Highly diastereoselective synthesis of bicyclo[4.2.0]octanone derivatives by the [2+2] photocycloaddition of chiral cyclohexenonecarboxylates to ethylene

The diastereoselective [2+2] photocycloaddition of a cyclohexenonecarboxylate containing (−)-8-(4-nitrophenyl)menthyl as a chiral auxiliary to ethylene gave the photocycloadduct, a bicyclo[4.2.0]octanone derivative, with a high degree of diastereoselectivity. A photoreaction, conducted in CH₂Cl₂ at −78 °C gave the corresponding photocycloadduct in 88% de. In the presence of Ti(OR)₄ or Me₃SnCl, the diastereoselectivity was increased up to 92% de.     

Enantiodifferentiating [2+2] photocycloaddition of cyclohexenone carboxylic acid with ethylene using 8-phenylmenthyl amine as a chiral template

Enantiodifferentiating [2+2] photocycloaddition of cyclohexenone carboxylic acid with the smallest olefin, ethylene, was accomplished using 8-phenylmenthyl amine as a chiral template. Particularly, we succeeded in enhancing the enantiomeric excess (ee) value by selective excitation of a chiral substrate–template supramolecular complex.     

Ring-opening metathesis polymerization with [2+2]-crosslinking to create new materials

There are almost no examples of Grubbs’-type ring-opening metathesis polymers that have been [2+2]-crosslinked. Two new monomers, 6 and 10, were used to construct two novel linear soluble polymers 7 and 11, bearing photochemically labile moieties for [2+2]-cycloaddition reactions. These soft polymers were photocrosslinked into very hard polymers, 8 and 12. Potential advantages of these new bioinspired materials include: (1) ready processing into flat, round, and cylindrical shapes; (2) reasonably low toxicity due to trace amounts of catalyst needed; and (3) rapid rate of polymerization and crosslinking that avoids acids and bases.     

Studies in stereoselective [2+2]-cycloadditions with dichloroketene

During the investigation of the reaction of dichloroketene with cyclic enoxy-lactones and acyclic enoxy-ester substrates it was found that only the acylic variants effectively participated in the [2+2]-cycloaddition. Although a complete understanding of the reasons for this are lacking, molecular mechanics calculations do suggest that an out of plane twist of the cabonyl group in the acyclic compounds may be partially responsible. After screening a variety of chiral auxiliaries it was found that useful levels of diastereoselectivity (2.6-10.8:1) could be obtained in this cycloaddition reaction when (R)-2,2-diphenylcyclopentanol was used as the chiral auxiliary.     

Synthetic studies of pestalotiopsin A: asymmetric synthesis of the 2-oxabicyclo[3.2.0]heptane substructure

A functionalized 2-oxabicyclo[3.2.0]heptan-3-one derivative, possessing all the skeletal carbons of pestalotiopsin A, has been synthesized. For the preparation of intermediary cyclobutane derivatives in enantioenriched form, the Lewis acid-catalyzed [2+2] cycloaddition of N-propiolated Oppolzer’s camphorsultam with dimethylketene bis(trimethylsilyl) acetal followed by a stereoselective 1,4-hydride addition/protonation, has been developed.     

Screening of chiral phosphines as catalysts for the enantioselective [3+2] annulations of N-tosylimines with allenic esters

The use of chiral, binaphthyl-based phosphepines as catalysts improves previous results for the enantioselective [3+2] cyclisation reactions between allenic esters and N-tosylimines, both in terms of conversion rate and enantioselectivity. Pyrrolines bearing 1-naphthyl, phenyl, o-tolyl and p-MeO-phenyl substituents on the stereogenic alpha-carbon have been obtained with enantiomeric excesses up to 64-80%.     

