Simultaneous separation and enantioresolution of racemic local anesthetic drugs by capillary zone electrophoresis with Tween 20 and methyl-beta-cyclodextrin as selectors, employing a double plug technique

A new approach for simultaneous chiral and achiral separations by capillary zone electrophoresis is described. Two adjacent selector plugs, consisting of Tween 20 as an achiral and methyl-beta-cyclodextrin (CD) as a chiral selector, are employed and four related local anesthetics are used as model compounds. The principles of the partial filling technique, whereby the capillary is filled with the chiral selector solution followed by the micellar solution at different plug lengths and concentrations, prior to application of the solutes, was employed. During the run both capillary ends were dipped in a simple buffer, i.e., one without additives. The two separation media worked independently without any interaction. Separation of the solutes and their enantiomers was regulated by adjusting both the concentration and plug length (PL) of the micellar solution in the capillary, employing methyl beta-CD as chiral selector either at 38 or 76 mM. The solutes were separated on the basis of their affinity towards the micellar phase before they reached the methyl-beta-CD plug for enantioseparation. In the absence of the micellar plug, the enantiomers of prilocaine overlapped those of bupivacaine. The solutes and their enantiomers were completely separated by employing two adjacent plugs consisting of 100 mM Tween 20 solution (PL approximately 10 cm) and methyl-beta-CD solution at either 38 or 76 mM (PL approximately 30 cm).     

Capillary electrophoretic enantioseparation of m‐nisoldipine using two different β‐cyclodextrins

The methods for the enantioseparation of m‐nisoldipine, a new 1,4‐dihydropyridine calcium ion antagonist, were developed. The elaborated methods of m‐nisoldipine enantiomers separation were successfully performed using an anionic CD–sulfobutyl ether‐β‐CD (SBE‐β‐CD) or carboxymethyl‐β‐CD as chiral selector. However, the results indicated that SBE‐β‐CD was a better chiral selector for enantioseparation of the neutral m‐nisoldipine. Furthermore, comparing the two SBE‐β‐CDs, the derivative with a higher degree of substitution (DS) of 7.0 induced better enantioresolution than the one with low DS (4.0). In addition, possible chiral recognition mechanisms of dihydropyridines were discussed.     

Nonlinear effects in enantioselective chromatography: prediction of unusual elution profiles of enantiomers in non-racemic mixtures on an achiral stationary phase doped with small amounts of a chiral selector

Nonlinear effects caused by molecular association of enantiomers in non-racemic mixtures can cause unexpected effects in chiroptics, NMR spectroscopy, homogeneous catalysis, and chromatography. Herein we present a theoretical model to simulate and verify unusual elution orders of enantiomers on an achiral stationary phase doped with a small amount of a chiral selector or achiral columns coupled with columns doped with a chiral selector. Scenarios with strong, medium, and weak associations of enantiomers, different separation efficiencies typical for flash chromatography and liquid chromatography, and the influence of the enantioselectivity of the chiral selector on the complex equilibria have been investigated. The findings presented here are of importance for the validation of the determination of enantiomeric ratios in not fully separated elution zones as well as for the preparative separation of non-racemic enantiomeric mixtures on chiral stationary phases bonded to achiral matrices.     

Comparison of sulfobutylether- and sulfated-beta-cyclodextrins as additives for the chiral separation of basic spirobenzopyrans by capillary electrophoresis.

Three charged substituted beta-cyclodextrins (beta-CDs), sulfobutylether-beta-(SBE-beta-CD), degree of substitution (DS) 4 and 7), and sulfated-beta-(S-beta-CD) cyclodextrins, were compared as chiral additives in capillary electrophoresis for the enantiomeric separation of basic spirobenzopyran derivatives (pKa 9.9) which differ from each other by an N-alkyl group. The number of sulfobutylether groups attached to the cyclodextrin moiety significantly influences the enantioseparation of the basic drugs. SBE-beta-CD (DS 7) which is more strongly bound to cationic analyte than SBE-beta-CD (DS 4.6), requires smaller concentrations to achieve the same resolution. Besides, better enantioresolutions were obtained with S-beta-CD rather than with SBE-beta-CDs though higher concentrations are required, which led to high current values. However, both pairs of enantiomers cannot be resolved using S-beta-CD while SBE-beta-CDs make it possible to resolve simultaneous enantioseparation of such solutes slightly differing in hydrophobicity. This supports the hypothesis that hydrophobic interactions (outside of the CD cavity) between the butyl group attached to SBE-beta-CD and the N-alkyl group of spirobenzopyran play a role in the enantioseparation. On the other hand, the sulfate group of S-beta-CD was directly attached to the CD moiety which means that the S-beta-CD-drug complexation mechanism arises through the combination of electrostatic and hydrophobic (inside the CD cavity) interactions. Finally, enantiomers of spirobenzopyran drugs were satisfactorily resolved by CE using a 20 mg/mL S-beta-CD concentration (resolution 4.0), 7 mg/mL SBE-beta-CD DS 4 (resolution 1.3), or 5 mg/mL SBE-beta-CD DS 7 (resolution 3.3) added to the phosphate buffer (pH 2.6, 50 mM ionic strength).     

