Cu(II) and Pd(II) complexes of N-(2-hydroxybenzyl)aminopyridines

N-(2-Hydroxybenzyl)aminopyridines (Lⁱ) react with Cu(II) and Pd(II) ions to form complexes in the compositions Cu(Lⁱ)₂(CH₃COO)₂ · nH₂O (n = 0, 2, 4), Pd(Lⁱ)₂Cl₂ · nC₂H₅OH (n = 0, 2) and Pd(L²)₂Cl₂ · 2H₂O. In the complexes, the ligands are neutral and monodentate which coordinate through pyridinic nitrogen. Crystal data of the complexes obtained from 2-amino pyridine derivative have pointed such a coordinating route and comparison of the spectral data suggests the validity of similar complexation modes of other analog ligands. Cu(II) complex of N-(2-hydroxybenzyl)-2-aminopyridine (L¹), [Cu(L¹)₂(CH₃COO)₂] has slightly distorted square planar cis-mononuclear structure which is built by two oxygen atoms of two monodentate carboxylic groups disposed in cis-position and two nitrogen atoms of two pyridine rings. The remaining two oxygen atoms of two carboxylic groups form two Cu and H bridges containing cycles which joint at same four coordinated copper(II) ion. IR and electronic spectral data and the magnetic moments as well as the thermogravimetric analyses also specify on mononuclear octahedric structure of complexes [Cu(L²)₂(CH₃COO)₂ · 2H₂O] and [Cu(L³)₂(CH₃COO)₂ · 4H₂O] where L² and L³ are N-(2-hydroxybenzyl)-2- or 3-aminopyridines, respectively.     

Cl/Cl isotope effects in Rh NMR of [RhCln(H2O)6−n] complex anions in hydrochloric acid solution as a unique ‘NMR finger-print’ for unambiguous speciation

A detailed analysis of the ³⁵Cl/³⁷Cl isotope effects observed in the 19.11 MHz ¹⁰³Rh NMR resonances of [RhCl_n(H₂O)_6−n]³⁻ⁿ complexes (n = 3–6) in acidic solution at 292.1 K, shows that the ‘fine structure’ of each ¹⁰³Rh resonance can be understood in terms of the unique isotopologue and in certain instances the isotopomer distribution in each complex. These ³⁵Cl/³⁷Cl isotope effects in the ¹⁰³Rh NMR resonance of the [Rh^35/37Cl₆]³⁻ species manifest only as a result of the statistically expected ³⁵Cl/³⁷Cl isotopologues, whereas for the aquated species such as for example [Rh^35/37Cl₅(H₂O)]²⁻, cis-[Rh^35/37Cl₄(H₂O)₂]⁻ as well as the mer-[Rh^35/37Cl₃(H₂O)₃] complexes, additional fine-structure due to the various possible isotopomers within each class of isotopologues, is visible. Of interest is the possibility of the direct identification of stereoisomers cis-[RhCl₄(H₂O)₂]⁻, trans-[RhCl₄(H₂O)₂]⁻, fac-[RhCl₃(H₂O)₃] and mer-[RhCl₃(H₂O)₃] based on the ¹⁰³Rh NMR line shape, other than on the basis of their very similar δ(¹⁰³Rh) chemical shift. The ¹⁰³Rh NMR resonance structure thus serves as a novel and unique ‘NMR-fingerprint’ leading to the unambiguous assignment of [RhCl_n(H₂O)_6−n]³⁻ⁿ complexes (n = 3–6), without reliance on accurate δ(¹⁰³Rh) chemical shifts.     

Optically active rhodium complexes with indenyl-linked phosphane ligands

The optically active indenyl-linked phosphane ligands (S)-[2-(3H-inden-1-yl)-1-phenylethyl]diphenylphosphane (L₁) and (S)-[2-(4,7-dimethyl-3H-inden-1-yl)-1-phenyl-ethyl]diphenylphosphane (L₂) were synthesized in three steps from (R)-1-phenylethane-1,2-diol in excellent yields. Their lithium salts reacted with [Rh(μ-Cl)(η²-CH₂CH₂)₂]₂ at −78 °C in THF affording the planar chiral complexes (S,R_pl + S_pl)-[Rh(η⁵-indenyl-CH₂CH(Ph)PPh₂-kP)(η²-CH₂CH₂)] and (S,R_pl + S_pl)-[Rh(η⁵-4,7-dimethylindenyl-CH₂CH(Ph)PPh₂-kP)(η²-CH₂CH₂)] as 61:39 and 15:85 mixtures of diastereomers. The complexes were isolated in optically pure form by column chromatography. The stereochemical configuration of one of the diastereomers was determined by X-ray crystallography. The complexation of L₂ was studied in different solvents and with several Rh precursors and diastereomeric excesses up to 76% were achieved. The ability of the chiral ligands to control the stereochemistry at the metal center was tested by oxidative addition of methyl iodide. Diastereomeric excesses greater than 98% were observed.     

