A facile synthesis of 3 or 3,3′-substituted binaphthols and their applications in the asymmetric addition of diethylzinc to aldehydes

By using a direct ortho-lithiation, the ligands (S)-3-methoxymethyl-1,1′-bi-2-naphthol [(S)-1], (S)-3,3′-bis(methoxymethyl)-1,1′-bi-2-naphthol [(S)-2], (S)-3-(quinolin-2-yl)-1,1′-bi-2-naphthol [(S)-3] and (S)-3,3′-bis(quinolin-2-yl)-1,1′-bi-2-naphthol [(S)-4] have been synthesized. (S)-1 and (S)-3 show moderate catalytic properties for the asymmetric diethylzinc addition to aromatic aldehydes.     

Photoinduced electron transfer-initiated asymmetric cyclization of N-benzoyl-α-dehydronaphthylalanine alkyl esters carrying chiral and bulky auxiliaries

The irradiation of the title compounds [(Z)-1] having (S)-(+)-sec-butyl, (−)-mentyl and related chiral auxiliaries in methanol and 1,2-dichloroethane containing 2-(diethylamino)ethanol afforded chiral auxiliary-substituted (4S,5S)-, (4R,5R)-, (4R,5S)- and (4S,5R)-4,5-dihydrooxazole derivatives (2) along with (E)-1. It was found that the photoinduced electron transfer-initiated cyclization of 1 gives either of the two diastereomers for cis-2 and trans-2 in diastereomeric excess whose value varies from 6% to 81% depending on solvent and chiral auxiliary.     

Chiral cyclopentadienyl ruthenium(II) complexes with P,P-ligands derived from (1R,2R)-1,2-diaminocyclohexane: Synthesis,crystal structures and catalytic activity in Diels–Alder reactions

Chiral cyclopentadienyl ruthenium(II) complexes [CpRu(L1–L3)Cl] (5–7) have been prepared by reaction of [CpRu(PPh₃)₂Cl] with chiral P,P-ligands (1R,2R)-1,2-bis(diphenylphosphinamino)cyclohexane (L1), N,N′-[bis-(3,3′-bis-tert-butyl-5,5′-bis-methoxy-1,1′-biphenyl-2,2′-diyl)phosphite]-(1R,2R)-1,2-diaminocyclohexane (L2) and N,N′-[bis-(R)-1,1′-binaphtyl-2,2′-diyl)phosphite]-(1R,2R)-1,2-diaminocyclohexane (L3). The molecular structures of 5 and 6 have been determined by single-crystal X-ray analysis. Studies on catalytic activity of the cations derived from (5–7) by treatment with AgSbF₆, are also reported.     

Synthesis, structure, and catalytic activity of titanium(IV) and zirconium(IV) amides with chiral biphenyldiamine-based ligands

