Synthesis and liquid crystal properties of a novel family of oligothiophene derivatives

In order to develop novel oligothiophene-based liquid crystals capable of hydrogen bonding, new terthiophene derivatives containing an alkylamide group, N,N′-dialkyl-5,5″-dichloro-2,2′:5′,2″-terthiophene-4,4″-dicarboxamide (DNC_nDCl3T, n=8, 18), N,N′-dialkyl-5,5″-dibromo-2,2′:5′,2″-terthiophene-4,4″-dicarboxamide (DNC_nDBr3T, n=5, 8, 16, 18), or N,N′-dialkyl-5,5″-diiodo-2,2′:5′,2″-terthiophene-4,4″-dica-rboxamide (DNC_nDI3T, n=8, 18), were designed and synthesized, and their thermal behaviour was examined. It was found that DNC₁₈DCl3T, DNC₁₈DI3T and DNC_nDBr3T (n=8, 16, 18) form a smectic A phase and that the alkyl chain length greatly affects liquid crystal phase formation. The absence of liquid crystallinity in the corresponding ester derivatives suggests that intermolecular hydrogen bonding also plays a role in the formation of a liquid crystal phases in the DNC_nDBr3T system.     

Synthesis of B-trisubstituted borazines via the rhodium-catalyzed hydroboration of alkenes with N,N′,N″-trimethyl or N,N′,N″-triethylborazine

Hydroboration of terminal and internal alkenes with N,N′,N″-trimethyl- and N,N′,N″-triethylborazine was carried out at 50 °C in the presence of a rhodium(I) catalyst. Addition of dppb or DPEphos (1 equiv.) to RhH(CO)(PPh₃)₃ gave the best catalyst for hydroboration of ethylene at 50 °C, resulting in a quantitative yield of B,B′,B″-triethyl-N,N′,N″-trimethylborazine. On the other hand, a complex prepared from (t-Bu)₃P (4 equiv.) and [Rh(coe)₂Cl]₂ gave the best yield for hydroboration of terminal or internal alkenes.     

Heavier alkali metal complexes of the bulky alkyl ligand 2-(bis(trimethylsilyl)methyl)-6-methylpyridine: Crystal structures of [{6-Me(2 Pyr)}(Me3Si)2CNa(pmdta)] and [{6-Me(2-Pyr)}(Me3Si)2CK]∞

Reaction of the bulky pyridyl based ligand 6-Me(2-Pyr)(Me₃Si)₂CH with ⁿBuM (M = Na, K) in the presence of the N donors pmdta (N,N′,N′,N″,N″ pentamethyldiethylenetriamine) and tmeda (N,N,N′,N′ tetramethylethylenediamine) resulted in the formation and crystallisation of the heavy alkali metal complexes, [{6-Me(2-Pyr)}(Me₃Si)₂CNa(pmdta)], 1, and [{6-Me(2-Pyr)}(Me₃Si)₂CK]_∞, 2. Single crystal X-ray diffraction studies show the sodium complex, 1, to be monomeric with a six coordinate metal centre, while the unsolvated potassium complex, 2, is polymeric, involving repeating η³ 1-aza-allyl and allylic interactions of the pyridyl moiety with the potassium cation.     

Unexpected formation of the copper(II) dinuclear mixed-ligand species in the ternary system of N,N,N′,N″,N″-pentamethyldiethylenetriamine with methionine- or histidinehydroxamic acids in aqueous solution

Equilibrium studies of the mixed-ligand complexes of the copper(II) ion with pentamethyldiethylenetriamine (N,N,N′,N″,N″-pentamethyl-[bis(2-aminoethyl)amine], Me₅dien) as a primary ligand and methioninehydroxamic acid (2-amino-4-(methylthio)butanehydroxamic acid, Metha) or histidinehydroxamic acid (2-amino-3-(4′-imidazolyl)propanehydroxamicacid, Hisha) as a secondary ligand L were performed by potentiometric titration, UV–Vis and EPR spectroscopy. The results show that in these ternary systems the dinuclear [Cu₂(Me₅dien)L₂H₋₁]⁺ mixed-ligand species is formed as a predominant one in the basic solution. The monouclear [Cu(Me₅dien)L]⁺ species is formed in low concentration. Our spectroscopic results indicate that the geometry of these mixed-ligand five-coordinate complexes is strongly distorted towards trigonal-bipyramidal.     

