Determination of related impurities of bile acids in bulk drugs by cyclodextrin-modified micellar electrokinetic chromatography

A cyclodextrin-modified micellar electrokinetic chromatography (CD-MEKC) method has been developed and validated for purity determination of two bile acids, ursodeoxycholic acid (UDCA) and deoxycholic acid (DCA). Quantitation of related impurities such as lithocholic acid (LCA), chenodeoxycholic acid (CDCA), cholic acid (CA), and DCA in UDCA and CA in DCA was performed. A running buffer containing 20 mM borate-phosphate, 50 mM sodium dodecyl sulfate (SDS), 2.0 mM beta-cyclodextrin, and acetonitrile was used. Modifiers were added to improve resolution and selectivity. The applied voltage was 25 kV and detection was performed at 185 nm. Validation parameters such as selectivity, linearity, repeatability, intermediate precision, limit of detection, limit of quantitation, and robustness were evaluated. The method was simple and proved to be useful for the purity testing of bile acids in bulk drugs. Good results were obtained for related impurities at concentration levels from 0.05 to 1.5% with respect to the main component, according to international requirements.     

Determination of nikethamide by micellar electrokinetic chromatography

A simple, fast, sensitive and reproducible micellar electrokinetic chromatography (MEKC)–UV method for the determination of nikethamide (NKD) in human urine and pharmaceutical formulation has been developed and validated. The method exhibits high trueness, good precision, short analysis time and low reagent consumption. NKD is an organic compound belonging to the psychoactive stimulants used as an analeptic drugs. The proposed analytical procedure consists of few steps: dilution of urine or drug in distilled water, centrifugation for 2 min (12,000 g ), separation by MEKC and ultraviolet‐absorbance detection of NKD at 260 nm. The background electrolyte used was 0.035 mol/L pH 9 borate buffer with the addition of 0.05 mol/L sodium dodecyl sulfate and 6.5% ACN. Effective separation was achieved within 5.5 min under a voltage of 21 kV (~90 μA) using a standard fused‐silica capillary (effective length 51 cm, 75 μm i.d.). The determined limit of detection for NKD in urine was 1 μmol/L (0.18 μg/mL). The calibration curve obtained for NKD in urine showed linearity in the range 4–280 μmol/L (0.71–49.90 μg/mL), with R² 0.9998. The RSD of the points of the calibration curve varied from 5.4 to 9.5%. The analytical procedure was successfully applied to analysis of pharmaceutical formulation and spiked urine samples from healthy volunteers.     

胶束电动毛细管色谱法测定植物中的水杨酸

建立了以胶束电动色谱为分离模式测定植物中水杨酸的新方法。在一定范围内，随着硼酸和甲醇浓度的升高，苯甲酸内标和水杨酸的分离度以近似线性关系升高；随缓冲液pH的升高分离度呈非线性升高；随十六烷基三甲基溴化铵浓度的升高分离度呈非线性下降。在优化的条件下，两可在12min内分离。测定了苹果和梨样品，并做了回收率试验，回收率在97.1%-102%之间。     

Determination of amino acid ratios in natural products by micellar electrokinetic chromatography

Summary Separation of dansyl and di-dansyl derivatives of amino acids present in natural products (corn seed flour, wheat flour fraction gliadine) is described. Problems with coelution of derivatization by-products and reagent with some dansyl amino acids (DNS-AA) were solved. A preconcentration step after derivatization of real sample is described. DNS-AA peak areas for different varieties of corn seed flour were compared. Di-dansyl histidine is not separated from di-dansyl lysine and didansyl tyrosine. Additional separation mechanisms have to be introduced to achieve separation of these three species.     

On-line sample preconcentration in micellar electrokinetic chromatography using ion-pair reagents

To improve the detection sensitivity of some aromatic carboxylic acids and naphthalenesulfonic acids, the use of ion-pair reagents was examined in sweeping micellar electrokinetic chromatography (MEKC) with an anionic sodium dodecyl sulfate (SDS) micelle. Tetraalkylammonium (TAA) salts were used as ion-pair reagents to improve the sweeping efficiency. The effects of the alkyl chain length of the TAA groups and the TAA salt concentration on sweeping were examined. Under optimized conditions, about 400-fold enhancement in detection sensitivity was obtained in terms of peak heights by addition of ion-pair reagents in sweeping MEKC. This value was about 10 times greater than that obtainable by the SDS micelle used alone.     

