Preparation of new pyrido[3,4-b]thienopyrroles and pyrido[4,3-e]thienopyridazines

Two new types of pyrido-fused tris-heterocycles (1a,b and 2a,b) have been prepared from 3-aminopyridine in five/six steps. A synthetic strategy for the preparation of the novel pyrido[3,4-b]thieno[2,3- and 3,2-d]pyrroles (1a,b) and pyrido[4,3-e]thieno[2,3- and 3,2-c]pyridazines (2a,b) has been studied. The Suzuki cross coupling of the appropriate 2- and 3-thienoboronic acids (3,4) and 4-bromo-3-pyridylpivaloylamide (9) afforded the biaryl coupling products (10,11) in high yields (85%). Diazotization of the hydrolysed (2-thienyl)-coupling product (12) and azide substitution gave the 3-azido-4-(2-thienyl)pyridine intermediate (72%, 14). 3-Azido-4-(3-thienyl)pyridine (15) was prepared by exchanging the previous order of reactions. The desired β-carboline thiophene analogues (1a,b) were obtained via the nitrene by thermal decomposition of the azido precursors (14,15). By optimising conditions for intramolecular diazocoupling, the corresponding pyridazine products (72-83%, 2a,b) were afforded.     

Synthesis, structures and rac/meso isomerization behaviour of bisplanar chiral bis(phosphino-η-indenyl)iron(II) complexes

Syntheses of the phosphinoindenes 1-(diphenylphosphino)-3-methylindene (1b), 3-(diphenylphosphino)-2-methylindene (1c), 1-(diphenylphosphino)-2,3-dimethylindene (1d), 4,7-dimethyl-3-(diphenylphosphino)indene (1e), 1-(diphenylphosphino)-3,4,7-trimethylindene (1f) and 3-(diisopropylphosphino)indene (1i) were carried out by treatment of the appropriate indenide with the appropriate chlorophosphine. The silylphosphinoindene 3-(diphenylphosphino)-1-(trimethylsilyl)indene (1h) was prepared by treatment of the indenide of 3-(diphenylphosphino)indene (1a) with trimethylsilylchloride. These indenes, in addition to 1a, were then used, after deprotonation with BuLi, to prepare the corresponding indenyl ferrocenes, 2a-2e, 2h and 2i, by treatment with ferrous chloride in a 2:1 ratio. These compounds were characterized by ¹H, ¹³C, and ³¹P NMR spectroscopy, as well as by mass spectrometry, except for the highly-sensitive diisopropylphosphine 2i that could only be characterized by ³¹P NMR spectroscopy. All of these ferrocene complexes are bisplanar chiral systems that can potentially form rac and meso isomers. In all cases both isomers were observed but for 2b and 2h only one could be isolated. The rac isomers of complexes 2a, 2b, 2d, and 2e, as well as the meso isomer of 2e, were studied by X-ray crystallography. Only complexes 2a and 2i were observed to undergo rac/meso isomerization processes at ambient temperature in THF solvent. We were unable to prepare the sterically congested hexamethylferrocene 2f. Generally, it was found that increasing substitution on the indenyl ring increases the reactivity and sensitivity of the ferrocene.     

Solvent-free reactions of N,N′-thiocarbonyldiimidazole with ferrocenylcarbinols

The efficient and simple routes for the synthesis of various ferrocenyl derivatives from ferrocenylcarbinols and N,N′-thiocarbonyldiimidazole (TCDI) are described. It involves grinding the two substrates in a Pyrex tube with a glass rod at room temperature. The reaction of ferrocenylmethanol (1a) provided S,S-bis(ferrocenylmethyl)dithiocarbonate (1b), whose crystal structure and a plausible mechanism for its formation are also reported. The reaction of 1-ferrocenyl-1-phenylmethanol (2a) and 1-ferrocenylbutanol (2b) gave the products 2c and 2d, respectively. The reaction of ω-ferrocenyl alcohols 4-ferrocenylphenol (3a) and 6-ferrocenylhexan-1-ol (3b) yielded the products 3c and 3d, respectively. Reaction of 1,1′-ferrocenedimethanol (3e) afforded 3f in moderate yield, and by contrast, it was not similar to 1b. Reaction of [4-(trifluoromethyl)phenyl]methanol (4a) provided the thiocarbonate 4b in good yield.     

