Structural studies of phosphor-1,1-diselenoato Mn(I) and Re(I) complexes

Mononuclear complexes of the type, M(CO)₄[Se₂P(OR)₂] (M = Mn, R = ⁱPr, 1a; Et, 1b; M = Re, R = ⁱPr, 3a; Et, 3b) can be prepared from either [-Se(Se)P(OⁱPr)₂]₂ (A) or [Se{-Se(Se)P(OEt)₂}₂] (B) with M(CO)₅Br. O,O′-dialkyl diselenophosphate ([(RO)₂PSe₂]^-, abbreviated as dsep) ligands generated from A and B act as a chelating ligand in these complexes. Upon refluxing in acetonitrile, these mononuclear complexes yield dinuclear complexes with a general formula of [M₂(CO)₆{Se₂P(OR)₂}₂] (M = Mn, R = ⁱPr, 2a; Et, 2b; M = Re, R = ⁱPr, 4a; Et, 4b). Dsep ligands display a triconnective, bimetallic bonding mode in the dinuclear compounds and this kind of connective pattern has never been identified in any phosphor-1,1-diselenoato metal complexes. Compounds 2b, 3b, and 4 are structurally characterized. Compounds 2b and 3b display weak, secondary Se?Se interactions in their lattices.     

Substituted lithiumtrimethylsiloxysilanides LiSiRR′(OSiMe3) - Investigations of their synthesis, stability and reactivity

The reactions of the trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-h: R′ = Ph, 1a: R = H, 1b: R = Me, 1c: R = Et, 1d: R = ⁱPr, 1e: R = ^tBu, 1f: R = Ph, 1g: R = 2,4,6-Me₃C₆H₂ (Mes), 1h: R = 2,4,6-(Me₂CH)₃C₆H₂ (Tip); 1i: R = R′ = Mes) with lithium metal in tetrahydrofuran (THF) at −78 °C and in a mixture of THF/diethyl ether/n-pentane in a volume ratio 4:1:1 at −110 °C lead to mixtures of numerous compounds. Dependent on the substituents silyllithium derivatives (Me₃SiO)RR′SiLi (2b-i), Me₃SiO(RR′Si)₂Li (3a-g), Me₃SiRR′SiLi (4a-h), (LiO)RR′SiLi (12e, 12g-i), trisiloxanes (Me₃SiO)₂SiRR′ (5a-i) and trimethylsiloxydisilanes (6f^∗, 6h^∗, 6i^∗) are formed. All silyllithium compounds were trapped with Me₃SiCl or HMe₂SiCl resulting in the following products: (Me₃SiO)RR′SiSiMe₂R″ (6b-i: R″ = Me, 7c-i: R″ = H), Me₃SiO(RR′Si)₂SiMe₂R″ (8a-g: R″ = Me, 9a-g: R″ = H), Me₃SiRR′SiSiMe₂R″ (10a-h: R″ = Me, 11a-h: R″ = H) and (HMe₂SiO)RR′SiSiMe₂H (13e, 13g-i). The stability of trimethylsiloxysilyllithiums 2 depends on the substituents and on the temperature. (Me₃SiO)Mes₂SiLi (2i) is the most stable compound due to the high steric shielding of the silicon centre. The trimethylsiloxysilyllithiums 2a-g undergo partially self-condensation to afford the corresponding trimethylsiloxydisilanyllithiums Me₃SiO(RR′Si)₂Li (3a-g). (Me₃)Si-O bond cleavage was observed for 2e and 2g-i. The relatively stable trimethylsiloxysilyllithiums 2f, 2g and 2i react with n-butyllithium under nucleophilic butylation to give the n-butyl-substituted silyllithiums ⁿBuRR′SiLi (15g, 15f, 15i), which were trapped with Me₃SiCl. By reaction of 2g and 2i with 2,3-dimethylbuta-1,3-diene the corresponding 1,1-diarylsilacyclopentenes 17g and 17i are obtained.X-ray studies of 17g revealed a folded silacyclopentene ring with the silicon atom located 0.5 Å above the mean plane formed by the four carbon ring atoms.     

