LC–MS/MS method for the characterization of the forced degradation products of Entecavir

A rapid, specific, and reliable isocratic LC–MS/MS method has been developed and validated for the identification and characterization of the stressed degradation products of Entecavir (ETV). ETV, an antiviral drug, was subjected to hydrolysis (acidic, alkaline, and neutral), oxidation, photolysis and thermal stress, as per the international conference on harmonization specified conditions. The drug showed extensive degradation under oxidative and acid hydrolysis stress conditions. However, it was stable to thermal, acidic, neutral, and photolysis stress conditions. A total of five degradation products were observed and the chromatographic separation of the drug and its degradation products were achieved on a Waters Symmetry C₁₈ (250 mm × 4.6 mm, id, 5 μm) column using 20 mM ammonium acetate (pH 3)/acetonitrile (50:50, v/v) as a mobile phase. The degradation products were characterized by LC–MS/MS and its fragmentation pathways were proposed. The LC–MS method was validated with respect to specificity, linearity, accuracy, and precision. No previous reports were found in the literature regarding the degradation behavior of ETV.     

Characterization of degradation products of Ivabradine by LC‐HR‐MS/MS: a typical case of exhibition of different degradation behaviour in HCl and H2SO4 acid hydrolysis

A validated stability‐indicating HPLC method was established, and comprehensive stress testing of ivabradine, a cardiotonic drug, was carried out as per ICH guidelines. Ivabradine was subjected to acidic, basic and neutral hydrolysis, oxidation, photolysis and thermal stress conditions, and the resulting degradation products were investigated by LC‐PDA and LC‐HR‐MS/MS. The drug was found to degrade in acid and base hydrolysis. An efficient and selective stability assay method was developed on Phenomenex Luna C18 (250 × 4.6 mm, 5.0 µm) column using ammonium formate (10 mM, pH 3.0) and acetonitrile as mobile phase at 30 °C in gradient elution mode. The flow rate was 0.7 ml/min and detection wavelength was 286 nm. A total of five degradation products (I‐1 to I‐5) were identified and characterized by LC‐HR‐MS/MS in combination with accurate mass measurements. The drug exhibited different degradation behaviour in HCl and H₂SO₄ hydrolysis conditions. It is a unique example where two of the five degradation products in HCl hydrolysis were absent in H₂SO₄ acid hydrolysis. The present study provides guidance to revise the stress test for the determination of inherent stability of drugs containing lactam moiety under hydrolytic conditions. Most probable mechanisms for the formation of degradation products have been proposed on the basis of a comparison of the fragmentation pattern of the drug and its degradation products. In silico toxicity revealed that the degradation products ( I‐2 to I‐5 ) were found to be severe irritants in case of ocular irritancy. The analytical assay method was validated with respect to specificity, linearity, range, precision, accuracy and robustness. Copyright © 2015 John Wiley & Sons, Ltd.     

Identification and characterization of stress degradation products of sumatriptan succinate by using LC/Q‐TOF‐ESI‐MS/MS and NMR: Toxicity evaluation of degradation products

Sumatriptan succinate, a selective 5‐HT1B receptor agonist, was subjected to forced degradation studies as per to International Conference on Harmonization‐specified conditions. The drug exclusively showed its degradation under basic, photolytic, and oxidative stress conditions, whereas it was found to be stable under acidic, thermal, and neutral conditions. Eight (DP‐1 to DP‐8) degradation products were identified and characterized by UPLC‐ESI/MS/MS experiments combined with accurate mass measurements. The effective chromatographic separation was achieved on Hibar Purospher STAR, C18 (250 × 4.6 mm, 5 μm) column using mobile phase consisting of 0.1% formic acid and methanol at a flow rate of 0.6 mL/minute in gradient elution method. It is noteworthy that 2 major degradation products DP‐3 and DP‐7 were isolated using preparative HPLC and characterized by advanced NMR experiments. The degradation pathway of the sumatriptan was established, which was duly justified by mechanistic explanation. In vitro cytotoxicity of isolated DPs was tested on normal human cells such as HEK 293 (embryonic kidney cells) and RWPE‐1 (normal prostate epithelial cells). This study revealed that they were nontoxic up to 100 μm concentration. Further, in silico toxicity of the drug and its degradation products was determined using ProTox‐II prediction tool. This study revealed that DP‐4 and DP‐8 are predicted for immune toxicity. Amine oxidase A and prostaglandin G/H synthase 1 are predicted as toxicity targets for DP‐3, DP‐4, and DP‐6 whereas DP‐1 and DP‐2 are predicted for amine oxidase A target.     

