A novel example of vinylic SRN1: Reactions of 3,3-difluoro-1-iodo-2-phenylcyclopropene with thiolate ions

The reactions of 3,3-difluoro-1-iodo-2-phenylcyclopropene with thiolate ions (with a molar ratio of 1:1) were carried out in laboratory illumination to give the corresponding substituted product. The presence of p-dinitrobenzene (p-DNB) or hydroquinone (HQ) as well as darkness significantly suppressed the reaction. ESR trapping experiments also evidenced the existence of fluorinated radical. All these results demonstrate the reaction involved a vinylic saturated alkyl and aromatic halides (S_RN1) mechanism.     

One-pot reaction for the concise synthesis of spiro[benzofuran-2,2′-naphthalen]-1′-one derivatives

A novel one-pot two-step protocol has been developed to synthesize various spiro[benzofuran-2,2′-naphthalen]-1′-one derivatives from the three-component reaction of tetralones, 2-hydroxyphenyl functionalized α,β-unsaturated ketones, and iodine. One C–C bond and one C–O bond have formed during this process. The notable features of this protocol are simple and mild reaction conditions, applicable to a wide range of readily available starting materials, good yields (up to 91%), and excellent stereoselectivities (up to 97:3).     

Synthesis of cyclohexadienylstannanes - Novel example of vinylic SRN1 mechanism: A theoretical and experimental study

The reaction of trimethyltinsodium (1) with 1-(diethoxyphosphoryl)oxy-1,3-cyclohexadienes in liquid ammonia under irradiation affords the corresponding 1-trimethylstannylcyclohexadienes. We suggest that these reactions occur by an S_RN1 mechanism. On the other hand, 2-(diethoxyphosphoryl)oxy-1,3-cyclohexadiene reacts very slowly towards 1 and the substitution product decomposes under the reaction conditions employed. Thus, structurally similar compounds do not behave in the same way under ET conditions. We suggest that this behavior is mainly due to differences in spin density of their radical anions, which affect their fragmentation rates. Our results are supported by computational calculations.     

<Emphasis Type="Italic">S</Emphasis><Subscript>RN</Subscript>1 Reactions in the Nitrobenzo[1,3]dioxole Series

5-Chloromethyl-6-nitrobenzo[1,3]dioxole has been shown to react with 2-nitropropane anion to give C-alkylation by an S _RN1 mechanism. The reaction was extended to various aliphatic, cyclic, and heterocyclic nitronate anions, leading to a new series of nitrobenzo[1,3]dioxole derivatives.     

Selective synthesis of mono- and distannylpyridines from chloropyridinols via an SRN1 mechanism

A selective two-step synthesis of either mono- or distannylated pyridines from commercially available pyridinols, involving its conversion to the corresponding diethyl pyridyl phosphates (pyDEP) followed by the reaction with Me₃SnNa in liquid ammonia, is described.The results obtained clearly indicate that the reactions proceed through an unimolecular radical nucleophilic substitution mechanism (S_RN1) with intermediacy of a monosubstitution product.     

One pot four-component reaction for the efficient synthesis of spiro[indoline-3,4′-pyrano[2,3-c]pyrazole]-3′-carboxylate derivatives

A novel one pot protocol has been developed to synthesize various spiro[indoline-3,4′-pyrano[2,3-c]pyrazole]-3′-carboxylate derivatives from the four-component reaction of isatin, malononitrile, hydrazine derivatives and dialkyl acetylenedicarboxylates. In this process two C–C bonds, two C–N bonds and one C–O bond have formed in one pot. The notable features of this protocol are simple and environmentally benign reaction condition, easy isolation of products, applicable to a wide range of readily available starting materials and good yields.     

A stereocontrolled route to the synthesis of (±)-3-amino-2,2-dimethyl-1,3-diphenylpropan-1-ol

Both the diastereomers of (±)-3-amino-2,2-dimethyl-1,3-diphenylpropan-1-ol were synthesized starting from a common intermediate, namely, β-hydroxy oxime 6. Diastereoselective reduction with NaBH₄/TiCl₄ and H₂-Pd/C provided syn- and anti-isomers, respectively. Good overall yield and selectivity were realized using a simple protocol.     