A “sodium trap” based on benzo-15-crown-5 with an exocyclic N-(thiophosphoryl)thiourea moiety

For N-(thio)phosphorylthioureas of the common formula RC(S)NHP(X)(OiPr)₂HL^I (R = N-(4′-aminobenzo-15-crown-5), X = S), HL^II (R = N-(4′-aminobenzo-15-crown-5), X = O), HL^III (R = PhNH, X = S), HL^IV (R = PhNH, X = O), and (N,N′-bis-[C(S)NHP(S)(OiPr)₂]₂-1,10-diaza-18-crown-6) H₂L^V, salts LiL^I,III,IV, NaL^I–IV, KL^I–IVM₂L^V (M = Li⁺, Na⁺, K⁺), Ba(L^I,III,IV)₂, and BaL^V have been synthesized and investigated. Compounds NaL^I,II quantitatively drop out as a deposit in ethanol medium, allowing the separation of Na⁺ and K⁺ cations. This effect is not displayed for the other compounds. The crystal structures of HL^III and the solvate of the composition [K(Me₂CO)L^III] have been investigated by X-ray crystallography.     

The (phosphino)tetraphenylborate ligand in ruthenium-arene chemistry

The synthesis of a series of anionic half-sandwich ruthenium-arene complexes [E][RuCl₂(η⁶-p-cymene){PR₂(p-Ph₃BC₆H₄)}] (E = Bu₄N⁺: R = Ph, 1a, ⁱPr, 1b or Cy, 1c; E = bis(triphenylphosphine)iminium or PNP⁺: R = Ph, 1a′, ⁱPr, 1b′ or Cy, 1c′) are reported. X-ray crystallographic studies of 1a′ and 1b′ confirmed the three-legged piano-stool coordination geometry. In solution, complexes 1a-c and 1a′-c′ are proposed to form monomer-dimer equilibria as a result of chloride ligand dissociation. Complexes 1a-c and 1a′-c′ also form the formally neutral zwitterionic complexes [RuCl(L)(η⁶-p-cymene){PR₂(p-Ph₃BC₆H₄)}] (L = pyridine: R = Ph, 2a, ⁱPr, 2b or Cy, 2c; L = MeCN: R = Ph, 3a, ⁱPr, 3b or Cy, 3c) via chloride ligand abstraction using AgNO₃ or MeOTf.     

Synthesis, characterization, and norbornene polymerization of η-benzylnickel(II) complexes of N-heterocyclic carbenes

Neutral η¹-benzylnickel carbene complexes, [Ni(η¹-CH₂C₆H₅)(IiPr)(PMe₃)(Cl)] (3) (IiPr = 1,3-bis-(2,6-diisopropylphenyl)imidazol-2-ylidene) and [Ni(η¹-CH₂C₆H₅)(SIiPr)(PMe₃)(Cl)] (4) (SIiPr = 1,3-bis-(2,6-diisopropylphenyl)imidazolin-2-ylidene), were prepared by the reaction between [Ni(η³-CH₂C₆H₅)(PMe₃)(Cl)] and an equivalent amount of the corresponding free N-heterocyclic carbene. The preparation of η³-benzylnickel carbene complexes, [Ni(η³-CH₂C₆H₅)(IiPr)(Cl)] (5) and [Ni(η³-CH₂C₆H₅)(SIiPr)(Cl)] (6) were carried out by the abstraction of PMe₃ from 3 and 4 by the treatment of B(C₆F₅)₃. The treatment of AgX on 5 and 6 produced the anion-exchanged complexes, [Ni(η³-CH₂C₆H₅)(NHC)(X)] (7, NHC = IiPr, X = O₂CCF₃; 8, NHC = IiPr, X = O₃SCF₃; 9, NHC = SIiPr, X = O₂CCF₃; 10, NHC = SIiPr, X = O₃SCF₃). The solid state structures of 3 and 10 were determined by X-ray crystallography. The η³-benzyl complexes of IiPr (5, 7, and 8) alone, in the absence of any activators such as borate and MAO, showed good catalytic activity towards the vinyl-type norbornene polymerization. The catalyst was thermally robust and the activity increases as the temperature rises to 130 °C.     