An innovative impurity profiling of Avanafil using LC and LC-MS/MS with in-silico toxicity prediction

Degradation of the drug can lead to the formation of toxic substance hence drug quality and stability is a major concern by pharma regulators. A Selected phosphodiesterase type 5 inhibitor drug Avanafil (AV) structure has amide, arylchloro and hydroxide as functional groups which can easily eliminated during hydrolysis. Henceforth, thoroughly chemical stability of AV was carried out according to ICH guideline Q1A (R2). The drug and marketed tablet formulation undergoes degradation in hydrolytic (acid, base, neutral), thermal, photolytic, oxidative conditions and forms a total new sixteen degradation products (D.P.s) which were identified by LC, characterized by LC-MS/MS and probable degradation mechanism for each stress conditions are proposed. All sixteen D.P.s were identified by optimized LC conditions; C18 column using 10 mM ammonium acetate: ACN (60:40, v/v), pH 4.5 as mobile phase at 0.9 mL min⁻¹ of flow rate, 239 nm wavelength at 20 °C column temperature and the method being LC-MS compatible characterized by LC-MS/MS confirmed by relative retention time (RRT). The structure of D.P.s was confirmed from the fragmentation pattern obtained by LC-MS/MS and further probable degradation mechanism for each stress condition is proposed. The drug and its marketed tablet formulation showed similar degradation peaks which were confirmed using RRT, photodiode array (PDA) and LC-MS. Drug degradation happens due to nucleophilic substitution reaction, amide hydrolysis, electron withdrawing properties of amide, dechlorination and bond cleavage due to energy. The amide group in AV structure can undergo hydrolysis, while due to aryl chloride and hydroxide group in structure it undergoes photodecomposition. A comprehensive stress study reveals that AV is more prone to degrade in light, temperature and moisture; hence AV requires proper storage condition temperature below 25 °C with protection to light and moisture. In silico toxicity prediction of physicochemical properties revealed that all the physicochemical parameters of impurities were within the acceptable limit which indicates that no impurity is at any risk of toxicity. In detail, the LC-MS/MS compatible AV degradation study is fully validated as per ICH Q2 (R1) guideline.     

LC–MS/MS and NMR characterization of forced degradation products of mirabegron

A rapid, precise, and reliable liquid chromatography tandem mass spectrometry (LC–MS/MS) method has been developed for the characterization of stressed degradation products of mirabegron. It is used in the treatment of overactive bladder and administered to treat urinary symptoms such as urgency or frequency and incontinence. It also works by relaxing the muscles around bladder.

Mirabegron was subjected to hydrolysis (acidic, alkaline, and neutral) and peroxidation, as per ICH-specified conditions. The drug showed degradation under stress conditions. However, it was stable to neutral conditions. A total of seven degradation products were observed and the chromatographic separation of the drug and its degradation products was achieved on X-TerraRP-8 (250 mm × 4.6 mm, i.d., 5 µm) column using 0.01 M ammonium acetate as mobile phase-A and 60:40 ratio of acetonitrile (ACN):water as mobile phase-B. The degradation products were characterized by LC–MS/MS and its fragmentation pathways were proposed. Probable possible structures were drawn based on parent and daughter molecular ions. One peroxide degradant impurity was isolated using preparative LC and characterized using liquid chromatography–mass spectrometry and NMR data.     

