Ferrous Iron Binding Key to Mms6 Magnetite Biomineralisation: A Mechanistic Study to Understand Magnetite Formation Using pH Titration and NMR Spectroscopy

Formation of magnetite nanocrystals by magnetotactic bacteria is controlled by specific proteins which regulate the particles’ nucleation and growth. One such protein is Mms6. This small, amphiphilic protein can self‐assemble and bind ferric ions to aid in magnetite formation. To understand the role of Mms6 during in vitro iron oxide precipitation we have performed in situ pH titrations. We find Mms6 has little effect during ferric salt precipitation, but exerts greatest influence during the incorporation of ferrous ions and conversion of this salt to mixed‐valence iron minerals, suggesting Mms6 has a hitherto unrecorded ferrous iron interacting property which promotes the formation of magnetite in ferrous‐rich solutions. We show ferrous binding to the DEEVE motif within the C‐terminal region of Mms6 by NMR spectroscopy, and model these binding events using molecular simulations. We conclude that Mms6 functions as a magnetite nucleating protein under conditions where ferrous ions predominate.     

Amorphous iron-(hydr) oxide networks at liquid/vapor interfaces: In situ X-ray scattering and spectroscopy studies

Surface sensitive X-ray reflectivity (XR), fluorescence (XF), and grazing incidence X-ray diffraction (GIXD) experiments were conducted to determine the accumulation of ferric iron Fe (III) or ferrous iron Fe (II) under dihexadecyl phosphate (DHDP) or arachidic acid (AA) Langmuir monolayers at liquid/vapor interfaces. Analysis of the X-ray reflectivity and fluorescence data of monolayers on the aqueous subphases containing FeCl(3) indicates remarkably high levels of surface-bound Fe (III) in number of Fe(3+) ions per molecule (DHDP or AA) that exceed the amount necessary to neutralize a hypothetically completely deprotonated monolayer (DHDP or AA). These results suggest that nano-scale iron (hydr) oxide complexes (oxides, hydroxides or oxyhydroxides) bind to the headgroups and effectively overcompensate the maximum possible charges at the interface. The lack of evidence of in-plane ordering in GIXD measurements and strong effects on the surface-pressure versus molecular area isotherms indicate that an amorphous network of iron (hydr) oxide complexes contiguous to the headgroups is formed. Similar experiments with FeCl(2) generally resulted with the oxidation of Fe (II)-Fe (III) which consequently leads to ferric Fe (III) complexes binding albeit with less iron at the interface. Controlling the oxidation of Fe (II) changes the nature and amount of binding significantly. The implications to biomineralization of iron (hydr) oxides are briefly discussed.     

Evidence of strong hydration and significant tilt of amphiphilic [2]rotaxane molecules in Langmuir films studied by synchrotron X-ray reflectivity

Surface sensitive X-ray techniques have been used to elucidate the structures of amphiphilic [2]rotaxane and dumbbell monolayers at the air/water interface. The [2]rotaxanes were found to adopt highly hydrated tilted and/or folded conformations on the water surface largely due to the hydrophilic nature of their tetracationic ring component. This conformation was less pronounced in monolayers of the dumbbell precursors. Increasing the surface pressure resulted in an expansion of [2]rotaxane monolayers in the vertical direction and decreased hydration.     

Formation of flat, homogeneous surfaces of organized molecular films of three-armed polymerizable amphiphiles with metal-scavenging properties

Surface complexing (i.e., metal-bridged polymerization in this study) of a three-armed amphiphilic compound with metal-scavenging properties has been investigated using the surface pressure-area (π-A) isotherms of a Langmuir monolayer from the subphase. Inductively coupled plasma mass spectrometry (ICP-MS) was also carried out on eluted solutions from corresponding multilayers of the solid. Furthermore, the molecular arrangement and surface morphology of organized molecular films of the resultant comb polymer were estimated by in-plane and out-of-plane X-ray diffraction (XRD) and by atomic force microscopy. From an analysis of the wide-angle X-ray diffraction of the corresponding monomer in the bulk, the long hydrocarbon chains are observed to pack hexagonally in the solid state. Compared to their monolayer on distilled water as the subphase, a polymerized monolayer on a buffer solution containing Cd(2+) ions is remarkably expanded at 15 °C. From ICP-MS and IR measurements, it is found that this monolayer stoichiometrically contains Cd(2+) ions on the -SH group. It is found by XRD that highly ordered layer structures and regular 2D lattices are constructed in the organized molecular films of the Cd-bridged comb polymer. Furthermore, the surface morphology of Langmuir-Blodgett films fabricated from the monolayers on a buffer solution containing Cd(2+) and Pd(2+) shows flat and smooth domains upon metal scavenging and polymerization.     