A new series of titanium(IV) and zirconium(IV) amides have been prepared from the reaction between M(NMe₂)₄ (M = Ti, Zr) and C₂-symmetric ligands, (R)-2,2′-bis(pyridin-2-ylmethylamino)-6,6′-dimethyl-1,1′-biphenyl (2H₂), (R)-2,2′-bis(pyrrol-2-ylmethyleneamino)-6,6′-dimethyl-1,1′-biphenyl (3H₂), (R)-2,2′-bis(diphenylphosphinoylamino)-6,6′-dimethyl-1,1′-biphenyl (4H₂), (R)-2,2′-bis(methanesulphonylamino)-6,6′-dimethyl-1,1′-biphenyl (5H₂), (R)-2,2′-bis(p-toluenesulphonylamino)-6,6′-dimethyl-1,1′-biphenyl (6H₂), and C₁-symmetric ligands, (R)-2-(diphenylthiophosphoramino)-2′-(dimethylamino)-6,6′-dimethyl-1,1′-biphenyl (7H) and (R)-2-(pyridin-2-ylamino)-2′-(dimethylamino)-6,6′-dimethyl-1,1′-biphenyl (8H), which are derived from (R)-2,2′-diamino-6,6′-dimethyl-1,1′-biphenyl. Treatment of M(NMe₂)₄ with 1 equiv. of N₄-ligand, 2H₂ or 3H₂ gives, after recrystallization from an n-hexane solution, the chiral zirconium amides (2)Zr(NMe₂)₂ (9), (3)Zr(NMe₂)₂ (11), and titanium amide (3)Ti(NMe₂)₂ (10), respectively, in good yields. Reaction of Zr(NMe₂)₄ with 1 equiv of diphenylphosphoramide 4H₂ affords the chiral zirconium amide (4)Zr(NMe₂)₂ (12) in 85% yield. Under similar reaction conditions, treatment of Ti(NMe₂)₄ with 1 equiv. of sulphonylamide ligand, 5H₂ or 6H₂ gives, after recrystallization from a toluene solution, the chiral titanium amides (5)Ti(NMe₂)₂·0.5C₇H₈ (13·0.5C₇H₈) and (6)Ti(NMe₂)₂ (15), respectively, in good yields, while reaction of Zr(NMe₂)₄ with 1 equiv. of 5H₂ or 6H₂ gives the bis-ligated complexes, (5)₂Zr (14) and (6)₂Zr (16). Treatment of M(NMe₂)₄ with 2 equiv. of diphenylthiophosphoramide ligand 7H or N₃-ligand 8H gives, after recrystallization from a benzene solution, the bis-ligated chiral zirconium amides (7)₂Zr(NMe₂)₂ (17) and (8)₂Zr(NMe₂)₂ (19), and bis-ligated chiral titanium amide (8)₂Ti(NMe₂)₂ (18), respectively, in good yields. All new compounds have been characterized by various spectroscopic techniques, and elemental analyses. The solid-state structures of complexes 10, 12, 13, and 17-19 have further been confirmed by X-ray diffraction analyses. The zirconium amides are active catalysts for the asymmetric hydroamination/cyclization of aminoalkenes, affording cyclic amines in good to excellent yields with moderate ee values, while the titanium amides are not.     

New A-ring analogs of the hormone 1α,25-dihydroxyvitamin D3: (2′-hydroxymethyl)tetrahydrofuro[1,2-a]-25-hydroxyvitamin D3

Conceptually new, enantiomerically pure bicyclic tetrahydrofuro[1,2-a]-A-ring phosphine oxides (+)-4 and (−)-4 were successfully prepared from methyl 2-pyrone-3-carboxylate and (S)- or (R)-2-(tert-butyldimethylsilyloxy)methyl-2,3-dihydrofuran, respectively. In addition, (2′-hydroxymethyl)tetrahydrofuro[1,2-a]-25-hydroxyvitamin D₃3a and 3b as new A-ring-modified analogs of the natural hormone 1α,25-dihydroxyvitamin D₃ were readily synthesized by using Lythgoe-type coupling of the A-ring phosphine oxides (+)-4 and (−)-4 with C,D-ring ketone (+)-5.     

Synthesis and characterization of polybinaphthalene incorporating chiral (R) or (S)-1,1′-binaphthalene and oxadiazole units by Heck reaction

Chiral conjugated polymers P-1 and P-2 were synthesized by the polymerization of (R)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthalene ((R)-M-1) and (S)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthalene ((S)-M-1) with 2,5-bis(4-vinylphenyl)-1,3,4-oxadiazole (M-2) under Pd-catalyzed Heck coupling reaction, respectively. Both monomers and polymers were analysed by NMR, MS, FT-IR, UV, DSC-TG, fluorescent spectroscopy, GPC and CD spectra. The chiral conjugated polymers exhibit strong Cotton effect in their circular dichroism (CD) spectra indicating a high rigidity of polymer backbone. CD spectra of polymers P-1 and P-2 are almost identical and have opposite signs for their position. These polymers have strong blue fluorescence.     