Electronically variable imino-phenanthrolinyl-cobalt complexes; synthesis, structures and ethylene oligomerisation studies

The 2-imino-1,10-phenanthroline ligands, 1,10-C₁₂H₇N₂-2-CRN(2,6-i-Pr₂-4-R¹-C₆H₂) [R = R¹ = H (L1); R = H, R¹ = Br (L2); R = H, R¹ = CN (L3); R = H, R¹ = i-Pr (L4); R = Me, R¹ = H (L5); R = Me, R¹ = i-Pr (L6)], have been prepared in high yield from the condensation reaction of 1,10-C₁₂H₇N₂-2-CRO (R = H, Me) with one equivalent of the corresponding 4-substituted 2,6-diisopropylaniline. The molecular structures of L2, L5 and L6 reveal the imino nitrogen atoms to adopt a transoid configuration with respect to the phenanthrolinyl nitrogen atoms. Treatment of Lx with one equivalent of CoCl₂ in n-BuOH at 90 °C gives the high spin complexes, (Lx)CoCl₂ [Lx = L1 (1a), L2 (1b), L3 (1c), L4 (1d), L5 (1e), L6 (1f)], in which the metal centres exhibit distorted square pyramidal geometries. Activation of 1a-1f with excess methylaluminoxane (MAO) gives catalysts that are modestly active for the oligomerisation of ethylene affording mainly linear α-olefins along with some degree of internal olefins. While the donor capability of the 4-position of the N-aryl group does not appear to affect the activity of the catalyst, it does have an influence on the ratio of α-olefins to internal olefins. Single crystal X-ray diffraction studies have been performed on L2, L5, L6, 1a, 1c and 1f.     

Synthesis of aluminium complexes bearing a piperazine-based ligand system

Aluminium complexes bearing the N,N-chelating ligand 1,4-bis(2-hydroxy-3,5-di-tert-butyl)piperazine (1) have been synthesised. Both monometallic and bimetallic aluminium methyl complexes (2 and 3, respectively) were prepared by treatment of 1 with the appropriate amount of AlMe₃. Complex 2 can be converted to 3 by addition of excess AlMe₃. Bimetallic aluminium-ethyl complex 4 was also prepared. Treatment of 1 with AlEt₂Cl afforded the monometallic chloride complex 5. Treatment of this latter complex with potassium alkoxides (KOR, R = Me, Et, ⁱPr, ^tBu) or AgOTf afforded the corresponding aluminium alkoxide complexes (6, R = Et; 7, R = Me; 8, R = ⁱPr; 9, R = ^tBu; 10, R = OTf) in good yields. Aluminium ethoxide complex 6 was also synthesised by treatment of 1 with AlEt₂OEt. All of these complexes were tested as potential catalysts in the ring-opening polymerisation of rac-lactide and caprolactone with limited success.     

Reactions of trimethylsiloxychlorosilanes with lithium metal - On the mechanism of the formation of trimethylsiloxysilyllithium compounds LiSiRR’(OSiMe3)