Microwave-assisted synthesis of novel bis(2-thioxothiazolidin-4-one) derivatives as potential GSK-3 inhibitors

(5Z,5′Z)-3,3′-(1,4-Phenylenebis(methylene)-bis-(5-arylidene-2-thioxothiazolidin-4-one) derivatives (5a-r) have been synthesized by the condensation reaction of 3,3′-(1,4- or 1,3-phenylenebis(methylene))bis(2-thioxothiazolidin-4-ones) (3a,b) with suitably substituted aldehydes (4a-f) or 2-(1H-indol-3-yl)2-oxoacetaldehydes (8a-c) under microwave conditions. The bis(2-thioxothiazolidin-4-ones) were prepared from the corresponding primary alkyl amines (1a,b) and di-(carboxymethyl)-trithiocarbonyl (2). The 2-(1H-indol-3-yl)-2-oxoacetaldehydes (8a-c) were synthesized from the corresponding acid chlorides (7a-c) using HSnBu₃.     

Rhodium(I) complexes with κP coordinated ω-phosphinofunctionalized alkyl phenyl sulfide, sulfoxide and sulfone ligands and their reactions with sodium bis(trimethylsilyl)amide and Ag[BF4]

Reactions of ω-diphenylphosphinofunctionalized alkyl phenyl sulfides Ph₂P(CH₂)_nSPh (n = 1, 1a; 2, 2a; 3, 3a), sulfoxides Ph₂P(CH₂)_nS(O)Ph (n = 1, 1b; 2, 2b; 3, 3b) and sulfones Ph₂P(CH₂)_nS(O)₂Ph (n = 1, 1c; 2, 2c; 3, 3c) with dinuclear chlorido bridged rhodium(I) complexes [(RhL₂)₂(μ-Cl)₂] (L₂ = cycloocta-1.5-diene, cod, 4; bis(diphenylphosphino)ethane, dppe, 5) afforded mononuclear Rh(I) complexes of the type [RhCl{Ph₂P(CH₂)_nS(O)_xPh-κP}(cod)]¹ (n/x = 1/0, 6a; 1/1, 6b; 1/2, 6c; 2/0, 8a; 2/1, 8b; 2/2, 8c; 3/0, 10a; 3/1, 10b; 3/2, 10c) and [RhCl{Ph₂P(CH₂)_nS(O)_xPh-κP}(dppe)] (n/x = 1/0, 7a; 1/1, 7b; 1/2, 7c; 2/0, 9a; 2/1, 9b; 2/2, 9c; 3/0, 11a; 3/1, 11b; 3/2, 11c) having the P^S(O)_x ligands κP coordinated. Addition of Ag[BF₄] to complexes 6-11 in CH₂Cl₂ led with precipitation of AgCl to cationic rhodium complexes of the type [Rh{Ph₂P(CH₂)_nS(O)_xPh-κP,κS/O}L₂][BF₄] having bound the P^S(O)_x ligands bidentately in a κP,κS (13a-18a, 15b-18b) or a κP,κO (13b, 14b, 13c-18c) coordination mode. Unexpectedly, the addition of Ag[BF₄] to 6a in THF afforded the trinuclear cationic rhodium(I) complex [Rh₃(μ-Cl)(μ-Ph₂PCH₂SPh-κP:κS)₄][BF₄]₂·4THF (12·4THF) with a four-membered Rh₃Cl ring as basic framework. Addition of sodium bis(trimethylsilyl)amide to complexes 6-11 led to a selective deprotonation of the carbon atom neighbored to the S(O)_x group (α-C) yielding three different types of organorhodium complexes: a) Organorhodium intramolecular coordination compounds of the type [Rh{CH{S(O)_xPh}CH₂CH₂PPh₂-κC,κP}L₂] (22a-c, 23a-c), b) zwitterionic complexes [Rh{Ph₂PCHS(O)_xPh-κP,κS/O}L₂] having κP,κS (21a, 21b) and κP,κO (20b/c, 21c) coordinated anionic [Ph₂PCHS(O)_xPh] ligands, and c) the dinuclear rhodium(I) complex [{Rh{μ-CH(SPh)PPh₂-κC:κP}(cod)}₂] (19). All complexes were fully characterized spectroscopically and complexes 15b, 15c, 12·4THF and 19·THF additionally by X-ray diffraction analysis. DFT calculations of zwitterionic complexes gave insight into the coordination mode of the [Ph₂PCHS(O)Ph] ligand (κP,κS versus κP,κO).     

