Effect of isocyanate structure on deblocking and cure reaction of N-methylaniline-blocked diisocyanates and polyisocyanates

Two series of N-methylaniline-blocked isocyanates based on monomeric diisocyanates such as 4,4′-methylene bis(phenyl isocyanate), toluene-2,4-diisocyanate, isophorone diisocyanate and 1,6-diisocyanato hexane and their NCO terminated polyurethane prepolymer (polyisocyanates) were prepared and characterized thoroughly by FTIR, ¹H NMR, ¹³C NMR and EI-Mass spectroscopic methods. The blocking reaction of N-methylaniline with aromatic isocyanates and aromatic polyisocyanates occur faster when compared to the aliphatic isocyanates. The deblocking reactions of blocked isocyanates were carried out under dynamic and isothermal conditions using hot-stage FTIR spectrophotometer. The dynamic method was used to determine the deblocking temperature, and the isothermal method was used to calculate kinetics and thermodynamics parameters. Cure reactions of blocked isocyanates with hydroxyl-terminated polybutadiene were also followed to establish the structure-property relationship of the N-methylaniline-blocked isocyanates. The deblocking studies of blocked isocyanates reveal that the aromatic isocyanates undergo deblocking easily compared to aliphatic isocyanates. The rate of deblocking reaction of N-methylaniline-blocked aromatic polyisocyanates was found to be higher compared to N-methylaniline-blocked aromatic monomeric diisocyanate adducts. On the other hand, this trend was just reverse in the cure-reaction studies. The dissolution behavior of N-methylaniline-blocked isocyanates in Terathane-2000, polypropylene glycol-2000, polycaprolactone diol-2000 and hydroxyl-terminated polybutadiene-2500 was also studied and found that all adducts are soluble in these polyols.     

Application of tryptamine as a derivatising agent for airborne isocyanate determination. Part 3. Evaluation of total isocyanates analysis by high-performance liquid chromatography with fluorescence and amperometric detection

Determination of total airborne isocyanates using tryptamine as the derivatising agent was investigated. Tryptamine derivatised isocyanates were analysed by reversed-phase high-performance liquid chromatography (HPLC). The column was equipped with dual detectors of fluorescence emission and amperometric oxidation. The characteristics of fluorescence emission and amperometric oxidation of tryptamine were retained even after its reaction with isocyanates. With this unique behaviour, all tryptamine derivatised isocyanates can be quantified using HPLC by employing a single, pure derivative, such as tryptamine derivatised hexamethylene diisocyanate as the calibration standard. This is especially important for analysing polymeric isocyanates when identical calibration standards are not always available. The applicability of this method for air sampling was evaluated by comparison with the established method of Bagon et al. involving 1-(2-methoxyphenyl)piperazine. Simulation of air sampling was performed in a Test Atmosphere Generation System by the vaporisation of toluene diisocyanate. Satisfactory results were obtained, indicating the applicability of this technique for the determination of total airborne isocyanates.     

Untersuchungen in der thiazolreihe—IV : Umsetzung von 2-aminothiazol-3-oxiden mit acylierungsmitteln. Ein beitrag zur ambivalenz nucleophiler verbindungen

2-Amino-4-methylthiazol-3-oxide 5 is reacted with isocyanates and with acid chlorides. Aliphatic isocyanates attack the 5-position aromatic isocyanates, however, attack the N-oxide-oxygen of the heterocyclic ring. Acid chlorides react with 5 giving reactive N-acylammonium salts which can be isomerisized by bases. As with isocyanates differences of the individual acid chlorides can be observed: with aromatic acid chlorides substitution occurs in the 5-position, and with aliphatic compounds acylation is obtained at the exocyclic nitrogen. The results obtained are interpreted by simple MO-models.     

