Physical properties of organic particulate UV-absorbers used in sunscreens. I. Determination of particle size with fiber-optic quasi-elastic light scattering (FOQELS), disc centrifugation, and laser diffractometry

In this study microparticles consisting of a benzotriazole derivative, which are used as absorbers for UV radiation in cosmetic sunscreens, were investigated. The particles were micronized in presence of a dispersing agent by means of a ball milling process. According to the energy input different particle sizes were produced in the range of 0.16 to 4 microm. The particle sizes obtained after different stages of the micronization process were measured using fiber-optic quasi-elastic light scattering (FOQELS), disc centrifugation, and laser diffractometry. All methods showed satisfactory agreement over the whole range of sizes. With the FOQELS technique the particle size distribution could be resolved to sizes well below 0.1 microm.     

Experimental investigation of nanoparticle dispersion by beads milling with centrifugal bead separation

A new type of beads mill for dispersing nanoparticles into liquids has been developed. The bead mill utilizes centrifugation to separate beads from nanoparticle suspensions and allows for the use of small sized beads (i.e. 15-30 microm in diameter). The performance of the beads mill in dispersing a suspension of titanium dioxide nanoparticle with 15 nm primary particles was evaluated experimentally. Dynamic light scattering was used to measure titania particle size distributions over time during the milling process, and bead sizes in the 15-100 microm range were used. It was found that larger beads (50-100 microm) were not capable of fully dispersing nanoparticles, and particles reagglomerated after long milling times. Smaller beads (15-30 microm) were capable of dispersing nanoparticles, and a sharp peak around 15 nm in the titania size distribution was visible when smaller beads were used. Because nanoparticle collisions with smaller beads have lower impact energy, it was found by X-ray diffraction and transmission electron microscopy that changes in nanoparticle crystallinity and morphology are minimized when smaller beads are used. Furthermore, inductively-coupled plasma spectroscopy was used to determine the level of bead contamination in the nanoparticle suspension during milling, and it was found that smaller beads are less likely to fragment and contaminate nanoparticle suspensions. The new type of beads mill is capable of effectively dispersing nanoparticle suspensions and will be extremely useful in future nanoparticle research.     

Separation and detection of individual submicron particles by capillary electrophoresis with laser-light-scattering detection

Separation and detection of individual submicron polystyrene spheres using capillary electrophoresis with laser-light-scattering detection has been demonstrated. Electrophoretically separated particles were passed through a focused laser beam and light scattered from individual particles was collected at 90 degrees. Each diameter of polystyrene spheres injected (from 110 to 992 nm) resulted in the observation of a well-defined migration window containing multiple peaks, each arising from the light scattered by an individual particle. The migration time window for individual particles of a particular size corresponded well to the migration time of a peak from a population of particles of the same size detected using a UV absorbance detector. The electrophoretic mobility and scattered light intensity were determined for each particle detected. The average scattered light intensity for each particle size was consistent with Mie scattering theory. Particles as small as 110 nm in diameter were detected individually using this method, but particles with a diameter of 57 nm could not be individually detected. The number of single particle scattering events was counted and compared to the theoretical number of particles injected electrokinetically, and the detection efficiency determined ranged from 38 to 57% for polystyrene spheres of different sizes. The laser-light-scattering detection method was directly compared to laser-induced fluorescence detection using fluorescent polystyrene microspheres. The number of particles detected individually by each method was in agreement.     

Design and Synthesis of Transparent Poly （acrylonitrile-butadiene-styrene） and Relationship Between Its Phase Construction and Transparency

IntroductionABS resins have been widely applied to the field ofengineering materials because of their excellent me-chanical,electrical,physical,and chemical proper-ties.Typically,ABS resins comprise a rigid copolymermatrix-phase dispersed in a graft copol…     

Optical parameter dependence of fluorescence correlation spectrometry without using magnification tools.

The performance of fluorescence correlation spectrometry (FCS) was examined for studying the solutions suspended with the fluorescent particles of various sizes from 50 nm to 10 microm in diameter and for different sizes of pinholes: the particles were made to move by simply stirring the solution in the quartz fluorescence cuvette. Without using any magnification tool for the optical image, this FCS system successfully distinguishes images with a size of smaller than 1 microm. This system was applied for determination of the sizes of microalgae.     