The reaction pathway for the formation of the trimethylsiloxysilyllithium compounds (Me₃SiO)RR′SiLi (2a: R = Et, 2b: R = ⁱPr, 2c: R = 2,4,6-Me₃C₆H₂ (Mes); 2a-c: R′ = Ph; 2d: R = R′ = Mes) starting from the conversion of the corresponding trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-d) in the presence of excess lithium in a mixture of THF/diethyl ether/n-pentane at −110 °C was investigated.The trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a: R = Et, 1b: R = ⁱPr, 1c: R = Mes) react with lithium to give initially the trimethylsiloxysilyllithium compounds (Me₃SiO)RPhSiLi (2a-c). These siloxysilyllithiums 2 couple partially with more trimethylsiloxychlorosilanes 1 to produce the siloxydisilanes (Me₃SiO)RPhSi-SiPhR(OSiMe₃) (Ia-c), and they undergo bimolecular self-condensation affording the trimethylsiloxydisilanyllithium compounds (Me₃SiO)RPhSi-RPhSiLi (3a-c). The siloxydisilanes I are cleaved by excess of lithium to give the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2). In the case of the two trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a: R = Et, 3b: R = ⁱPr) a reaction with more trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a, 1b) takes place under formation of siloxytrisilanes (Me₃SiO)RPhSi-RPhSi-SiPhR(OSiMe₃) (IIa: R = Et, IIb: R = ⁱPr) which are cleaved by lithium to yield the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2a, 2b) and the trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a, 3b). The dimesityl-trimethylsiloxy-silyllithium (Me₃SiO)Mes₂SiLi (2d) was obtained directly by reaction of the trimethylsiloxychlorosilane (Me₃SiO)Mes₂SiCl (1d) and lithium without formation of the siloxydisilane intermediate. Both silyllithium compounds 2 and 3 were trapped with HMe₂SiCl giving the products (Me₃SiO)RR′Si-SiMe₂H and (Me₃SiO)RPhSi-RPhSi-SiMe₂H.     

Synthesis and reactivity of asymmetrically substituted ansa-bridged zirconocene complexes: X-ray crystal structures of [Zr{R(H)C(η-C5Me4)(η-C5H4)}Cl2] (R = Bu, Bu) and [Zr{Bu(H)C(η-C5Me4)(η-C5H4)}(CH2Ph)2]

The dialkyl complexes, (R = Prⁱ, R′ = Me (2a), CH₂Ph (3a); R = Buⁿ, R′ = Me (2b), CH₂Ph (3b); R = Bu^t, R′ = Me (2c), CH₂Ph (3c); R = Ph, R′ = Me (2d), CH₂Ph (3d)), have been synthesized by the reaction of the ansa-metallocene dichloride complex, [Zr{R(H)C(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] (R = Prⁱ (1a), Buⁿ (1b), Bu^t (1c), Ph (1d)), and two molar equivalents of the alkyl Gringard reagent. The insertion reaction of the isocyanide reagent, CNC₆H₃Me₂-2,6, into the zirconium-carbon σ-bond of 2 gave the corresponding η²-iminoacyl derivatives, [Zr{R(H)C(η⁵-C₅Me₄)(η⁵-C₅H₄)}{η²-MeCNC₆H₃Me₂-2,6}Me] (R = Prⁱ (4a), Buⁿ (4b), Bu^t (4c), Ph (4d)). The molecular structures of 1b, 1c and 3b have been determined by single-crystal X-ray diffraction studies.     

Mono and dinuclear half-sandwich platinum group metal complexes bearing pyrazolyl-pyrimidine ligands: Syntheses and structural studies

Reactions of 0.5 eq. of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ (arene = η⁶-C₆H₆, η⁶-p-ⁱPrC₆H₄Me) and [(Cp∗)M(μ-Cl)Cl]₂ (M = Rh, Ir; Cp∗ = η⁵-C₅Me₅) with 4,6-disubstituted pyrazolyl-pyrimidine ligands (L) viz. 4,6-bis(pyrazolyl)pyrimidine (L1), 4,6-bis(3-methyl-pyrazolyl)pyrimidine (L2), 4,6-bis(3,5-dimethyl-pyrazolyl)pyrimidine (L3) lead to the formation of the cationic mononuclear complexes [(η⁶-C₆H₆)Ru(L)Cl]⁺ (L = L1, 1; L2, 2; L3, 3), [(η⁶-p-ⁱPrC₆H₄Me)Ru(L)Cl]⁺ (L = L1, 4; L2, 5; L3, 6), [(Cp∗)Rh(L)Cl]⁺ (L = L1, 7; L2, 8; L3, 9) and [(Cp∗)Ir(L)Cl]⁺ (L = L1, 10; L2, 11; L3, 12), while reactions with 1.0 eq. of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ and [(Cp∗)M(μ-Cl)Cl]₂ give rise to the dicationic dinuclear complexes [{(η⁶-C₆H₆)RuCl}₂(L)]²⁺ (L = L1, 13; L2, 14; L3, 15), [{(η⁶-p-ⁱPrC₆H₄Me)RuCl}₂(L)]²⁺ (L = L1, 16; L2, 17; L3, 18), [{(Cp∗)RhCl}₂(L)]²⁺ (L = L1, 19; L2, 20; L3, 21) and [{(Cp∗)IrCl}₂(L)]²⁺ (L = L1 22; L2, 23; L3 24). The molecular structures of [3]PF₆, [6]PF₆, [7]PF₆ and [18](PF₆)₂ have been established by single crystal X-ray structure analysis.     