Bioactive meroditerpenes and indole alkaloids from the soil fungus Neosartorya fischeri (KUFC 6344), and the marine-derived fungi Neosartorya laciniosa (KUFC 7896) and Neosartorya tsunodae (KUFC 9213)

Two new metabolites including a new aszonalenin analogue (1c) and a new meroditerpene (3) were isolated, together with aszonalenin (1a), acetylaszonalenin (1b), 13-oxofumitremorgin B (2), aszonapyrone A (4b) and helvolic acid, from the culture of the soil fungus Neosartorya fischeri (KUFC 6344). While the ethyl acetate extract of the culture of the diseased coral-derived fungus Neosartorya laciniosa (KUFC 7896) furnished aszonapyrone B (4a), aszonapyrone A (4b), tryptoquivaline L and 3′-(4-oxoquinazolin-3-yl) spiro[1H-indole-3,5′-oxolane]-2,2′-dione, the ethyl acetate extract of the culture of the marine sponge-associated fungus Neosartorya tsunodae (KUFC 9213) yielded a new analogue of chevalone C (5) and helvolic acid. The structures of the new compounds were established based on 1D and 2D NMR spectral analysis as well as HR-ESIMS. Compounds 1a–c, 2, 3, 4a, 4b and 5 were evaluated for their in vitro growth inhibitory activity on the MCF-7 (breast adenocarcinoma), NCI-H460 (non-small cell lung cancer) and A375-C5 (melanoma) cell lines by the protein binding dye SRB method.     

An unexpected formation of pyrazolopyrimidines during the attempted to obtain 5-substituted tetrazoles from carbonitriles

In this Letter, we described the synthesis of new 5-(5-amino-1-aryl-1H-pyrazole-4-yl)-1H-tetrazoles 2a–c from 5-amino-1-aryl-1H-pyrazole-4-carbonitriles 1a–c as well as the unexpected 1H-pyrazolo[3,4-d]pyrimidine derivatives 6a–c from 5-amino-1-aryl-3-methyl-1H-pyrazole-4-carbonitriles 4a–c, instead of 5-(5-amino-1-aryl-3-methyl-1H-pyrazole-4-yl)-1H-tetrazoles 5a–c as desired. In an attempt to obtain these tetrazole derivatives containing the methyl group at C3-position in the pyrazole ring, the amino group in 5-amino-1-(4-methoxyphenyl)-3-methyl-1H-pyrazole-4-carbonitrile 4c was protected by the reaction with sodium hydride and di-tert-butyl-dicarbonate (Boc). The tetrazole derivative 5c was synthesized from the protected compound 7c using analogue methodology to obtain 2a–c and 6a–c.     

Novel synthesis of 2,4-bis(2-pyridyl)-5-(pyridyl)imidazoles and formation of N-(3-(pyridyl)imidazo[1,5-a]pyridine)picolinamidines: nitrogen-rich ligands

Heating a neat 1:2 mixture of 2-picolylamine and 2-cyanopyridine followed by treatment of the resultant red gummy substance with aqueous KOH resulted in the isolation of 2,4,5-tris(2-pyridyl)imidazole (1a) as the major product and N-(3-(2-pyridyl)imidazo[1,5-a]pyridine)picolinamidine (2a) in small amounts. Similarly, by using 3-picolylamine, 2,4,-bis(2-pyridyl)-5-(3-pyridyl)imidazole (1b) and N-(3-(3-pyridyl)imidazo[1,5-a]pyridine)picolinamidine (2b) were isolated, and by using 4-picolylamine, 2,4,-bis(2-pyridyl)-5-(4-pyridyl)imidazole (1c) and N-(3-(4-pyridyl)imidazo[1,5-a]pyridine)picolinamidine (2c) were isolated. The plausible mechanism of the formation of 1a-c and 2a-c is delineated.     