Reaction of ene-bis(phosphinylallenes): [2+2] versus [4+2] cycloaddition

Reaction of ene-bis(phosphinylallenes), derived from ene-bis(propargyl alcohols) and chlorodiphenylphosphine, was investigated. Benzene-bridged bis(phosphinylallenes) exclusively gave intramolecular [2+2] cycloadducts in the presence of dimethyl fumarate in sharp contrast to the reaction of benzene-bridged bis(sulfinylallenes), which gave the corresponding [4+2] cycloadducts. On the other hand, substituted ethylene- or five-membered heterocycle-bridged bis(phosphinylallenes) provided [4+2] cycloadducts. Reaction of benzene-bridged diallene bearing both a sulfinyl group and a phosphinyl group on the two allenyl groups was also described.     

Asymmetric synthesis of pyrrolo[1,2-a]indoles via organocatalytic[3 + 2] annulation of substituted 2-vinylindoles with azlactones

The chiral phosphoric acid catalyzed asymmetric[3+2]annulation of substituted 2-vinylindoles with azlactones has been established.This reaction represented a practical approach for the synthesis of structurally diverse pyrrolo[1,2-a]indoles with two vicinal stereocenters including one tetrasubstituted stereocenter in good yields and good stereoselectivities under mild conditions.     

Catalytic enantioselective [2+2]-cycloaddition reaction of 2-methoxycarbonyl-2-cyclopenten-1-one by chiral copper catalyst

A new catalytic system for enantioselective [2+2]-cycloaddition reaction of 2-methoxycarbonyl-2-cyclopenten-1-one with thioacetylene derivatives is described. The use of a catalytic amount (20-30 mol%) of copper(II) salt with chiral bis-pyridine ligand was found to be effective in promoting the [2+2]-cycloaddition reaction, furnishing the corresponding bicyclic compound in good yield and good enantioselectivity.     

Reactivity of allenoates toward aziridines: [3+2] and formal [3+2] cycloadditions

The reactivity of buta-2,3-dienoates toward aziridines is reported. Allenoates react as 2π-component in the [3+2] cycloaddition with the azomethine ylide generated from cis-1-benzyl-2-benzoyl-3-phenylaziridine affording 4-methylenepyrrolidines in a site-, regio-, and stereoselective fashion. Under conventional thermolysis, cis- and trans-2-benzoyl-1-cyclohexyl-3-phenylaziridines showed a different reactivity. These aziridines participate in formal [3+2] cycloadditions with allenes via C-N bond cleavage of the three-membered ring leading to functionalized pyrroles.     

Imine polymers containing chiral nanohoops in the backbone obtained through [2 + 2] cyclocondensation

A simple method for synthesis of polymers containing shape persistent imine macrocycles as nanohoops in the main chain is studied. It is based on the cyclocondensation reaction carried out in solution and room temperature of triphenylamine-based tetraaldehyde compounds with (R,R)-trans-1,2-diaminocyclohexane. The pristine polymer P1 bearing long alkyl groups is soluble during the synthesis but becomes insoluble after precipitation due to the strong and multiple C H/π and π-π stacking intermolecular interactions from arene–arene species and entanglement and interpenetrating of flexible alkyl groups inside of rigid macrocycle hollow. Polymer without any solubilizing groups ( P2 ) separates during the polymerization as an insoluble material. Both polymers are amorphous and have good thermal and environmental stability. They have a low surface area because discrete nanovoids introduced by macrocycles are disconnected in the amorphous polymers and non-accessible for gas adsorption. Polymers have inherent luminescent properties due to triphenylamine groups and chirality derived from (R,R)-conformation of the cyclohexane skeleton. In presence of picric acid (PA), the polymer fluorescence in solid state or suspension is strongly quenched, thus the polymers can work as efficient fluorescent probes toward nitrophenolic compounds. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2565–2573     

The Choice of Rhodium Catalysts in [2+2+2] Cycloaddition Reaction: A Personal Account

[2+2+2] Cycloaddition reaction is a captivating process that assembles six-membered rings from three unsaturations with complete atom economy. Of the multiple transition metals that can be used to catalyze this reaction, rhodium offers many advantages. These include high activity and versatility, but especially the ability to easily tune the reactivity and selectivity by the modification of the ligands around the metal. In this personal account, we summarize our endeavours in the development of efficient and sustainable [2+2+2] cycloaddition reactions to prepare products of interest, develop conditions in which the catalyst can be recovered and reused, and understand the mechanistic details that govern the selectivity of the processes.     

