Oxygen Sensors Based on a Quenching of Tris-(4,7-diphenyl-1,10-phenanthroline)ruthenium(II) in Fluorinated Polymers

Luminescence quenching of Ru(II) complexes by oxygen has proved a powerful method of quantitative oxygen analysis. It has become clear that the polymer support for the sensor molecule plays a pivotal role in the sensor performance. The current work is devoted to understanding how the physical and photophysical properties of a sensor respond to changes in polymer composition. An oxygen quenching study was conducted on [Ru(Ph₂phen)₃]Cl₂(Ph₂phen=4,7-diphenyl-1,10-phenanthroline), in copolymer supports consisting of GP-163 (a polydimethylsiloxane (PDMS) with varying amounts of pendant acrylate groups) combined with a number of alkyl methacrylates with long chain alkyl or fluorinated alkyl esters. Increasing the chain length or the degree of fluorination on the hydrocarbon chains enhances performance. However, there is an optimal chain length for the fluorinated hydrocarbons for sensitivity, linearity, and physical properties. Too long a chain yields reduced quenching sensitivity and yields cloudy polymers. All systems showed some degree of heterogeneity as indicated by nonlinear Stern-Volmer quenching plots, but their intensity quenching data could be successfully fit with a two-site model.     

Assemblies, characterization, and luminescent enhancement of organized molecular films based on rare earth complexes

Langmuir-Blodgett (LB) films of different molar percentages of Eu(TTA)₃Phen (TTA=2-thenoyltrifluoroacetone; Phen=1,10-phenanthroline) with Gd(TTA)₃Phen coexisting with arachidic acid (AA) (complexes:AA=1:l, in molar ratio) were fabricated and the luminescence enhancement of Eu(III) in the films was studied in this investigation. The monolayers and LB films were characterized by π-A isotherms, fluorescence microscopy, UV-vis spectroscopy and low-angle X-ray diffraction. High-quality LB films and strongly luminescent films were obtained. It was learned from the present study that an efficient intermolecular energy transfer occurred from Gd(TTA)₃Phen to Eu(TTA)₃Phen in the films, which resulted in the luminescence enhancement effect. According to the proposed model of the “active enhancement circle” the distance of energy transfer from Gd-, Tb-, La-, and Y-complex to Eu-complex were calculated to be 1.2, 1.2, 0.7 and 1.0 nm, respectively.     

Long-Lived Luminescent Re(I) Complexes Containing cis-Carbonyl and Bidentate Phosphine Ligands

Highly emissive Re(I) complexes, hydrophobic cis-Re(CO)₂(c-dppene)(dpphen) and water-soluble cis-Re(CO)₂(c-dppene)(SO₃-dpphen) with a negative charge, were synthesized [where c-dppene is cis-(bis(diphenylphosphino)ethylene, dpphen is 4,7-diphenyl-1,10-phenanthroline, and SO₃-dpphen is its disulfonate derivative]. These Re(I) complexes have significantly higher molar absorption in the 350- to 490-nm region compared to their tricarbonyl Re(I) counterparts and their emission spectra are similar to those of Ru(II) polypyridyl complexes. The luminescence lifetimes of these Re(I) complexes approach 10 s in the absence of oxygen in both aqueous and less polar solvents. The complexes have limiting anisotropy values exceeding 0.3. As both ligands, the diimine and the bidentate phosphine, can be modified by adding different substituents, it should be possible to make cis-Re(CO)₂(diimine)(P-P) derivatives which are capable of labeling biomacromolecules for biochemical and biophysical studies.     