Mechanistic studies on the Pd–Cl cleavage of dichloro-[1-alkyl-2-(naphthylazo)imidazole]palladium(II) complexes by 8-quinolinol

8-Quinolinol (HQ) reacts with [Pd(α-/β-NaiR)Cl₂] [α-/β-NaiR = 1-alkyl-2-(naphthyl-α-/β-azo)imidazole] in acetonitrile (MeCN) solution to give [Pd(α-/β-NaiR)(Q)](ClO₄). The products are characterized by spectroscopic techniques (FT-IR, UV–Vis, NMR). The reaction kinetics show a first order dependence of rate on each of the concentration of the metal complex and HQ. Addition of LiCl to the reaction retarded the rate of reaction and has proved the cleavage of the Pd–Cl bond as the rate-determining step. Thermodynamic parameters (Δ^‡H^° and Δ^‡S^°) are determined from variable temperature kinetic studies. The magnitude of the second order rate constant, k₂, increases as in the order: Pd(NaiEt)Cl₂ < Pd(NaiMe)Cl₂ < Pd(NaiBz)Cl₂ as well as Pd(β-NaiR)Cl₂ < Pd(α-NaiR)Cl₂.     

Density Functional Method Study on the Cooperativity of Intermolecular H-bonding and π-π+ Stacking Interactions in Thymine-[Cnmim]Br (n = 2, 4, 6, 8, 10) Microhydrates

The exploration of the ionic liquids’ mechanism of action on nucleobase’s structure and properties is still limited. In this work, the binding model of the 1-alkyl-3-methylimidazolium bromide ([C_nmim]Br, n = 2, 4, 6, 8, 10) ionic liquids to the thymine (T) was studied in a water environment (PCM) and a microhydrated surroundings (PCM + wH₂O). Geometries of the mono-, di-, tri-, and tetra-ionic thymine (T-wH₂O-y[C_nmim]⁺-xBr⁻, w = 5~1 and x + y = 0~4) complexes were optimized at the M06-2X/6-311++G(2d, p) level. The IR and UV-Vis spectra, QTAIM, and NBO analysis for the most stable T-4H₂O-Br⁻-1, T-3H₂O-[C_nmim]⁺-Br⁻-1, T-2H₂O-[C_nmim]⁺-2Br⁻-1, and T-1H₂O-2[C_nmim]⁺-2Br⁻-1 hydrates were presented in great detail. The results show that the order of the arrangement stability of thymine with the cations (T-[C_nmim]⁺) by PCM is stacking > perpendicular > coplanar, and with the anion (T-Br⁻) is front > top. The stability order for the different microhydrates is following T-5H₂O-1 < T-4H₂O-Br⁻-1 < T-3H₂O-[C_nmim]⁺-Br⁻-1 < T-2H₂O-[C_nmim]⁺-2Br⁻-1 < T-1H₂O-2[C_nmim]⁺-2Br⁻-1. A good linear relationship between binding E_B values and the increasing number (x + y) of ions has been found, which indicates that the cooperativity of interactions for the H-bonding and π-π⁺ stacking is varying incrementally in the growing ionic clusters. The stacking model between thymine and [C_nmim]⁺ cations is accompanied by weaker hydrogen bonds which are always much less favorable than those in T-xBr⁻ complexes; the same trend holds when the clusters in size grow and the length of alkyl chains in the imidazolium cations increase. QTAIM and NBO analytical methods support the existence of mutually reinforcing hydrogen bonds and π-π cooperativity in the systems.     