Study of degradation behavior of besifloxacin,characterization of its degradation products by LC–ESI–QTOF–MS and their in silico toxicity prediction

Knowledge and understanding of the stability profile of a drug is important as it affects its safety and efficacy. In the present work, besifloxacin, a new, fourth‐generation fluoroquinolone antibiotic, was subjected to different forced‐degradation conditions as per International Conference on Harmonization (ICH) guidelines such as hydrolysis (acid, base and neutral), oxidation, thermal and photolysis. The drug degraded under acidic, basic, oxidative and photolytic conditions while it was found to be stable under dry heat and neutral hydrolytic conditions. In total, five degradation products (DPs) were formed under different conditions—DP1 and DP2 (photolysis), DP3 (oxidation), DP4 (acidic), DP3 and DP5 (basic). The chromatographic separation of besifloxacin and its degradation products was achieved on a Sunfire C₁₈ (250 mm × 4.6 mm, 5 μm) column with 0.1% aqueous formic acid–acetonitrile as a mobile phase. The gradient RP‐HPLC method was developed and validated as per ICH guidelines. The degradation products were characterized with the help of LC–ESI–QTOF mass spectrometric studies and the most likely degradation pathway of the drug was proposed. In silico toxicity assessment of the drug and its degradation products was carried out, which indicated that DP3 and DP4 carry a mutagenicity alert.     

Characterization of forced degradation products of ketorolac tromethamine using LC/ESI/Q/TOF/MS/MS and in silico toxicity prediction

Ketorolac, a nonsteroidal anti‐inflammatory drug, was subjected to forced degradation studies as per International Conference on Harmonization guidelines. A simple, rapid, precise, and accurate high‐performance liquid chromatography combined with electrospray ionization quadrupole time‐of‐flight tandem mass spectrometry (LC/ESI/Q/TOF/MS/MS) method has been developed for the identification and structural characterization of stressed degradation products of ketorolac. The drug was found to degrade in hydrolytic (acidic, basic, and neutral), photolytic (acidic, basic, and neutral solution), and thermal conditions, whereas the solid form of the drug was found to be stable under photolytic conditions. The method has shown adequate separation of ketorolac tromethamine and its degradation products on a Grace Smart C‐18 (250 mm × 4.6 mm i.d., 5 µm) column using 20 mM ammonium formate (pH = 3.2): acetonitrile as a mobile phase in gradient elution mode at a flow rate of 1.0 ml/min. A total of nine degradation products were identified and characterized by LC/ESI/MS/MS. The most probable mechanisms for the formation of degradation products have been proposed on the basis of a comparison of the fragmentation of the [M + H]⁺ ions of ketorolac and its degradation products. In silico toxicity of the drug and degradation products was investigated by using topkat and derek softwares. The method was validated in terms of specificity, linearity, accuracy, precision, and robustness as per International Conference on Harmonization guidelines. Copyright © 2014 John Wiley & Sons, Ltd.     

MS2/TOF and LC-MS/TOF studies on toremifene to characterize its forced degradation products

The present study was designed to characterize the possible degradation products of toremifene under varied conditions as prescribed by ICH guidelines Q1A(R2). The forced degradation studies were conducted on toremifene citrate under the conditions of hydrolysis (acidic, basic and neutral), photolysis, oxidation and dry heat. The drug was found unstable to photolysis and hydrolysis in water and acidic media but stable to alkaline hydrolysis, peroxide oxidation and thermal degradation. In total fifteen degradation products (I-XV) were formed, which were resolved from each other and the drug on a C-18 column employing an isocratic elution method. A complete mass fragmentation pattern of the drug was established with the help of LC/ESI-MS/TOF to assist characterization of the degradation products. Of the fifteen products, six products III, IV, VII, VIII, XIV and XV were detected in LC-MS. The molecular masses of III, IV, VII and VIII were found to be the same i.e., 387, while those of XIV and XV were 389 and 403, respectively. Structures of these products were elucidated through comparison of their mass fragmentation patterns with the drug, which were proposed on the basis of accurate masses of the parent and fragment ions. These were characterized as (Z)-2-(2-(dimethylamino)ethyl)-4-(4-hydroxy-1,2-diphenylbut-1-enyl)phenol (III), (E)-2-(2-(dimethylamino)ethyl)-4-(4-hydroxy-1,2-diphenylbut-1-enyl)phenol (IV), (E)-4-(4-(2-(dimethylamino)ethoxy)phenyl)-3,4-diphenylbut-3-en-1-ol (VII), (Z)-4-(4-(2-(dimethylamino)ethoxy)phenyl)-3,4-diphenylbut-3-en-1-ol (VIII), 2-(4-(10-(2-chloroethyl)phenanthren-9-yl)phenoxy)-N-methylethanamine (XIV), and 2-(4-(10-(2-chloroethyl)phenanthren-9-yl)phenoxy)-N,N-dimethylethanamine (XV). Finally, a most plausible mechanistic explanation for degradation of the drug in different chemical environments is also proposed. The results of the study disclose six new degradation related impurities of the drug.     