Chiral HPLC and physical characterisation of orthoconic antiferroelectric liquid crystals

New orthoconic antiferroelectric liquid crystalline materials were synthesised and characterised in their racemic forms and as (S) enantiomers. The materials possess oligo-methylene spacers of different lengths in semi-fluorinated achiral chains and lateral substitution by fluorine at two different positions of the molecular core. For comparison purposes, analogical materials without fluorine lateral substitutions were also prepared. Polysaccharide chiral stationary phases based on two different chiral selectors were used for the separation of the enantiomers of the individual racemic mixtures by high-performance liquid chromatography. A baseline separation of (S) and (R) enantiomers was obtained for four of the six studied liquid crystalline materials. Two of the materials were partially separated under the optimised separation conditions. The elution order of the individual enantiomers in the racemic mixtures was successfully assigned, as pure (S) enantiomers of all the studied materials were available. Both the position of the fluorine atom within the molecular core and the size of the achiral moiety had significant effects on the separation of the individual enantiomers of the studied compounds. Moreover, it was also found that the structure of the chiral stationary phase selector significantly influenced the enantiomeric resolution.     

The degree of substitution affects the enantioselectivity of sulfobutylether‐β‐cyclodextrin chiral stationary phases

Three chiral stationary phases were prepared by dynamic coating of sulfobutylether‐β‐cyclodextrin (SBE‐β‐CD) with different degrees of substitution, onto strong anion‐exchange stationary phases. The enantioselective potential and stability of newly prepared chiral stationary phases were examined using a set of structurally different chiral analytes. Measurements were performed in RP‐HPLC. Mobile phases consisted of methanol/formic acid, pH 2.10, and methanol/10 mM ammonium acetate buffer, pH 4.00, in various volume ratios. SBE‐β‐CDs with degrees of substitution (DS) 4, 6.3, and 10 proved suitable for the enantioseparation of 14, 11, and 8 analytes, respectively. The SBE‐β‐CD DS 4 based chiral stationary phase enabled the enantioseparation of the nearly all basic and neutral compounds. Chiral stationary phases with higher sulfobutylether‐β‐cyclodextrin substitution (especially DS 10) yielded higher enantioresolution values for acidic compounds.     

Optimization and validation of a new CE method for the determination of pantoprazole enantiomers

A new CE method using sulfobutylether-beta-cyclodextrin (SBE-beta-CD) as chiral additive was developed and validated for the determination of pantoprazole enantiomers. The primary factors affecting its separation efficiency, which include chiral selector, buffer pH, organic additive, and applied voltage, were optimized. The best results were obtained using a buffer consisting of 50 mM borax-150 mM phosphate adjusted to pH 6.5, 20 mg/mL SBE-beta-CD, and a 10 kV applied voltage. The optimized method was validated for linearity, precision, accuracy, and proved to be robust. The LOD and LOQ for R-(+)-pantoprazole were 0.9 and 2.5 μg/mL, respectively. The method is capable of determining a minimum limit of 0.1% (w/w) of R-enantiomer in S-(-)-pantoprazole bulk samples.     

Two-component chiral phase transfer catalysts: enantioselective esterification of an N-acylated amino acid

[see reaction]. The first example of a two-component chiral phase transfer catalyst is described which, operating in a biphasic solvent system, preferentially esterifies one enantiomer of a racemic N-acylated amino acid. The two-component catalyst is comprised of an achiral quaternary ammonium ion and a proline-derived chiral selector initially developed for the liquid chromatographic separation of enantiomers.     