The effect of surface attachment on ligand binding: studying the association of Mg2+, Ca2+ and Sr2+ by 1-thioglycerol and 1,4-dithiothreitol monolayers

The difference in the heterogeneous binding of Mg(2+), Ca(2+) and Sr(2+) ions by 1-thioglycerol (TG) and 1,4-dithiothreitol (DTT) spontaneously adsorbed monolayers on Au has been studied following the changes in the double layer capacity. A mathematical treatment, based on calculating the electrochemical potential difference at the monolayer-electrolyte interface, has followed our recent work which dealt with the acid-base equilibrium at the interface as a means of calculating the pK of ionizable SAMs and their binding with Cd(2+). Experimentally, spontaneously adsorbed monolayers of TG and DTT were assembled on Au surfaces and studied by impedance spectroscopy and alternating current voltammetry (ACV). The capacity was measured for each of the modified surfaces at increasing concentrations of the divalent metal ions separately. The goal of this study has been to examine the effect of metal ion binding by similar ligands that are differently attached onto the surface. TG and DTT monolayers differ in their flexibility, which is a result of their attachment to the surface through one and two arms, respectively. The general trend of the apparent heterogeneous association constants of the divalent metal ions, which were calculated from the capacity measurements, was substantially different from the classical Irving-Williams series that is applicable to homogeneous systems. This difference could be nicely explained by the reduction of the degree of freedom and flexibility of the attached ligands.     

Adsorption of detergent-solubilized and phospholipase C-solubilized alkaline phosphatase at air/liquid interfaces

To investigate the influence of a hydrophobic anchor on protein adsorption, equilibrium and dynamic aspects of the adsorption of two different solubilized forms of rat osseous plate alkaline phosphatase on Langmuir monolayers of dimyristoylphosphatidic acid (DMPA) were studied. Surface pressure and surface potential measurements at air/liquid interfaces were carried out using the detergent-solubilized form (DSAP) of alkaline phosphatase, which holds a glycosylphosphatidylinositol (GPI) hydrophobic anchor, and the glycosylphosphatidylinositol-specific phospholipase C-solubilized form (PLSAP), lacking the GPI anchor. Similar surface transitions observed for both DMPA and DMPA/PLSAP mixed monolayers indicate that the presence of PLSAP does not promote significant changes in surface packing of the DMPA monolayer. However, PLSAP interacts with the polar portion of the phospholipid even at high lateral compression. The presence of the GPI anchor increases the adsorption of DSAP at a plain air/liquid interface and also enables the penetration of the protein into the DMPA monolayers. The penetration is dependent on both time and surface pressure. Up to 20 mN/m, the surface pressure increases smoothly indicating a diffusion followed by an adsorption process. Above 20 mN/m, after a fast increase, the surface pressure slowly decays to equilibrium values quite close to the initial surface pressures. The results indicate that the molecular packing of the lipid layer drives the enzyme adsorption to the interface either through the GPI anchor or by the polypeptide moiety.     

Langmuir and langmuir-blodgett films of metallosupramolecular polyelectrolyte-amphiphile complexes

A detailed analysis of a metallosupramolecular polyelectrolyte-amphiphile complex (PAC) at the air-water interface is presented. Langmuir isotherms, Brewster angle microscopy, and X-ray reflectance and diffraction methods are employed to investigate the structure of the Langmuir monolayers. The PAC is self-assembled from 1,3-bis[4'-oxa-(2,2':6',2' '-terpyridinyl)]propane, iron acetate, and dihexadecyl phosphate (DHP). Spreading the PAC at the air-water interface results in a monolayer that consists of two strata. DHP forms a monolayer at the top of the interface, while the metallosupramolecular polyelectrolyte is immersed in the aqueous subphase. Both strata are coupled to each other through electrostatic interactions. The monolayers can be transferred onto solid substrates, resulting in well-ordered multilayers. Such multilayers are model systems for well-ordered metal ions in two dimensions.     