Identification and structural characterization of major degradation products of tapentadol by using liquid chromatography–tandem mass spectrometry

Tapentadol, a centrally acting analgesic was subjected to hydrolysis (acidic, alkaline, and neutral), oxidation, photolysis, humidity, and thermal stress conditions as per International Conference on Harmonization prescribed guidelines. Tapentadol was found susceptible to oxidative stress that produced two major degradation products DP-I and DP-II. However, it was stable to hydrolysis, photolysis, and thermal stress conditions. A simple, sensitive, and accurate high-performance liquid chromatography stability-indicating assay method (liquid chromatography–mass spectrometer compatible) was developed and validated for identification and characterization of stressed degradation products of Tapentadol. The chromatographic separation of the drug and its degradation products were achieved on Inertsil ODS, C18 (250 × 4.6 mm, i.d., 5 µm) column using a 12.5 mM aqueous ammonium acetate buffer (with 0.2% triethyl amine and final pH of buffer was adjusted to 3.60 with glacial acetic acid): acetonitrile (75:25, v/v) as a mobile phase. The degradation products were characterized by liquid chromatography mass spectrometry and subsequently its fragmentation pathway as well as plausible mechanism for generation of degradation products was also proposed. The stability indicating high-performance liquid chromatographic method was validated with respect to linearity, precision, and accuracy.     

Liquid chromatography/mass spectrometric studies on atorvastatin and its stress degradation products

A comprehensive mass fragmentation pathway of atorvastatin, which has not been reported so far, was established by subjecting the drug to multi-stage mass spectrometric (MSn) studies. It was used along with liquid chromatography/mass spectrometric (LC/MS) and liquid chromatography/time-of-flight mass spectrometric (LC/TOFMS) analyses to identify the drug degradation products formed under stress conditions of hydrolysis, oxidation and photolysis. Other than lactone, which is a reported hydrolysis product, six unknown hydrolytic products could be identified, viz., dehydrated drug, dehydrated drug lactone, and diastereomers of the drug, drug lactone, dehydrated drug, and dehydrated drug lactone. Among the two products separated under oxidative conditions, one was lactone, again formed as a result of drug hydrolysis in an acidic environment of peroxide solution. The other was similar to a reported oxidative product. Under photolytic conditions in solution, one new product could be identified, while most of the others matched with those known from the literature. Hence overall a more complete degradation pathway of the drug was established than known at present, by using a stress testing approach and employing LC/MS techniques.     

Identification of linoleic acid free radicals and other breakdown products using spin trapping with liquid chromatography-electrospray tandem mass spectrometry

Linoleic acid radical products formed by radical reaction (Fenton conditions) were trapped using 5,5-dimethyl-1-pyrrolidine-N-oxide (DMPO) and analysed by reversed-phase liquid chromatography coupled to electrospray mass spectrometry (LC-MS). The linoleic acid radical species detected as DMPO spin adducts comprised oxidized linoleic acid and short-chain radical species that resulted from the breakdown of carbon and oxygen centred radicals. Based on the m/z values, the short-chain products were identified as alkyl and carboxylic acid DMPO radical adducts that exhibited different elution times. The ions identified as DMPO radical adducts were studied by liquid chromatography-tandem mass spectrometry (LC-MS/MS). The LC-MS/MS spectra of linoleic acid DMPO radical adducts exhibited the fragment ion at m/z 114 and/or the loss of neutral molecule of 113 Da (DMPO) or 131 Da (DMPO + H2O), indicated to be DMPO adducts. The short-chain products identified allowed inference of the radical oxidation along the linoleic acid chain by abstraction of hydrogen atoms in carbon atoms ranging from C-8 to C-14. Other ions containing the fragment ion at m/z 114 in the LC-MS/MS spectra were attributed to DMPO adducts of unsaturated aldehydes, hydroxy-aldehydes and oxocarboxylic acids. The identification of aldehydic products formed by radical oxidation of linoleic acid peroxidation products, as short-chain product DMPO adducts, is a means of identifying lipid peroxidation products.     