Analysis of vancomycin and related impurities by micellar electrokinetic capillary chromatography. Method development and validation

A fast and highly selective micellar electrokinetic capillary chromatography (MEKC) method for quantitative analysis of vancomycin and related impurities is described. Among the tested surfactants, cetyltrimethylammonium chloride (CTAC) offered the best selectivity. Another important parameter, which strongly influenced the selectivity, was buffer pH. It was found that the selectivity increased with buffer pH decreasing from 9 to 5. Using Tris-phosphate buffer containing CTAC, satisfactory separation could be obtained in the pH range from 5.0 to 5.5. Excellent repeatability in terms of migration time and peak area could be obtained when the capillary was carefully washed between two runs. In order to obtain optimal conditions and to evaluate the method robustness, a central composite experimental design was carried out. The optimal conditions were: 44 cm length of fused-silica capillary with 50 microm ID, 120 mM Tris-phosphate buffer (pH 5.2) containing 50 mM CTAC, -15 kV applied voltage, UV detection at 210 nm, and a column temperature of 25 degrees C. Under the optimal conditions, more than 20 peaks could be separated within 8 min. The method has a linearity range from 0.004 to 1.2 mg/ml (concentration of vancomycin B, active component). The limit of detection (LOD) and limit of quantitation (LOQ) were 0.4 microg/mL vancomycin, equivalent to 0.3 microg/mL vancomycin B (0.04%) and 1.1 microg/mL vancomycin, equivalent to 0.9 microg/mL vancomycin B (0.1%), respectively.     

Determination of oleanolic acid and ursolic acid in cornel by cyclodextrin-modified micellar electrokinetic chromatography

A cyclodextrin-modified micellar electrokinetic chromatography (CD-MEKC) method was established for the determination of oleanolic acid and ursolic acid in cornel. The two components were separated in the running buffer of 40 mmol/L sodium borate containing 5% methanol, 25 mmol/L SDS and 15 mmol/L hydroxypropyl-beta-cyclodextrin (HP-beta-CD). The applied voltage was 24 kV. The wavelength of detection was 200 nm. The temperature was kept at 25 C. Cinnamic acid was used as the internal standard. The analytical performance of the method was tested with respect to linearity, precision and recovery. The calibration curves were linear in the range of 10.15-243.6 microg/mL, r=0.9993 (oleanolic acid) and 10.07-241.7 microg/mL, r=0.9994 (ursolic acid); the intra-day precision (RSD) was less than 3.7% (oleanolic acid) and 4.1% (ursolic acid); the inter-day precision (RSD) was less than 4.2% (oleanolic acid) and 4.9% (ursolic acid). The limits of detection were 1.6 microg/mL for both components. The method proved to be sensitive, rapid, accurate and suitable for the determination of oleanolic acid and ursolic acid in cornel.     

Determination of heterocyclic compounds by micellar electrokinetic capillary chromatography

Micellar electrokinetic capillary chromatography (MECC) based on sodium cholate (NaCh) and sodium dodecyl sulphate (SDS) was developed for the determination of aromatic amino acids and heterocyclic legume constituents. The influence of temperature, voltage, micellar system, pH, zwitterion and modifier concentrations in the buffer on migration times, peak areas, resolution and number of theoretical plates was investigated. This MECC method makes possible the sensitive determination of the individual compounds with detection limits in the picomole range. Up to 300 000 theoretical plates per metre of capillary were obtained together with satisfactory linearity and repeatability of the NaCh method. The applicability of MECC to samples prepared from plant material, following a fast and simple technique of isolation, purification and group separation, is illustrated by selected examples.     