Unambiguous structure elucidation of the reaction products of 3-acyl-4-methoxy-1-methylquinolinones with hydroxylamine via NMR spectroscopy

Reaction of 3-acyl-4-methoxy-1-methylquinolinones 2a,b with hydroxylamine has been investigated under different experimental conditions. Whereas compound 2a gives rise selectively and exclusively to the regioisomeric isoxazolo[4,5-c]- or isoxazolo[4,3-c]quinolin-4(5H)one (compound 3a or 4a, respectively), reaction of 2b always led to a mixture of the required isoxazole together with the oxazole derivative. Structural elucidation of all products has been independently achieved by multinuclear (¹³C and ¹⁵N) magnetic resonance spectroscopy.     

Gold(I) N-heterocyclic carbene based initiators for bulk ring-opening polymerization of l-lactide

Synthesis, structures, and catalysis studies of gold(I) complexes of N-heterocyclic carbenes namely, a di-O-functionalized [1-(2-hydroxy-cyclohexyl)-3-(acetophenone)imidazol-2-ylidene], a mono-O-functionalized [1-(2-hydroxy-cyclohexyl)-3-(benzyl)imidazol-2-ylidene] and a non-functionalized [1,3-di-i-propyl-benzimidazol-2-ylidene], are reported. Specifically, the gold complexes, [1-(2-hydroxy-cyclohexyl)-3-(acetophenone)imidazol-2-ylidene]AuCl (1c), [1-(2-hydroxy-cyclohexyl)-3-(benzyl)imidazol-2-ylidene]AuCl (2c), and [1,3-di-i-propyl-benzimidazol-2-ylidene]AuCl (3b), were prepared from the respective silver complexes 1b, 2b, and 3a by treatment with (SMe₂)AuCl in good yields following the commonly used silver carbene transfer route. The silver complexes 1b, 2b, and 3a were synthesized from the respective imidazolium halide salts by the reactions with Ag₂O. The N-heterocyclic carbene precursors, 1-(2-hydroxy-cyclohexyl)-3-(acetophenone)imidazolium chloride (1a) and 1-(2-hydroxy-cyclohexyl)-3-(benzyl)imidazolium chloride (2a), were synthesized by the direct reactions of cyclohexene oxide and imidazole with chloroacetophenone and benzyl chloride respectively. The gold (1c, 2c, and 3b) and the silver (3a) complexes along with a new O-functionalized imidazolium chloride salt (1a) have been structurally characterized by X-ray diffraction. The structural studies revealed that geometries around the metal centers were almost linear in these gold and silver complexes. The gold (1c, 2c, and 3b) complexes efficiently catalyze ring-opening polymerization (ROP) of l-lactide under solvent-free melt conditions producing polylactide polymer of moderate to low molecular weights with narrow molecular weight distributions.     

Salen-ligands based on a planar-chiral hydroxyferrocene moiety: Synthesis, coordination chemistry and use in asymmetric silylcyanation

Condensation of the O-protected hydroxyferrocene carbaldehyde (S_p)-1 with suitable diamines, followed by liberation of the hydroxyferrocene moiety leads to a new type of ferrocene-based salen ligands (3). While the use of ethylenediamine in the condensation reaction yields the planar-chiral ethylene-bridged ligand [(S_p,S_p)-3a], reaction with the enantiomers of trans-1,2-cyclohexylendiamine gives rise to the corresponding diastereomeric cyclohexylene-bridged systems [(S,S,S_p,S_p)-3b and (R,R,S_p,S_p)-3c], which feature a combination of a planar-chiral ferrocene unit with a centrochiral diamine backbone. Starting with the ferrocene-aldehyde derivative (R_p)-1, the enantiomeric ligand series (3d/e/f) is accessible via the same synthetic route.The (S_p)-series of these newly developed N₂O₂-type ligands was used for the construction of the corresponding mononuclear bis(isopropoxy)titanium (4a/b/c), methylaluminum (5a/b/c) and chloroaluminum-complexes (6a/b/c), which were isolated in good yields and identified by X-ray diffraction in several cases. The aluminum complexes (5/6) were successfully used in the Lewis-acid catalyzed addition of trimethylsilylcyanide to benzaldehyde, yielding the corresponding cyanohydrins in 45-62% enantiomeric excess.     