Structural identification of degradants of moexipril by LC–MS/MS

A gradient LC–MS method was developed for the identification and characterization of degradants of moexipril using liquid chromatography electrospray ionization tandem mass spectrometry (LC/ESI‐MS/MS). Moexipril was subjected to hydrolysis (acid, base and neutral), oxidation, photolytic and thermal degradation conditions as mentioned in ICH guidelines Q1A (R2). The drug degraded under hydrolysis, oxidation and photolytic conditions, but it was stable under thermal conditions. In total, five degradants were formed and separated on an Agilent XDB C‐18 column (4.6 × 150 mm, 5 μm) in a gradient elution method. Four degradants ( D1 , D2 , D4 and D5 ) under acidic conditions, three degradants ( D2 , D3 and D4 ) under basic conditions and three degradants ( D1 , D4 and D5 ) under neutral and oxidative stress conditions were formed. In addition, two degradants ( D4 and D5 ) were formed under photolytic stress conditions. To elucidate the structures of degradants, fragmentation of moexipril and its degradants was studied using LC–MS/MS experiments and accurate mass measurements (HRMS) data. The fragment ions in the product ion tandem mass spectra of all the degradants were compared with those of moexipril and assigned the probable structures for the degradants.     

ESI-QqTOF-MS/MS and APCI-IT-MS/MS analysis of steroid saponins from the rhizomes of Dioscorea panthaica

Using high-resolution quadrupole time-of-flight mass spectrometry along with an electrospray ionization source (ESI-QqTOF-MS), accurate molecular weights of 13 steroid saponins extracted from the rhizomes of Dioscorea panthaica were acquired and the corresponding molecular formulae obtained. In order to elucidate the fragmentation pathways of steroid saponins in D. panthaica, 10 authentic samples were investigated using ESI-QqTOF-MS/MS. In addition, atmospheric pressure chemical ionization mass spectrometry combined with ion trap tandem mass spectrometry (APCI-IT-MS/MS) was used to analyze the structures of 13 steroid saponins in D. panthaica. Through the analysis of their tandem mass data, diagnostic fragment ions of the spirostanol and furostanol steroid saponins in D. panthaica were detected as m/z 271.2056 and 253.1951. In addition, four pairs of isomers were detected and the possible structures of four unknown steroid saponins in D. panthaica speculated. ESI-TOF and APCI-MS(n) have proved to be effective tools for research on fragmentation mechanism of steroid saponins and the rapid determination of native steroid saponins in extract mixture, thereby avoiding tedious derivation and separation steps.     

Stress degradation study and structure characterization of oxidation degradation product of dexlansoprazole using liquid chromatography-mass spectrometry/time of flight,liquid chromatography-tandem mass spectrometry and nuclear magnetic resonance

The present study deals with the forced degradation behavior of dexlansoprazole under International Conference on Harmonisation (ICH) prescribed stress conditions. The drug was found to be more labile under acid, base, neutral, oxidative hydrolysis and thermal stress, while it was moderately stable under photolytic conditions. The known and unknown degradation products were separated on a C-18 column using a stability-indicating method. Liquid chromatography-mass spectrometry (LC-MS) analysis was performed for all the degradation studies. Isolation and structure characterization of oxidation degradation products were executed using sophisticated tools, viz. preparative high performance liquid chromatography (HPLC), liquid chromatography-mass spectrometry/time of flight (LC-MS/TOF), liquid chromatography-tandem mass spectrometry (LC-MS/MS), and nuclear magnetic resonance (NMR). This study demonstrates an ample methodology of degradation studies and structure elucidation of unknown degradation products of dexlansoprazole, which helps in the development and stability study of active pharmaceutical ingredients and formulated products.     