Salen-ligands based on a planar-chiral hydroxyferrocene moiety: Synthesis, coordination chemistry and use in asymmetric silylcyanation

Condensation of the O-protected hydroxyferrocene carbaldehyde (S_p)-1 with suitable diamines, followed by liberation of the hydroxyferrocene moiety leads to a new type of ferrocene-based salen ligands (3). While the use of ethylenediamine in the condensation reaction yields the planar-chiral ethylene-bridged ligand [(S_p,S_p)-3a], reaction with the enantiomers of trans-1,2-cyclohexylendiamine gives rise to the corresponding diastereomeric cyclohexylene-bridged systems [(S,S,S_p,S_p)-3b and (R,R,S_p,S_p)-3c], which feature a combination of a planar-chiral ferrocene unit with a centrochiral diamine backbone. Starting with the ferrocene-aldehyde derivative (R_p)-1, the enantiomeric ligand series (3d/e/f) is accessible via the same synthetic route.The (S_p)-series of these newly developed N₂O₂-type ligands was used for the construction of the corresponding mononuclear bis(isopropoxy)titanium (4a/b/c), methylaluminum (5a/b/c) and chloroaluminum-complexes (6a/b/c), which were isolated in good yields and identified by X-ray diffraction in several cases. The aluminum complexes (5/6) were successfully used in the Lewis-acid catalyzed addition of trimethylsilylcyanide to benzaldehyde, yielding the corresponding cyanohydrins in 45-62% enantiomeric excess.     

An efficient method for the preparation of 3-hydroxyl-5-substituted 2-pyrrolidones and application in the divergent synthesis of (−)-preussin and its analogues

An asymmetric method to (S,R)-α-hydroxyl-γ-amino alcohols 12 through a diastereoselective addition of Grignard reagents to β-chiral aldimines 11 is described. Subsequent oxidation/cyclization with Sarett reagent provided a novel approach to lactams 14, a flexible building block whose utility was demonstrated in the divergent synthesis of antifungal agent (−)-preussin 5 and its three analogues 23, 24, 25.     

P-chirogenic phosphines. MOP/diPAMP hybrids, their oxide crystal structures, reduction studies and alternative syntheses

The novel P-chirogenic anisylphenylMOP derivatives (R,R) and (R,S)-2-(anisylphenylphosphino)-2′-methoxy-1,1′-binaphthyl (10a and b) have been synthesized and their corresponding oxides characterised by X-ray crystallography. The results of a parallel screening regimen with various reducing agents highlight the sensitivity of the tertiary phosphine oxides to epimerisation and, interestingly, reveal that the PO, O-CH₃ and P-C₆H₅ bonds can all be cleaved selectively depending on the reducing agents employed. An alternative synthesis was provided by direct coupling of the secondary phosphine with (R)-methoxytriflate 4, which led to the isolation of the optically pure P-chirogenic phosphines via their borane adducts. A brief study of the coordination chemistry of 10a with different rhodium precursors, relevant to the catalytic asymmetric addition of boronic acids to aldehydes is also reported.     

High asymmetric induction using a diastereomeric mixture of axially dissymmetric ligands

We have reported that our new axially dissymmetric ligand with two chiral centers, (R_a)-2,2′-bis[(R)-1H-1-hydroxyperfluorooctyl]biphenyl ((R_a)-(R)₂-1c, or tentatively called as (R_a)-(R)₂-PFCAB-7), worked as a good asymmetric inducer for the reaction of benzaldehyde with diethylzinc. Now, a mixture of (R_a)-(R)₂- and (S_a)-(R)₂-PFCAB-7 even in 1:4 ratio (−60% de) was found to give nearly the same asymmetric induction as pure (R_a)-(R)₂-PFCAB-7 of the corresponding molar percents. This result suggests that both isomers do not form complex and that (R_a)-(R)₂-PFCAB-7 accelerates the reaction and induces high asymmetry, while (S_a)-(R)₂-1c does not accelerate the reaction significantly and does not induce asymmetry at all. This ligand of low ee, (R_a)-(R)₂-PFCAB-7 of 20% ee, did not show appreciable asymmetric amplification, suggesting no formation of heterochiral complex.     