Boron-dipyrromethene based specific chemodosimeter for fluoride ion

3,5-Bis(trimethylsilylethynyl)-4,4-difluoro-8-(4-tolyl)-4-bora-3a,4a-diaza-s-indacene [BODIPY(CCTMS)₂] has been synthesized by coupling of 3,5-dibromo-4,4-difluoro-8-(4-tolyl)-4-bora-3a,4a-diaza-s-indacene with trimethylsilylacetylene under pd(0) coupling conditions. The BODIPY(CCTMS)₂ was used as a selective colourimetric and fluorescent chemodosimeter for fluoride ion, following the F⁻ ion induced cleavage of trimethylsilyl group, the protecting group of ethyne functionality by monitoring the changes in UV-vis and fluorescence properties. The dosimeter BODIPY(CCTMS)₂ display clear changes in colour, absorption and emission bands selectively for F⁻ ion over other anions such as Cl⁻, Br⁻, I⁻, ClO₄⁻ and HPO₄²⁻.     

Diphenyltin(IV) complexes of the 5-[(E)-2-(aryl)-1-diazenyl]quinolin-8-olates: Synthesis and multinuclear NMR, Sn Mössbauer, electrospray ionization MS, X-ray characterization and assessment of in vitro cytotoxicity

A series of cis-bis{5-[(E)-2-(aryl)-1-diazenyl]quinolinolato}diphenyltin(IV) complexes have been synthesized and characterized by ¹H, ¹³C, ¹¹⁹Sn NMR, ESI-MS, IR and ^119mSn Mössbauer spectroscopic techniques in combination with elemental analysis. The structures of a ligand L⁶H (i.e., 5-[(E)-2-(4-ethoxyphenyl)-1-diazenyl]quinolin-8-ol) and three diphenyltin(IV) complexes, viz., Ph₂Sn(L¹)₂ · (CH₃)₂CO (1), Ph₂Sn(L⁴)₂ (4) and Ph₂Sn(L⁵)₂ (5) (L = 5-[(E)-2-(aryl)-1-diazenyl]quinolin-8-ol: aryl = phenyl - (L¹H); 4′-methylphenyl - (L⁴H) and 4′-bromophenyl - (L⁵H)) were determined by single crystal X-ray diffraction. In general, the complexes were found to adopt a distorted cis-octahedral arrangement around the tin atom. These complexes retain their solid-state structure in non-coordinating solvent as evidenced by ¹¹⁹Sn NMR spectroscopic results. The in vitro cytotoxicity of 1 is reported and compared with Ph₂Sn(Ox)₂ (Ox = deprotonated quinolin-8-ol) against seven well characterized human tumor cell lines.     

Separation and quantification of [RhCln(H2O)6−n] (n = 0-6) complexes, including stereoisomers, by means of ion-pair HPLC-ICP-MS

A hyphenated ion-pair (tetrabutylammonium chloride—TBACl) reversed phase (C₁₈) HPLC-ICP-MS method (High Performance Liquid Chromatography Inductively Coupled Plasma Mass Spectroscopy) for anionic Rh(III) aqua chlorido-complexes present in an HCl matrix has been developed. Under optimum chromatographic conditions it was possible to separate and quantify cationic Rh(III) complexes (eluted as a single band), [RhCl₃(H₂O)₃], cis-[RhCl₄(H₂O)₂]⁻, trans-[RhCl₄(H₂O)₂]⁻ and [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 5, 6) species. The [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 5, 6) complex anions eluted as a single band due to the relatively fast aquation of [RhCl₆]³⁻ in a 0.1 mol L⁻¹ TBACl ionic strength mobile phase matrix. Moreover, the calculated t_1/2 of 1.3 min for [RhCl₆]³⁻ aquation at 0.1 mol kg⁻¹ HCl ionic strength is significantly lower than the reported t_1/2 of 6.3 min at 4.0 mol kg⁻¹ HClO₄ ionic strength. Ionic strength or the activity of water in this context is a key parameter that determines whether [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 5, 6) species can be chromatographically separated. In addition, aquation/anation rate constants were determined for [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 3-6) complexes at low ionic strength (0.1 mol kg⁻¹ HCl) by means of spectrophotometry and independently with the developed ion-pair HPLC-ICP-MS technique for species assignment validation. The Rh(III) samples that was equilibrated in differing HCl concentrations for 2.8 years at 298 K was analyzed with the ion-pair HPLC method. This analysis yielded a partial Rh(III) aqua chlorido-complex species distribution diagram as a function of HCl concentration. For the first time the distribution of the cis- and trans-[RhCl₄(H₂O)₂]⁻ stereoisomers have been obtained. Furthermore, it was found that relatively large amounts of ‘highly’ aquated [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 0-4) species persist in up to 2.8 mol L⁻¹ HCl and in 1.0 mol L⁻¹ HCl the abundance of the [RhCl₅(H₂O)]²⁻ species is only 8-10% of the total, far from the 70-80% as previously proposed. A 95% abundance of the [RhCl₆]³⁻ complex anion occurs only when the HCl concentration is above 6 mol L⁻¹. The detection limit for a Rh(III) species eluted from the column is below 0.147 mg L⁻¹.     