Iridium-catalyzed [2+2+2] cycloaddition of α,ω-diynes with isocyanates

[Ir(cod)Cl](2)/BINAP was found to be an efficient catalyst for the [2+2+2] cycloaddition of α,ω-diynes with isocyanates to give 2-pyridones. A wide range of isocyanates can be used for this reaction. Both aliphatic and aromatic isocyanates smoothly reacted with α,ω-diynes to give 2-pyridones in high yields. Aliphatic isocyanates were more reactive than aromatic isocyanates. For aromatic isocyanates, the electronic properties of the substituents affected the reactivity: electron-donating substituents enhanced the reaction. The reaction of unsymmetrical α,ω-diynes possessing two different internal alkyne moieties with isocyanates was regiospecific and gave a single product. This regioselectivity could be explained by the reaction of iridacyclopentadiene with a nitrogen-carbon double bond. The regioselectivity of the reaction of malonate-derived diyne was controlled by a steric effect, while that of the reaction of ester-tethered diyne was controlled by an electronic effect. [Ir(cod)Cl](2)/chiral diphosphine catalyst could be used for the enantioselective synthesis of C-N axially chiral 2-pyridone. The reaction of diyne 1a with o-methoxyphenyl isocyanate (7a) gave C-N axially chiral 2-pyridone (R)-8aa in 78% yield with 94% ee.     

Pyrazoles—A novel class of blocking agents for isocyanates

Pyrazoles were found as a novel class of blocking groups for isocyanates. Adhesive mixtures of pyrazole blocked isocyanates and amine terminated prepolymers like Jeffamines® (Texaco Chem. Co.) combine excellent reactivities (gelation times within minutes at 100–120°C), good latencies (more than 170 days at 40°C), and good adhesion properties on many substrates. The reactivity of pyrazole blocked isocyanates toward nucleophiles increases with the number of electron donor substituents on the pyrazole nucleus and, thus, can be fine tuned by the appropriate substitution pattern. This behavior contrasts sharply with that of phenolic blocked isocyanates, where reactivities with the same nucleophiles decrease with more and stronger electron donor substituents on the phenol nucleus. Therefore, different deblocking reaction mechanisms were proposed for pyrazole vs. phenol blocked isocyanates. The excellent latency of pyrazole blocked isocyanate/Jeffamine® mixtures is due to the insolubility of the two components at ambient temperature and the slow endothermic dissolution process at higher temperature. The good adhesion of formulations with pyrazole blocked isocyanates as reactive components on most plastic and metal substrates is ascribed to the primer action of the released blocking group. © 1994 John Wiley & Sons, Inc.     

Phosphorus isocyanates

Compounds containing the PNCO grouping can be obtained e.g. from phosphorus halides and silver cyanate or esters of N-chloroiminocarbonic acid and by thermal decomposition of alkoxycarbonylimino-phosphoranes. The phosphorus (V) isocyanates resemble the “carbon” isocyanates in their chemical properties, whereas the phosphorus (III) isocyanates resemble the phosphorus (III) chlorides. Some of the compounds discussed have insecticidal or cytostatic actions.     

Isocyanates of N alpha-[(9-fluorenylmethyl)oxy]carbonyl amino acids: synthesis,isolation, characterization,and application to the efficient synthesis of urea peptidomimetics

The Curtius rearrangement of Fmoc-amino acid azides 1 was carried out in toluene by refluxing the solution for 30 min. The resulting isocyanates 2 have been isolated as crystalline solids and are fully characterized by IR, (1)H NMR, (13)C NMR, and mass spectra. They are found to be stable for several months when stored at 4 degrees C. The acyl azides of Asp, Glu, Ser, Tyr, and Lys with side-chain protection having tert-butyl, benzyl, and Boc groups were also converted to the corresponding isocyanates 2h-m. The rearrangement of Fmoc-amino acid azides in toluene to isocyanates 2 under microwave irradiation was also accomplished. The direct exposure of solid azides to microwaves for 60 s led to the completion of the rearrangement. The resulting isocyanates, after recrystallization, were found to be analytically pure. The scale-up of the rearrangement, under microwave irradiation as tested up to 0.75 mol, posed no problems and led to the isolation of the isocyanates in 91-96% yield. The utility of isocyanates as building blocks in the synthesis of urea peptides 4 is demonstrated. Further, the coupling of isocyantes 2 directly with N,O-bis(trimethylsilyl) derivatives of amino acids 6 resulted in urea peptide acids 7 with good yield in high purity. Thus, the synthesis of urea peptide acids 7d-g containing Asp, Glu, Ser, and Tyr with a free side-chain functional group have been carried out.     