Structural motifs in primary oxidation products of palmitoyl‐arachidonoyl‐phosphatidylcholines by LC‐MS/MS

Oxidative modifications to phospholipids (OxPL) play a major role in modulating signaling events in inflammation and infection, and complete understanding on the induced biological effects can only be understood based on knowledge of the oxidative motifs present. Specific neutral losses observed in tandem mass spectrometry data (LC‐MS/MS) of primary peroxidation products in oxidized palmitoyl‐arachidonoyl‐phosphatidylcholines (OxPAPC) provide information on the prevailing structural motifs regarding the oxidized acyl carbon chain, the nature of oxidized group and the site of carbon oxidation. The higher hydrophobicity of hydroperoxides compared to di‐hydroxy derivatives under reverse‐phase conditions together with specific fragmentation patterns enabled the identification of 12 structurally different OxPAPC structural (di‐hydroxy and hydroperoxide derivatives) and positional isomers as well as the presence of poly‐hydroxy together with isoprostanes derivatives. The fragmentation patterns described in quadrupole time‐of‐flight and linear ion trap instruments complement the m/z value and retention time parameters in the identification of oxidative composition in OxPAPC products becoming a valuable tool for the exploratory screening of oxidized phosphatidylcholines in OxPAPC extracts, distinction of native and modified PC isobaric structures in complex samples contributing to the increased understanding of redox lipidomics in inflammation and infection. Copyright © 2013 John Wiley & Sons, Ltd.     

Investigation of the electrochemical oxidation products of zotepine and their fragmentation using on-line electrochemistry/electrospray ionization mass spectrometry

When zotepine, an antipsychotic drug, was electrochemically oxidized using electrospray ionization mass spectrometry (ESI-MS) coupled with a microflow electrolytic cell, [M + 16 + H]+ (m/z 348), [M-H]+ (m/z 330) and [M-14 + H]+ (m/z 318) were observed as electrochemical oxidation product ions (M represents the zotepine molecule). Although a major fragment ion that was derived from the dimethyl aminoethyl moiety was observed only at m/z 72 in the collision-induced dissociation (CID) spectrum of zotepine, new fragments such as m/z 315 and 286 ions could be generated in the CID spectrum by combining electrochemical oxidation and CID. Since these fragments were relatively specific with high ion strength, it was thought that they would be useful for developing a sensitive LC-MS/MS assay. The S-oxide and N-demethylated products were detected by electrolysis assuring that a portion of P450 metabolites of zotepine could be mimicked by the electrochemistry/electrospray ionization mass spectrometry (EC/ESI-MS) system.     

Selective separation and characterization of the stress degradation products of ondansetron hydrochloride by liquid chromatography with quadrupole time‐of‐flight mass spectrometry

Ondansetron hydrochloride was subjected to forced degradation studies under various conditions of hydrolysis (acidic, basic, and neutral), oxidation, photolysis, and thermal as prescribed by International Conference on Harmonisation guideline Q1A (R2). A simple, selective, precise, and accurate high‐performance liquid chromatography method was developed on a Waters Xterra C₁₈ (150 × 4.6 mm id, 3.5 μm) column using 10 mM ammonium formate (pH 3.0)/methanol as a mobile phase in gradient elution mode at a flow rate of 0.6 mL/min. The method was extended to liquid chromatography quadrupole time‐of‐flight tandem mass spectrometry for identification and structural characterization of stress degradation products of ondansetron. The drug showed significant degradation in base hydrolytic and photolytic stress conditions in the liquid state, while it was found to be stable in neutral, acidic, thermal, and oxidative stress conditions. A total of five degradation products were characterized and most probable mechanisms for the formation of degradation products have been proposed on the basis of a comparison of the fragmentation of the [M + H]⁺ ions of the drug and its degradation products. Finally, the developed method was validated in terms of specificity, linearity, accuracy, precision, and robustness as per International Conference on Harmonisation guideline Q2 (R1).     

