Acidic ionic liquid [NMP]H2PO4 as dual solvent-catalyst for synthesis of β-alkoxyketones by the oxa-Michael addition reactions

Acidic ionic liquid N-methyl-2-pyrrolidonium dihydrogen phosphate [NMP]H₂PO₄ was prepared and used as efficient catalyst and reaction medium to synthesize β-alkoxyketones by the oxa-Michael addition reactions for the first time. The effect of anions and cations, amount of ionic liquid on the reaction was investigated. Various alcohols and phenols proceeded smoothly and led to corresponding β-alkoxyketones with high yields under mild reaction conditions, O-selectivity addition of aminoethanols was also achieved in this paper. Compared with traditional imidazolium ionic liquids, [NMP]H₂PO₄ gave the better results. The ionic liquid was stable and could be reused at least five times with a slight loss of activity.     

Microwave enhanced reduction of nitro and azido arenes to N-arylformamides employing Zn-HCOONH4: synthesis of 4(3H)-quinazolinones and pyrrolo[2,1-c][1,4]benzodiazepines

Microwave mediated reduction of nitro and azido arenes to N-arylformamides using Zn-HCOONH₄ is described. In the absence of microwave conditions, this methodology affords amines. This protocol has been extended to the synthesis of pyrrolo[2,1-c][1,4]benzodiazepines and 4(3H)-quinazolinones.     

A fast and highly efficient protocol for Michael addition of N-heterocycles to α,β-unsaturated compound using basic ionic liquid [bmIm]OH as catalyst and green solvent

A fast and green protocol for the Michael addition of N-heterocycles to α,β-unsaturated compounds at room temperature was developed using a basic ionic liquid, 1-methyl-3-butylimidazolium hydroxide, [bmIm]OH, as a catalyst and a reaction medium. The reactions were performed at room temperature with good yields in short reaction times (0.5-3 h). This strategy is quite general and it works with a broad range of N-heterocycles, including five-membered N-heterocycles, pyrimidines and purines. The recovered ionic liquid could be reused for several cycles with consistent activity.     

An ionic liquid-mediated expeditious route to the syntheses of diaryl sulfoxides

A fast and efficient protocol is proposed for the synthesis of diaryl sulfoxides in the ionic liquid 1-butyl-3-methylimidazolium chloroaluminate, [bmim]Cl·AlCl₃, N=0.67, by employing arenes and thionyl chloride. The ionic liquid plays a dual role of Lewis acid catalyst and solvent, under ambient conditions, offering good yields of the product. The influence of the Lewis acidity of the ionic liquid on the extent of conversion is studied.     

Selective alkylation of phenol with tert-butyl alcohol catalyzed by [bmim]PF6

Alkylation of phenol with tert-butyl alcohol (TBA) in a room temperature ionic liquid, 1-butyl-3-methylimidazoliumhexafluorophosphate ([bmim]PF₆), has been investigated. The effects of various parameters such as reaction temperature, reaction time, reactant ratio (mol ratio of phenol to that of TBA), and the amount of the ionic liquid used were studied. The [bmim]PF₆ ionic liquid was found to catalyze the reaction with high conversion and good selectivity.     

Ruthenium trichloride catalyzed synthesis of 2,3-unsaturated-N-glycosides via Ferrier azaglycosylation

An efficient, economical and mild protocol for the synthesis of 2,3-unsaturated-N-glycosides has been developed using ruthenium(III) chloride. The Ferrier azaglycosylation of glycals with various N-nucleophiles such as sulfonamides, benzamides, carbamates and N-substituted sulfonamides proceeded smoothly to afford the corresponding 2,3-unsaturated-N-glycosides or ‘N-pseudoglycals’ in good yields (64–98%). High α-anomeric selectivity was observed with N-substituted sulfonamides such as N-benzyl or N-phenyl sulfonamides under similar conditions.     

Facile synthesis of acyclic azanucleosides from N-pivaloyloxymethyl amides and sulfonamides: synthesis of aza-analogues of Ganciclovir

N-Pivaloyloxymethyl amides and sulfonamides, readily available from N-alkylation of both amides and sulfonamides with commercial chloromethyl pivaloate, were converted into acyclic azanucleosides via a one-pot base silylation/nucleoside coupling procedure.     

Highly selective acetoxylation of sulfonamides via using phenyliodine(III) diacetate

A highly efficient acetoxylation reaction of N-aryl-arylsulfonamides has been developed, presumably proceeding via the selective functionalization of N-aryl C–H bonds. A stoichiometric amount of PhI(OAc)₂ was generally employed as the oxidation reagent, and various para-acetoxylated sulfonamide derivatives had been generated in excellent yields. This chemistry endowed an economic synthesis of valuable acetoxylated sulfonamides through direct C–O bond formation processes.     