Determination of airborne isocyanates

Isocyanates are important in industrial hygiene and workplace monitoring. Owing to their severe acute toxicity and sensitizing properties, analytical methods with high sampling efficiency and sensitivity in the low ppb to ppt range are required. The reactivity of isocyanates necessitates initial derivatization with nucleophilic agents—usually amines—for stabilization and enrichment; this is often followed by chromatographic separation with spectroscopic, electrochemical, or mass spectrometric detection. Sampling strategies for airborne isocyanates comprise active, i.e. pumped, or passive, i.e. diffusive, methods; the method selected depends on the application. Whereas active methods rely mainly on impingers, reagent-coated filters, or sampling tubes, passive samplers make use of reagent-coated filters, the surface of which is connected to the air sample by diffusion channels. Because airborne isocyanates are prone to occur in different forms, i.e. as vapors, as aerosols, or adsorbed on particulate matter, denuder sampling has been introduced, thus enabling simultaneous collection of gaseous and aerosol isocyanates. The first part of this review summarizes chemical methods and reagents which have been introduced for derivatization of airborne isocyanates. The advantages and drawbacks of the individual derivatization procedures and their combination with different detection principles are evaluated. In the second part, the most recent developments in air sampling for isocyanates, with special focus on diffusive sampling, are reviewed and critically discussed.     

Condensation of acyl chloride on sodium cyanate : preparation of acyl isocyanates

The catalytic effects of various metal halides and solvents on the reaction of benzoyl chloride with sodium cyanate were studied. It has been found that SnCl₄, and ZnCl₂. catalyze the reaction to give the corresponding acyl isocyanates in good yields. The scope of the reaction was studied and a number of aroyl isocyanates and their derivatives were prepared. A few non aromatic isocyanates and their derivatives were also prepared.     

Acylation of alkylidenepyrrolidines with heterocumulenes—a reinvestigation

The reactions of alkylidenepyrrolidine esters with isocyanates generally favour C-acylation, except in the case of benzyl isocyanate. Reactions with alkyl isocyanates are slow, and require forcing conditions. Reactions with isothiocyanates give exclusively the C-acylated products.     

Facile and convenient synthesis of B-amino-9-borabicyclo[3.3.1]nonanes. Aminoboration of lsocyanates

The reaction of 9-borabicyclo[3.3.1]nonane (9-BBN) with aliphatic and aromatic primary and secondary amines in tetrahydrofuran (THF) at 65°C proceeds rapidly and quantitatively with evolution of hydrogen and the formation of the corresponding B-amino-9-borabicyclo[3.3.1] nonane (B-amino-9-BBN). Simple evaporation of THF from the reaction mixture gives the B-amino-9-BBN derivatives in high yield and purity. These B-amino-9-BBN derivatives are reactive towards alkyl and aryl isocyanates. Consequently, the aminoboration of various isocyanates has been studied using B-phenylamino-9-BBN. Thus, two equivalents of isocyanates react with one equivalent of B-phenylamino-9-BBN to afford, following the hydrolysis of the intermediate with ethanolamine, N, N'-disubstituted-N -(phenylamido)-ureas in excellent yields. A plausible mechanism for this aminoboration reaction of isocyanates is also presented.     