Synthesis, structures and electrochemical properties of ruthenium (II) complexes bearing bidentate 1,8-naphthyridine and terpyridine analogous (N,N,C)-tridentate ligands

1,8-Naphthyridine (napy) and terpyridine-analogous (N,N,C) tridentate ligands coordinated ruthenium (II) complexes, [RuL(napy-κ²N,N′) (dmso)](PF₆)₂ (1: L=L¹=N″-methyl-4′-methylthio-2,2′:6′,4″-terpyridinium, 2: L = L² = N″-methyl-4′-methylthio-2,2′:6′,3″-terpyridinium) were prepared and their chemical and electrochemical properties were characterized. The structure of complex 1 was determined by X-ray crystallographic study, showing that it has a distorted octahedral coordination style. The cyclic voltammogram of 1 in DMF exhibited two reversible ligand-localized redox couples. On the other hand, the CV of 2 shows two irreversible cathodic peaks, due to the Ru-C bond of 2 containing the carbenic character. The IR spectra of 1 in CO₂-saturated CH₃CN showed the formation of Ru-(η¹-CO₂) and Ru-CO complexes under the controlled potential electrolysis of the solution at −1.44 V (vs. Fc/Fc⁺). The electrochemical reduction of CO₂ catalyzed by 1 at −1.54 V (vs. Fc/Fc⁺) in DMF-0.1 M Me₄NBF₄ produced CO with a small amount of HCO₂H.     

Characterization and optimization of poly(glycidyl methacrylate-co-styrene) synthesized by atom transfer radical polymerization

Styrene (S) and glycidyl methacrylate (GMA) copolymers were synthesized by atom transfer radical polymerization (ATRP) under different conditions. The effect of initiators, ligands, solvents, and temperature to the linear first-order kinetics and polydispersity index (PDI) was investigated for bulk polymerization. First-order kinetics was observed between linearly increasing molecular weight versus conversion and low polydispersities (PDI) were achieved for ethyl 2-bromo isobutyrate (EBiB) as an initiator and N,N′,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA)/CuBr as a catalyst. The copolymers with different compositions were synthesized using different in-feed ratios of monomers. Copolymers composition was calculated from ¹H NMR spectra which were further confirmed by quantitative ¹³C{¹H} NMR spectra. The monomer reactivity ratios were obtained with the help of Mayo-Lewis equation using genetic algorithm method. The values of reactivity ratios for glycidyl methacrylate and styrene monomers are r_G = 0.73 and r_S = 0.42, respectively.     

Efficient synthesis of N,N′-dialkyl-N″-dialkylaminocarbothioyl thioureas from cyclic secondary amines, CS2, and N,N′-dialkyl carbodiimides in water

A mild, convenient, and practical one-pot procedure for direct synthesis of N,N′-dialkyl-N″-dialkylaminocarbothioyl thioureas is described via three-component reaction of cyclic secondary amines, CS₂, and N,N′-dialkyl carbodiimides in water at room temperature.     

Controlled vinyl-addition-type polymerization of norbornene initiated by several cobalt complexes having substituted terpyridine ligands

A series of cobalt(II) complexes having terpyridine derivatives such as 2,2^′:6^′,2″-terpyridine (1), 4,4^′,4″-^tBu₃-2,2^′:6^′,2″-terpyridine (2), 5,5″-Me₂-2,2^′:6^′,2″-terpyridine (3), 6,6″-Me₂-2,2^′:6^′,2″-terpyridine (4) and 6,6″-(3,5-Me₂C₆H₃)₂-2,2^′:6^′,2″-terpyridine (5) was synthesized. The structures of 1, 3, and 4 were confirmed by X-ray crystallography. The coordination sphere around the cobalt center in 1 can be described as pseudo square pyramidal. On the other hand, complex 4 has pseudo trigonal bipyramidal structure. Upon activation with d-MAO (dried-methylaluminoxane), these complexes showed high activities for the polymerization of norbornene (NBE). In particular, polymerization of NBE with 4/d-MAO system at room temperature resulted in quantitative yield within several hours to give the polymers with relatively narrow molecular weight distributions and controlled molecular weight. The polymerizations of NBE with these cobalt catalyst systems proceeded in vinyl addition polymerization, which was confirmed by ¹H NMR spectra of the resulting polymers.     