Determination of plasma heparin by micellar electrokinetic capillary chromatography

The micellar electrokinetic capillary chromatography (MECC) method is reported for the separation of heparin, and for the possibility of direct determination of free heparin in plasma. The conditions for MECC were: pH 8.5, 25 mM sodium dodecyl sulfate (SDS), 25 mM borate buffer, with a 30 cmx50 mum ID fused-silica capillary. The sample was detected with a UV-detector at 270 nm with heparin as external standard. The recovery rate was 95.6-98.7%. This method was linear in the range 80-7000 U l(-1). The within-run and between-run relative standard deviations were lower than 3.1 and 4.5%, respectively. It is suggested that this MECC method may be used to determine blood samples containing high levels of heparin.     

Determination of synthesized alpha-vitamin E by micellar electrokinetic chromatography

We developed a micellar electrokinetic chromatography method (MEKC) for the direct determination of the content of synthesized alpha-vitamin E. It was found that under the optimum separation conditions 7 mM borate + 14 mM phosphate + 15 mM sodium dodecyl sulfate (SDS) + 10 mM sodium cholate (NaCh) + 8% acetonitrile (pH 9.2) with UV detection wavelength at 214 nm, 16 kV constant voltage, and 26 degrees C constant temperature, alpha-vitamin E and its isomers can be baseline separated and alpha-vitamin E was quantitatively analyzed. In addition, the sample recovery, the limit of detection and the repeatability of the method were investigated. The influence of various parameters on the separation such as SDS concentration, NaCh concentration, buffer pH and acetonitrile percentage were also discussed.     

Determination of 5-nitroimidazoles and metabolites in environmental samples by micellar electrokinetic chromatography

A method based on micellar electrokinetic chromatography (MEKC) with UV detection has been developed for the determination of nine 5-nitroimidazoles (5-NDZs), including metabolites in river water samples. Due to the relative insensitivity of UV detection in MEKC, a solid-phase extraction (SPE) method has been proposed that preconcentrates water samples fiftyfold and cleans them up off-line. An on-line preconcentration approach based on sweeping and the use of an extended light path fused-silica capillary (64.5?cm?×?50?μm i.d., 56?cm effective length) was also found to improve the sensitivity of the method. Separation was carried out in <21?min using 20?mM phosphate buffer (pH 6.5) and 150?mM SDS as the background electrolyte (BGE). The temperature of the capillary was kept constant at 20°C, a voltage of 25?kV was applied (normal mode), and a detected wavelength of 320?nm was utilized. Hydrodynamic injection (50?mbar for 15?s) of the samples, which were dissolved in 20?mM phosphate (pH 6.5), was employed. The limits of detection were lower than 1.1?μg?L(-1). Recoveries of >80% from spiked river water samples were obtained for most of the analytes at three different concentration levels with acceptable precision. This method could provide an efficient and economical alternative to the use of chromatographic methods to monitor nitroimidazole residues, thus supplementing the relatively few methods available for the analysis of these compounds in environmental samples.     

Determination of ferulic acid and adenosine in Angelicae Radix by micellar electrokinetic chromatography

A micellar electrokinetic chromatography for determining ferulic acid and adenosine in Angelicae Radix was developed. A buffer solution composed of 50 mmol L(-1) borax, 10 mmol L(-1) sodium deoxycholate, and 2% methanol was found to be the most suitable electrolyte for the separation. The contents of ferulic acid and adenosine in Angelicae Radix were determined within 20 min. Good linearity between peak area ratio and the concentration was found in the range of approximately 20-320 microg mL(-1) for ferulic acid and about 10-160 microg mL(-1) for adenosine ( r >0.998), respectively. The recoveries were approximately 96.8-97.4% and 93.2-95.0%, and the RSD of this proposed method were 4.4% and 3.2% for ferulic acid and adenosine, respectively ( n=5). The contents of ferulic acid and adenosine in Angelicae Radix from different sources were determined.     