Synthesis and structural characterization of a dichloro zinc complex of N,N′-bis-(2,6-dichloro-benzyl)-(R,R)-1,2-diaminocyclohexane: Application to ring opening polymerization of rac-lactide

A novel dichloro zinc complex (L¹)ZnCl₂, where L¹ is N,N′-bis-(2,6-dichloro-benzyl)-(R,R)-1,2-diaminocyclohexane, has been synthesized and characterized. The dimethyl derivatives, generated in situ from the well characterized dichloro zinc complexes (L¹)ZnCl₂ and (L²)ZnCl₂, where L² is N,N′-bis-(benzyl)-(R,R)-1,2-diaminocyclohexane, were employed as initiators for the ring opening polymerization (ROP) of rac-lactide (rac-LA). The complexes were found to be highly efficient initiators yielding the polylactide (PLA) with a narrow molecular weight distribution. The catalytic activity and heterotactic selectivity of the Zn(II) complexes were affected by the substituents on the phenyl groups of benzyl moieties in (R,R)-1,2-diaminocyclohexane. The dimethyl derivative of (L²)ZnCl₂ produced highly stereocontrolled PLA with P_r = 0.75 at −25 °C.     

A study of β-hydride abstraction from alkanediyl homobimetallic complexes [{Cp(CO)2Fe}2{μ-(CnH2n)}] (n = 4-10, Cp = η-C5H5)

The alkyl-bridged iron(II) complexes [{Cp(CO)₂Fe}₂{μ-(C_nH_2n)}] (n = 6-10, Cp = η⁵-C₅H₅) undergo both single and double hydride abstraction when reacted with one equivalent of Ph₃CPF₆ to give both the monocationic complexes, [{Cp(CO)₂Fe}₂{μ-(C_nH_2n−1)}]PF₆, and the dicationic complexes, [{Cp(CO)₂Fe}₂{μ-(C_nH_2n−2)}](PF₆)₂. The ratios of monocationic to dicationic complexes decrease with the increase in the value of n. The complexes where n = 4 and 5 undergo only single hydride abstraction under similar conditions. When reacted with two equivalents of Ph₃CPF₆, the complexes where n = 6-10 undergo double hydride abstraction to give dicationic complexes only. In contrast, the complex where n = 5 gives equal amounts of the monocationic and the dicationic complexes, while the complex where n = 4 only gives the monocationic complex. ¹H and ¹³C NMR data show that in the monocationic complexes one metal is σ-bonded to the carbenium ion moiety while the other is bonded in a η²-fashion forming a chiral metallacylopropane type structure. In the dicationic complexes both metals are bonded in the η²-fashion. The monocationic complexes where n = 4-6, react with methanol to give η¹-alkenyl complexes[Cp(CO)₂Fe(CH₂)_nCHCH₂] (n = 2-4) as the major products and σ-bonded ether products [{Cp(CO)₂Fe}₂{μ-(CH₂)_nCH(OCH₃)CH₂}] as the minor products. The complex where n = 8 reacted with iso-propanol to give the η¹-alkenyl complex [Cp(CO)₂Fe(CH₂)₆CHCH₂]. The dicationic complexes where n = 5, 8 and 9 were reacted with NaI to give the respective α, ω-dienes and [Cp(CO)₂FeI].     