Sulfide oxygenation by tert-butyl hydroperoxide with mononuclear (Me3TACN)Mn catalysts

Mononuclear (Me₃TACN)MnX₃ compounds, where X is Cl⁻, Br⁻, or N₃⁻, and Me₃TACN is 1,4,7-N,N′,N″-trimethyl-1,4,7-triazacyclononane, have been tested for catalyzing both sulfide oxygenation and styrene epoxidation by tert-butyl hydroperoxide (TBHP) and display turnover frequencies (TOF) up to 200 h⁻¹ at room temperature. Sulfoxides or sulfones may be produced selectively by varying reaction conditions. Product distribution from the oxygenation reactions of ethyl phenyl sulfide, 2-chloroethyl phenyl sulfide, and styrene is consistent with a mechanism involving an early single-electron transfer (SET) step.     

Atom transfer radical polymerization of styrene initiated by triphenylmethyl chloride

Triphenylmethyl chloride (TPMCl) was employed for the first time as the initiator of atom transfer radical polymerization (ATRP) of styrene in the presence of CuCl/N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA) as catalyst and cyclohexanone as solvent. The kinetic plot was first-order with respect to monomer. A linear increase of number average molecular weight (M_n) vs. monomer conversion was observed, and the molecular weight distribution (MWD) was relatively narrow (M_w/M_n = 1.2-1.5). ¹H NMR spectra revealed the ω-Cl group at the chain end. Another two initiators, benzyl chloride (BzCl) and diphenylmethyl chloride (DPMCl), were also employed in contrast with triphenylmethyl chloride to investigate the influence of phenyl numbers on the polymerization.     

Stabilities and coordination modes of histidine in copper(II) mixed-ligand complexes with ethylenediamine,diethylenetriamine or N,N,N′,N″,N″-pentamethyldiethylenetriamine in aqueous solution

Solution equilibrium studies on the Cu(II)–polyamine–histidine ternary systems (polyamine: ethylenediamine (en), diethylenetriamine (dien), N,N,N′,N″,N″-pentamethyldiethylenetriamine (Me₅dien)) have been performed by pH-potentiometry, UV–Vis spectrophotometry and EPR methods. The obtained results suggest the formation of the mixed-ligand complexes with [Cu(A)(His)]⁺ stoichiometry in all studied systems. Additionally, in the systems with dien and Me₅dien protonated [Cu(A)(H–His)]²⁺ species also exists in acid solution. Our spectroscopic results indicate the tetragonal geometry for the [Cu(en)(His)]⁺, the geometry slightly deviated from square pyramidal for the [Cu(dien)(His)]⁺ and strongly deviated from square pyramidal towards trigonal bipyramidal for the [Cu(Me₅dien)(His)]⁺ species. The coordination modes in these mixed-ligand complexes are discussed.     

Spectroscopic and structural characterization of Na2[(VO)2(ttha)]·8H2O (ttha = triethylenetetraamine-N,N,N′,N″,N′″,N′″-hexaacetate): Interpreting the results with density functional theory