A Double Isotopic Labelling Study of the Infrared Spectra of the Linkage Isomers [Pd(bipy)(SCN)2], [Pd(bipy)(NCS)2] and Related Complexes

Abstract

The IR spectra of the linkage isomers [Pd(bipy)(SCN)₂] and [Pd(bipy)(NCS)₂] have been determined in the C≡N stretching region (2200–2000 cm^?1) and below 500 cm^?1. The band shifts resulting from deuteration of the 2,2′-bipyridine (bipy) ring and ¹⁵NCS-labelling are shown to provide a ready means for distinguishing between the internal ligand modes, the μPd-N(bipy) and μPd-SCN/μPd-NCS vibrations. The assignment technique has been further extended to the complexes [Pt(bipy)(SCN)₂] and [Pd(phen)(SCN)₂] (phen = 1,10-phenanthroline). Finally, a comparison between the IR spectra of [Pd(bipy)(NCO)₂], [Pd(bipy)(NCS)₂] and [Pd(bipy)(SCN)₂] reveals that the frequencies μM-NCO, μM-NCS and μM-SCN decrease in the sequence NCO > NCS > SCN.     

Electrospinning preparation and photophysical properties of one-dimensional (1D) composite nanofibers doped with erbium(III) complexes

1D composite nanofibers of poly(vinylpyrrolidone) (PVP, M_W≈60,000) doped with three Er(III) complexes were prepared by electrospinning. They demonstrated strong near-infrared (NIR) photoluminescence (PL) at 1535 nm and ternary Er(TTA)₃Phen (denoted as Er2, where TTA=2-thenoyltrifluoroacetonate; Phen=1,10-phenanthroline) fibers (Er2/PVP) exhibited maximum PL intensity. The crystal structure of Er2 complex has been determined by X-ray diffraction measurements. Er2 doped in fibers exhibited better thermal stability of NIR PL than the pure Er2 complex. These luminescent composite fibers have potential application in optical amplifiers.     

Synthesis,Optical Investigation and Biological Properties of Europium(III) Complexes with 2-(4-Chlorophenyl)-1-(2-Hydroxy-4-Methoxyphenyl)Ethan-1-one and Ancillary Ligands

Synthesis and photoluminescence behaviour of six novel europium complexes with novel β-hydroxyketone ligand, 2-(4-chlorophenyl)-1-(2-hydroxy-4-methoxyphenyl)ethan-1-one (CHME) and 2,2′-bipyridine (bipy) or neocuproine (neo) or 1,10-phenanthroline (phen) or 5,6-dimethyl-1,10-phenanthroline (dmphen) or bathophenanthroline (bathophen) were reported in solid state. The free ligand CHME and europium complexes, Eu(CHME)₃.2H₂O [1] Eu(CHME)₃.bipy [2], Eu(CHME)₃.neo [3], Eu(CHME)₃.phen [4], Eu(CHME)₃.dmphen [5] and Eu(CHME)₃.bathophen [6]were characterized by elemental analysis, FT-IR and ¹H-NMR. The photoluminescence emission spectra exhibited four characteristic peaks arising from the ⁵D₀ → ⁷F_J (J = 1–4) transitions of the europium ion in the solid state on monitoring excitation at λ_ex = 395 nm. The luminescence decay curves of these europium complexes possess single exponential behaviour indicating the presence of a single luminescent species and having only one site symmetry in the complexes. The luminescence quantum efficiency (η) and the experimental intensity parameters, Ω ₂ and Ω ₄ of europium complexes have also been calculated on the basis of emission spectra and luminescence decay curves. In addition, the antimicrobial and antioxidant activities were also studied of the investigated complexes.     

Energy transfer from Eu(III) and Tb(III) complexes to dyes in their mixed nanostructures. I

