青铜器文物腐蚀受损原因的研究

以三千多年前商周时代为代表的青铜器是我国金属质地文物中的珍品。本文调查了青铜病的发现‘症状’,对青铜病形成的过程和原因,以小孔腐蚀原理研究了溶液的ＰＨ值和Ｃｌ＾－浓度对青铜腐蚀的影响,进行了模拟闭塞电池内化学和电 化学状态的研究,提出出青铜病的产生机理并探讨符合文物保护要求的青铜器保护处理方法。     

Barrier Properties OF Inorganic-Organic Polymers: Influence of Starting Compounds,Curing Conditions and Storage-Scaling-Up to Industrial Application—

With a new kind of barrier coating material, namely inorganic-organic polymers, it is possible to obtain high-barrier properties for oxygen, water vapor, and flavor permeation. These hybrid polymers can be synthesized by the sol-gel technique. Network forming reactions and degrees of condensation in the coating sols as well as in the cured coating materials were characterized using ²⁹Si, ¹³C-NMR and FT-Raman spectroscopy. The oxygen barrier properties of the hybrid polymers were found to be strongly influenced by the inorganic and also by the organic network density. In order to scale-up the excellent laboratory results to pilot plant and production dimensions additional efforts were necessary. For optimization of the barrier coating compositions the influence of the starting compounds on the resulting barrier properties had to be investigated. A constant quality of the coating sols during the industrial processing had to be guaranteed so as to obtain reproducible barrier properties. The influence of storage conditions on chemical reactions in the coating sols, indicated by changes of viscosity, was investigated. Since the curing times of the laboratory system were not transferable to the high speed of the production roll coating process more effective curing methods had to be found. The influence of the storage time of the cured coating materials on the oxygen barrier properties was investigated. Even by storing at ambient temperature further improvement of the oxygen barrier properties was obtained. Only by optimizing all of the above mentioned parameters can the excellent barrier properties result in marketable products.     

Effect of P/Si polymeric silsesquioxane and the monomer compound on thermal properties of epoxy nanocomposite

The unique polymeric silsesquioxane/4,4′-diglycidyether bisphenol A (DGEBA) epoxy nanocomposites have been prepared by sol-gel method. The structure of nanocomposites was characterized by attenuated total reflectance (ATR) and solid state ²⁹Si NMR. The characteristic intensity of trisubstituted (T) structure was higher than that of tetrasubstituted (Q) structure from solid state ²⁹Si NMR spectra of 3-isocyanatopropyltriethoxysilane (IPTS) modified epoxy. The activation energies of curing reaction of epoxy system and IPTS modified epoxy system are 28-66 kJ/mol and 57-75 kJ/mol, respectively, by Ozawa’s and Kissinger’s methods. The triethyoxysilane side chain of IPTS modified epoxy might interfere the curing reaction of epoxy/amine and increase the activation energy of curing. The thermal degradation of nanocomposites was investigated by Thermogravimetric analysis (TGA). The char yield of nanocomposites was proportional to the 2-(diphenylphosphino)ethyltriethoxysilane (DPPETES) moiety content at high temperature. A higher char content could inhibit thermal decomposition dramatically and enhance the thermal stability. Moreover, the nanocomposites possess high optical transparency.     

A copper ion-selective electrode with high selectivity prepared by sol-gel and coated wire techniques

A sol-gel electrode and a coated wire ion-selective poly(vinyl chloride) membrane, based on thiosemicarbazone as a neutral carrier, were successfully developed for the detection of Cu (II) in aqueous solutions. The sol-gel electrode and coated electrode exhibited linear response with Nernstian slopes of 29.2 and 28.1 mV per decade respectively, within the copper ion concentration ranges 1.0×10^–5–1.0×10^–1 M and 6.0×10^–6–1.0×10^–1 M for coated and sol-gel sensors. The coated and sol-gel electrodes show detection limits of 3.0×10^–6 and 6.0×10^–6 M respectively. The electrodes exhibited good selectivities for a number of alkali, alkaline earth, transition and heavy metal ions. The proposed electrodes have response times ranging from 10–50 s to achieve a 95% steady potential for Cu²⁺ concentration. The electrodes are suitable for use in aqueous solutions over a wide pH range (4–7.5). Applications of these electrodes for the determination of copper in real samples, and as an indicator electrode for potentiometric titration of Cu²⁺ ion using EDTA, are reported. The lifetimes of the electrodes were tested over a period of six months to investigate their stability. No significant change in the performance of the sol-gel electrode was observed over this period, but after two months the coated wire copper-selective electrode exhibited a gradual decrease in the slope. The selectivity of the sol-gel electrode was found to be better than that of the coated wire copper-selective electrode. Based on these results, a novel sol-gel copper-selective electrode is proposed for the determination of copper, and applied to real sample assays.     