Synthesis of 2-iodoynamides and regioselective [2+2] cycloadditions with ketene

The first synthesis of 2-iodoynamides is described as well as the first [2+2] cycloadditions of ketene with iodo alkynes.     

Stereospecific [2+2] cycloaddition reactions of diphosphorus with alkenes

[2+2] Cycloaddition reactions of P₂ with alkenes were predicted to have concerted paths, that is, pseudoexcitation, distorted 2π_s+2π_s, and 2π_s+2π_a processes without any interventions of intermediates. The pseudoexcitation and/or distorted 2π_s+2π_s paths with retention of configuration of alkenes are kinetically preferred to the 2π_s+2π_a path with inversion of configuration. The reactions were predicted from the appreciable difference in the calculated enthalpies of activation to be stereospecific.     

Practical optical resolution of dl-muscone using tartaric acid derivatives as a chiral auxiliary

A simple and practical synthesis of (R)-(−)-muscone was achieved by optical resolution of dl-muscone using tartaric acid derivatives. The acetalization of dl-muscone with N,N′-dibenzyl-l-tartaramide in the presence of Sc(OTf)₃ and methyl orthoformate furnished a diastereomeric mixture of acetals, which were readily separated by simple recrystallization. Diastereomerically pure acetal was hydrolyzed to give optically pure muscone and recovered N,N′-dibenzyl-l-tartaramide.     

Diastereoselective synthesis of functionalized tetrahydro-γ-carbolines via a [3 + 3] cycloaddition of 2,2′-diester aziridines with β-(indol-2-yl)-α,β-unsaturated ketones

A Sc(OTf)₃-catalyzed [3 + 3] cycloaddition of 2,2′-diester aziridines with β-(indol-2-yl)-α,β-unsaturated ketones was developed, affording polysubstituted tetrahydro-γ-carbolines in single diastereoisomers in good to excellent yields.     

Solid-state[2+2] Photocycloaddition Reaction of Zinc(II) Complex Based on Quaternized 1,2-Bis(4'-pyridyl) ethylene

Aphotoactive metal-organic complex[Zn₂(BCbpe)₂(p-DBC)₂]∙     

Synthesis and unusual [2+2]-cycloaddition reactions of ethyl 4-chloro-2-oxobut-3-ynoate with unactivated alkenes

The highly activated acetylenes, ethyl 4-chloro-2-oxobut-3-ynoate and ethyl 4-bromo-2-oxobut-3-ynoate, were prepared from readily available bis(trimethylstannyl)acetylene in two steps with high overall yield. An unusual ability of the former to furnish [2+2]-cycloadducts with 1,1-disubstituted alkenes in the absence of irradiation and catalysts was discovered. The cycloaddition of ethyl 4-chloro-2-oxobut-3-ynoate to the 1,2-disubstituted alkenes was shown to be effectively catalyzed with stannic chloride.     

Palladium-Catalyzed Asymmetric [8+2] Dipolar Cycloadditions of Vinyl Carbamates and Photogenerated Ketenes

Higher-order cycloadditions, particularly [8+2] cycloadditions, are a straightforward and efficient strategy for constructing significant medium-sized architectures. Typically, configuration-restrained conjugated systems are utilized as 8π-components for higher-order concerted cycloadditions. However, for this reason, 10-membered monocyclic skeletons have never been constructed via catalytic asymmetric [8+2] cycloaddition with high peri- and stereoselectivity. Here, we accomplished an enantioselective [8+2] dipolar cycloaddition via the merger of visible-light activation and asymmetric palladium catalysis. This protocol provides a new route to 10-membered monocyclic architectures bearing chiral quaternary stereocenters with high chemo-, peri-, and enantioselectivity. The success of this strategy relied on the facile in situ generation of Pd-containing 1,8-dipoles and their enantioselective trapping by ketene dipolarophiles, which were formed in situ via a photo-Wolff rearrangement.