Metal ion coordination with an asymmetric fan-shaped dendrimer at the air-water interface

Metal coordination to monolayers of 4-{10-[4-(3,5-bis-benzyloxy)-phenyl]-anthracen-9-yl}-benzoic acid ([G1-An]-CO(2)H, G1) and 4-(10-{4-[3,5-bis-(3,5-bis-benzyloxy)-benzyloxy]-phenyl}-anthracen-9-yl)-benzoic acid ([G2-An]-CO(2)H, G2) at the air-water interface and to Langmuir-Blodgett (LB) films was investigated using surface pressure-area isotherms, ultraviolet-visible (UV-vis) spectroscopy, atomic force microscopy (AFM), and X-ray reflectivity (XRR). Surface pressure-area isotherms show that G1 and G2 have different limiting areas according to the type of subphase. The limiting area of G1 and G2 increased more with Al(3+) than with Eu(3+) in the subphase. This result indicates that the hydrophilic core group is anchored to ions in the water via bidentate chelates with the carboxylate oxygen atoms of G1 and G2. Circular domains and aggregates were observed for the LB film. The different behavior of Eu(3+) and Al(3+) complexes is originated from the intrinsic nature of the ion, i.e., coordination number.     

In situ characterization of functional purple membrane monolayers at the air-water interface

The purple membrane (PM) of Halobacterium salinarum contains a single type of protein, bacterio-rhodopsin (bR), which is a member of the seven alpha-helices transmembrane protein family. This protein is a photoactive proton pump, translocating one proton from the cytoplasmic to the extracellular side of the PM per photon absorbed. bR is found in trimers in PM, where they are assembled in a two-dimensional hexagonal lattice. We show herein that stable and functional films can be built in monolayers at the air-water interface by spreading aqueous suspensions of purified and native PM patches. In situ spectroscopic measurements at the air-water interface indicate that bR remains photoactive in this environment. Physical parameters of these PM films, such as protein molecular area, irreversible in-plane aggregation, z-axis orientation, film thickness, and surface roughness, were determined from surface pressure and surface potential-area isotherms, fluorescence spectroscopy, and X-ray reflectivity at the air-water interface. We find that PM do form organized monolayers of membranes, with an optimal packing density at a surface pressure of approximately 20 mN/m, although no preferential vectorial alignment, with respect to the plane normal to the membrane, can be detected from fluorescence quenching experiments.     

Incorporation of blood clotting factor X into phospholipid model membranes: fluorescence microscopy imaging and subphase effects surrounding the lipid phase transition region

Factor X is a blood clotting protein that associates at membrane surfaces to become activated during the coagulation cascade. A molecular level understanding of the protein-membrane phospholipid interactions has not been reached, although it is thought that the protein binds to phospholipids in the presence of calcium through a bridge with the Gla (gamma-carboxyglutamic acid) domain on the protein. In this work, phospholipid Langmuir monolayers have been utilized as model membranes to study factor X association with phospholipid membrane components. Surface pressure measurements indicate that subphase addition of sodium, magnesium, and calcium ions enhances protein penetration of the lipid monolayer, with the largest association found with calcium ions in the subphase. Fluorescence microscopy images collected after protein penetration of lipid monolayers indicate monolayer condensation in the presence of sodium and magnesium ions. Aggregation of lipid domains is induced when calcium is in the subphase, indicating binding-induced flocculation of surface lipid aggregates. Calcium binding to factor X likely causes a conformational change which allows protein-membrane interaction via hydrophobic association with lipid molecules.     

Structural characteristics of dipalmitoylphosphatidylcholine and hydrolysates from sunflower protein isolate mixed monolayers spread at the air-water interface

In this work, surface film balance and Brewster angle microscopy techniques have been used to analyze the structural characteristics (structure, topography, reflectivity, thickness, miscibility, and interactions) of hydrolysates from sunflower protein isolate (SPI) and dipalmitoylphosphatidylcholine (DPPC) mixed monolayers spread on the air-water interface. The degree of hydrolysis (DH) of SPI, low (5.62%), medium (23.5%), and high (46.3%), and the protein/DPPC mass fraction were analyzed as variables. The structural characteristics of the mixed monolayers deduced from the surface pressure (pi)-area (A) isotherms depend on the interfacial composition and degree of hydrolysis. At surface pressures lower than the equilibrium surface pressure of SPI hydrolysate (pi(e)(SPI hydrolysate)), both DPPC and protein are present in the mixed monolayer. At higher surface pressures (at pi > pi(e)(SPI hydrolysate)), collapsed protein residues may be displaced from the interface by DPPC molecules. The differences observed between pure SPI hydrolysates and DPPC in reflectivity (I) and monolayer thickness during monolayer compression have been used to analyze the topographical characteristics of SPI hydrolysates and DPPC mixed monolayers at the air-water interface. The topography, reflectivity, and thickness of mixed monolayers confirm at microscopic and nanoscopic levels the structural characteristics deduced from the pi-A isotherms.     