Lewis acid-controlled reactions of zirconacyclopentadienes with isocyanates and isothiocyanates. One-pot three- or four-component synthesis of multiply substituted iminocyclopentadienes and butadiene-tethered 1,6-bisamides and electrophilic cyclization

Multiply substituted zirconacyclopentadienes including bicyclic zirconacyclopentadienes and zirconaindenes reacted with isocyanates and isothiocyanates in the presence of Lewis acids to afford iminocyclopentadienes and conjugated 1,6-bisamides, depending on the nature of Lewis acids, isocyanates, and isothiocyanates used. Only in the presence of BF₃ could iminocyclopentadienes be obtained in high isolated yields when zirconacyclopentadienes were treated with isocyanates. On the contrary, BF₃ could not mediate the reaction of zirconacyclopentadienes with isothiocyanates. For the reactions of zirconacyclopentadienes with isothiocyanates, EtAlCl₂ was found effective to generate iminocyclopentadienes as the products. Interestingly, however, for the reactions of zirconacyclopentadienes with isocyanates, EtAlCl₂ was found to work very differently from BF₃. Instead of iminocyclopentadienes, conjugated 1,6-bisamides and conjugated mono-amides were obtained as products in high isolated yields from the reactions of zirconacyclopentadienes with isocyanates, depending on the substituents of isocyanates. The reaction path and products could be controlled by Lewis acids. As a demonstration of the usefulness of thus obtained unsaturated bisamides, electrophilic cyclization using acids, NBS, and I₂ was carried out. Electrophilic cyclization of multisubstituted conjugated 1,6-bisamide derivatives afforded cyclic iminoethers in excellent yields with perfect selectivity. Only one of the amide groups took part in the electrophilic cyclization.     

Kinetic study of polyurethanes formation by using differential scanning calorimetry

Kinetics of polyurethane formation between several polyols and isocyanates with dibutyltin dilaurate (DBTDL) as the curing catalyst, were studied in the bulk state by differential scanning calorimetry (DSC) using an improved method of interpretation. The molar enthalpy of urethane formation from secondary hydroxyl groups and aliphatic isocyanates is 72±3 kJ mol^-1 and for aromatic isocyanates it is 55±2 kJ mol^-1 . In the case of a single second order reaction for aliphatic isocyanates reaction, activation energy is 70±5 kJ mol^-1 with oxypropylated polyols and 50±3 kJ mol^-1 with Castor oil. For aromatic isocyanates and oxypropylated polyols the activation energy is higher around 77 kJ mol^-1 . In the case of two parallel reactions (situation for IPDI and TDI 2-4) best fits are observed considering two different activation energies.     

Synthetic and computational studies on intramolecular [2+2] sulfonyl isocyanate-olefin cycloadditions

Novel unsaturated sulfonyl isocyanates were prepared using a boron trichloride promoted thermal cleavage of the corresponding sulfonylcarbamates. Due to their moisture sensitivity, the isocyanates were directly converted into sulfonylureas in good yields. An intramolecular cycloaddition of the olefinic sulfonyl isocyanates to give β-lactam-sulfonamide hybrids was not observed experimentally. Investigation of this cycloaddition by DFT-calculations using the 6-31G* and 6-311+G** basis sets showed it to be endergonic.     

Thermodynamic parameters of urethane formation reactions and concomitant processes

Thermodynamic parameters of reactions of methyl and phenyl isocyanates with a series of compounds were determined by quantum-chemical calculations. The products of these reactions model for various functional groups present in commercial polyurethanes. The thermodynamic stability series for compounds formed from aliphatic and aromatic isocyanates were constructed.     

Malonic ester-blocked aliphatic isocyanates

Products formed on pyrolysis of malonic ester-blocked aliphatic isocyanates depend on the enolizability of the blocked isocyanate. Previous work reported that diethyl malonate-blocked aliphatic isocyanates on pyrolysis yield predominantly “abnormal” products rather than the expected isocyanates. It has now been shown that this behavior results from the reactions of the enol forms. A nonenolizable diethyl methylmalonate-blocked isocyanate has been synthesized. On pyrolysis essentially quantitative conversion to isocyanate and diethyl methylmalonate occurs. Significant differences in reactivity with amines and alcohols also result from the difference in enolizability.     