Synthetic access to optically active isoflavans by using allylic substitution

A general approach to the (S)- and (R)-isoflavans was invented, and efficiency of the method was demonstrated by the synthesis of (S)-equol ((S)-3), (R)-sativan ((R)-4), and (R)-vestitol ((R)-5). The key step is the allylic substitution of (S)-6a (Ar¹=2,4-(MeO)₂C₆H₃) and (R)-6b (Ar¹=2,4-(BnO)₂C₆H₃) with copper reagents derived from CuBr·Me₂S and Ar²-MgBr (7a, Ar²=4-MeOC₆H₄; 7b, 2,4-(MeO)₂C₆H₃; 7c, 2-MOMO-4-MeOC₆H₃), furnishing anti S_N2′ products (R)-8a and (S)-8b,c with 93-97% chirality transfer in 60-75% yields. The olefinic part of the products was oxidatively cleaved and the Me and Bn groups on the Ar¹ moieties was then removed. Finally, phenol bromide 9a and phenol alcohols 9b,c underwent cyclization with K₂CO₃ and the Mitsunobu reagent to afford (S)-3 and (R)-4 and -5, respectively.     

Asymmetric synthesis of (R)- and (S)-2-trifluoromethylepinephrine

An asymmetric synthesis of (R)- and (S)-2-trifluoromethylepinephrine (1R and 1S) is presented. Trifluoromethylation involves nucleophilic aromatic substitution of halobenzene 4 most likely via a copper mediated CF₃ anion equivalent generated in situ. The asymmetric step involves conversion of 3,4-dimethoxy-2-trifluoromethylbenzaldehyde (5) to silyl cyanohydrin (6R and 6S) using a chiral salen catalyst in the presence of titanium. 1R and 1S are potential alternatives to currently used vasoconstrictors in local anesthetic formulations.     

Polyhydroxylated pyrrolizidines. Part 6: A new and concise stereoselective synthesis of (+)-casuarine and its 6,7-diepi isomer, from DMDP

A new synthesis for (+)-casuarine (1) and its 6,7-diepi isomer (15) in a stereocontrolled manner, is reported herein. An appropriately protected polyhydroxylated pyrrolidine, such as (2R,3R,4R,5R)-3,4-dibenzyloxy-2′-O-tert-butyldiphenylsilyl-2,5-bis(hydroxymethyl)pyrrolidine (3, protected DMDP), easily available from d-fructose, was chosen as the chiral starting material. Compounds 1 and 15 were obtained from 3, in seven steps, in a 23.2 and 20.5% overall yields, respectively.     

A novel dynamic kinetic resolution accompanied by intramolecular transesterification: asymmetric synthesis of a 4-hydroxymethyl-2-oxazolidinone from serinol derivatives

Reaction paths of the one-pot reaction of (R)-2-(α-methylbenzyl)amino-1,3-propanediol (1) and 2-chloroethyl chloroformate with DBU giving (4S,αR)-4-hydroxymethyl-3-(α-methylbenzyl)-2-oxazolidinone [(4S)-2] (94% de) were investigated. Intermediates of this reaction, 2-chloroethyl (2S)- and 2-chloroethyl (2R)-3-hydroxy-2-[(αR)-α-methylbenzyl]aminopropyl carbonates [(2S)-4 and (2R)-4], were synthesized individually. After the addition of DBU to the respective solution of the carbonate (2S)-4 and that of (2R)-4 in dichloromethane, the intramolecular transesterification between (2S)-4 and (2R)-4 and the diastereoselective intramolecular cyclization proceeded to afford (4S)-2 in high diastereomeric excess. Therefore, two monocarbonates (2S)-4 and (2R)-4 were kinetically resolved by this cyclization during the intramolecular transesterification between (2S)-4 and (2R)-4. We found that this process involved dynamic kinetic resolution accompanied by intramolecular transesterification.     