The formation of nanostructures that consist of complexes of β-diketones with 1,10-phenanthroline and involve dyes of the polymethine, triphenylmethane, oxazine, and xanthene series is observed in aqueous solutions. It is found that nanostructures of complexes of Ln(III) ions and dyes are reliably observed at concentrations of Ln complexes from 0.5 to 5 μM and at dye concentrations above 5 nM. Nanostructures of complexes Eu(MBTA)₃phen, Eu(NTA)₃phen, Eu(PTA)₃phen, Tb(PTA)₃phen, Gd(MBTA)₃phen, and Lu(MBTA)₃phen with dyes are studied, where MBTA is n-methoxybenzoyltrifluoroacetone, NTA is naphthoyltrifluoroacetone, PTA is pivaloyltrifluoroacetone, and phen is 1,10-phenanthroline. It is shown that nanostructures formed can contain dye molecules not only inside a nanostructure of Ln complexes but also on its outer shell. It is proved that, at a dye concentration in the solution of the order of nanomole or higher, the formation of mixed nanostructures of Eu complexes and dyes whose S ₁ level is below the ⁵ D ₀ level of Eu(III) leads to the quenching of the luminescence of Eu(III) and gives rise to the sensitized luminescence of dyes. The energy transfer efficiency from Eu(III) ions to dye molecules is determined by the ability of these molecules to incorporate into nanostructures of Eu complexes. The effect of the formation of nanostructures on the shape and position of the spectra of luminescence and absorption of dyes is studied. Comparison of the sensitized luminescence intensities of Nile blue in structures of Eu, Lu, and Gd complexes shows that the greater part of the excitation energy of Eu complexes is transferred directly from ions to dye molecules according to the inductive-resonance energy transfer mechanism rather than by means of energy migration over singlet levels of organic ligands in complexes of a nanostructure.     

1H NMR Spectral Simplification with Achiral and Chiral Lanthanide Shift Reagents. Methastyridone, 2,2-Dimethyl-5-(2-Phenylethenyl)-4-Oxazolidinone

Abstract

The 60 MHz ¹H NMR spectra of methastyridone, 2,2-dimethyl-5-(2-phenylethenyl)-4-oxazolidinone, 1, have been studied at 28° in CDCl₃ solution with the achiral reagent tris(6,6,7,7,8,8,8-heptafluoro-2,2-dimethyl-3,5-octanedionato)europium(III), 2, Eu(FOD)₃, and the chiral reagent tris[3-(heptafluoropropylhydroxy-methylene)-d?camphorato]europium(III), 3, Eu(HFC)₃.     

Vibrational Study of the Complexes Pentamethyl Cyclopenta-Dienyldicarbonyl Rhenium Phosphine and Phosphite : (n5-C5Me5)Re(CO)2(PR3) R= Me,OMe, OPh

Abstract

A complete vibrationalassignment of the title compounds is performed from their IR and Raman Spectra. A normal coordinate treatment of these molecules based on a simplified model allow us to confirm most of the experimental assignments.

A comparison of some structural aspects of these complexes with Cp?Re(CO)₃ are also discussed. Additionally, the preparation and characterization of the trimethylphosphite derivative is reported.     

Synthesis, characterization, and oxygen sensing properties of Ru(II) complex covalently grafted to mesoporous MCM-41

Novel oxygen sensing materials consisting of [Ru(Bphen)₂bpy]²⁺ (Bphen=4,7-diphenyl-1,10-phenanthroline, bpy=2,2′-bipyridyl) portion covalently grafted to the backbones of the ordered functionalized mesoporous MCM-41 are synthesized by co-condensation of tetraethoxysilane (TEOS) and the functionalized Ru(II) complex [Ru(Bphen)₂Bpy-Si]²⁺ using surfactant cetyltrimethylammoniumbromide (CTAB) as template. The Bpy-Si was used as not only one of the precursors of the sol-gel process but also the second ligand of Ru(Bphen)₂Cl₂·2H₂O complex to prepare the functionalized mesoporous materials for oxygen sensors. Dye leaching shortcoming is overcome due to the Si-C bonds. The derivative mesoporous oxygen sensing materials are characterized by Fourier transform infrared (FT-IR), small angle X-ray diffraction (SAXRD), luminescence intensity quenching Stern-Volmer plots, and excited-state decay analysis. The mesoporous materials show higher sensitivity to the O₂ concentration in N₂ (I₀/I₁₀₀=23.2) and shorter response time (1.2 s) in comparison with those based on sol-gel method. When the concentration of oxygen is 10%, the luminescence intensity of the oxygen sensor can be quenched by 89.9%, suggesting that it is highly sensing at low concentration of oxygen.     