Synthesis and DNA cleavage properties of ternary Cu(II) complexes containing histamine and amino acids

The ternary complexes of [Cu^II(Hist)(Tyr)]⁺1 and [Cu^II(Hist)(Trp)]⁺2 have been synthesized, structurally characterized and their DNA binding and cleavage abilities probed. The intrinsic binding constants (K_b) for complexes/CT-DNA were also determined (K_b = 2.7 × 10² for complex 1 and K_b = 2.2 × 10² for complex 2). These complexes exhibit their nuclease activity on plasmid DNA, which seems to depend on the nature of the aromatic moiety. The DNA hydrolytic cleavage rate constants were also determined for complexes 1 and 2, which are 0.91 and 0.79 h⁻¹, respectively.     

Synthesis and evaluation of new 4-phospho-d-erythronic acid derivatives as competitive inhibitors of spinach ribose-5-phosphate isomerase

This paper reports the synthesis of new 4-phospho-d-erythronic acid derivatives, namely 4-phospho-d-erythronohydroxamic acid (1), 4-phospho-d-erythronohydrazide (2), and 4-phospho-d-erythronamide (3), and their kinetic evaluation as new competitive inhibitors of the isomerization reaction between d-ribose 5-phosphate and d-ribulose 5-phosphate catalyzed by spinach ribose-5-phosphate isomerase (RPI). By comparison to the only known RPI inhibitor, 4-phospho-d-erythronate (4, K_i=28 μM, K_m/K_i=270), the hydroxamic acid 1, obtained by an eight-step synthesis from d-arabinose, appears as a new potent high-energy intermediate analogue inhibitor of the isomerization reaction (K_i=29 μM, K_m/K_i=260).     

Iron(0) and ruthenium(0) complexes with tridentate phosphonite ligands and their potential for ketene formation from methyl iodide, CO and a base

An efficient route to the novel tridentate phosphine ligands RP[CH₂CH₂CH₂P(OR′)₂]₂ (I: R = Ph; R′ = i-Pr; II: R = Cy; R′ = i-Pr; III: R = Ph; R′ = Me and IV: R = Cy; R′ = Me) has been developed. The corresponding ruthenium and iron dicarbonyl complexes M(triphos)(CO)₂ (1: M = Ru; triphos = I; 2: M = Ru; triphos = II; 3: M = Ru; triphos = III; 4: M = Ru; triphos = IV; 5: M = Fe; triphos = I; 6: M = Fe; triphos = II; 7: M = Fe; triphos = III and 8: M = Fe; triphos = IV) have been prepared and fully characterized. The structures of 1, 3 and 5 have been established by X-ray diffraction studies. The oxidative addition of MeI to 1-8 produces a mixture of the corresponding isomeric octahedral cationic complexes mer,trans-(13a-20a) and mer,cis-[M(Me)(triphos)(CO)₂]I (13b-20b) (M = Ru, Fe; triphos = I-IV). The structures of 13a and 20a (as the tetraphenylborate salt (21)) have been verified by X-ray diffraction studies. The oxidative addition of other alkyl iodides (EtI, i-PrI and n-PrI) to 1-8 did not afford the corresponding alkyl metal complexes and rather the cationic octahedral iodo complexes mer,cis-[M(I)(triphos)(CO)₂]I (22-29) (M = Ru, Fe; triphos = I-IV) were produced. Complexes 22-29 could also be obtained by the addition of a stoichiometric amount of I₂ to 1-8. The structure of 22 has been verified by an X-ray diffraction study. Reaction of 13a/b-20a/b with CO afforded the acetyl complexes mer,trans-[M(COMe)(triphos)(CO)₂]I, 30-37, respectively (M = Ru, Fe; triphos = I-IV). The ruthenium acetyl complexes 30-33 reacted slowly with 2-tert-butylimino-2-diethylamino-1,3-dimethylperhydro-1,3,2-diazaphosphorine (BEMP) even in boiling acetonitrile. Under the same conditions, the deprotonation reactions of the iron acetyl complexes 34-37 were completed within 24-40 h to afford the corresponding zero valent complexes 5-8. It was not possible to observe the intermediate ketene complexes. Tracing of the released ketene was attempted by deprotonation studies on the labelled species mer,trans-[Fe(COCD₃)(triphos)(CO)₂]I (38) and mer,trans-[Fe(¹³COMe)(triphos)(CO)₂]I (39).     