Enantioselective synthesis of axially chiral 1-(1-naphthyl)isoquinolines and 2-(1-naphthyl)pyridines through sulfoxide ligand coupling reactions

Racemic 1-(1′-isoquinolinyl)-2-naphthalenemethanol rac-12 was prepared through a ligand coupling reaction of racemic 1-(tert-butylsulfinyl)isoquinoline rac-7 with the 1-naphthyl Grignard reagent 10. Resolution of rac-12 was achieved through chromatographic separation of the Noe-lactol derivatives 14 and 15, providing (R)-(−)-12 of >99% ee and (S)-(+)-12 of 90% ee. The ligand coupling reaction of optically enriched sulfoxide (S)-(−)-7 (62% ee) with Grignard reagent 10 furnished rac-12, with the absence of stereoinduction resulting from competing rapid racemisation of the sulfoxide 7. Reaction of optically enriched (S)-(−)-7 with 2-methoxy-1-naphthylmagnesium bromide was also accompanied by racemisation of the sulfoxide 7, and furnished optically active (+)-1-(2′-methoxy-1′-naphthyl)isoquinoline (+)-3b in low enantiomeric purity (14% ee). The absolute configuration of (+)-3b was assigned as R using circular dichroism spectroscopy, correcting an earlier assignment based on the Bijvoet method, but in the absence of heavy atoms. Optically active 2-pyridyl sulfoxides were found not to undergo racemisation analogous to the 1-isoquinolinyl sulfoxide 7, with the ligand coupling reactions of (R)-(+)- and (S)-(−)-2-[(4′-methylphenyl)sulfinyl]-3-methylpyridines, (R)-(+)-17 and (S)-(−)-17, with 2-methoxy-1-naphthylmagnesium bromide providing (−)- and (+)-2-(2′-methoxy-1′-naphthyl)-3-methylpyridines, (−)-18 and (+)-18, in 53 and 60% ee, respectively. The free energy barriers to internal rotation in 3b and 18 have been determined, and the isoquinoline (R)-(−)-12 examined as a ligand in the enantioselectively catalysed addition of diethylzinc to benzaldehyde; (R)-(−)-12 was also converted to (R)-(−)-N,N-dimethyl-1-(1′-isoquinolinyl)-2-naphthalenemethanamine (R)-(−)-19, and this examined as a ligand in the enantioselective Pd-catalysed allylic substitution of 1,3-diphenylprop-2-enyl acetate with dimethyl malonate.     

Synthesis, structure, and catalytic activity of titanium complexes with new chiral 11,12-diamino-9,10-dihydro-9,10-ethanoanthracene-based ligands

A new series of organo-titanium complexes have been prepared from the reaction between Ti(NMe₂)₄ and C₂-symmetric ligands, (R,R)-11,12-bis(pyrrol-2-ylmethyleneamino)-9,10-dihydro-9,10-ethanoanthracene (1H₂), and (R,R)-bis(diphenylthiophosphoramino)-9,10-dihydro-9,10-ethanoanthracene (2H₂), (R,R)-11,12-bis(mesitylenesulphonylamino)-9,10-dihydro-9,10-ethanoanthracene (3H₂) and (R,R)-bis(diphenylthiophosphoramino)-1,2-cyclohexane (4H₂). Treatment of Ti(NMe₂)₄ with 1 equiv of 1H₂ gives, after recrystallization from a benzene solution, the binuclear double helicate titanium amide (1)₂[Ti(NMe₂)₂]₂⋅(5) in 71% yield. While under similar reaction conditions, reaction of Ti(NMe₂)₄ with 1 equiv of 2H₂, 3H₂ or 4H₂ gives, after recrystallization from a toluene or benzene solution, the mononuclear single helicate titanium amides (2)Ti(NMe₂)₂ (6), (3)Ti(NMe₂)₂ (7) and (4)Ti(NMe₂)₂ (8), respectively, in good yields. All new compounds have been characterized by various spectroscopic techniques, and elemental analyses. The solid-state structures of complexes 5-8 have further been confirmed by X-ray diffraction analyses. The titanium amides are active catalysts for the polymerization of rac-lactide, leading to the isotactic-rich polylactides.     