Organic sol-gel materials for second-order nonlinear optics based on melamines

A series of all organic nonlinear optical (NLO) sol-gel materials based on melamines and an azobenzene dye (Disperse Orange 3; DO3) have been investigated. Different contents of DO3 were covalently bonded with the melamine-based organic network via condensation of amino and methylol groups. The optically clear samples exhibited second-order optical nonlinearity (second-harmonic coefficient d₃₃) = 35.4 and 11.5 pm/V at 1064 and 1542 nm, respectively) after poling and curing at 220°C for 1 h. Thermal behavior of these organic NLO sol-gel systems was studied by temperature-dependent dielectric relaxation. The results indicate that the incorporation of rigid NLO-active chromophore into the melamine-based matrix leads to high rigidity and dense packing of the organic network. Subsequently, higher glass transition temperatures were obtained for the organic NLO sol-gel material with higher DO3 content. The influence of composition on the temporal stability at 100°C was also investigated. Temporal stability at 100°C was studied as a function of system composition. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2503–2510, 1999     

Barium Sodium Niobate Powders and Thin Films: Preparation and Ferroelectric Behavior

Powders and thin films of barium sodium niobate, Ba₄Na₂Nb₁₀O₃₀, of filled tungsten bronze type ferroelectric were processed by a sol-gel route using barium metal, niobium ethoxide and sodium methoxide as precursors. Polycrystalline powder resulted after heat treating the gel powder at or above 650°C. Thin films of Ba₄Na₂Nb₁₀O₃₀ showed no preferred orientation on Si(100), Pt/Si(100) and sapphire substrates. Hysteresis measurements at 1 kHz for the thin films annealed at 750°C, obtained using a prehydrolyzed precursor solution, and gave remanent polarization of 17.34 µC/cm² and coercive field of 62.5 kV/cm. Microstructural investigation of surface morphology of these films revealed grains about 0.3 µm in size. Prehydrolysis of the precursor solution was found to be necessary to achieve dense films with ferroelectric properties.     

Development of a Sol-Gel Procedure for Preparation of a Diglycidyloxycalix[4]arene Solid-Phase Microextraction Fiber with Enhanced Extraction Efficiency

5,11,17,23-Tetra-tert-butyl-25,27-dihydroxy-26,28-diglycidyloxycalix[4]arene (diglycidyloxy-C[4]) has been synthesized and used for preparation of a sol-gel solid-phase microextraction fiber with enhanced extraction efficiency. The sol-gel procedure was developed using a sol solution containing diglycidyloxy-C[4] as organic component and both tetraethoxysilane and 3-aminopropyltriethoxysilane (KH-550) as precursors. No additional catalysts were used and no centrifugation was performed. Diglycidyloxy-C[4] was highly chemically reactive toward KH-550 even at room temperature, which increased the calixarene content of the coating, simplified the sol-gel procedure, reduced the sol-gel reaction time, enhanced the polarity of the coating, and improved extraction performance. The sol-gel mixture also had very good coating properties and was highly uniformly distributed on the surface of the fiber; because of these characteristics several fibers could be prepared from one sol-gel solution. Efficient extraction of trace analytes (µg L^?1 levels) from aqueous samples was accomplished using this kind of new fiber. Very low detection limits (ng L^?1 level) were achieved for most polar (aromatic amines and phenols) and nonpolar (polycyclic aromatic hydrocarbons) aromatic compounds by SPME followed by gas chromatography with flame ionization detection. The new coating had excellent solvent and thermal (350 °C) stability. Lifespan was also good—a fiber could be used more than 300 times in headspace SPME without substantial changes in the properties of the coating.     

Highly Stable Aqueous Zinc‐Ion Storage Using a Layered Calcium Vanadium Oxide Bronze Cathode

Cost‐effective aqueous rechargeable batteries are attractive alternatives to non‐aqueous cells for stationary grid energy storage. Among different aqueous cells, zinc‐ion batteries (ZIBs), based on Zn²⁺ intercalation chemistry, stand out as they can employ high‐capacity Zn metal as the anode material. Herein, we report a layered calcium vanadium oxide bronze as the cathode material for aqueous Zn batteries. For the storage of the Zn²⁺ ions in the aqueous electrolyte, we demonstrate that the calcium‐based bronze structure can deliver a high capacity of 340 mA h g^?1 at 0.2 C, good rate capability, and very long cycling life (96 % retention after 3000 cycles at 80 C). Further, we investigate the Zn²⁺ storage mechanism, and the corresponding electrochemical kinetics in this bronze cathode. Finally, we show that our Zn cell delivers an energy density of 267 W h kg^?1 at a power density of 53.4 W kg^?1.     