Synthesis of 2,6-diaryl-1,2-dihydropyridines through a 6π-electrocyclization of N-sulfonylazatrienes

The development of an efficient synthetic method toward substituted 1,2-dihydropyridines from cinnamylideneacetophenones is reported. The key intermediates N-sulfonylazatrienes were synthesized through a TiCl₄-mediated direct condensation of primary sulfonamides with the substituted (E,E)-cinnamylideneacetophenones. The 6π-electrocyclization of these intermediates, catalyzed by a Lewis acid, selectively afforded the desired products in good yields.     

Synthesis of rhodium N-heterocyclic carbene complexes and their catalytic activity in the hydrosilylation of alkenes in ionic liquid medium

Rhodium complexes bearing N-heterocyclic carbene (NHC) ligands were prepared from bis(η⁴-1,5-cyclooctadiene) dichlorodirhodium and 1-alkyl-3-methylimidazolium-2-carboxylate, and the catalytic properties of rhodium complexes prepared in the hydrosilylation of alkenes in ionic liquid media were investigated. It was found that both the catalytic activity and selectivity of the rhodium complexes bearing NHC ligands were influenced by the attached substituents of the imidazolium cation. Additionally, rhodium complexes bearing NHC ligands in ionic liquid BMimPF₆ could be reused without noticeable loss of catalytic activity and selectivity.     

Ambient synthesis of spiro[4H-pyran-oxindole] derivatives under [BMIm]BF4 catalysis

A simple and efficient one-pot approach for assembling some fused spiro[4H-pyran-oxindole] heterocycles by means of three-component reactions between isatins, malononitrile or ethyl cyano-acetate, and 1,3-dicarbonyl compounds is reported. The combinatorial syntheses were achieved for the first time without applying extra activation energy at ambient temperature while making use of [BMIm]BF₄ as an ionic liquid catalyst. Good functional group tolerance and broad scope of usable substrates are other prominent features of the present methodology.     

Boron trichloride as an efficient and selective agent for deprotection of tert-butyl aryl sulfonamides

A fast, mild and selective method for deprotection of tert-butyl aryl sulfonamides utilizing BCl₃ as deprotection reagent has been developed. A variety of tert-butyl aryl sulfonamides used under these conditions gave the corresponding primary sulfonamides in high yields. The method does not cleave methoxy groups and prevents incorporation of tert-butyl groups onto electron-rich aromatic rings.     

Rapid access to 3-(N-substituted)-aminoquinolin-2(1H)-ones using palladium-catalyzed C-N bond coupling reaction

A series of 3-(N-substituted)-aminoquinolin-2(1H)-ones have been synthesized by the palladium-catalyzed C-N coupling reaction starting from 3-bromoquinolin-2-(1H)-ones. Various nucleophiles including amines, amides, sulfonamides, carbamates and ureas have been used successfully. In all the cases, the reactions take place rapidly in 1,4-dioxane and proceed in good to excellent yield using palladium acetate as a catalyst, Xantphos as a ligand and Cs₂CO₃ as a base.     

A novel and efficient solvent-free and heterogeneous method for the synthesis of primary, secondary and bis-N-acylsulfonamides using metal hydrogen sulfate catalysts

Some metal hydrogen sulfates were used as acid catalysts in the N-acylation of different sulfonamides using carboxylic acid chlorides and anhydrides as acylating agents under both heterogeneous and solvent-free conditions. Al(HSO₄)₃ and Zr(HSO₄)₄ were found to have the highest activity and catalyze the reactions efficiently to furnish the primary N-acyl sulfonamides (RCONHSO₂R′), secondary N-acylsulfonamides (RCONR″SO₂R′) and bis-N-acylsulfonamnides [RCO(SO₂R′)N-R″-N(SO₂R′)COR] in good to high yield. The mild reaction conditions, inexpensive and low toxicity of catalysts and easy work-up procedure make this method attractive.     

N-Bromosuccinimide-mediated reaction of cyclic styrenes with chloramine-T

A facile route toward substituted allylic sulfonamides 3 is developed from the N-bromosuccinimide (NBS)-mediated allylic amination of cyclic styrenes 2 with chloramine-T (1a). Skeleton 2 is prepared by Grignard addition of cyclic ketones with different arylmagnesium bromides in THF followed by dehydration of the resulting tertiary alcohols with BF₃·OEt₂ in CH₂Cl₂. The synthetic route obtained moderate yields from the one-step operation and the key structures of skeleton 3 were confirmed by X-ray crystallographic analysis.     

Three-component green synthesis of N-arylquinoline derivatives in ionic liquid [Bmim][BF4]: reactions of arylaldehyde, 3-arylamino-5,5-dimethylcyclohex-2-enone, and active methylene compounds

Three series of N-arylquinoline derivatives were synthesized by the three-component reactions of arylaldehyde, 3-arylamino-5,5-dimethylcyclohex-2-enone, and active methylene compounds including malononitrile, meldrum's acid, and 1,3-indenedione in ionic liquid [bmim⁺][BF₄⁻] at 90 °C.     