Au(I) and Au(III) complexes of a sterically bulky benzimidazole-derived N-heterocyclic carbene

The reaction of [AuCl(SMe₂)] with in situ generated [AgCl(ⁱPr₂-bimy)] (ⁱPr₂-bimy = 1,3-diisopropylbenzimidazolin-2-ylidene), which in turn was obtained by the reaction of Ag₂O with 1,3-diisopropylbenzimidazolium bromide (ⁱPr₂-bimyH⁺Br⁻, A), afforded the monocarbene Au(I) complex [AuCl(ⁱPr₂-bimy)] (1). Subsequent reaction of 1 and the ligand precursor ⁱPr₂-bimyH⁺BF₄⁻, (B) in acetone in the presence of K₂CO₃ yielded the bis(carbene) complex [Au(ⁱPr₂-bimy)₂]BF₄ (2) as a white powder in 80% yield. The oxidative addition of elemental iodine to complex 2 gave the bis(carbene) Au(III) complex trans-[AuI₂(ⁱPr₂-bimy)₂]BF₄ (3) as an orange-red powder in 92% yield. All complexes 1-3 have been fully characterized by multinuclear NMR spectroscopies, ESI mass spectrometry, elemental analysis, and X-ray single crystal diffraction. Complexes 1 and 2 adopt a linear geometry around metal centers as expected for d¹⁰ metals. The geometry around the Au(III) metal center in 3 is essentially square-planar with two carbene ligands in trans-position to each other. Complex 3 shows absorption and photoluminescence properties owing to a ligand to metal charge transfer.     

Arene ruthenium β-diketonato triazolato derivatives: Synthesis and spectral studies (β-diketones: 1-phenyl-3-methyl-4-benzoyl pyrazol-5-one, acetylacetone derivatives)