Determination of alkylphenol ethoxylates by micellar electrokinetic chromatography with bile salts

Octyl- and nonylphenol ethoxylates (OPEs and NPEs) with different numbers of ethoxy units (average values: n = 10 and N = 40 for OPEs, and n = 10 for NPEs) were separated by micellar electrokinetic chromatography under positive polarity using an 80 mM borate buffer of pH 8.5 containing sodium deoxycholate (SDC) or sodium cholate (SC). When sodium dodecyl sulfate (SDS) was added to the background electrolyte (BGE) in the absence of the bile salt, a single peak at a migration time longer than that of the EOF was obtained. Substituting the SDS by a bile salt, the homologues were resolved. At the same bile salt concentration, resolution between the homologues was higher with SDC than using SC. Optimum resolution between consecutive homologues was obtained with 50 mM SDC. In the presence of low or moderate amounts of acetonitrile or n-propanol, the background line improved significantly, whereas resolution may increase or decrease slightly. We propose a procedure for the determination of OPEs and NPEs with optimum resolution between the homologues as well as a modified procedure with improved selectivity for the single-run determination of other absorbing nonionic, cationic, and anionic (such as linear alkylbenzene sulfonates) surfactants in industrial and household cleaning products and its application to a variety of samples. The detection limit was ca. 28 microg x mL(-1) of total NPE (n = 10), and peak area repeatabilities at 50 microg x mL(-1) were 1.7% (intraday) and 5.6% (interday).     

Determination of melamine and related triazine by-products ammeline, ammelide, and cyanuric acid by micellar electrokinetic chromatography

In this study, micellar electrokinetic chromatographic (MEKC) methods were developed for the detection of traces of melamine and its related by-products (ammeline, ammelide, and cyanuric acid). Two on-line sample concentration steps namely reversed electrode polarity stacking mode (REPSM) and cation-selective injection (CSI) were used for improving the detection sensitivity. For REPSM, a borate-NaOH buffer (pH 10, 35 mM) composed of 60 mM SDS and 10% (v/v) methanol, was used as carrier electrolyte, and samples were prepared in an aqueous solution of 10 mM NaOH. In CSI, a phosphate buffer (pH 2, 50 mM) containing 41 mM SDS was used as the carrier electrolyte, and samples were prepared with an aqueous solution of 10 mM NaOH and a phosphate buffer (pH 2.0, 25 mM) in a volume ratio of 1:9. The results indicated that REPSM enhanced all analyte signals except for melamine, which could be concentrated only by the CSI. The detection limit was reduced from 1.7 mg L⁻¹ to 2.8 μg L⁻¹ for melamine by the optimal CSI step, and from 0.23-1.2 mg L⁻¹ to 2.4-5.0 μg L⁻¹ for the other three analytes by the optimal REPSM step. Tableware made of melamine and samples of flour were used as test samples, and the results indicated that the proposed MEKC methods can successfully determine contaminations from melamine. The study also indicated that when the plastic made of melamine was exposed only once to an acidic solution (acetic or phosphoric acid) at 80 °C for 30 min, melamine continuously leached out from the test sample even without any further treatment with an acidic solution.     

Determination of steroids in biological samples by micellar electrokinetic chromatography

The possibility of determining eight adrenocorticotropic steroid hormones (cortisol, cortisone, corticosterone, 11-dehydrocorticosterone, 17-hydroxyprogesterone, 11-deoxycortisol, and progesterone) by micellar electrokinetic chromatography (MEKC) using urea as an organic additive to the working electrolyte (a 25 mM phosphoric acid solution and 10 mM sodium dodecyl sulfate) was demonstrated. The use of online preconcentration (stacking and sweeping) allowed us to lower the detection limit for steroids to ～3 ng/mL. The total analysis time was 15 min.     

Determination of thyreostatics in animal feed by micellar electrokinetic chromatography

The determination of the thyreostatics 2-thiouracil, its derivatives (4-methyl-2-thiouracil, 4-propyl-2-thiouracil and 4-phenyl-2-thiouracil) and methimazole in manufactured dried animal feed by micellar electrokinetic chromatography (MEKC) is described. A 99 +/- 5% extraction yield at the 20 micrograms g-1 level (n = 8) was achieved by shaking the milled fodder with methanol-1 M NaOH (80 + 20). Aliquots of the supernatant were injected in a 75 microns x 33.5 cm uncoated silica capillary using pressure; separation was performed at 23 degrees C with 15 kV (positive polarity) in a background electrolyte (BGE) containing 40 mM sodium dihydrogenphosphate, 50 mM sodium dodecyl sulfate and 15 mM Tween 20 at pH 9. When the surfactants were added to the BGE, all the thyreostatics were well resolved and the fodder extracts showed lower backgrounds. The peaks appeared within the 2.25-5.2 min range with efficiencies in the 2.5 x 10(4)-8 x 10(4) range; methimazole appeared in the vicinity of the electroosmotic migration time. Calibration curves were linear within the studied range (20-200 micrograms ml-1, r2 > 0.998). Limits of detection in the extracts of spiked fodder samples ranged from 0.25 to 0.4 microgram ml-1, which corresponded to 0.6-1.0 microgram of drug per gram of fodder. Peak area repeatabilities were about 4% at the 20 micrograms ml-1 level.     