Stabilization of (N-methyleneamino)imidoylketenes: synthesis of dipyrazolo[1,2-a;1′,2′-d][1,2,4,5]tetrazines

Thermolysis of substituted methyl 1-methyleneamino-4,5-dioxo-4,5-dihydro-1H-pyrrole-2-carboxylates 2a,b led to substituted dimethyl 3,9-dioxo-1,5,7,11-tetrahydro-1H,7H-dipyrazolo[1,2-a;1′,2′-d][1,2,4,5]tetrazine-1,7-dicarboxylates 4a,b and methyl 2,5-dihydro-5-oxo-1H-pyrazole-3-carboxylates 5a,b as minor products. The structure of compound 4a was determined by X-ray crystallography. The proposed mechanism of this conversion includes generation of (N-methyleneamino)imidoylketenes 6a,b and its intramolecular transformation to azomethine imines—5-oxo-2,5-dihydropyrazole-1-methylium-2-ides 7a,b, which undergo dimerization in head-to-tail manner yielding products 4a,b and partially hydrolyse to compounds 5a,b.     

On the microstructure and symmetry of apparently hexagonal BaAl2O4

The P6₃ (a=2a_p, b=2b_p, c=c_p) crystal structure reported for BaAl₂O₄ at room temperature has been carefully re-investigated by a combined transmission electron microscopy and neutron powder diffraction study. It is shown that the poor fit of this P6₃ (a=2a_p, b=2b_p, c=c_p) structure model for BaAl₂O₄ to neutron powder diffraction data is primarily due to the failure to take into account coherent scattering between different domains related by enantiomorphic twinning of the P6₃22 parent sub-structure. Fast Fourier transformation of [0 0 1] lattice images from small localized real space regions (∼10 nm in diameter) are used to show that the P6₃ (a=2a_p, b=2b_p, c=c_p) crystal structure reported for BaAl₂O₄ is not correct on the local scale. The correct local symmetry of the very small nano-domains is most likely orthorhombic or monoclinic.     

One-electron oxidation of alkyl alkoxybenzenes by ω-fluorosulfonylperfluorodiacyl peroxide

The oxidation of p-methylanisole 3a, dialkoxybenzenes 3b, 3c and alkyl dialkoxybenzenes 3d-h by perfluorodi[1-(2-fluorosulfonyl) ethoxy]propionyl peroxide 1 afforded main products 4-ω-fluorosulfonylperfluoroalkyl-4-alkoxy-2,5-cyclohexa-dienones and minor ring ω-fluorosulfonylperfluoroalkylation products. The electron transfer mechanism of the reactions is also proved by ESR detection of the radical cations of the donor molecules.     

Facile synthesis of 4-phenylquinolin-2(1H)-one derivatives from N-acyl-o-aminobenzophenones

An efficient synthesis of 4-phenylquinolin-2(1H)-one derivatives has been achieved in a one-pot reaction from N-acyl-o-aminobenzophenones 1a-c (a: acyl=acetyl; b: acyl=propanoyl; c: acyl=heptanoyl) using NaH as a base. Treatment of 1 with NaH provided the quinolones 2a-c with 62-83% yields, whereas the reaction in the presence of alkyl iodide (alkyl=methyl, ethyl, n-octyl) gave the corresponding N-alkylated quinolones 3a-g in 75-95% yields. The alkylation reaction of 4-phenylquinolin-2(1H)-one 2a with alkyl halide gave a mixture of N-alkylated and O-alkylated products. Comparison of IR and NMR data of the N-alkylated and O-alkylated compounds with those of 2a-c indicated that 2a-c exist as the lactam form.     