Fabrication and Characterization of Sol-Gel Derived Potassium Sodium Strontium Barium Niobate

Potassium sodium strontium barium niobate (K_0.2Na_0.2Sr_0.48Ba_0.32Nb₂O₆, KNSBN) powder and thin films dip coated onto Si(100) substrates have been prepared by sol-gel route. The thermal evolution of these sol-gel derived KNSBN was studied by differential thermal analysis (DTA) and thermogravimetry (TG). Their structural changes at different annealing temperatures were examined by X-ray diffraction (XRD) and Raman spectroscopy. Our results suggest that the KNSBN tetragonal tungsten bronze (TTB) phase is formed via an intermediate orthorhombic phase. Pure TTB phase KNSBN was obtained at annealing temperatures of 1200°C and 600°C for powder and films respectively.     

A new silane precursor with reduced polymerization shrinkage

There is a growing interest in precursor molecules for the sol-gel process which allow the formation of inorganic-organic copolymers, the so-called ORMOCER^®s, with no or only low shrinkage. A new silane type, the spiro ortho ester silanes, which can be polymerized by a ring opening reaction has been developed in order to overcome problems associated with loss of precise dimension and poor cohesion or stresses in coatings or in bulk materials caused by shrinkage during the curing step. In this paper, the synthesis of the new reactive silane precursor, the incorporation into the sol-gel process and the ring-opening reaction that can be UV-induced, for instance, will be described. First investigations show that the last reaction step is accompanied by a volume change of only <0.30 vol. -%.     

Innovative chemically bonded ionic liquids-based sol-gel coatings as highly porous, stable and selective stationary phases for solid phase microextraction

In this work, two allyl-functionalised ionic liquids (ILs), 1-allyl-3-methylimidazolium hexafluorophosphate and 1-allyl-3-methylimidazolium bis(trifluoromethanesulphonyl)imide, were used as selective coating materials to prepare chemically bonded ILs-based organic-inorganic hybrid solid phase microextraction fibres. These fibres were prepared with the aid of γ-methacryloxypropyltrimethoxysilane as bridge using sol-gel method and free radical cross-linking technology. The underlying mechanisms of the sol-gel reaction were proposed, and the successful binding of these functional ILs to the sol-gel substrate was confirmed by Fourier transform infrared spectroscopy. These IL-based sol-gel coatings had porous surface structure, high thermal stability, a wide range of pH stability, strong solvent resistance and good coating preparation reproducibility. They also had high selectivity and sensitivity towards strong polar phenolic environmental estrogens (PEEs) and aromatic amines due to the strong electrostatic interactions, hydrogen bonding and π-π interactions provided by the special molecular structure of these imidazolium ILs. Moreover, their characteristics were somewhat different depending on the type of anions in the IL structure. The practical applicability of these IL-based sol-gel coatings was evaluated through the analysis of PEEs in two real water samples. The detection limits were quite low, varying from 0.0030 to 0.1248 μg L⁻¹. The linearity was very good in the range of 0.1 to 1000 μg L⁻¹ for most analytes, and the relative standard deviation values were below 6%. The relative recoveries were between 83.1 and 104.1% for lake water and between 89.1 and 97.1% for sewage drainage outlet water.     

Coating of Methyltriethoxysilane—Modified Colloidal Silica on Polymer Substrates for Abrasion Resistance

Organic-inorganic hybrid composites were prepared by the sol-gel method for the hard coating agent of transparent plastic, and their abrasion resistance, optical and surface characteristics were evaluated. Methyltriethoxy-silane (MTES) and colloidal silica were used as starting materials. The addition of MTES to colloidal silica enabled the formation of dense thin films with very smooth surface on the substrates. The thin films were strongly adhered to the substrates without primer treatment. The abrasion resistance increased with the increase in the ratio of MTES to the colloidal silica. Optimal amount of MTES for the hard coating agent was 100 wt% to the colloidal silica. The addition of curing catalyst, tetramethylammonium formate was found to be very effective to enhance the adhesion strength of coating agent to the substrates and reduced curing time.     