Pyrazolo[2′,3′:3,4][1,3]oxazino[5,6-b]quinoxaline, a novel tetracyclic ring system

Reaction of 2-chloro-3-(3-chloro-1H-pyrazol-5-yl)quinoxaline and aldehydes does not afford the corresponding N-(α-hydroxyalkylated) derivatives but results in a cyclisation reaction to give a derivative bearing the hitherto undescribed pyrazolo[2′,3′:3,4][1,3]oxazino[5,6-b]quinoxaline system.     

A regioselective three-component reaction for synthesis of novel 1′H-spiro[isoindoline-1,2′-quinazoline]-3,4′(3′H)-dione derivatives

A ring opening and regioselective three-component reaction of isatoic anhydride, isatins, and aromatic or aliphatic primary amines in the presence of catalytic amount of KAl(SO₄)₂·12H₂O (alum) to yield a novel series of 1′H-spiro[isoindoline-1,2′-quinazoline]-3,4′(3′H)-dione is described.     

InCl3 and ZrCl4 catalyzed regioselective reaction of 2,2′-dihydroxybiphenyl with terminal alkynes: synthesis of new dibenzo[d,f][1,3]dioxepines

The regioselective reaction of 2,2′-dihydroxybiphenyl with terminal alkynes was found to be rapidly catalyzed by InCl₃ and ZrCl₄. The chemoselectivity of catalysts and alkynes for biphenol over water, together with the reaction mechanism are discussed in details.     

Facile synthesis of spiro[benzo[e]indole-2,2′-piperidine] derivatives and their transformation to novel fluorescent scaffolds

The reaction of azaheterocyclic enamines with acrylamide was employed for the preparation of novel fluorescent scaffolds possessing a benzo[e]indoline moiety. Reaction of 3-substituted 2-methylidene-1H-benzo[e]indole with acrylamide gave rise to spiro[benzo[e]indole-2,2′-piperidin]-6′-ones. Ring opening reactions of the latter spiro compounds were investigated. Benzo[e]indoline derivatives possessing 2-(3-carbamoylpropyl), 2-[3-(ethoxycarbonyl)propyl] and 2-(4-aminobutyl) side chains were synthesised. The optical properties of the benzo[e]indoline derivatives were studied by UV-vis and fluorescence spectroscopy.     

A novel one-pot and efficient procedure for the synthesis of 3H-spiro[isobenzofuran-1,6′-pyrrolo[2,3-d]pyrimidine]-2′,3,4′,5′-tetraones

A novel and practical one-pot procedure is described for the preparation of several new of 3H-spiro[isobenzofuran-1,6′-pyrrolo[2,3-d]pyrimidine]-2′,3,4′,5′-tetraones based on the addition reaction of ninhydrin and 6-aminouracils followed by oxidative cleavage of their corresponding dihydroxyindenopyrrolopyrimidines.     

An InCl3 catalyzed facile one-pot synthesis of novel dispiro[cyclopent-3′-ene]bisoxindoles

An InCl₃ catalyzed efficient synthesis of novel dispiro[cyclopent-3′-ene]bisoxindoles is accomplished via a one-pot reductive cyclization of isatylidene malononitriles using the Hantzsch ester.     

One-pot three-component reaction for the synthesis of biologically important spiro[benzo[f]quinoline-3,3′-indoline] derivatives

A previously unknown class of highly substituted benzoquinoline–spirooxindole are easily prepared by a novel application of a mild and efficient catalyst SbCl₃ for carbon–carbon and carbon–nitrogen bond formation reaction involving isatin, alkyne (dialkyl but-2-ynedioate) with aromatic amine (2-naphthylamine) in a one-pot three-component reaction. This protocol of one-pot synthesis afforded a library of dialkyl 2′-oxo-4H-spiro[benzo[f]quinoline-3,3′-indoline]-1,2-dicarboxylate derivatives, a potential bioactive compound in very good to excellent yields.     