The effect of particle size on hydrolysis reaction rates and rheological properties in cellulosic slurries

The effect of varying initial particle sizes on enzymatic hydrolysis rates and rheological properties of sawdust slurries is investigated. Slurries with four particle size ranges (33 microm < x < or = 75 microm, 150 microm < x < or = 180 microm, 295 microm < x < or = 425 microm, and 590 microm < x < or = 850 microm) were subjected to enzymatic hydrolysis using an enzyme dosage of 15 filter paper units per gram of cellulose at 50 degrees C and 250 rpm in shaker flasks. At lower initial particle sizes, higher enzymatic reaction rates and conversions of cellulose to glucose were observed. After 72 h 50 and 55% more glucose was produced from the smallest size particles than the largest size ones, for initial solids concentration of 10 and 13% (w/w), respectively. The effect of initial particle size on viscosity over a range of shear was also investigated. For equivalent initial solids concentration, smaller particle sizes result in lower viscosities such that at a concentration of 10% (w/w), the viscosity decreased from 3000 cP for 150 microm < x < or = 180 microm particle size slurries to 61.4 cP for 33 microm < x < or = 75 microm particle size slurries. Results indicate particle size reduction may provide a means for reducing the long residence time required for the enzymatic hydrolysis step in the conversion of biomass to ethanol. Furthermore, the corresponding reduction in viscosity may allow for higher solids loading and reduced reactor sizes during large-scale processing.     

Effects of Co-Solvent Nature and Acid Concentration in the Size and Morphology of Wrinkled Mesoporous Silica Nanoparticles for Drug Delivery Applications

Hierarchically porous materials, such as wrinkled mesoporous silica (WMS), have gained interest in the last couple of decades, because of their wide range of applications in fields such as nanomedicine, energy, and catalysis. The mechanism of formation of these nanostructures is not fully understood, despite various groups reporting very comprehensive studies. Furthermore, achieving particle diameters of 100 nm or less has proven difficult. In this study, the effects on particle size, pore size, and particle morphology of several co-solvents were evaluated. Additionally, varying concentrations of acid during synthesis affected the particle sizes, yielding particles smaller than 100 nm. The morphology and physical properties of the nanoparticles were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and dynamic light scattering (DLS). Homogeneous and spherical WMS, with the desired radial wrinkle morphology and particle sizes smaller than 100 nm, were obtained. The effect of the nature of the co-solvents and the concentration of acid are explained within the frame of previously reported mechanisms of formation, to further elucidate this intricate process.     

Crystal structure and the paraelectric-to-ferroelectric phase transition of nanoscale BaTiO3

We have investigated the paraelectric-to-ferroelectric phase transition of various sizes of nanocrystalline barium titanate (BaTiO3) by using temperature-dependent Raman spectroscopy and powder X-ray diffraction (XRD). Synchrotron X-ray scattering has been used to elucidate the room temperature structures of particles of different sizes by using both Rietveld refinement and pair distribution function (PDF) analysis. We observe the ferroelectric tetragonal phase even for the smallest particles at 26 nm. By using temperature-dependent Raman spectroscopy and XRD, we find that the phase transition is diffuse in temperature for the smaller particles, in contrast to the sharp transition that is found for the bulk sample. However, the actual transition temperature is almost unchanged. Rietveld and PDF analyses suggest increased distortions with decreasing particle size, albeit in conjunction with a tendency to a cubic average structure. These results suggest that although structural distortions are robust to changes in particle size, what is affected is the coherency of the distortions, which is decreased in the smaller particles.     

High-pressure liquid dispersion and fragmentation of flame-made silica agglomerates

The influence of primary particle diameter and the degree of agglomeration of flame-made silica agglomerate suspensions in aqueous solutions is studied by high-pressure dispersion (up to 1500 bar) through a nozzle with a 125 microm inner diameter. These particles were produced (4-15 g/h) by oxidation of hexamethyldisiloxane (HMDSO) in a coflow diffusion flame reactor. Their average primary particle size (10-50 nm) and degree of agglomeration were controlled by varying the oxygen and precursor flow rates. The particles were characterized by nitrogen adsorption, electron microscopy, and small-angle X-ray scattering. Hydrodynamic stresses break up soft agglomerates and yield hard agglomerate sizes in the range of 100-180 nm, as characterized by dynamic light scattering. Soft agglomerates exhibited decreasing light scattering diameters with increasing dispersion pressure, while hard agglomerates were insensitive.     