Half-sandwich η-arene–ruthenium(II) complexes bearing 1-alkyl(benzyl)-imidazo[4,5-f][1,10]-phenanthroline (IP) derivatives: the effect of alkyl chain length of ligands to catalytic activity

The reaction of bromoalkanes (R–Br; (3), R=C_nH_2n+1, n=4 (a), 8 (b), 12 (c),18 (d)) and bromobenzyl derivatives (R′–Br; (4), R′=CH₂C₆H₂(CH₃)₃-2,4,6 (a); CH₂C₆H(CH₃)₄-2,3,5,6 (b); CH₂C₆(CH₃)₅ (c)) with 1H-imidazo[4,5-f][1,10]-phenanthroline (IP)(L₂) gave the corresponding 1-R-imidazo[4,5-f][1,10]-phenanthroline (IPR)(L_3a–d) and 1-R′-imidazo[4,5-f][1,10]-phenanthroline(IPR')(L_4a–c) ligands, respectively. Treatment of L_3a–d and L_4a–d with [Ru(p-cymene)Cl₂]₂ led to the formation of [Ru(p-cymene)(IPR)Cl]Cl (RuL_3a–d) and [Ru(p-cymene)(IPR′)Cl]Cl (RuL_4a–c). New ruthenium(II) complexes RuL_3a–d and RuL_4a–c were characterized by elemental analysis, FTIR, UV–visible and NMR spectroscopy. In order to understand effects of these changes on the N-substituent of imidazol on IP and how they translate to catalytic activity, these new RuL₂, RuL_3a–d and RuL_4a–c were applied in the transfer hydrogenation of ketones by 2-propanol in presence of potassium hydroxide. The activities of the catalysts were monitored by NMR and GC analysis.     

Ni(II) and Cu(II) complexes of phenoxy-ketimine ligands: Synthesis,structures and their utility in bulk ring-opening polymerization (ROP) of l-lactide

Synthetic, structural and catalysis studies of Ni(II) and Cu(II) complexes of a series of phenoxy-ketimine ligands with controlled variations of sterics, namely 2-[1-(2,6-diethylphenylimino)ethyl]phenol (1a), 2-[1-(2,6-dimethylphenylimino)ethyl]phenol (1b) and 2-[1-(2-methylphenylimino)ethyl]phenol (1c), are reported. Specifically, the ligands 1a, 1b and 1c were synthesized by the TiCl₄ mediated condensation reactions of the respective anilines with o-hydroxyacetophenone in 21–23% yield. The nickel complexes, {2-[1-(2,6-diethylphenylimino)ethyl]phenoxy}₂Ni(II) (2a) and {2-[1-(2,6-dimethylphenylimino)ethyl]phenoxy}₂Ni(II) (2b), were synthesized by the reaction of the respective ligands 1a and 1b with Ni(OAc)₂ · 4H₂O in the presence of NEt₃ as a base in 71–75% yield. The copper complexes, {2-[1-(2,6-diethylphenylimino)ethyl]phenoxy}₂Cu(II) (3a), {2-[1-(2,6-dimethylphenylimino)ethyl]phenoxy}₂Cu(II) (3b) and {2-[1-(2-methylphenylimino)ethyl]phenoxy}₂Cu(II) (3c) were synthesized analogously by the reactions of the ligands 1a, 1b and 1c with Cu(OAc)₂ · H₂O in 70–87% yield. The molecular structures of the nickel and copper complexes 2a, 2b, 3a, 3b and 3c have been determined by X-ray diffraction studies. Structural comparisons revealed that the nickel centers in 2a and 2b are in square planar geometries while the geometry around the copper varied from being square planar in 3a and 3c to distorted square planar in 3b. The catalysis studies revealed that while the copper complexes 3a, 3b and 3c efficiently catalyze ring-opening polymerization (ROP) of l-lactide at elevated temperatures under solvent-free melt conditions, producing polylactide polymers of moderate molecular weights with narrow molecular weight distributions, the nickel counterparts 2a and 2b failed to yield the polylactide polymer.     