Mononuclear neutral arene ruthenium(II) β-diketonato complexes of the general formula (η⁶-arene)Ru(LL)Cl [LL = 1-phenyl-3-methyl-4-benzoyl pyrazol-5-one (L1), arene = C₆H₆ (1), p-ⁱPrC₆H₄Me (2), C₆Me₆ (3); arene = p-ⁱPrC₆H₄Me, LL = 1-benzoylacetone (L3) (8); arene = p-ⁱPrC₆H₄Me, LL = dibenzoylmethane (L4) (9)] have been synthesized and their subsequent substitution reactions with NaN₃ in alcohol at room temperature yielded the corresponding neutral terminal azido complexes (η⁶-arene)Ru(LL)N₃ [LL = 1-phenyl-3-methyl-4-benzoyl pyrazol-5-one (L1), arene = C₆H₆ (4), p-ⁱPrC₆H₄Me (6), C₆Me₆ (7); arene = p-ⁱPrC₆H₄Me, LL = dibenzoylmethane (L4) (10)] as well as a cationic complex [(η⁶-p-ⁱPrC₆H₄Me)Ru(L4) (PPh₃)]BF₄ (12) with PPh₃. The [3 + 2] cycloaddition reaction of selective azido complexes with the activated alkynes dimethyl and diethyl acetylenedicarboxylates produced the arene triazolato complexes [(η⁶-arene)Ru(LL){N₃C₂(CO₂R)₂}] [arene = p-ⁱPrC₆H₄Me, LL = L1, R = Me (13); arene = C₆Me₆, LL = L1, R = Me (14); arene = C₆Me₆, LL = acetyl acetone (L2), R = Me (15); arene = C₆Me₆, LL = L3, R = Me (16); arene = p-ⁱPrC₆H₄Me, LL = L1, R = Et (17); arene = C₆Me₆, LL = L1, R = Et (18); arene = C₆Me₆, LL = L2, R = Et (19); arene = C₆Me₆, LL = L3, R = Et (20)]. With fumaronitrile the reaction yielded the triazoles [(η⁶-arene)Ru(LL)(N₃C₂HCN)] [arene = p-ⁱPrC₆H₄Me, LL = L1 (21), arene = C₆Me₆, LL = L1 (22), arene = C₆Me₆, LL = L2 (23), arene = C₆Me₆, LL = L3 (24)]. In the above triazolato complexes only N(2) isomer was obtained. The complexes were characterized on the basis of spectroscopic data. Crystal structure of representatives complexes were determined by single crystal X-ray diffraction.     

Allylpalladium (II) complexes with dichalcogenoimidodiphosphinate ligands: Synthesis, structure, spectroscopy and their transformation into palladium chalcogenides

The synthesis, characterization and thermal behavior of new monomeric allylpalladium (II) complexes with dichalcogenoamidodiphosphinate anions are reported. The complexes [R = H, R′ = Prⁱ, E = S (1a); R = H, R′ = Prⁱ, E = Se (1b); R = H, R′ = Ph, E = S (1c); R = H, R′ = Ph, E = Se (1d); R = Me, R′ = Prⁱ, E = S (2a); R = Me, R′ = Prⁱ, E = Se (2b); R = Me, R′ = Ph, E = S (2c); R = Me, R′ = Ph, E = Se (2d)] have been prepared by room temperature reaction of [Pd(η³-CH₂C(R)CH₂)(acac)] (acac = acetylacetonate) with dichalcogenoimidodiphosphinic acids in acetonitrile solution. The complexes have been characterized by multinuclear NMR (¹H, ¹³C{¹H}, ³¹P{¹H}, ⁷⁷Se{¹H}), FT-IR and elemental analyses. The crystal structures of complexes 1a, 1d and 2d have been reported and they consist of a six-membered PdE₂P₂N ring (E = S for 1a and Se for 1d and 2d) and an allyl group, C₃H₄R(R = H for 1a and 1d and Me for 2d). Thermogravimetric studies have been carried out for few representative complexes. The complexes thermally decompose in argon atmosphere to leave a residue of palladium chalcogenides, which have been characterized by PXRD, SEM and EDS.     

Palladium(II)/allylpalladium(II) complexes with xanthate ligands: Single-source precursors for the generation of palladium sulfide nanocrystals