Particle formation by infrared laser ablation of glycerol: implications for ion formation

The quantity and size distribution of micrometer-sized particles ejected from thin films of glycerol were measured using light scattering particle sizing. Thin glycerol films were irradiated at atmospheric pressure with an infrared optical parametric oscillator at wavelengths between 2.95 and 3.1 microm. Particulate material resulting from the ablation was sampled directly into a particle-sizing instrument and particles with diameters greater than 500 nm were detected and sized by light scattering. The fluence threshold for particle formation was between 2000 and 3000 J/m2 for all laser wavelengths. At threshold, fewer than 100 particles/cm3 were detected and this value increased to several thousand particles/cm3 at twice the threshold fluence. The average size of the coarse particles ranged from 900 nm to 1.6 microm at threshold and decreased by 10-20% at twice the threshold fluence. The coarse particle formation observations were compared with ion formation behavior in matrix-assisted laser desorption ionization and interpreted in terms of a photomechanical mechanism for material ablation and ion formation.     

On the measurement of gold nanoparticle sizes by the dynamic light scattering method

The application of the dynamic light scattering (DLS) method for determining the size distribution of colloidal gold nanoparticles in a range of 1–100 nm is discussed. It is shown that rotational diffusion of nonspherical strongly scattering particles with sizes of larger than 30–40 nm results in the appearance of a false peak in a size range of about 5–10 nm. In this case, the uncritical application of the DLS method may yield particle volume or number size distributions different from those obtained by transmission electron microscopy. For weakly scattering particles with diameters of smaller that 20 nm, the DLS method demonstrates an additional peak of intensity distribution in the region of large sizes that is related to particle aggregates or byproduct particles rather than individual nanoparticles. Practical methods for solving the problem of false peaks are discussed. It is established that the width of the DLS distribution does not correspond to transmission electron microscopy data and is overestimated. The advantages and drawbacks of the methods are compared and it is noted that, at present, the DLS method is the only instrument suitable for nonperturbative and sensitive diagnostics of relatively slow aggregation processes with characteristic times on the order of 1 min. In particular, this method can be used to diagnose gold nanoparticle conjugate aggregation initiated by biospecific interactions on their surface.     

Particle size analyses of porous silica and hybrid silica chromatographic support particles. Comparison of flow/hyperlayer field-flow fractionation with scanning electron microscopy, electrical sensing zone, and static light scattering

Porous silica and hybrid silica chromatographic support particles having particle diameters ranging approximately from 1 microm to 15 microm have been characterized by flow/hyperlayer field-flow fractionation (FFF). The particle size accuracy has been improved significantly in this work by a second-order polynomial calibration. Very good agreement between the FFF data and scanning electron microscopic (SEM) results has been achieved. The effects of particle porosity, pore sizes, and particle sizes on the particle size accuracy in electrical sensing zone (ESZ) analyses have been discussed. It has been demonstrated by computer simulation and experimental measurements that false peaks can be generated in certain particle size regions when the static light scattering (SLS) technique is applied to tightly distributed spherical chromatographic support particles.     

Calculated absorption and scattering properties of gold nanoparticles of different size, shape, and composition: applications in biological imaging and biomedicine

The selection of nanoparticles for achieving efficient contrast for biological and cell imaging applications, as well as for photothermal therapeutic applications, is based on the optical properties of the nanoparticles. We use Mie theory and discrete dipole approximation method to calculate absorption and scattering efficiencies and optical resonance wavelengths for three commonly used classes of nanoparticles: gold nanospheres, silica-gold nanoshells, and gold nanorods. The calculated spectra clearly reflect the well-known dependence of nanoparticle optical properties viz. the resonance wavelength, the extinction cross-section, and the ratio of scattering to absorption, on the nanoparticle dimensions. A systematic quantitative study of the various trends is presented. By increasing the size of gold nanospheres from 20 to 80 nm, the magnitude of extinction as well as the relative contribution of scattering to the extinction rapidly increases. Gold nanospheres in the size range commonly employed ( approximately 40 nm) show an absorption cross-section 5 orders higher than conventional absorbing dyes, while the magnitude of light scattering by 80-nm gold nanospheres is 5 orders higher than the light emission from strongly fluorescing dyes. The variation in the plasmon wavelength maximum of nanospheres, i.e., from approximately 520 to 550 nm, is however too limited to be useful for in vivo applications. Gold nanoshells are found to have optical cross-sections comparable to and even higher than the nanospheres. Additionally, their optical resonances lie favorably in the near-infrared region. The resonance wavelength can be rapidly increased by either increasing the total nanoshell size or increasing the ratio of the core-to-shell radius. The total extinction of nanoshells shows a linear dependence on their total size, however, it is independent of the core/shell radius ratio. The relative scattering contribution to the extinction can be rapidly increased by increasing the nanoshell size or decreasing the ratio of the core/shell radius. Gold nanorods show optical cross-sections comparable to nanospheres and nanoshells, however, at much smaller effective size. Their optical resonance can be linearly tuned across the near-infrared region by changing either the effective size or the aspect ratio of the nanorods. The total extinction as well as the relative scattering contribution increases rapidly with the effective size, however, they are independent of the aspect ratio. To compare the effectiveness of nanoparticles of different sizes for real biomedical applications, size-normalized optical cross-sections or per micron coefficients are calculated. Gold nanorods show per micron absorption and scattering coefficients that are an order of magnitude higher than those for nanoshells and nanospheres. While nanorods with a higher aspect ratio along with a smaller effective radius are the best photoabsorbing nanoparticles, the highest scattering contrast for imaging applications is obtained from nanorods of high aspect ratio with a larger effective radius.     