液相色谱-飞行时间质谱、液相色谱-串联质谱和核磁共振用于右旋兰索拉唑的强制降解研究和氧化降解产物的结构表征(英文)

The present study deals with the forced degradation behavior of dexlansoprazole under International Conference on Harmonisation(ICH)prescribed stress conditions. The drug was found to be more labile under acid,base,neutral,oxidative hydrolysis and thermal stress,while it was moderately stable under photolytic conditions. The known and unknown degradation products were separated on a C-18 column using a stabilityindicating method. Liquid chromatography-mass spectrometry(LC-MS)analysis was performed for all the degradation studies. Isolation and structure characterization of oxidation degradation products were executed using sophisticated tools,viz. preparative high performance liquid chromatography(HPLC),liquid chromatographymass spectrometry / time of flight(LC-MS / TOF),liquid chromatography-tandem mass spectrometry(LC-MS /MS),and nuclear magnetic resonance(NMR). This study demonstrates an ample methodology of degradation studies and structure elucidation of unknown degradation products of dexlansoprazole,which helps in the development and stability study of active pharmaceutical ingredients and formulated products.     

Study of the forced degradation behavior of prasugrel hydrochloride by liquid chromatography with mass spectrometry and liquid chromatography with NMR detection and prediction of the toxicity of the characterized degradation products

Prasugrel was subjected to forced degradation studies under conditions of hydrolysis (acid, base, and neutral), photolysis, oxidation, and thermal stress. The drug showed liability in hydrolytic as well as oxidative conditions, resulting in a total of four degradation products. In order to characterize the latter, initially mass fragmentation pathway of the drug was established with the help of mass spectrometry/time‐of‐flight, multiple stage mass spectrometry and hydrogen/deuterium exchange data. The degradation products were then separated on a C₁₈ column using a stability‐indicating volatile buffer method, which was later extended to liquid chromatography‐mass spectrometry studies. The latter highlighted that three degradation products had the same molecular mass, while one was different. To characterize all, their mass fragmentation pathways were established in the same manner as the drug. Subsequently, liquid chromatography‐nuclear magnetic resonance (NMR) spectroscopy data were collected. Proton and correlation liquid chromatography with NMR spectroscopy studies highlighted existence of diastereomeric behavior in one pair of degradation products. Lastly, toxicity prediction by computer‐assisted technology (TOPKAT) and deductive estimation of risk from existing knowledge (DEREK) software were employed to assess in silico toxicity of the characterized degradation products.     

Discovering metabolites of post-harvest fungicides in citrus with liquid chromatography/time-of-flight mass spectrometry and ion trap tandem mass spectrometry

In this study, we benefit from the combination of liquid chromatography (LC)/time-of-flight (TOF) MS accurate mass measurements to generate elemental compositions of ions and LC/ion trap multiple MS (MSn) providing complementary structural information, which is useful for the elucidation of unknown organic compounds at trace levels in complex food extracts. We have applied this approach to investigate different citrus fruits extracts, and we have identified two post-harvest fungicides (imazalil and prochloraz), the main degradation product of imazalil ([M + H]+, m/z 257) and a non-previously reported prochloraz degradation product ([M + H]+, m/z 282). The database-mediated identification of the parent compounds was based on the generated elemental composition obtained from accurate mass measurements and additional qualitative information from the high resolution chlorine isotopic clusters of both the protonated molecules (imazalil, [M + H]+ 297.0556, <0.1 ppm error, 2-Cl; prochloraz, [M + H]+ 376.0381, 1.9 ppm error, 3-Cl) and their characteristic fragments ions (imazalil: m/z 255 and 159; prochloraz: m/z 308 and 266). The correlation between the structural information provided by ion trap MS/MS fragmentation pathways of the parent species and the TOF accurate mass elemental composition data of the degradation products were the key to elucidate the structures of the degradation products of both post-harvest fungicides. Finally, where standards were not available (prochloraz), further confirmation was obtained by synthesizing the proposed degradation product by acid hydrolysis of the parent standard and confirmation by LC/TOF-MS.