Separation of multicomponent mixtures of 2,4-dinitrophenyl labelled amino acids and their enantiomers by capillary zone electrophoresis

The use of capillary zone electrophoresis (CZE) for the separation of a group of 33 2,4-dinitrophenyl labeled amino acids (DNP-AA), including DNP-AA racemates, DNP-L-AA enantiomers and achiral DNP-AAs, was investigated. Alpha-, beta- and gamma-cyclodextrins (CDs) and their derivatives (hydroxypropyl derivatives of alpha-, beta- and gamma-CDs, polymeric beta-CD and 6A-methylamino-beta-cyclodextrin (MA-beta-CD)) served as complexing agents and chiral selectors in this investigation. Although native alpha- and gamma-CDs and their derivatives influenced the effective mobilities of the studied DNP-AAs in different ways, they generally failed to resolve enantiomers of the individual DNP-AAs. On the other hand, beta-CD and all of its derivatives were found to be effective in this respect. Of these, the best results were achieved with a positively charged MA-beta-CD and this chiral selector resolved enantiomers of ten DNP-AA racemates available for this study. However, a complete resolution of these enantiomers in one CZE run required that the effect of the chiral selector be complemented by complexing effects of polyvinyl pyrrolidone (PVP) or gamma-CD. Complexing and chiral recognition capabilities of MA-beta-CD combined with complexing effects of gamma-CD and PVP provided separating conditions suitable for the CZE separations of multicomponent mixtures of DNP-AAs with preserved resolutions of the enantiomers. For example, a mixture consisting of 43 DNP-AA constituents was resolved using an MA-beta-CD/gamma-CD combination with three peak overlaps.     

基于非手性离子液体的毛细管电泳法拆分3种手性药物

建立了以非手性离子液体1-正丁基-3-甲基咪唑氯(［BMIM］Cl)为手性分离的添加剂、β-环糊精作为手性选择剂的毛细管区带电泳(CZE)分离扑尔敏、氯霉素前体和氧氟沙星3种对映体的方法,并与未添加［BMIM］Cl的CZE分离情况进行了对比研究。发现［BMIM］Cl对手性药物的拆分有协同作用,不仅能够增加对映体的分离度,还能有效地抑制毛细管内壁对样品分子的吸附作用,改善峰形。采用离子液体辅助手性选择剂(尤其是环糊精)的CZE改进方法,为其他毛细管电泳难以分离的手性药物的分离分析提供了新的方法。     

Green high‐performance liquid chromatography enantioseparation of lansoprazole using a cellulose‐based chiral stationary phase under ethanol/water mode

A simple and environmentally friendly reversed‐phase high‐performance liquid chromatography method for the separation of the enantiomers of lansoprazole has been developed. The chromatographic resolution was carried out on the cellulose‐based Chiralpak IC‐3 chiral stationary phase using a green and low‐toxicity ethanol‐aqueous mode. The effects of water content in the mobile phase and column temperature on the retention of the enantiomers of lansoprazole and its chiral and achiral related substances have been carefully investigated. A mixed‐mode hydrophilic interaction liquid chromatography and reversed‐phase retention mechanism operating on the IC‐3 chiral stationary phase allowed us to achieve simultaneous enantioselective and chemoselective separations in water‐rich conditions. The enantiomers of lansoprazole were baseline resolved with a mobile phase consisting of ethanol/water 50:50 without any interference coming from chiral and achiral impurities within 10 min.     

Separations of antifungal compounds in capillary electrophoresis with two anionic cyclodextrins

CD‐CZE methods were developed for complete stereoisomeric separations of a series of six γ‐lactam analogues, of which some were neutral, or cationic depending on the background electrolyte nature. The tested cyclodextrin was the versatile sulfobutylether‐ β‐CD, used either in a phosphate buffer using capillaries dynamically coated with polyethylene oxide or in a borate buffer using uncoated capillaries. Long‐end and short‐end modes and concentration variations of chiral selectors allowed finding conditions of complete separation of four out of the six derivatives (i.e., 1 , 2 , 3, and 4 ) in short run times, confirming their broad range of applications. To separate the two last compounds, the highly sulfated‐ γ‐CD was examined as chiral selector in acidic phosphate conditions. The enantiomers of the γ‐lactam analogues 5 and 6 were baseline resolved with 5.5 and 4%, respectively as concentration in the buffer.     