Extinction coefficients of gold nanoparticles and their dimers. Dependence of optical factor on particle size

The generalized Mie theory has been employed to calculate extinction coefficients κ for isolated gold nanoparticles of different sizes (4–80 nm) and their dimers (κ₂) at the maximum of the short-wave plasmon resonance band. It has been found that the value of κ₂ essentially depends on both interparticle distance s and particle sizes R. According to the character of variations in the κ₂(s) dependence, three ranges of the distances are distinguished, i.e., large, intermediate, and small. In the first range, the κ₂ values slightly differ from doubled κ values. Nevertheless a tendency toward an increase in κ₂ is distinctly seen as the particles approach each other, and, within some range of s values and for particles with radii R < 15 nm, κ₂ is higher than 2κ. For dimers of larger particles, κ₂ < 2κ, with its value gradually decreasing with a reduction in the s value. The behavior changes when the particle sizes are of about 50 nm. In the range of small interparticle distances, κ₂ values slightly vary with the distance between the particles somewhat decreasing or oscillating with a small amplitude about some mean value. In this range, as the sizes of the gold particles grow, the extinction coefficients of dimers increasingly deviate from the sum of the extinction coefficients of the particles composing the dimers. For 20–80 nm nanoparticles, the size-dependence plotted for the extinction efficiency of dimers in logarithmic coordinates within the range of small interparticle distances is described by a straight line, the slope of which (1.036 ± 0.039) appears to be somewhat smaller than the slope of a corresponding line for individual gold particles (1.274 ± 0.014). The ratio between κ₂ and κ predetermines the character of variations in the optical factor as depending on the particle size and the interparticle distance and governs the behavior of the sol turbidity at the stage of nanoparticle dimerization.     

Size control synthesis of sulfur doped titanium dioxide （anatase） nanoparticles, its optical property and its photo catalytic reactivity for CO2 ＋ H2O conversion and phenol degradation

Sulfur doped anatase TiO2 nanoparticles (3 nm−12 nm) were synthesized by the reaction of titanium tetrachloride, water and sulfuric acid with addition of 3M NaOH at room temperature. The electro-optical and photocatalytic properties of the synthesized sulfur doped TiO2 nanoparticles were studied along with Degussa commercial TiO2 particles (24 nm). The results show that band gap of TiO2 particles decreases from 3.31 to 3.25 eV and for that of commercial TiO2 to 3.2 eV when the particle sizes increased from 3 nm to 12 nm with increase in sulfur doping. The results of the photocatalytic activity under UV and sun radiation show maximum phenol conversion at the particle size of 4 nm at 4.80% S-doping. Similar results are obtained using UV energy for both phenol conversion and conversion of CO2+H2O in which formation of methanol, ethanol and proponal is observed. Production of methanol is also achieved on samples with a particle size of 8 and 12 nm and sulfur doping of 4.80% and 5.26%. For TiO2 particle of 4 nm without S doping, the production of methanol, ethanol and proponal was lower as compared to the S-doped particles. This is attributed to the combined electronic effect and band gap change, S dopant, specific surface area and the light source used.     

Preparation of alumina stabilized aqueous Pd colloid by reduction using gamma-radiolysis, UV-photolysis and H2

The techniques of gamma-radiolysis, UV photolysis and hydrogen-induced reduction of aqueous palladium perchlorate to ultrafine particles of Pd, in the presence of alumina sol, have been studied. As compared to H₂-induced reduction, both UV photolytic and gamma-radiolytic reduction methods lead to a very stable, brown colored Pd colloid with relatively less absorption in the higher wavelength region and possessing much smaller volume average particle size (62 and 61 nm, respectively). Higher concentration of alumina sol and increase in pH from 1.8 to 7.2, favour the formation of smaller sized particles as determined by the dynamic light scattering technique.     