Synthesis of cesium selective pyridyl azocalix[n]arenes

A series of pyridylazo calix[n]arenes (n=4, 6, 8) including the first examples of mixed hetroaryl azocalix(n)arenes have been synthesized by coupling calix[n]arenes with diazonium salts derived from amino pyridines. It has been observed that the coupling reaction of diazonium salt obtained from 3-aminopyridine with calix[n]arene gives tetrakis-, hexakis- and octakis (pyridylazo)calix[n]arenes (n=4,6,8) while those derived from 4-aminopyridine give partially substituted (4-pyridylazo)calix[n]arene analogs. There is no reaction of calix(n)arenes with diazonium salts derived from 2-aminopyridine under identical conditions of experiments. The conformational analysis of synthesized compounds have been ascertained by detailed spectral measurements and single crystal X-ray analysis of 5-(3′-pyridylazo)-25,26,27,28-tetrahydroxycalix[4]arene. A rational explanation for the observed partial and exhaustive coupling reaction in the synthesis of heteroaryl azocalix(n)arenes has been suggested. Preliminary evaluation of synthesized derivatives as molecular receptors for metal ions indicates that they have good potential to function as selective ionic filters for cesium ions.     

Acyclic tertiary diamines and 1,4,7,10-tetraazacyclododecane with fluorine-containing β-diketones: Leading to low melting ionic adducts

N,N,N′,N′-Tetramethylmethanediamine (1a), N,N,N′,N′-tetramethylethanediamine (1b), N,N,N′,N′-tetramethyl-1,3-propanediamine (1c), and N,N,N′,N′-tetramethyl-1,6-hexanediamine (1d) were reacted at 25 °C with 1,1,1,5,5,5-hexafluoro-2,4-pentanedione (2a), 2,2-dimethyl-6,6,7,7,8,8,8-heptafluoro-3,5-octanedione (2b), 2-thenoyltrifluoroacetone (2c), and 4,4,4-trifluoro-1-(2-furyl)-1,3-butanedione (2d) to form the ionic adducts 3-18. 1,4,7,10-Tetraazacyclododecane (1e) reacted at 25 °C with β-diketones (2a-d) and 1,1,1-trifluoro-2,4-pentanedione (2e) to give ionic solids 19-23 in good yields. Some of the products are liquid at 25 °C and are thermally stable over long liquid ranges as determined by thermal gravimetric analyses. Single-crystal X-ray structure determinations show that compounds 9 and 21 crystallize in the monoclinic space groups P2(1)/c and P2(1)/n, respectively. All the new compounds were characterized by ¹H, ¹⁹F and ¹³C NMR, electrospray MS and/or elemental analyses.     

Structure of N,C,N-chelated organotin(IV) fluorides

The set of starting tri-, di- and monoorganotin(IV) halides containing N,C,N-chelating ligand (L^NCN = {1,3-[(CH₃)₂NCH₂]₂C₆H₃}⁻) has been prepared (1-5) and two compounds structurally characterized ([L^NCNPh₂Sn]⁺I₃⁻ (1c), L^NCNSnBr₃ (5)) in the solid state. These compounds were reacted with KF with 18-crown-6, NH₄F or L^CNnBu₂SnF to give derivatives containing fluorine atom(s). Triorganotin(IV) fluorides L^NCNMe₂SnF (2a) and L^NCNnBu₂SnF (3a) revealed monomeric structural arrangement with covalent Sn-F bond both in the coordinating and non-coordinating solvents, except the behaviour of 3a that was ionized in the methanol solution at low temperature. The products of fluorination of L^NCNSnPhCl₂ (4) and 5 were described by NMR in solution as the ionic hypervalent fluorostannates or the oligomeric species reacting with chloroform, methanol or moisture to zwitterionic monomeric stannate L^NCN(H)⁺SnF₄⁻ (5c), which was confirmed by XRD analysis in the solid state.     

Direct syntheses of Lan+1NinO3n+1 phases (n=1, 2, 3 and ∞) from nanosized co-crystallites

A new direct route for the “bottom up” syntheses of phases in the La_n+1Ni_nO_3n+1 series (n=1, 2, 3 and ∞) has been achieved via single-step heat treatments of nanosized co-crystallized precursors. The co-crystallized precursors were prepared using a continuous hydrothermal flow synthesis system that uses a superheated water flow at ca. 400 °C and 24.1 MPa to produce nanoparticulate slurries. Overall, a significant reduction in time and number of steps for the syntheses of La₃Ni₂O₇ and La₄Ni₃O₁₀ was achieved compared with more conventional synthesis methods, which typically require multiple homogenization and reheating steps over several days.