In an effort to find simple and common single-source precursors for palladium sulfide nanostructures, palladium(II) complexes, [Pd(S₂X)₂] (X = COMe (1), COⁱPr (2)) and η³-allylpalladium complexes with xanthate ligands, [(η³-CH₂C(CH₃)CR₂)Pd(S₂X)] (R = H, X = COMe (3); R = H, X = COEt (4); R = H, X = COⁱPr (5); R = CH₃, X = COMe (6)), have been investigated. The crystal structures of [Pd(S₂X)₂] (X = COMe (1), CoⁱPr (2)) and [(η³-CH₂C(CH₃)CH₂)Pd(S₂COMe)] (3) have been established by single crystal X-ray diffraction analysis. The complexes, 1, 2 and 3 all contain a square planar palladium(II) centre. In the allyl complex 3, this is defined by the two sulfurs of the xanthate and the outer carbons of the 2-methylallyl ligand, while in the complexes, 1 and 2 it is defined by the four sulfur atoms of the xanthate ligand. Thermogravimetric studies have been carried out to evaluate the thermal stability of η³-allylpalladium(II) analogues. The complexes are useful precursors for the growth of nanocrystals of PdS either by furnace decomposition or solvothermolysis in dioctyl ether. The solvothermal decomposition of complexes in dioctyl ether gives a new metastable phase of PdS which can be transformed to the more stable tetragonal phase at 320 °C. The nanocrystals obtained have been characterized by PXRD, SEM, TEM and EDX.     

Synthesis of the first examples of stable heterometallic isopropoxides of an organometallic RSn(IV) moiety

Five-, six-, and seven-coordinate volatile butyltin(IV) heterobimetallic derivatives, respectively of the types, [BuSn{(μ-OPrⁱ)₂Al(OPrⁱ)₂}Cl₂] (1), [BuSn{(μ-OPrⁱ)₂Al(OPrⁱ)₂}₂Cl] (2), and BuSn{(μ-OPrⁱ)₂M(OPrⁱ)_x − 2}₃ (3:M = Al (x = 4); 4:M = Ga (x = 4); 5:M = Nb (x = 6)) have been synthesized by the reactions of BuSnCl₃ with potassium tetraisopropoxoaluminate in 1:1, 1:2, and 1:3 molar ratios. Replacement reactions of chloride in (1) and (2) with appropriate alkoxometallate (tetraisopropoxoaluminate, tetraisopropoxogallate, or hexaisopropoxoniobate) ligands result in the formation of novel BuSn(IV) heterotri- and tetra-metallic derivatives. All of these derivatives have been characterized by elemental analyses, molecular weight measurements, and spectroscopic (IR, ¹H, ²⁷Al, and ¹¹⁹Sn NMR) studies. Based on these studies, plausible structures for the new derivatives involving bidentate ligation of the alkoxometallate ligands have been suggested.     

Selective synthesis of monomeric or dimeric titanatranes via fine tuning in triethanolateamine ligand

Monomeric titanatrane i-PrOTi(OCMe₂CH₂)₃N (1) and dimeric titanatranes [i-PrOTi(OCH₂CH₂)_nN(CH₂CMe₂O)_3−n]₂ (n = 1, 2; n = 2, 3) were synthesized by the reaction of Ti(O-i-Pr)₄ with a series of triethanolateamines such as (OCH₂CH₂)_nN(CH₂CMe₂O)_3−n³⁻ (n = 0, Lig¹; n = 1, Lig²; n = 2, Lig³), which vary by the number of CMe₂ groups adjacent to a OH functionality from 3 (Lig¹H₃) to 2 (Lig²H₃) to 1 (Lig³H₃). The resultant titanatranes 1–3 have been characterized by solution ¹H and ¹³C{¹H} NMR and their solid state structures have been determined by X-ray crystallography. Whereas compound 1 is monomeric in the solid state, compounds 2 and 3 are dimeric, due to the reduction of the steric congestion in the vicinity of the Ti.     

Cyclopentadienylaluminum thiolates - synthesis and structure

The dicyclopentadienylaluminum thiolates [Cp₂Al(μ-SR)]₂, where R = Et (1), ⁱPr (2), were obtained by reacting Cl₂AlSR with CpNa at the molar ratio 1:2, respectively. Use of CpLi instead of CpNa at the same molar ratio of reagents leads to the formation of cyclopentadienyl(chloro)aluminum thiolates [Cp(Cl)Al(μ-SR)]₂, exclusively, where R = Et (3), ⁱPr (4), ⁱBu (5), and ⁿBu (6). The compounds were characterized by ¹H, ¹³C, and ²⁷Al NMR spectroscopy. The structures of the compounds 1 and 4 were determined by X-ray crystallography.