Cavity ring-down spectroscopy measurements of single aerosol particle extinction. I. The effect of position of a particle within the laser beam on extinction

A continuous wave distributed feedback diode laser operating in the near infrared at wavelengths close to 1650 nm has been used to measure the extinction of light by single aerosol particles. The technique of optical feedback cavity ring-down spectroscopy (CRDS) was used for measurement of CRDS events at a repetition rate of 1.25 kHz. This very high repetition rate enabled multiple measurements of the extinction of light by single aerosol particles for the first time and demonstrated the dependence of light scattering on the position of a particle within the laser beam. A model is proposed to explain quantitatively this phenomenon. The minimum detectable dimensionless extinction coefficient epsilonmin was determined to be 3x10(-6). Extinction values obtained for single spherical polymer beads from a monodisperse sample of particles of diameter of 4 microm are in near-quantitative agreement with the values calculated by the Mie scattering theory. The deviations from the Mie theory expected for measurement of extinction by CRDS using a continuous wave laser are discussed in the companion paper.     

Measurements of extinction by aerosol particles in the near-infrared using continuous wave cavity ring-down spectroscopy

Cavity ring-down spectroscopy using a fiber-coupled continuous wave distributed feedback laser at a wavelength of 1520 nm has been used to measure extinction of light by samples of nearly monodisperse aerosol particles <1 μm in diameter. A model is tested for the analysis of the sample extinction that is based on the Poisson statistics of the number of particles within the intracavity laser beam: variances of measured extinction are used to derive values of the scattering cross section for size-selected aerosol particles, without need for knowledge of the particle number density or sample length. Experimental parameters that influence the performance of the CRD system and the application and limitations of the statistical model are examined in detail. Determinations are reported of the scattering cross sections for polystyrene spheres (PSSs), sodium chloride, and ammonium sulfate, and, for particles greater than 500 nm in diameter, are shown to be in agreement with the corresponding values calculated using Mie theory or Discrete Dipole Approximation methods. For smaller particles, the experimentally derived values of the scattering cross section are larger than the theoretical predictions, and transmission of a small fraction of larger particles into the cavity is argued to be responsible for this discrepancy. The effects of cubic structure on the determination of optical extinction efficiencies of sodium chloride aerosol particles are examined. Values are reported for the real components of the refractive indices at 1520 nm of PSS, sodium chloride, and ammonium sulfate aerosol particles.     

Assessing the effect of latex particle size and distribution on the rheological and adhesive properties of model waterborne acrylic pressure-sensitive adhesives films

The adhesive and rheological properties of model acrylic pressure-sensitive adhesive (PSA) films prepared from high solid emulsions with different particle sizes and distributions have been investigated with a customized probe tack apparatus. For each emulsion, the monomer composition and gel content were kept constant but different average particle sizes and distributions were used. Adhesive films 100 microm thick were then prepared from these emulsions and their rheological properties in the linear regime and adhesive properties were systematically characterized. Surprisingly, both the rheological and adhesive properties were found to be very dependent on the initial latex particle size distribution. A series of experiments were carried out to assess the adhesive properties of films made from blends of small- and large-particle-size latexes. Using the probe tack test, a maximum in adhesion energy of the dry films was found for 60% of small particles in the blend, a composition clearly different from that giving a minimum viscosity of the latex implying that optimizing for properties may not be equivalent to optimizing for processing in these adhesive applications. Finally, the adhesive properties of two multimodal latexes with different particle size distributions were investigated. Both gave significantly higher adhesion energies and clear evidence of a fibrillar detachment process. This important result suggests that the spatial distribution of gel domains in the dry film and the molecular connectivity between those gel domains also play an important role in controlling its adhesive properties.     

Confined plasmons in nanofabricated single silver particle pairs: experimental observations of strong interparticle interactions

We report on the optical properties of single isolated silver nanodisks and pairs of disks fabricated by electron beam lithography. By systematically varying the disk size and surface separation and recording elastic scattering spectra in different polarization configurations, we found evidence for extremely strong interparticle interactions. The dipolar surface plasmon resonance for polarization parallel to the dimer axis exhibited a red shift as the interdimer separation was decreased; as expected from previous work, an extremely strong shift was observed. The scattering spectra of single particles and pairs separated by more than one particle radius can be well described by the coupled dipole approximation (CDA), where the particles are approximated as point dipoles using a modified dipole polarizability for oblate spheroids. For smaller particle separations (d < 20 nm), the simple dipole model severely underestimates the particle interaction, indicating the importance of multipolar fields and finite-size effects. The discrete dipole approximation (DDA), which is a finite-element method, describes the experimental results well even at d < 20 nm, including particles that have metallic bridges.