Thermodynamic behavior and relaxation processes of mixed DPPC/cholesterol monolayers at the air/water interface

This study investigated the thermodynamic behavior and relaxation processes of mixed DPPC/cholesterol monolayers at the air/water interface at 37°C. Surface pressure–area isotherms and relaxation curves for the mixed monolayers were obtained by using a computer-controlled film balance. In the thermodynamic analysis of the mixed monolayers, the areas of monolayers exhibited negative deviations from the ideal values at all compositions for lower surface pressures. However, at higher surface pressures, distinctively positive deviations from ideality were observed at lower DPPC contents. Excess free energies of mixing had been calculated and the most stable state of the mixed monolayer with x_DPPC=0.5 or 0.6 was found. Moreover, the relaxation kinetics of the mixed monolayers was investigated by measuring the surface area as a function of time at a constant surface pressure of 40 mN m⁻¹. It was shown that the relaxation processes could be described by the models considering nucleation and growth mechanisms.     

Thermodynamic characteristics and Langmuir-Blodgett deposition behavior of mixed DPPA/DPPC monolayers at air/liquid interfaces

The role of dipalmitoylphosphatic acid (DPPA) as a transfer promoter to enhance the Langmuir-Blodgett (LB) deposition of a dipalmitoylphosphatidylcholine (DPPC) monolayer at air/liquid interfaces was investigated, and the effects of Ca2+ ions in the subphase were discussed. The miscibility of the two components at air/liquid interfaces was evaluated by surface pressure-area per molecule isotherms, thermodynamic analysis, and by the direct observation of Brewster angle microscopy (BAM). Multilayer LB deposition behavior of the mixed DPPA/DPPC monolayers was then studied by transferring the monolayers onto hydrophilic glass plates at a surface pressure of 30 mN/m. The results showed that the two components, DPPA and DPPC, were miscible in a monolayer on both subphases of pure water and 0.2 mM CaCl2 solution. However, an exception occurs between X(DPPA)=0.2 and 0.5 at air/CaCl2-solution interface, where a partially miscible monolayer with phase separation may occur. Negative deviations in the excess area analysis were found for the mixed monolayer system, indicating the existence of attractive interactions between DPPA and DPPC molecules in the monolayers. The monolayers were stable at the surface pressure of 30 mN/m for the following LB deposition as evaluated from the area relaxation behavior. It was found that the presence of Ca2+ ions had a stabilization effect for DPPA-rich monolayers, probably due to the association of negatively charged DPPA molecules with Ca2+ ions. Moreover, the Ca2+ ions may enhance the adhesion of DPPA polar groups to a glass surface and the interactions between DPPA polar groups in the multilayer LB film structure. As a result, Y-type multilayer LB films containing DPPC could be fabricated from the mixed DPPA/DPPC monolayers with the presence of Ca2+ ions.     

How accurate is Poisson-Boltzmann theory for monovalent ions near highly charged interfaces?

Surface sensitive synchrotron X-ray scattering studies were performed to obtain the distribution of monovalent ions next to a highly charged interface. A lipid phosphate (dihexadecyl hydrogen-phosphate) was spread as a monolayer at the air-water interface to control surface charge density. Using anomalous reflectivity off and at the L3 Cs+ resonance, we provide spatial counterion (Cs+) distributions next to the negatively charged interfaces. Five decades in bulk concentrations are investigated, demonstrating that the interfacial distribution is strongly dependent on bulk concentration. We show that this is due to the strong binding constant of hydronium H3O+ to the phosphate group, leading to proton-transfer back to the phosphate group and to a reduced surface charge. The increase of Cs+ concentration modifies the contact value potential, thereby causing proton release. This process effectively modifies surface charge density and enables exploration of ion distributions as a function of effective surface charge-density. The experimentally obtained ion distributions are compared to distributions calculated by Poisson-Boltzmann theory accounting for the variation of surface charge density due to proton release and binding. We also discuss the accuracy of our experimental results in discriminating possible deviations from Poisson-Boltzmann theory.     