Synthesis, properties and molecular structure of a novel dicyanoheptafulvene derivative, 4′-dicyanomethylidenedispiro[cyclohexane-1, 1′-(1′,4′,7′-trihydrocyclopenta[f]azulene)-7′,1″-cyclohexane]

A novel dicyanoheptafulvene 9 annulated by two spiro[4,5]deca-1,3-dienes was synthesized by the reaction of dispirocyclopentaazulenium cation 8 with bromomalononitrile. Although 9 was found to have a nonplanar heptafulvene structure by its X-ray crystallographic analysis, it is still capable of π-conjugation and thus shows appreciable contribution of the dipolar resonance form 9B based on its spectroscopic data. The degree of the contribution was further evaluated for various dicyanoheptafulvenes in terms of the partial sum of atomic charges of the dicyanomethylene group in the calculated structures besides the interplanar angles of the heptafulvene part and the length of the exocyclic double bond in the crystal structures.     

Synthesis of 1′-aryl-2′-(2-oxoindolin-3-yl)spiro[indoline-3,5′-pyrroline]-2,3′-dione via one-pot reaction of arylamines, acetone, and isatins

An efficient synthetic method for 1′-aryl-2′-(2-oxoindolin-3-yl)spiro[indoline-3,5′-pyrroline]-2,3′-diones was successfully developed via the one-pot domino reaction of arylamines, acetone, and isatins in acetic acid. The reaction mechanism involved the sequential Michael addition and ring closure of the in situ formed 3-N-aryliminoisatin and isatylidene acetone.     

An efficient diastereoselective synthesis of spiro pyrido[2,1-b][1,3]oxazines via a novel pyridine-based three-component reaction

The zwitterions generated from pyridine and dialkyl acetylenedicarboxylate (DAAD) reacted with benzofuran-2,3-diones to form highly substituted spiro pyrido[2,1-b][1,3]oxazines in good to high yields without using a catalyst.     

One-pot approach to the synthesis of novel 12H-chromeno[2′,3′:4,5]imidazo[1,2-a]pyridines in aqueous media

The chromeno-imidazo[1,2-a]pyridine scaffold was generated in an one pot condensation/cyclization reaction involving a salicylaldehyde and 1-(cyanomethyl)pyridinium chloride, in aqueous sodium carbonate solution. These novel compounds were isolated in 47-71% yield. The reaction pathway was followed by ¹H NMR spectroscopy allowing a clear understanding of the side reactions involved in the process.Different mono-substituted pyridinium chlorides were synthesized and reacted with mono-substituted salicylaldehydes and a detailed discussion of the scope of the synthetic method is also presented.     

An efficient synthesis of novel spiro[[8H]indeno[2,1-b]-thiophene-8,9′-fluorene] building block for blue light-emitting materials

We have developed efficient synthetic routes to obtain a novel building block spiro[[8H]indeno[2,1-b]thiophene-8,9′-fluorene] (SITF), a monothiophene-containing spirobifluorene analogue, and constructed blue light-emitting materials, including 2′,7′-bis([1,1′-biphenyl]-4-yl)-spiro[indeno[2,1-b]thiophene-8,9′-fluorene] (BBP-SITF) and 2′,7′-bis(9,9′-spirobifluoren-2-yl)spiro[[8H]indeno[2,1-b]-thiophene-8,9′-fluorene] (BSBF-SITF). BSBF-SITF has shown to be a stable blue light-emitting material with high PL quantum efficiency (89%) and unique regioselective feature at the C2 of thiophene, which indicate that BSBF-SITF will be useful for constructing complicated optoelectronic systems.     

Synthesis of 3-[2-(1,3-butadienyl)]-1H-indoles en route to murrapanine analogue

A three-step procedure has been developed for the synthesis of 3-[2-(1,3-butadienyl)]-1H-indoles. TBAF was proved to be an effective reagent for dehydrobromination and carbomethoxy deprotection in one step to give 3-[2-(1,3-butadienyl)]-1H-indoles from the corresponding bromo-derivatives. Suitably substituted indolyl-1,3-butadiene has been successfully applied to prepare murrapanine analogue via Diels-Alder reaction.