Solvent-free reactions of fullerenes and N-alkylglycines with and without aldehydes under high-speed vibration milling

The solvent-free reactions of fullerenes and N-alkylglycines with and without aldehydes (RCHO) 2a-e under high-speed vibration milling (HSVM) conditions have been investigated. Fulleropyrrolidines 4a-e (C₆₀(CH₂N(CH₃)CHR), R=H (4a), C₆H₅ (4b), p-NO₂-C₆H₄ (4c), p-CH₃O-C₆H₄ (4d), p-(CH₃)₂N-C₆H₄ (4e)) were obtained in moderate yields from reactions of C₆₀ with aldehydes 2a-e and N-methylglycine (Prato reaction). In all these solvent-free reactions, 4a was found to be formed besides 4b-e, indicating that fullerenes can react with N-substituted glycines in the absence of aldehyde to give fulleropyrrolidines. For this novel reaction, a possible reaction mechanism involving an electron transfer process has been proposed. Intrigued by this observation, the dependence of the yield on the reagent ratio for the reaction of C₆₀ with paraformaldehyde and/or N-methylglycine was examined to search the optimal conditions. The reaction of C₇₀ with paraformaldehyde and/or N-methylglycine under HSVM conditions was also studied and was found to give the positional isomers of [70]fulleropyrrolidines.     

Synthesis of eight-membered iminocyclitols from d-glucose

The Baylis-Hillman reaction of 3-O-benzyl-α-d-xylo-pentodialdo-1,4-furanose 2 afforded a diastereomeric mixture of l-ido- and d-gluco-configurated α-methylene-β-hydroxy esters 3a and 3b, respectively, in 1:1 ratio. Conjugate addition of benzyl amine on 3a gave adduct 4a as a major product while, addition of benzyl amine to 3b gave only one diastereomer 4b. Reduction of ester functionality in 4a/4b, opening of 1,2-acetonide functionality followed by reductive amino-cyclization under hydrogenation condition afforded azocanes 1c/1d in good yield.     

Synthesis and reactivity of para-substituted benzoylmethyltellurium(II and IV) compounds: observation of intermolecular C-H-O hydrogen bonding in the crystal structure of (p-MeOC6H4COCH2)2TeBr2

Bis(p-substituted benzoylmethyl)tellurium dibromides, (p-YC₆H₄COCH₂)₂TeBr₂, (Y=H (1a), Me (1b), MeO (1c)) can be prepared either by direct insertion of elemental Te across C_Rf-Br bonds (where C_Rf refers to α-carbon of a functionalized organic moiety) or by the oxidative addition of bromine to (p-YC₆H₄COCH₂)₂Te (Y=H (2a), Me (2b), MeO (2c)). Bis(p-substituted benzoylmethyl)tellurium dichlorides, (p-YC₆H₄COCH₂)₂TeCl₂ (Y=H (3a), Me (3b), MeO (3c)), are prepared by the reaction of the bis(p-substituted benzoylmethyl)tellurides 2a-c with SO₂Cl₂, whereas the corresponding diiodides (p-YC₆H₄COCH₂)₂TeI₂ (Y=H (4a), Me (4b), MeO (4c)) can be obtained by the metathetical reaction of 1a-c with KI, or alternatively, by the oxidative addition of iodine to 2a-c. The reaction of 2a-c with allyl bromide affords the diorganotellurium dibromides 1a-c, rather than the expected triorganotelluronium bromides. Compounds 1-4 were characterized by elemental analyses, IR spectroscopy, ¹H, ¹³C and ¹²⁵Te NMR spectroscopy (solution and solid-state) and in case of 1c also by X-ray crystallography. (p-MeOC₆H₄COCH₂)₂TeBr₂ (1c) provides, a rare example, among organotellurium compounds, of a supramolecular architecture, where C-H-O hydrogen bonds appear to be the non-covalent intermolecular associative force that dominates the crystal packing.