were established by spectrophotometry. The adsorption experimental results showed that the adsorption equilibrium data were well in accord with Langmuir adsorptive model. The optimal result was acquired under the experimental condition of attapulgite dosage 0.18g, MB concentration 50.0mg/L, pH 10, and adsorption time 20min at room temperature.     

Preconcentration of metal ions on aluminum oxide modified with tiron

It is found that iron(III), titanium(IV), vanadium(V), copper(II), lead(II), and zinc(II) ions are adsorbed on aluminum oxide modified with Tiron. The adsorption of iron(III) is accompanied by the violet coloration of the adsorbent (560 nm), which indicates the formation of a 1: 2 complex on the adsorbent surface; copper forms a 1: 1 yellowish green complex (430 nm). The group preconcentration of metal ions on this adsorbent in a dynamic mode is possible; the preconcentration rate is 2.5 × 10³. The method for the determination of metal ions is proposed based on the adsorption recovery of the elements followed by the direct determination by X-ray fluorescence spectroscopy on the adsorbent surface.     

Mixed phase Fe2O3/Mn3O4 magnetic nanocomposite for enhanced adsorption of methyl orange dye: Neural network modeling and response surface methodology optimization

In this research, a novel magnetic mesoporous adsorbent with mixed phase of Fe₂O₃/Mn₃O₄ nanocomposite was prepared by a facile precipitating method and characterized extensively. The prepared nanocomposite was used as adsorbent for toxic methyl orange (MO) dye removal from aqua matrix considering its high surface area (178.27 m²/g) with high saturation magnetization (23.07 emu/g). Maximum dye adsorption occurs at solution pH 2.0 and the electrostatic attraction between anionic form of MO dye molecules and the positively charged nanocomposite surface is the main driving force behind this adsorption. Response surface methodology (RSM) was used for optimizing the process variables and maximum MO removal of 97.67% is obtained at optimum experimental condition with contact time, adsorbent dose and initial MO dye concentration of 45 min, 0.87 g/l and 116 mg/l, respectively. Artificial neural network (ANN) model with optimum topology of 3–5–1 was developed for predicting the MO removal (%), which has shown higher predictive ability than RSM model. Maximum adsorption capacity of this nanocomposite was found to be 322.58 mg/g from Langmuir isotherm model. Kinetic studies reveal the applicability of second‐order kinetic model with contribution of intra‐particle diffusion in this process.     

Solar light assisted degradation of dyes and adsorption of heavy metal ions from water by CuO–ZnO tetrapodal hybrid nanocomposite

We report a facile and economic hydrothermal process for multifunctionally engineered copper oxide/zinc oxide-tetrapods (CuO/ZnO-T) nanocomposite for wastewater treatment. The resultant CuO/ZnO-T nanocomposite possesses high porosity, large surface area, and low band gap. All these properties are advantageous for photocatalyst and adsorbent for dyes and heavy metal ions removal. The morphology of synthesized nanocomposite was characterized using X-ray diffraction, scanning electron microscopy, Brunauer–Emmett–Teller, Fourier-transform infrared spectroscopy, and UV–Visible absorption spectroscopy. The results confirmed the attachment of CuO on the ZnO-T surface, forming a hybrid nanocomposite. The concentration of heavy metal ions was monitored using the atomic absorption spectroscopy technique. The synthesized CuO/ZnO-T nanocomposite was investigated for the decontamination of anionic and cationic dyes, Reactive yellow-145 (RY-145) and Basic violet-3 (BV-3) and heavy metal ions (Chromium (VI) and Lead (II)). The CuO/ZnO-T nanocomposite exhibited superior photocatalytic efficiency (80% RY-145 dye removal and 86% BV-3 dye removal) and adsorption capacity (99% Chromium (VI) removal and 97% Lead (II) removal) as compared to pristine ZnO-T. The mechanism for the reduction of dyes and heavy metal ions was discussed by different kinetics and isotherm models. The current study inferred that CuO/ZnO-T nanocomposite is a potential candidate as a proficient photocatalyst/adsorbent for the removal of various wastewater contaminants.     

胍改性凹凸棒土对甲基橙的吸附

采用十六烷基胍改性凹凸棒土对甲基橙废水进行脱色处理,考察了吸附时间、吸附剂用量和染料浓度等因素对脱色效果的影响。 结果表明,十六烷基胍改性凹凸棒土对甲基橙废水具有很好的脱色性能,其对甲基橙废水脱色率达98%以上,与原凹凸棒土相比有显著提高。 平衡吸附量qe与平衡浓度ρe之间关系符合Langmuir等温吸附方程。 吸附热值小于40 kJ/mol,表观表现为物理吸附。     

Efficient Removal of Pb(II) from Aqueous Medium Using Chemically Modified Silica Monolith

The adsorptive removal of lead (II) from aqueous medium was carried out by chemically modified silica monolith particles. Porous silica monolith particles were prepared by the sol-gel method and their surface modification was carried out using trimethoxy silyl propyl urea (TSPU) to prepare inorganic–organic hybrid adsorbent. The resultant adsorbent was evaluated for the removal of lead (Pb) from aqueous medium. The effect of pH, adsorbent dose, metal ion concentration and adsorption time was determined. It was found that the optimum conditions for adsorption of lead (Pb) were pH 5, adsorbent dose of 0.4 g/L, Pb(II) ions concentration of 500 mg/L and adsorption time of 1 h. The adsorbent chemically modified SM was characterized by scanning electron microscopy (SEM), BET/BJH and thermo gravimetric analysis (TGA). The percent adsorption of Pb(II) onto chemically modified silica monolith particles was 98%. An isotherm study showed that the adsorption data of Pb(II) onto chemically modified SM was fully fitted with the Freundlich and Langmuir isotherm models. It was found from kinetic study that the adsorption of Pb(II) followed a pseudo second-order model. Moreover, thermodynamic study suggests that the adsorption of Pb(II) is spontaneous and exothermic. The adsorption capacity of chemically modified SM for Pb(II) ions was 792 mg/g which is quite high as compared to the traditional adsorbents. The adsorbent chemically modified SM was regenerated, used again three times for the adsorption of Pb(II) ions and it was found that the adsorption capacity of the regenerated adsorbent was only dropped by 7%. Due to high adsorption capacity chemically modified silica monolith particles could be used as an effective adsorbent for the removal of heavy metals from wastewater.     

A Highly Efficient Chelating Polymer for the Adsorption of Uranyl and Vanadyl Ions at Low Concentrations

A new polymer containing double amidoxime groups per repeating unit was synthesized to enhance the metal ion uptake capacity. The adsorption properties of this new polymeric adsorbent, amidoximated poly(N,N-dipropionitrile acrylamide), for U(VI), V(V), Cu(II), Co(II) and Ni(II) ions were investigated by batch and flow-through processes at very low concentration levels (ppb). The chelating polymer showed high adsorption capacity for uranyl as well as vanadyl ions. In selectivity studies from a mixture of metal ions in aqueous solutions, the adsorbent showed high selectivity for uranyl and vanadyl ions in the following order: U(VI) > V(V) Co(II) = Cu(II) Ni(II) as determined by calculating the distribution coefficients D, of corresponding ions. The adsorption of uranyl and vanadyl ions from natural seawater by the new adsorbent was also examined in flow through mode.