Na₂[(V^IVO)₂(ttha)]·8 H₂O (ttha = triethylenetetraamine–N,N,N′,N″,N′″,N′″–hexaacetate ion), prepared by treating [VO(H₂O)₅][(VO)₂(ttha)]·4 H₂O with Na₆(ttha), has been characterized by single crystal X-ray diffraction, infrared spectroscopy, UV–Vis absorption spectroscopy, electron spin resonance spectroscopy, and modeled by density functional theory (DFT). The X-ray structure revealed a distorted octahedral geometry around each vanadium center. The electronic absorption spectrum of [(VO)₂(ttha)]²⁻ (aq) features absorptions at ca. 200 nm (ε > 13900 L mol⁻¹ cm⁻¹), 255 nm (ε = 3480 L mol⁻¹ cm⁻¹), 586 nm (ε = 33 L mol⁻¹ cm⁻¹), and 770 nm (ε = 38 L mol⁻¹ cm⁻¹). The time-dependent density functional theory (TDDFT) calculated electronic absorption spectrum was remarkably similar to the actual spectrum, and TDDFT predicts absorption peaks at 297, 330, 458, 656, and 798 nm. TDDFT assigned the peak at 798 nm to be the α spin HOMO → LUMO transition. Hence, the peak at 770 nm in the actual spectrum is most likely the α spin HOMO → LUMO transition. Moreover, the TDDFT calculations revealed that the α spin HOMO and LUMO are partly comprised of d orbitals on both vanadium centers, and the first derivative electron spin resonance spectrum also suggests that the two unpaired electrons in [(VO)₂(ttha)]²⁻ are localized near the vanadium centers.     

Rearrangements in the Scholl oxidation: implications for molecular architectures

Rearrangements readily occur in Scholl oxidations and interfere with the construction of certain molecular architectures. 3,3?,4,4′,4″,4?,5′,5″-Octamethoxy-1,1′,2′,1″,2″,1?-quaterphenyl and 3,3?,4,4′,4′′,4?,5′,5′-octamethyl-1,1′,2′,1″,2″,1?-quaterphenyl, which were conceived as precursors to benzenoid strips, rearranged under Scholl conditions to the unexpected C_2v-substituted products 1,2,5,6,9,10,12,13-octamethoxydibenzo[fg,op]naphthacene and 1,2,5,6,9,10,12,13-octamethyldibenzo[fg,op]naphthacene. This corrects a widely propagated error in the literature in which the assignments of 1,2,5,6,9,10,12,13-octamethoxydibenzo[fg,op]naphthacene (C_2v) and 1,2,5,6,8,9,12,13-octamethoxydibenzo[fg,op] naphthacene (C_2h) are crossed. A mechanism involving the migration of an aryl ring on an arenium cation intermediate is proposed.     

New soluble aromatic polyamides containing ether linkages and laterally attached p-terphenyls

Two series of new polyamides containing flexible ether linkages and laterally attached side rods (3a-i and 4a-i) were synthesized from 2^′,5^′-bis(4-aminophenoxy)-[1,1^′;4^′,1^″]terphenyl (1a) and 2^′,5^′-bis(4-amino-2-trifluoromethylphenoxy)-[1,1^′;4^′,1^″]terphenyl (1b), respectively, with various aromatic dicarboxylic acids by the direct phosphorylation polycondensation. The polymers were produced with high yields and moderate to high inherent viscosities (0.41-0.97 dl/g) that corresponded to weight-average molecular weights (by size exclusion chromatography) of 47,000-65,000. Except for some polyamides that derived from rigid diacids, the obtained polyamides were readily soluble in aprotic polar solvents, such as N-methyl-2-pyrrolidone (NMP) and N,N-dimethylacetamide (DMAc), and could afford flexible and tough films via solvent casting. The polymer films cast from DMAc solutions possessed tensile strengths of 85-106 MPa and initial moduli of 1.82-2.96 GPa. These polyamides showed glass-transition temperatures (T_g) in the range of 206-263 °C (by DSC) and softening temperatures (T_s) in the range of 211-253 °C (by TMA). Decomposition temperatures (T_d) for 10% weight loss all occurred above 400 °C (by TGA) in both nitrogen and air atmospheres. The polyamides 4a-i derived from trifluoromethyl-substituted diamine 1b generally showed a higher solubility, T_g and T_s but lower thermal stability as compared to the analogous polyamides 3a-i based on diamine 1a.     