Achiral and chiral determination of tramadol and its metabolites in urine by capillary electrophoresis

An achiral and chiral separation for the determination of tramadol and its main metabolite O-demethyltramadol in urine samples by CE with UV detection was developed. It was possible to separate tramadol and its phase I and phase II metabolites in one single run using a borate buffer. Furthermore, the simultaneous chiral separation of tramadol and the phase I metabolites was achieved using carboxymethyl-beta-cyclodextrin as chiral selector. To reach the required limits of quantification for the analytes, a preconcentration by solid-phase extraction for the achiral assay and by liquid-liquid extraction for the chiral assay was used. The methods were validated and their applicability was shown by the determination of tramadol and O-demethyltramadol in urine samples.     

Chiral analysis by mass spectrometry using the kinetic method in flow systems

Chiral analysis is an important task of analytical chemistry. Besides separation techniques, mass spectrometry can be applied in this field. One mass spectrometric approach is based on Cooks' kinetic method. The method was successfully applied in a static system in which the concentration of the analyte as well as the chiral selector solution was constant during the experiment. The application of the kinetic method in dynamic systems (changing concentration of analyte) is presented. Such systems allow the speeding up of the analytical process (flow injection analysis (FIA)) or the use of the kinetic method for chiral detection after liquid chromatographic separation.The influence of the concentration of the components of the chiral selector solution as well as its flow rate on the recognition of enantiomers was evaluated. A new procedure for correction for the differences between ratio of enantiomers in the liquid phase and their observed ratio in the gas phase is also described. A significant improvement in accuracy using this procedure was achieved. Applicability of the method was demonstrated in the analysis of amino acids using FIA as well as HPLC/MS. After an achiral separation of leucine and isoleucine, chiral mass spectrometric detection was successfully used for enantiomeric recognition.     

Enantioseparation of amino acid derivatives by capillary zone electrophoresis using vancomycin as chiral selector

The separation of racemic derivatized amino acids (N-acetyl) into their enantiomers was achieved using capillary zone electrophoresis employing vancomycin as a chiral selector. Due to the strong absorption properties of the chiral selector at the low wavelengths used, the partial-filling countercurrent method was adopted in order to improve method sensitivity. In the separation system studied, the chiral selector filled only a part of the capillary and, due to the appropriate selection of the pH, was moving in the opposite direction of the analytes keeping the detector free from absorbing compounds. The effect of several experimental parameters on the enantioresolution of analytes was studied, e.g., vancomycin concentration (0-5 mM), pH of the background electrolyte (pH 4-7), capillary temperature (15-35 degrees C), and the presence of an organic modifier in the run buffer (methanol or ethanol or n-propanol). N-Acetyl glutamic acid, serine, cystine, tyrosine, and proline were all baseline-resolved into their enantiomers and the enantioresolution factor (R(s)) was increased by raising the vancomycin concentration. pH 4 allowed the baseline resolution of the five studied analytes in the presence of 2.5 mM of chiral selector and an increase in pH caused a decrease of R(s).     

Enantioselective separation of the sunscreen agent 3-(4-methylbenzylidene)-camphor by electrokinetic chromatography: Quantitative analysis in cosmetic formulations

3-(4-Methylbenzylidene)-camphor (MBC) is a chiral sunscreen agent used in cosmetic products. In this work, the enantioseparation of MBC has been performed by EKC and applied to the analysis of the MBC enantiomers in cosmetic creams. Different experimental conditions (type and concentration of the chiral selector, temperature, and sample solvent) have been optimized. Due to the neutral nature of this compound, anionic CD derivatives were investigated as chiral selectors. Carboxymethylated-beta-CD (CM-beta-CD) showed the highest chiral separation power, observing that a 15 mM concentration of this CD at a working temperature of 15 degrees C enabled to obtain the highest enantioresolution. However, under these conditions, tailing of peaks obtained for the enantiomers was observed. The addition of increasing concentrations of the neutral alpha-CD to CM-beta-CD at a 15 mM concentration in a 100 mM borate buffer at pH 9.0 improved the enantiomeric separation and decreased peak tailing. The use of DMF for the total dissolution of the cosmetic creams, and methanol:water (1:1 v/v) for appropriate dilution enabled to observe good shape and size for the peaks of the MBC enantiomers. After optimizing a method for the preconditioning of the capillary, the analytical characteristics of the chiral separation method for the analysis of MBC were investigated. Linearity, LODs and LOQs, precision (instrumental repeatability, method repeatability, intermediate precision), accuracy, and selectivity were evaluated. The method was applied to analyze MBC enantiomers contained in two commercial cosmetic creams containing racemic MBC and to study the skin absorption of this compound with time.     