Determination of the chiral and achiral related substances of methotrexate by cyclodextrin-modified micellar electrokinetic chromatography

A cyclodextrin-modified micellar electrokinetic chromatographic (CD-MEKC) method for the determination of the most important potential impurities of methotrexate (MTX): 2,4-diamino-6-(hydroxymethyl)pteridine, aminopterine hydrate, 4-[N-(2-amino-4-hydroxy-6-pteridinylmethyl)-N-methylamino] benzoic acid, 4-[N-(2,4-diamino-6-pteridinylmethyl)-N-methylamino] benzoic acid, and the distomer D-MTX is presented. The MEKC separation of these compounds was optimized by applying a step-by-step approach. The addition of beta-CD to a conventional MEKC system, based on sodium dodecyl sulfate (SDS) as surfactant, showed to be essential for the enantioresolution of racemic MTX as well as for the separation of the achiral impurities. To achieve high-resolution factor between the peaks adjacent to the main component (L-MTX), as required in the analysis of related impurities, the separation conditions were stressed; in particular, the addition of methanol to the CD-MEKC system resulted in a very effective choice. Under the optimized final conditions (100 mM SDS and 45 mM beta-CD in a mixture of 50 mM borate buffer, pH 9.30-methanol (75:25 v/v)), the method was validated showing a general adequate accuracy (93-106% recovery) in the determination of L-MTX related substances at the impurity level of 0.12% w/w with a relative standard deviation (RSD)% lower than 8% (n = 4). The method was successfully applied to the analysis of pharmaceuticals (tablets and injections) which showed to contain the distomer D-MTX as major impurity and aminopterine hydrate as a further related substance in the commercial tablets.     

场放大进样-胶束扫集毛细管电脉法测定痕量泼尼松

建立了胶束毛细管电动色谱在线富集技术测定药品中痕量的泼尼松的方法。在胶束扫集的基础上联用场放大进样,使泼尼松的富集倍数提高了136倍;检出限由原来的2.7mg/L降至20μg/L。胶束扫集毛细管电泳缓冲体系为120mmol/LSDS、10mmol/LNaH2PO4(pH2.5)10%乙腈(V/V)。分离电压-20kV,进样电压-20kV,进样时间70s,进水时间180s,检测波长250nm。同时讨论了SDS浓度、样品基质pH、进样电压、进水时间和进样时间对分离效果的影响。实验结果显示:在优化实验条件下,样品的检测仅需8min,泼尼松在0.05～10mg/L的范围内线性关系良好(r=0.998)。回收率在89.4%～106%之间,相对标准偏差在2.1%～2.6%之间,可用于各种中药制剂中泼尼松的含量测定。     

Determination of 20-hydroxyecdysone content by thin-layer chromatography and micellar electrokinetic chromatography

Summary Seasonal dependence of 20-hydroxyecdysone content ofSerratula tinctoria andSerratula wolffii (Asteraceae) was investigated by micellar electrokinetic chromatography (MEKC). Samples were collected each month through the vegetation period. The leaves were dried, milled and extracted with methanol. Clean-up of the extracts was by solid-phase extraction using a polyamide micro-column to remove flavonoids and other plant phenolics which can interfere with the analysis. This work deals with the separation of 20-hydroxyecdysone from polypodine B and the seasonal variation of 20-hydroxyecdysone concentration. Determinations have been performed by both thin-layer chromatography and capillary electrophoresis using micellar electrokinetic chromatography. Presented at: Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 3–5, 1997.