Optically active pentacyclic binuclear diorganotin compounds

Three optically active binuclear diorganotin compounds (2-4) were prepared from an optically active oxalamide: (1S,2R)-(−)-[N-(2-hydroxy-1-methyl-2-phenyl-ethyl)-N′-(2-hydroxy-phenyl)-oxalamide (1). The new compounds [1-(2′,2′-diorganyl-1′-oxa-3′-aza-2′-stanna-indan-3′-yl)-2-(2″,2″-diorganyl-4″-methyl-5″-phenyl[1,3,2]-oxazastannolidin-3″-yl)-ethane-1,2-dione {organyl = methyl (2), n-butyl (3) or phenyl (4)} were characterized by IR, elemental analysis and mass spectrometry. Compounds 3 and 4 were submitted to a detailed NMR study in order to assign their resonances (¹H and ¹³C) and specially the two different ¹¹⁹Sn signals for each compound. The X-ray diffraction analysis of compound 4 showed a planar pentacyclic framework with two penta-coordinated tin atoms with a distorted tbp geometry and 12 intramolecular hydrogen bonds.     

The high affinity of azacalix[3](2,6)pyridine derivatives for Be cations—a DFT study

It is shown using a reliable DFT method that N,N′,N″-tris(phenyl)azacalix[3](2,6)pyridine derivatives act as powerful sequestering agents for Be²⁺ cations in the gas phase and in acetonitrile solution due to cationic resonance and strong beryllium bonding in the complexes.     

Facile oxygenation of organic sulfides with H2O2 catalyzed by Mn-Me3TACN compounds

Two binuclear Mn-Me₃TACN (Me₃TACN is 1,4,7-N,N′,N″-trimethyl-1,4,7-triazacyclononane) compounds catalyze the oxygenation of organic sulfides utilizing H₂O₂ under ambient conditions. Both phenyl sulfide and ethyl phenyl sulfide were converted to the corresponding sulfones and chloroethyl phenyl sulfide proceeds to its elimination product of phenyl vinyl sulfone.     

Synthesis and nonlinear optical properties of new symmetrically substituted stilbenes

Three new chromophores and trans-4-(N-(ethyl 4″-nitrobenzoate)-N-ethyl amino)-4′-(dimethyl amino) stilbene (DMANHAS) have been synthesized and whose chemical structures have been characterized by ¹H NMR, IR, and elemental analyses. Linear absorption, single-photon-induced fluorescence and two-photon-induced fluorescence are experimentally studied. Trans-4-(N-2-hydroxyethyl-N-ethyl amino)-4′-(dimethyl amino)stilbene (DMAHAS) and trans-4-(N-2-hydroxyethyl-N-ethyl amino)-4′-(diethyl amino)stilbene (DEAHAS) have effective two-photon absorption cross-sections of σ₂=0.91×10⁻⁴⁶ cm⁴ s/photon and σ₂=1.19×10⁻⁴⁶ cm⁴ s/photon at 532 nm by using an open aperture Z-scan technique, respectively. When pumped with 800 nm laser irradiation, DMAHAS and DEAHAS indicate strong two-photon-induced blue fluorescence of 436 and 440 nm, respectively, while trans-4-(N-(ethyl 4″-nitrobenzoate)-N-ethyl amino)-4′-(diethyl amino) stilbene (DEANHAS) and DMANHAS exhibit no fluorescence.     

Cobalt complexes of a selenium diimide and a tellurium diimide dimer

[CoCl₂{N,N′-Te₂(N^tBu)₄}] (1) was obtained in good yields by the reaction of equimolar amounts of (^tBu)NTe(μ-N^tBu)₂TeN(^tBu) and CoCl₂ in toluene under an argon atmosphere. The crystal structure of 1·CH₂Cl₂ showed that the dimeric tellurium diimide ligand is N,N′-chelated to cobalt. The related reaction of Se(N^tBu)₂ and CoCl₂ affords a green product tentatively identified as a 1:1 adduct [CoCl₂{N,N′-Se(N^tBu)₂}] (CHN analysis). However, recrystallization from thf produces the ion-separated complex [Co₂(μ-Cl)₃{N,N′-Se(N^tBu)₂}₂(thf)₂][CoCl₃{NH₂(^tBu)}]·1½thf (2·1½thf), in which the monomeric selenium diimide ligand is N,N′-chelated to cobalt in the cation. A pathway for the formation of 2 from [CoCl₂{N,N′-Se(N^tBu)₂}] in thf is proposed.