Effect of curing on the broadband dielectric spectroscopy of powder coating

The effect of curing process of thermosetting powder coating consists of carboxylated polyester resin cured with triglycidyl isocyanurate has been investigated using broadband dielectric relaxation spectroscopy over a wide range of frequency (10⁻¹-10⁶ Hz) and temperature (70-105 °C) for different constant curing times. The molecular dynamics of the glass relaxation process (α-process) was investigated as a function of curing time, frequency, and temperature. It has been found that, only one common α-relaxation process has been observed for all measured samples of different degree of curing stages, its dynamics and broadness were found to be curing time dependent. In addition, the curing time dependence of the dielectric relaxation strength, Δε, has also been examined for the α and β-relaxation processes. The Δε for the two relaxation processes decreased strongly at the beginning of curing process and then became almost constant at longer curing times. This finding implied that the numbers of reoriented dipoles decrease with curing time as a result of the formation of three-dimensional polymer network. Furthermore, the dislocation energy, ε_s, calculated from the Meander model was found to be increased with increasing the curing time, i.e. the formation of a three-dimensional polymer network produces many structural defects or dislocation points. In addition, the activation energy of the curing process was calculated from the analysis of the calorimetric exothermic peaks of the curing process at different heating rates.     

Preparation and properties of polybenzoxazole-silica nanocomposites via sol-gel process

A novel organic/inorganic hybrid material has been prepared through the sol-gel process. A high temperature polymer, polybenzoxazole (PBO), was chosen as the organic phase due to its inherent low dielectric constant and low water absorption. The inorganic phase was generated via sol-gel reaction from a silica precursor, phenyltriethoxysilane (PTEOS). Due to the hydroxyl groups in the PBO precursor backbone and the water release during the cyclization of the precursor, the sol-gel reaction proceeded without the addition of water and any catalyst. After curing at 350 °C, we obtained the PBO/silica nanocomposites. From TEM and SEM photographs, the silica particles dispersed in the PBO matrix were nano-sized. With an addition of 100 wt% of PTEOS, the T_g of PBO was increased 35 °C. The dielectric constant of the hybrid materials increased with the increasing amount of PTEOS.     

GdAlO_3:Er~(3+),Yb~(3+)荧光粉的制备与上转换发光性能

采用共沉淀、溶胶-凝胶和固相反应法制备了GdAlO3:Er3+,Yb3+荧光粉.借助X射线衍射、扫描电子显微镜、傅里叶变换红外光谱、N2-吸附、吸收光谱和荧光光谱等手段研究了不同方法制备的GdAlO3:Er3+,Yb3+荧光粉结构、形貌、表面基团和光吸收及上转换发光性能.结果表明:用共沉淀法比固相反应法和溶胶-凝胶法可以在更温和的条件下制得纯相GdAlO3:Er3+,Yb3+荧光粉,用共沉淀法和溶胶-凝胶法制备的GdAlO3:Er3+,Yb3+荧光粉颗粒都在纳米尺寸,溶胶-凝胶法制得的样品存在相对严重的颗粒团聚现象,而用固相反应法制备的荧光粉为微米级颗粒.GdAlO3:Er3+,Yb3+荧光粉在980 nm激发的上转换发射光谱包含波长为524和546 nm的绿光与659 nm的红光,且三种方法制备的样品绿光发射强度都显著高于红光.不同方法制备的荧光粉上转换发光强度和红光/绿光强度比相差较大,共沉淀法制备的样品上转换发光强度要显著高于固相法以及溶胶-凝胶法制备的样品,而溶胶-凝胶法制备的样品发光中红光/绿光相对强度比最高.红外光谱显示,不同方法制备的GdAlO3:Er3+,Yb3+荧光粉表面OH-、CO32-及CO2官能团含量不同,溶胶-凝胶法制备的样品要明显高些.基于红外光谱、不同Er3+和Yb3+离子掺杂浓度及不同激光功率上转换发光的结果,对Er3+和Yb3+之间的能量传递过程及不同方法制备荧光粉的上转换发光性能进行了讨论.     