On the Possibility of Glucose Sensing Using Boronic Acid and a Luminescent Ruthenium Metal-Ligand Complex

We describe a new approach to optical sensing of glucose based on the competitive interactions between a ruthenium metal ligand complex, a boronic acid derivative and glucose. The metal-ligand complex [Ru(2,2-bipyridine)₂(5,6-dihydroxy-1,10-phenanthroline)](PF₆)₂ at pH 8 forms a reversible complex with 2-toluylboronic acid or 2-methoxyphenyl boronic acid. Complexation is accompanied by a several-fold increase in the luminescent intensity of the ruthenium complex. Addition of glucose results in decreased luminescent intensity, which appears to be the result of decreased binding between the metal-ligand complex and the boronic acid. Ruthenium metal-ligand complexes are convenient for optical sensing because their long luminescent decay times allow lifetime-based sensing with simple instrumentation.     

Microwave dielectric properties of (1 − x)(Mg0.95Co0.05)TiO3–x(Na0.5La0.5)TiO3 ceramic system

The microstructures and the microwave dielectric properties of the (1 − x)(Mg_0.95Co_0.05)TiO₃–x(Na_0.5La_0.5)TiO₃ ceramic system were investigated. Two-phase system was confirmed by the XRD patterns and the EDX analysis. A co-existed second phase (Mg_0.95Co_0.05)Ti₂O₅ was also detected. The microwave dielectric properties are strongly related to the density and the matrix of the specimen. A new microwave dielectric material 0.88(Mg_0.95Co_0.05)TiO₃–0.12(Na_0.5La_0.5)TiO₃, possessing an excellent combination of dielectric properties: ε_r  22.36, Q × f  110,000 GHz (at 9 GHz), τ_f  2.9 ppm/°C), is proposed as a candidate dielectric for GPS patch antennas.     

Studies on the Fluorescence Fiber-Optic DNA Biosensor Using <Emphasis Type="Italic">p</Emphasis>-Hydroxyphenylimidazo[f]1,10-phenanthroline Ferrum(III) as Indicator

A complex Fe(phen)₂·PHPIP·3ClO₄·2H₂O, where phen = 1,10-phenanthroline and PHPIP = p-hydroxyphenylimidazo[f]1,10-phenanthroline, was synthesized and acted as a good fluorescence indicator based on its interaction with double-duplex DNA. Then a fiber-optic DNA biosensor of fluorimetric detection was developed based on the recognition of target DNA in DNA hybridization assays. A probe ssDNA was covalently immobilized onto the surface of quartz optical fibers and then the probe ssDNA hybridized with complementary ssDNA introduced into the local environment of the sensor. The hybridization with complementary strands was monitored in real time by fluorimetric detection. Several factors affecting the probe immobilization, target DNA hybridization, and indicator binding reactions were optimized to maximize the sensitivity and shorten the assay time. Using this method, a sequence of the 16-mer oligonucleotides could be quantified over the range from 4.98 × 10⁻⁷ to 4.88 × 10⁻⁶ M and a detection limit of 1.08 × 10⁻⁷ M. And the designed optic-fiber biosensor could be conveniently regenerated by thermal denature. The utility of the novel hybridization indicator could provide a simple, rapid, low toxicity and reusable detection.     

Optical oxygen sensing materials based on trinuclear starburst ruthenium(II) complexes assembled in mesoporous silica

The preparation and oxygen sensing properties of optical materials based on two trinuclear starburst ruthenium(II) complexes: [Ru₃(bpy)₆(TMMB)]⁶⁺ (1) and [Ru₃(phen)₆(TMMB)]⁶⁺ (2) (bpy=2,2′-bpyridine, phen=1,10-phenathroline, TMMB=1,3,5-tris[2-(2′-pyridyl)benzimidazoyl]methylbenzene) assembled in two mesoporous silicate (MS) are described in this paper. The luminescence of Ru complexes/silicate assemble materials can be quenched by molecular oxygen with good sensitivity (I₀/I₁>5 for 2/MS and I₀/I₁>3 for 1/MS), indicating that trinuclear starburst Ru(II) complexes/MS systems are sensitive to oxygen molecules.     