Chiral separation of gemifloxacin in sodium-containing media using chiral crown ether as a chiral selector by capillary and microchip electrophoresis

Chiral crown ether, (+)-(18-crown-6)-tetracarboxylic acid (18C6H(4)), is an effective chiral selector for resolving enantiomeric primary amines owing to the difference in affinities between 18C6H(4) and each of the amine enantiomers. In addition to the destacking effect of sodium ion in the sample solution, the strong affinity of sodium ion to the polyether ring of crown ether is unfavorable to chiral capillary electrophoresis using 18C6H(4) as a chiral selector. In this report, the chiral separation of gemifloxacin dissolved in a saline sample matrix using 18C6H(4) was investigated. Adding a chelating agent, ethylenediaminetetraacetic acid (EDTA), to the run buffer greatly improved the separation efficiencies and peak shapes. The successful chiral separation of gemifloxacin in a urinary solution was demonstrated for both capillary and microchip electrophoresis.     

Polymeric alkenoxy amino acid surfactants: II. Chiral separations of beta-blockers with multiple stereogenic centers

Two amino acid-based (leucine and isoleucine) alkenoxy micelle polymers were employed in this study for the separation of multichiral center-bearing beta-blockers, nadolol and labetalol. These polymers include polysodium N-undecenoxy carbonyl-L-leucinate (poly-L-SUCL) and polysodium N-undecenoxy carbonyl-L-isoleucinate (poly-L-SUCIL). Detailed synthesis and characterization were reported in our previous paper [26]. It was found that poly-L-SUCIL gives better chiral separation than poly-L-SUCL for both nadolol and labetalol isomers. The use of 50-100 mM poly-L-SUCIL as a single chiral selector provided separation of four and three isomers of labetalol and nadolol, respectively. Further optimization in separation of both enantiomeric pairs of nadolol and labetalol was achieved by evaluation of type and concentration of organic solvents, capillary temperature as well type and concentration of cyclodextrins. A synergistic approach, using a combination of poly-L-SUCIL and sulfated beta-CD (S-beta-CD) was evaluated and it showed dramatic separation for enantiomeric pairs of nadolol. On the other hand for labetalol enantiomers, separation was slightly decreased or remain unaffected using the dual chiral selector system. Finally, simultaneous separation of both nadolol and labetalol enantiomers was achieved in a single run using 25 mM poly-L-SUCIL and 5% w/v of S-beta-CD in less then 35 min highlighting the importance of high-throughput chiral analysis.     

Azithromycin as a new chiral selector in capillary electrophoresis

In capillary electrophoresis (CE), separation of enantiomers of a chiral compound can be achieved through the chiral interactions and/or complex formation between the chiral selector and the enantiomeric analytes on leaving their diastereomeric forms with different stability constants and hence different mobilities. A great number of chiral selectors have been employed in CE and among them macrocyclic antibiotics exhibited excellent enantioselective properties towards a wide number of racemic compounds. The use of azithromycin (AZM) as a chiral selector has not been reported previously. This work reports the use of AZM as a chiral selector for the enantiomeric separations of five chiral drugs and one amino acid (tryptophan) in CE. The enantioseparation is carried out using polar organic mixtures of acetonitrile (ACN), methanol (MeOH), acetic acid and triethylamine as run buffer. The influences of the chiral selector concentration, ACN/MeOH ratio, applied voltage and capillary temperature on enantioseparation are investigated. The results show that AZM is a viable chiral selector in CE for the enantioseparation of the type of chiral drugs investigated.     

Investigation of beta-CD-derivatized erythromycin as chiral selector in CE

A novel water-soluble beta-CD-derivatized erythromycin (EM) was synthesized and used as an effective chiral selector for the resolution of chiral compounds in CZE. The purpose of substitution at the primary hydroxyl site of beta-CD with 1-oxygen-2,3-epoxypropane is to produce a compound having functions of both beta-CD and EM. beta-CD-derivatized EM exhibited excellent enantioselectivities compared with single beta-CD and EM for chiral separation in CE. We also investigated the influence of pH and concentration of BGE, concentration of chiral selector, applied potential, and organic modifier on chiral compounds' separation.