Preparation and electrochemical behavior of a macrocyclic heterodinuclear FeIIICoIII complex

A new macrocyclic heterodinuclear Fe^IIICo^III complex, prepared by the condensation of 2,6-diformylpyridine N-oxide with 1,3-diaminopropane in the presence of FeCl₂.4H₂O and CoCl₂.6H₂O, and formulated as FeCoLCl₆.C₂H₅OH.8H₂O, was characterized by elemental analyses, IR and Mössbauer spectra and investigated electrochemically on an ultramicrodisk platinum electrode. The results show that the electrode reaction can be thought as a nearly reversible transfer process. The diffusion coefficient is 1.93×10^-6 m² s^-1 and E^o ̄ is −0.229V (versus s.c.e) and α=0.877. The average electron transfer rate constant k^o′ is 3.21×10^-3 cm s^-1.     

Tetrachloroferrate (III) Salts of BDH-TTP [2,5-Bis(1,3-dithiolan-2-ylidene)-1,3,4,6-tetrathiapentalene] and BDA-TTP [2,5-Bis(1,3-dithian-2-ylidene)-1,3,4,6-tetrathiapentalene]: Crystal Structures and Physical Properties

Three FeCl₄ salts based on non-tetrathiafulvalene (TTF) donors, 2,5-bis(1,3-dithiolan-2-ylidene)-1,3,4,6-tetrathiapentalene (BDH-TTP) and 2,5-bis(1,3-dithian-2-ylidene)-1,3,4,6-tetrathiapentalene (BDA-TTP), have been prepared and characterized as κ-(BDH-TTP)₂FeCl₄, β-(BDA-TTP)₂FeCl₄, and (BDA-TTP)₃FeCl₄ · PhCl. The κ-(BDH-TTP)₂FeCl₄ salt, with a room-temperature conductivity (σ_rt) of 39 S cm⁻¹, is metallic down to 1.5 K, and its magnetic susceptibility obeys the Curie-Weiss law with a Curie constant (C) of 4.25 emu K mol⁻¹ and a Weiss constant (θ) of 0.041 K. β-(BDA-TTP)₂FeCl₄ exhibits metallic behavior (σ_rt=9.4 S cm⁻¹) with a sharp metal-to-insulator (MI) transition (T_MI=113 K) and antiferromagnetic ordering with the Néel temperature of near 8.5 K, whereas the solvated (BDA-TTP)₃FeCl₄ · PhCl salt is a semiconductor with a thermal activation energy of 0.11 eV (σ_rt=2.0× 10⁻² S cm⁻¹) and exhibits Curie-Weiss behavior (C=4.42 emu K mol⁻¹, θ=−0.35 K).     

Conformational fluxionality in a palladium(II) complex of flexible click chelator 4-phenyl-1-(2-picolyl)-1,2,3-triazole: A dynamic NMR and DFT study

An experimental and theoretical DFT study was carried out on the solution behavior in [D₇]DMF for bis-chelate complex [Pd(L)₂](BF₄)₂·2CH₃CN (L = 4-phenyl-1-(2-picolyl)-1,2,3-triazole). In structure of [Pd(L)₂]²⁺, the central square-planar palladium(II) cation is trans-chelated by two L substrates, each through the pyridine and the triazole N2 nitrogen atoms, forming two six-membered metallacycles. These can adopt boat-like conformations anti-trans-[Pd(L)₂]²⁺ and syn-trans-[Pd(L)₂]²⁺ in which the picolyl methylene carbons are anti or syn, respectively, relative to the palladium coordination plane. In solution, the boat-to-boat inversion at both metallacycles takes place. The conformers are in a dynamic equilibrium, which was monitored by variable-temperature (VT) ¹H NMR spectroscopy in the temperature range of 223-353 K. The equilibrium lies on the side of the anti-trans-[Pd(L)₂]²⁺ conformer and the corresponding reaction enthalpy and entropy is estimated to be 0.6 ± 0.5 kcal mol⁻¹ and 0.8 ± 1 cal mol⁻¹ K⁻¹, respectively. From the full-line-shape analysis of resonances in the VT ¹H NMR spectra, the activation enthalpy and activation entropy was determined to be 13.0 ± 0.4 kcal mol⁻¹ and 2.7 ± 1.6 cal mol⁻¹ K⁻¹, respectively. The activation entropy close to zero suggests a nondissociative mechanism for the isomerisation. DFT investigation revealed that the isomerisation proceeds through a one step mechanism with a barrier of 11.40 kcal mol⁻¹. The structures of the syn and anti conformers as well as that of the transition state were characterized. Energy decomposition analysis was carried out in order to explore the origins of the stability difference between the syn and anti isomers.     