Synthesis and Characterization of a Novel Curing Agent for Epoxy Resin Based on Phosphazene Derivatives

In this work, a novel amine-terminated curing agent for epoxy resin based on hexachlorocyclotriphosphazene (HCCP) was synthesized through two steps of nucleophilic substitution reactions by phenol and 4-aminophenol. Its chemical structure was characterized by ¹H-NMR, Fourier transform infrared spectroscopy (FTIR) and mass spectrometry (MS). This curing agent was liquid at room temperature which made it easy to disperse in the epoxy resin. The rheological test showed the viscosity of the pre-polymer fluid decreased as the proportion of the curing agent increased so it improved the process performance. The curing reaction was studied by differential scanning calorimeter (DSC). The novel curing agent had a wider range of curing temperature and relatively lower curing temperature in comparison with the widely-using curing agent 4,4′-Diaminodiphenylmethane (DDM). The wider range of curing temperature helped lower the heat accumulation which was an important factor in curing process.     

In Situ Formation of Particulate Silica in Natural Rubber Matrix by the Sol-Gel Reaction

The sol-gel reaction of tetraethoxysilane was conducted in natural rubber (NR) matrix to obtain NR/in situ silica mixtures. In other words, in situ filling of silica onto NR was conducted. The mixtures were compounded with curing regents, and their viscosities were evaluated. The in situ silica with a coupling agent afforded the lowest viscosity compared not only with a conventional silica (VN-3) but also with a carbon black (HAF). The curing behaviors were most favorable for in situ silica compound. Physical properties of the vulcanizates were also evaluated, and again in situ silica stock gave the best result.     

Matching Cure Characteristics of Automotive Rubber Compound and Polyurethane Coating

The present investigation focuses on matching cure characteristics of EPDM rubber compound and polyurethane (PU) coating using temperature modulated and pressure differential scanning calorimetry (TMDSC, PDSC). TMDSC provides a detailed and better understanding of the curing process of model rubber system as well as complex automotive rubber compounds. The low level of unsaturation present in EPDM, results in the small heat of vulcanization (2–5 J g^–1), which is difficult to accurately measure using conventional differential scanning calorimetry (DSC). Thus, curing of highly filled EPDM compound was investigated using TMDSC. The kinetics of PU curing was monitored using pressure DSC (PDSC), and heat of curing was determined as 4.2 J g^–1 at 10°C min^–1 heating rate. It is found that complex automotive compounds and the PU coating are curing simultaneously. This revised version was published online in July 2006 with corrections to the Cover Date.     

Sol-gel-based optical sensor for the detection of aqueous amines

We present an optical sensor for the detection of aqueous amines obtained by incorporating chromoionophore XV (ETH^T 4001) into sol-gel thin films. Acid- and base-catalyzed sol-gel processes were studied to prepare stable ormosil layers using various amounts of organically modified sol-gel precursor such as methyltriethoxysilane (MTriEOS). The sensor layers were coated with a protective layer of microporous white polytetrafluoroethylene (PTFE) in order to prevent interference from ions and ambient light. The measurements were carried out in a flow-through cell in the reflection mode. Acid-catalyzed ormosil layers (pH 1) based on the copolymerization of tetraethoxysilane (TEOS) and MTriEOS did not show any change in signal upon exposure to aqueous amine solutions, while base-catalyzed sensor layers (pH 3 and 13) showed significant changes in signal. The response time (t ₁₀₀) for the base-catalyzed sensor layer L3 (pH 13) upon exposure to different solutions containing 0–608 mmol L⁻¹ aqueous propylamine was 20–30 s, the regeneration time was 70 s and the detection limit was 0.1 mmol L⁻¹. The sensor response was reproducible and reversible. The porous ormosil layers permit dry sensor storage conditions.     

Curing of urea-formaldehyde resins on awood substrate

TG-DTA analysis method was used to study the curing behaviour of urea-formaldehyde (UF) adhesive resins in the presence of a wood substrate. The cure process was followed using a Setaram labsys^TM instrument in flowing nitrogen atmosphere by varying the ratio of resin and wood. Resin cure was catalysed with 2% of NH₄Cl. Curing tests were performed in the open standard platinum crucibles and in the sealed glass capsules. To characterise the reactivity of curing system, the peak temperatures in DTA curve and the mass loss values in TG curve were taken as the apparent indices. The main attention was paid to phenomena which actually take place in curing of UF resins during manufacturing of particleboards. Reactivity of the curing system depends mostly on methylol content of resin and can be adequetly evaluated by the maximum temperature of exothermic peak. The wood substrate has a substantial influence on the resin and water diffusion in system causing the changes in water/resin separation and water evaporation conditions. The water movement in curing adhesive joint was a confusing parameter in determining the peak positions. The rate of mass loss on a wood substrate is higher as compared to curing UF resin alone.