Characteristics of Fe2O3 Nanoparticles from Doped Low-pressure H2/O2/Ar Flames

A burner stabilized premixed low-pressure flame has been used to generate iron-oxide (Fe₂O₃) nanoparticles with sizes in the range 7–20nm. The H₂/O₂/Ar flames were doped with different amounts of iron-pentacarbonyl (Fe(CO)₅) with concentrations in the range 524–2096ppm. The influence of precursor concentration on composition, structure, morphology, and size have been studied utilizing transmission electron microscopy (TEM), X-ray powder diffraction (XRD), measurements of the specific surface area (BET), and infrared spectroscopy (FT-IR). The product particles consist of both, the - and the -phase of Fe₂O₃. Average particle sizes were measured in the range 7.4–16nm depending on precursor concentration and flame conditions.     

Thermal quenching of photoluminescence of Eu3+ ions in an Eu(fod)3 complex

We have studied the photoluminescence (PL) spectra of Eu³⁺ ions in the complex Eu(fod)₃ (fod = 6,6,7,7,8,8,8-heptafluoro-2,2-dimethyl-3,5-octadione) and also in polymers doped with Eu(fod)₃ with the help of supercritical carbon dioxide. We have established that in the temperature range 20°C–100°C, we observe thermal quenching of the photoluminescence of Eu³⁺ ions, and this quenching is most efficient in polycrystalline Eu(fod)₃ powder and Eu(fod)₃-doped polypropylene. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 73, No. 3, pp. 315–319, May–June, 2006.     

Polarized emission from a rhenium metal-ligand complex

We report the first observation of polarized emission from a rhenium-phenanthroline complex, Re(CO)₃(phen)Cl. Highly luminescent rhenium complexes are known, with quantum yields near 0.5 and lifetimes in excess of 10 s. The detection of polarized emission suggests the use of rhenium complexes as probes of the hydrodynamics of large macromolecular complexes and for use in fluorescence polarization immunoassays with gated detection.     

Electrogenerated chemiluminescence of chosen terbium complexes deposited into Al2O3 layer at the aluminium cathode

Cathodic electrogenerated luminescence of terbium(III)-(acetylacetonate)₃-1,10-phenanthroline, terbium(III)-(salicylate)₃ and terbium(III)-(salicylate)₃-1,10-phenanthroline complexes were studied. In this experiment terbium complexes were coated upon aluminium porous oxide layer by physical adsorption from methanolic or acetonate solution. The hexagonally ordered porous aluminium oxide has been prepared in a two-step anodization process in sulphuric acid solution. The primary step of cathodic ECL in this method is tunnel emission of hot electrons through barrier oxide layer. Electrochemiluminescence was achieved by recombination of the radical species, such as reduced ligand's aromatic moiety and strong oxidizing agent, i.e. sulphate radicals. This study was conducted to investigate ECL spectra, kinetic and integral ECL intensity relative to the porous aluminium oxide layer thickness.     

Luminescent europium(III) and terbium(III) nicotinate complexes covalently linked to a 1,10-phenanthroline functionalised sol-gel glass

Sol-gel glasses with covalently linked lanthanide complexes are luminescent materials which can be processed at ambient temperatures, which have a good solubility and uniform distribution of the complexes in the host matrix. In this study, a luminescent terbium(III) complex was covalently coupled to an organic-inorganic hybrid material prepared by the sol-gel process. This was realised by use of nicotinate groups as the ligands for the terbium(III) ion. The [Tb(C₅H₄NCO₂)₃(phen)(H₂O)₂] complex was immobilised on the sol-gel glass matrix and showed a green photoluminescence upon irradiation with ultraviolet light. The nicotinate groups act as an antenna to absorb the incident light and channel the excitation energy to the terbium(III) ion. The sol-gel glass was also prepared for the corresponding europium(III) complex. In this case, excitation of the europium(III) ion was possible via both the nicotinate ligands and the 1,10-phenanthroline ligands. High-resolution luminescence and excitation spectra were recorded and the radiative lifetimes were measured.