Preparation, crystal structure and thermal expansion of a new bismuth barium borate, BaBi2B4O10

Single crystals of a new compound, BaBi₂B₄O₁₀ were grown by cooling a melt with the stoichiometric composition. The crystal structure of the compound has been solved by direct methods and refined to R₁=0.049 (wR=0.113) on the basis of 1813 unique observed reflections (|F_o|>4σ|F_o|). It is monoclinic, space group P2₁/c, a=10.150(2), b=6. 362(1), c=12.485(2) Å, β=102.87(1)^o, V=786.0(2) Å³, Z=4. The structure is based upon anionic thick layers that are parallel to (001). The layers can be described as built from alternating novel borate [B₄O₁₀]⁸⁻_∞ chains and bismuthate [Bi₂O₅]⁴⁻_∞ chains extended along b-axis. The borate chains are composed of [B₃O₈]⁷⁻ triborate groups of three tetrahedra and single triangles with a [BO₂]⁻ radical. The borate chains are interleaved along the c-axis with rows of the Ba²⁺ cations so that the Ba atoms are located within the layers. The layers are connected by two nonequivalent Ba-O bonds as well as by two equivalent Bi-O bonds with bond valences in the range of 0.2-0.3 v.u.Thermal expansion of BaBi₂B₄O₁₀ studied by high-temperature X-ray powder diffraction in the temperature range of 20-700 °C (temperature step 30-35 °C) is highly anisotropic. While the b and c unit-cell parameters increase almost linearly on heating, temperature dependencies of a parameter and β monoclinic angle show nonlinear behavior. As a result, on heating orientation of thermal expansion tensor changes, and bulk thermal expansion increases from 20×10⁻⁶ °C⁻¹ at the first heating stage up to 57×10⁻⁶ °C⁻¹ at 700 °C that can be attributed to the increase of thermal mobility of heavy Bi³⁺ and Ba²⁺ cations.     

Crystal structure,electrochemical and photochemical studies of the trans-[Fe(cyclam)(NO)Cl]Cl2 complex (cyclam = 1,4,8,11-tetraazacyclotetradecane)

The trans-[Fe(cyclam)(NO)Cl]Cl₂ complex was synthesized by the reaction of cis-[Fe(cyclam)Cl₂]Cl with NO gas. The X-ray structure of the complex showed that the [Fe–NO] moiety is linear, consistent with the NO⁺ character of the nitric oxide ligand. This suggestion was reinforced by the IR data, which showed the νNO at 1888 cm⁻¹. The cyclic voltammogram of the trans-[Fe(cyclam)(NO)Cl]²⁺ complex presented three electrochemical processes at −0.70, 0.08 and 0.40 V versus Ag/AgCl. The first and last redox processes are centered at the NO ligand, whereas the second is characteristic of the generated aqua species, trans-[Fe(cyclam)Cl(H₂O)]²⁺. Upon irradiation at 330 nm, pH 3.4, the title complex releases the NO moiety with the concomitant generation of the trans-[Fe(cyclam)(H₂O)Cl]⁺ complex as suggested by electronic and IR spectroscopy as well as by cyclic voltammetry technique.     

N-arylammonio- and N-pyridinium-substituted derivatives of dodecahydro-closo-dodecaborate(2-)

We report two methods for preparing N-arylammonio, N-pyridyl and N-arylamino dodecaborates: heating of the tetrabutylammonium salt of dodecahydro-closo-dodecaborate(2-) with aryl and pyridyl amines, or nucleophilic attack of [closo-B₁₂H₁₁NH₂]²⁻ on a strongly deactivated aromatic system. With aryl amines we obtained [1-closo-B₁₂H₁₁N(R¹)₂C₆H₅]⁻ (R¹ = H, CH₃). With 4-(dimethylamino)pyridine, [1-closo-(B₁₂H₁₁NC₅H₄)-4-N(CH₃)₂]⁻, with a bond between the boron and the pyridinium nitrogen, was obtained. A presumable mechanism for this kind of reactions is reported. By nucleophilic substitution, two products, [1-closo-(B₁₂H₁₁NHC₆H₃)-3,4-(CN)₂]²⁻ and [1-closo-(B₁₂H₁₁NHC₆H₂)-2-(NO₂)-4,5-(CN)₂]²⁻, were formed with 4-nitrophthalonitrile and 1-chloro-2,4-dinitrobenzene gave [1-closo-(B₁₂H₁₁NHC₆H₃)-2,4-(NO₂)₂]²⁻. For [1-closo-B₁₂H₁₁N(CH₃)₂C₆H₅]⁻ and [1-closo-(B₁₂H₁₁NHC₆H₃)-2,4-(NO₂)₂]²⁻ single crystal X-ray structures were obtained.     