Interactions of a fungistatic antibiotic, griseofulvin, with phospholipid monolayers used as models of biological membranes

Griseofulvin (GF) is an oral antibiotic for widely occurring superficial mycosis in man and animals caused by dermaphyte fungi; it is also used in agriculture as a fungicide. The mechanism of the biological activity of GF is poorly understood. Here, the interactions of griseofulvin with lipid membranes were studied using 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-dilauroyl-sn-glycero-3-phosphocholine (DLPC), and 1,2-myristoyl-sn-glycero-3-phosphoethanolamine (DMPE) monolayers spread at the air/water interface. Surface pressure (Pi), electric surface potential (Delta V), grazing incidence X-ray diffraction (GIXD), and Brewster angle microscopy (BAM) were used for studying pure phospholipid monolayers spread on GF aqueous solutions, as well as mixed phospholipid/GF monolayers spread on pure water subphase. Moreover, phospholipase A2 (PLA2) activity toward DLPC monolayers and molecular modeling of the GF surface and lipophilic properties were used to get more insight into the mechanisms of GF-membrane interactions. The results obtained show that GF has a meaningful impact on the film properties; we propose that nonpolar interactions are by and large responsible for GF retention in the monolayers. The modification of membrane properties can be detected using both physicochemical and enzymatic methods. The results obtained may be relevant for elaborating GF preparations with increased bioavailability.     

Protein-directed assembly of binary monolayers at the interface and surface patterns of protein on the monolayers

Ferritin-directed assembly of binary monolayers of zwitterionic dipalmitoylphosphatidylcholine and cationic dioctadecyldimethylammonium bromide (DOMA) at the interface and surface patterns of ferritin on the monolayers have been investigated using a combination of infrared reflection absorption spectroscopy, surface plasmon resonance, and atomic force microscopy. Ferritin binding to the binary monolayers at the air-water interface at the surface pressure 30 mN/m, primarily driven by the electrostatic interaction, gives rise to a change in tilt angle of hydrocarbon chains from 15 degrees +/- 1 degrees to 10 degrees +/- 1 degrees with respect to the normal of the monolayer at the mole fraction of DOMA (XDOMA) of 0.1. The chains at XDOMA = 0.3 are oriented vertical to the water surface before and after protein binding. A new mechanism for protein binding to the binary monolayers is proposed. The secondary structures of the adsorbed ferritin are prevented from changing to some extent due to the existence of the monolayers. The amounts of the bound protein on the monolayers at the air-water interface are increased in comparison with those on the pre-immobilized monolayers at low XDOMA. The increased amounts and different patterns of the adsorbed protein at the monolayers are mostly attributed to the formation of multiple binding sites available for ferritin, which is due to the lateral reorganization of the lipid components in the monolayers induced by the protein in the subphase. The created multiple binding sites on the monolayer surfaces through the protein-directed assembly can be preserved for subsequent protein binding.     

Structural and topographical characteristics of adsorbed WPI and monoglyceride mixed monolayers at the air-water interface

In this work we have analyzed the structural and topographical characteristics of mixed monolayers formed by an adsorbed whey protein isolate (WPI) and a spread monoglyceride monolayer (monopalmitin or monoolein) on the previously adsorbed protein film. Measurements of the surface pressure (pi)-area (A) isotherm were obtained at 20 degrees C and at pH 7 for protein-adsorbed films from water in a Wilhelmy-type film balance. Since the surface concentration (1/A) is actually unknown for the adsorbed monolayer, the values were derived by assuming that the A values for adsorbed and spread monolayers were equal at the collapse point of the mixed film. The pi-A isotherm deduced for adsorbed WPI monolayer in this work is practically the same as that obtained directly by spreading. For WPI-monoglyceride mixed films, the pi-A isotherms for adsorbed and spread monolayers at pi higher than the equilibrium surface pressure of WPI are practically coincident, a phenomenon which may be attributed to the protein displacement by the monoglyceride from the interface. At lower surface pressures, WPI and monoglyceride coexist at the interface and the adsorbed and spread pi-A isotherms (i.e., the monolayer structure of the mixed films) are different. Monopalmitin has a higher capacity than monoolein for the displacement of protein from the air-water interface. However, some degree of interactions exists between proteins and monoglycerides and these interactions are higher for adsorbed than for spread films. The topography of the monolayer corroborates these conclusions.     