Heterocyclization of Functionalized Heterocumulenes with C,N- and C,O-Binucleophiles. 1. Cyclocondensation of 1-Chloroalkylheterocumulenes and N-(1-Chloroalkylidene)urethanes with 2-Cyanomethylpyridine

The interaction of 1-chloroalkyl isocyanates, 1-chloroalkylcarbodiimides, 1,1-dichloroalkyl isocyanates, and N-(1-chloroethylidene)-O-methylurethanes with 2-cyanomethylpyridine has been investigated. An effect of organic base has been detected on the regioselectivity of the cyclocondensation of 1-chloroalkyl isocyanates, which leads to 2,3-dihydro-1H-pyrido[1,2-c]pyrimidin-1-one or the isomeric 2,3-dihydro-1H-pyrido[1,2-c]pyrimidin-3-one. Irrespective of the cyclization conditions 1-chloroalkylcarbodiimides react with the formation of 1-imino-2,3-dihydro-1H-pyrido[1,2-c]pyrimidines. One type of product, a 1H-pyrido[1,2-c]pyrimidin-1-one, was also isolated from 1,1-dichloroalkyl isocyanates and N-(1-chloroalkylidene)urethanes.     

Abnormal aza-Wittig reaction on the solid-phase: chemoselectivity studies towards the parallel synthesis of 3-aryl-2,4-dioxo-1,3,5-triazino[1,2-a]benzimidazoles

An abnormal aza-Wittig reaction was observed when resin-bound iminophosporanes were treated with aryl isocyanates on the solid-phase. The mechanism of the reaction may involve the loss of triphenylphosphinimide instead of triphenylphosphinoxide, resulting in the formation of isocyanates instead of carbodiimides as intermediates. The selectivity of the abnormal aza-Wittig reaction versus the normal aza-Wittig reaction was shown to be strongly dependent on the reaction temperature and the nature of the aryl isocyanate employed. Optimization studies revealed that employing electron poor aryl isocyanates at high temperature leads to 95% of abnormal aza-Wittig product. The reaction was used for the parallel solid-phase synthesis of 3-aryl-2,4-dioxo-1,3,5-triazino[1,2-a]benzimidazoles.     

木材溶液中羟基与异氰酸酯反应的研究

以涂料工业广泛应用的新型助剂二元酸酯 (DBE)为液化试剂 ,盐酸为催化剂 ,将苯甲基化木材溶液化后 ,与不同结构的异氰酸酯反应 .利用FT IR及1 3C NMR分析液化苯甲基木质纤维素与不同结构异氰酸酯得到了聚氨酯树脂 ,证明了木材中羟基可以用来作为聚醚多元醇与异氰酸酯制备聚氨酯材料 .通过准确测量体系中游离的NCO含量 ,从而得出不同结构异氰酸酯与木材溶液中羟基的反应规律 .实验结果表明 ,异氰酸酯的存在大大促进了木材结构中羟基的释放 ,由于不同异氰酸酯的活性不同 ,使得羟基值变化亦不相同 ,其顺序为IPDI>HDI>TDI .为了保证最终的材料性能 ,选择TDI和IPDI作为木材溶液制备聚氨酯树脂的异氰酸酯组份较好     

Solid-state cpmas 13C-NMR studies of the reaction of an epoxy resin with masked isocyanates

It has been shown that incorporation of masked isocyanates in the MY720/DDS epoxy significantly reduces the equilibrium moisture absorption by blocking of residual functional groups ( oxirane group) by the isocyanates released in the deblocking reaction of the masked isocyanates. We have now used high resolution ¹³C-CP/MAS NMR to follow the reactions in the solid state and to identify intermediates and by-products. The deblocking reaction of the masked isocyanates also releases the corresponding alcohol, part of which may evaporate during the curing reaction. The resolution in the solid-state spectra is good enough to identify all the reactants and the intermediates involved in the curing reaction. Difference spectra are used to emphasize changes between systems that differ in treatment or composition.