Novel platinum pyridinehydroxamic acid complexes: Synthesis,characterisation, X-ray crystallographic study and nitric oxide related properties

Herein, we describe the synthesis and characterisation of a novel class of Pt^II and Pt^IV pyridinehydroxamic acid (pyhaH) complexes of general formula cis-[Pt^IICl₂(x-pyhaH)₂] and cis-[Pt^IVCl₄(x-pyhaH)₂], respectively (where x = 3 or 4) in which the pyridinehydroxamic acid is coordinated to the platinum ion via the pyridine nitrogen only leaving the hydroxamic acid free to potentially release cytotoxic nitric oxide (NO). The crystal structure of the Pt^IV derivative, cis-[PtCl₄(4-pyhaH)₂] · 2CH₃OH is reported. To establish the biological effect of the uncoordinated hydroxamic acid moiety in the Pt^II compounds synthesised, the corresponding pyridinecarboxylic acid (pycaH) complexes of general formula cis-[Pt^IICl₂(x-pycaH)₂] (where x = 3 or 4) and the Pt^II pyridine (py) complex, cis-[Pt^IICl₂(py)₂] were synthesised and served as reference standards. The NO-releasing properties of each of the Pt^II compounds, the pyhaH and the pycaH ligands were studied. The Pt^II pyridinehydroxamic acid derivatives were found to induce potent in vitro effects attributable to either NO-release from the hydroxamic acid moiety and/or stimulation of inducible nitric oxide synthase of endothelial cells.     

Rhenium(IV)–copper(II) heterobimetallic complexes: Synthesis,crystal structure and magnetic properties

Two Re(IV)–Cu(II) heterometallic complexes {(CuL_α)[ReCl₄(ox)]}_n (where L_α = N-meso-5,12-Me₂-7,14-Et₂-[14]-4,11-dieneN₄), 1, and (CuL_β)[ReCl₄(ox)] (L_β = N-rac-5,12-Me₂-7,14-Et₂-[14]-4,11-dieneN₄N-rac-5,12-Me₂-7,14-Et₂-[14]-4,11-dieneN₄), 2, were synthesized. The [CuL²⁺] macrocyclic cation is coordinated from above and below by [ReCl₄(ox)]²⁻ units through the chloro-ligands and creates a chloro-bridged heterometallic Re^IV–Cu^II one-dimensional zig-zag chain. Compound 2 can be viewed as a heterobimetallic dinuclear unit, in which the Re(IV)-Cu(II) centers are linked by an oxalato bridge. The magnetic behavior of 1 and 2 has been investigated over the temperature range 1.8–300 K. Compound 1 behaves like a ferrimagnetic {Re(IV)–Cu(II)} bimetallic, one-dimensional chain with intrachain antiferromagnetic coupling. Compound 2 shows a weak antiferromagnetic interaction within the [Re(IV)–Cu(II)] unit along with a strong single-ion anisotropy, D(Re) = −63 cm⁻¹.     

The crystal structure of the interrupted framework silicate K9.6Ca1.2Si12O30 determined from laboratory X-ray diffraction data