Hydrogen-bonded monolayers and interdigitated multilayers at the air-water interface

Crystalline monolayers of octadecylsulfonate amphiphiles (C18S) separated by hydrophilic guanidinium (G) spacer molecules were formed at the air-water interface at a surface coverage that was consistent with that expected for a fully condensed monolayer self-assembled by hydrogen bonding between the G ions and the sulfonate groups. The surface pressure-area isotherms reflected reinforcement of this monolayer by hydrogen bonding between the G ions and the sulfonate groups, and grazing incidence X-ray diffraction (GIXD) measurements, performed in-situ at the air-water interface, revealed substantial tilt of the alkyl hydrophobes (t = 49 degrees with respect to the surface normal), which allowed the close packing of the C18 chains needed for a stable crystalline monolayer. This property contrasts with behavior observed previously for monolayers of hexadecylbiphenylsulfonate (C16BPS) and G, which only formed crystallites upon compression, accompanied by ejection of the G ions from the air-water interface. Upon compression to higher surface pressures, GIXD revealed that the highly tilted (G)C18S monolayer crystallites transformed to a self-interdigitated (G)C18S crystalline multilayer accompanied by a new crystalline monolayer phase with slightly tilted alkyl chains and disordered sulfonate headgroups. This transformation was dependent on the rate of compression, suggesting kinetic limitations for the "zipper-like" transformation from the crystalline monolayer to the self-interdigitated (G)C18S crystalline multilayer.     

Monoglycerides and beta-lactoglobulin adsorbed films at the air-water interface. structure, microscopic imaging, and shear characteristics

In this work we have analyzed the structural, topographical, and shear characteristics of mixed monolayers formed by adsorbed beta-lactoglobulin (beta-lg) and spread monoglyceride (monopalmitin or monoolein) on a previously adsorbed protein film. Measurements of the surface pressure (pi)-area (A) isotherm, Brewster angle microscopy (BAM), and surface shear characteristics were obtained at 20 degrees C and at pH 7 in a modified Wilhelmy-type film balance. The pi-A isotherm and BAM images deduced for adsorbed beta-lactoglobulin-monoglyceride mixed films at pi lower than the equilibrium surface pressure of beta-lactoglobulin (pi(e)(beta-lg)) indicate that beta-lactoglobulin and monoglyceride coexist at the interface. However, the interactions between protein and monoglyceride are somewhat weak. At higher surface pressures (at pi > or = pi(e)(beta-lg)) a protein displacement by the monoglyceride from the interface takes place. The surface shear viscosity (eta(s)) of mixed films is very sensitive to protein-monoglyceride interactions and displacement as a function of monolayer composition (protein/monoglyceride fraction) and surface pressure. Shear can induce change in the morphology of monoglyceride and beta-lactoglobulin domains, on the one hand, and segregation between domains of the film-forming components on the other hand. In addition, the displacement of beta-lactoglobulin by the monoglycerides is facilitated under shear conditions.     

Dense monolayers of metal-chelating ligands covalently attached to carbon electrodes electrochemically and their useful application in affinity binding of histidine-tagged proteins

In this work, monolayers of metal complexes were covalently attached to the surface of carbon electrodes with the goal of binding monolayers of histidine-tagged proteins with a controlled molecular orientation and a maintained biological activity. In this novel method, which is simple, versatile, and efficient, the covalent attachment was accomplished in a single step by the electrochemical reduction of aryl diazonium ions that were substituted with a nitrilotriacetic (NTA) or an imminodiacetic (IDA) ligand at the para position. The transient aryl radicals that were generated in the reduction were grafted to the surfaces of glassy carbon, highly oriented pyrolitic graphite, and graphite-based screen-printed electrodes, producing dense monolayers of the ligands. The NTA- and IDA-modified electrodes were shown to efficiently chelate Cu(II) and Ni(II) ions. The presence of the metal was established using X-ray photoelectron spectroscopy and electrochemistry. Surface coverages of the ligands were indirectly determined from the electroactivity of the copper(II) complex formed on the electrode surface. Studies on the effect of electrodeposition time and potential showed that, at sufficiently negative potentials, the surface coverage reached a saturating value in less than 2 min of electrodeposition time, which corresponds to the formation of a close-packed monolayer of ligand on the electrode surface. Once loaded with a metal ion, the modified electrode was able to bind specifically to histidine-tagged proteins such as the horseradish peroxidase (His-HRP) or to an enhanced, recombinant green-fluorescent protein via its N-terminal hexahistidine tail. In the case of His-HRP, the amount of active enzyme specifically immobilized by metal-chelating binding was determined from the analysis of electrocatalytic currents using cyclic voltammetry. The electrochemical grafting makes it possible to accurately controlled and electronically address the amount of deposited ligand on the conductive surfaces of carbon electrodes with any size and shape.