Application of chiral tetrahydropentalene ligands in rhodium-catalyzed 1,4-addition of (E)-2-phenylethenyl- and (Z)-propenylboronic acids to enones

Chiral tetrahydropentalenes (3aR,6aR)-1 have been prepared and used as ligands in the Rh-catalyzed 1,4-addition of 1-alkenylboronic acids to cyclic enones 5. It has been discovered that the stereochemistry of the reaction was controlled by the steric properties of the aryl groups in 1 rather than their electronic nature. In the vinylation with (E)-2-phenylethenylboronic acid 5, ligands (3aR,6aR)-1 provided enantioselectivity up to 87% ee and gave high yields of ethenylketones 6 in the presence of 1 (6.6 mol %). The configuration of all ketone products obtained with (3aR,6aR)-1 is (S). Rh-catalyzed reaction of cyclopentenone 4a and (Z)-propenylboronic acid 7 in the presence of ligands (3aR,6aR)-1 yielded at 50 °C an inseparable mixture of (Z)- and (E)-ketones 8 with (Z)-8 as the major product and both in only moderate enantiomeric excess.     

Screening of ligands in the asymmetric metallocenethiolatocopper(I)-catalyzed allylic substitution with Grignard reagents

Screening of metallocenethiolate ligands for copper(I)-catalyzed substitution of allylic acetates with Grignard reagents has been carried out. The previously used ligand, lithium (R,S_p)-2-(1-dimethylaminoethyl)ferrocenylthiolate (4a), possessing both central and planar chirality, was the starting point for the screening. It was found that the diastereomeric ligand lithium (R,R_p)-2-(1-dimethylaminoethyl)ferrocenylthiolate (4b) exhibiting reversed planar chirality gave increased enantioselectivity in the allylic substitution, at least when cinnamyl acetate was used as a substrate. The ruthenocene-based ligand lithium (R,S_p)-2-(1-dimethylaminoethyl)ruthenocenylthiolate (4c) gave an enhanced reaction rate, but lower chiral induction. The use of disulfide bis[(R,S_p)-2-(1-dimethylaminoethyl)ferrocenyl]disulfide (7a) as a ligand precursor worked well but resulted in lower enantioselectivity.     

First synthesis of (+)-myxothiazol A

First convergent synthesis of (+)-myxothiazol A (1) was achieved based on modified (one-pot) Julia olefination between (3,5R)-dimethoxy-(4R)-methyl 6-oxo-(2E)-hexenamide (2), corresponding to left-side of the final molecule, and E-4-2′-(1S,6-dimethylheptadiene)-(2,4′-bis-thiazole)-4-methybenzothiazole sulfone (4) corresponding to right-side.     

Asymmetric synthesis of (R)-(+)-6-(1,4-dimethoxy-3-methyl-2-naphthyl)-6-(4-hydroxyphenyl)hexanoic acid as a key intermediate for a neurodegenerative disease agent

An asymmetric synthesis of (R)-(+)-6-(1,4-dimethoxy-3-methyl-2-naphthyl)-6-(4-hydroxyphenyl)hexanoic acid 2 as a key intermediate for a neurodegenerative disease agent 1 has been developed. A key reaction was an asymmetric hydrogenation of hindered acrylic acid 13 catalyzed by the Rh-JOSIPHOS system in the presence of a base to afford a chiral acid up to 93% ee.