The crystal structure of a potassium calcium silicate with composition K_9.6Ca_1.2Si₁₂O₃₀ (or K₈CaSi₁₀O₂₅) has been solved by direct methods aided by distance least squares optimization from laboratory X-ray powder diffraction data. The trigonal compound adopts the non-centrosymmetric space group R3c with the following basic crystallographic data: a=11.13623(5) Å, c=21.9890(2) Å, V=2361.63(2) Å³, Z=3, D_calc=2.617 g cm⁻³. The crystal structure can be classified as an interrupted framework with exclusively Q³-units. It can be thought of as being built from layers parallel to (001) containing isolated six-membered tetrahedral rings in UDUDUD conformation. Corner sharing of tetrahedra belonging to adjacent sheets results in a tetrahedral framework. The framework density of the structure is 15.2 T-atoms/1000 Å³. The coordination sequences are identical for both silicon atoms in the asymmetric unit: 3-6-11-20-32-46-60-80-102-122. The vertex symbols for the two tetrahedral centers are 10₂·10₂·6₁. Topologically, the structure can be described as an Archimedean three-dimensional 3-connected net. It can be derived from the diamond or cristobalite net by removing 20% of the knots. Charge compensation in the structure is achieved by the incorporation of mono- and divalent M-cations (M: K, Ca). These extra-framework ions are coordinated by six to nine oxygen ligands. Ca/K distributions for the five symmetrically independent M-sites were obtained from a combination of bond distance considerations, site occupancy refinements and the bulk chemical composition. The structural characterization is completed by a detailed Raman spectroscopic study. Furthermore, possible implications of the structural chemistry of interrupted framework silicates for the field of silicate glass research are addressed.     

Crystal and solution structures of di-n-butyltin(IV) complexes of 5-[(E)-2-(4-methoxyphenyl)-1-diazenyl]quinolin-8-ol and benzoic acid derivatives: En route to elegant self-assembly via modulation of the tin coordination geometry

Reactions of ⁿBu₂SnCl(L¹) (1), where L¹ = acid residue of 5-[(E)-2-(4-methoxyphenyl)-1-diazenyl]quinolin-8-ol, with various substituted benzoic acids in refluxing toluene, in the presence of triethylamine, yielded dimeric mixed ligand di-n-butyltin(IV) complexes of composition [ⁿBu₂Sn(L¹)(L^2-6)]₂ where L² = benzene carboxylate (2), L³ = 2-[(E)-2-(2-hydroxy-5-methylphenyl)-1-diazenyl]benzoate (3), L⁴ = 5-[(E)-2-(4-methylphenyl)-1-diazenyl]-2-hydroxybenzoate (4), L⁵ = 2-{(E)-4-hydroxy-3-[(E)-4-chlorophenyliminomethyl]-phenyldiazenyl}benzoate (5) and L⁶ = 2-[(E)-(3-formyl-4-hydroxyphenyl)-diazenyl]benzoate (6). All complexes (1-6) have been characterized by elemental analyses, IR, ¹H, ¹³C and ¹¹⁷Sn NMR and ¹¹⁹Sn Mössbauer spectroscopy and their structures were determined by X-ray crystallography, complemented by ¹¹⁷Sn CP-MAS NMR spectroscopy studies in the solid state. The crystal structure of 1 reveals a distorted trigonal bipyramidal coordination geometry around the Sn-atom where the Cl- and N-atoms of ligand L¹ occupy the axial positions. In complexes 2-5, the molecules are centrosymmetric dimers in which the Sn-atoms are connected by asymmetric μ-O bridges through the quinoline O-atom to give an Sn₂O₂ core. The differences in the Sn-O bond lengths within the bridge range from 0.28 to 0.48 Å, with the longer of the Sn-O distances being in the range 2.56-2.68 Å and the most symmetrical bridge being in 5. The carboxylate group is almost symmetrically bidentate coordinated to the tin atom in 5 (Sn-O distances of 2.327(2) and 2.441(2) Å), unlike the other complexes in which the distance of the carboxylate carbonyl O-atom from the tin atom is in the range 2.92-3.03 Å. The structure of 5 displays a more regular pentagonal bipyramidal coordination geometry about each tin atom than in 2-4. In contrast, the centrosymmetric dimeric structure of 6 involves asymmetric carboxylate bridges, resulting in a different Sn₂C₂O₄ motif. The Sn-O bond lengths in the bridge differ by about 0.6 Å, with the longer distance involving the carboxylate carbonyl O-atom (2.683(2) and 2.798(2) Å for two molecules in the asymmetric unit). The carboxylate carbonyl O-atom has a second, even longer intramolecular contact to the Sn-atom to which the carboxylate group is primarily coordinated, with these Sn?O distances being as high as 3.085(2) and 2.898(2) Å. If the secondary interactions are considered, all the di-n-butyltin(IV) complexes (2-6) display a distorted pentagonal bipyramidal arrangement about each tin atom in which the n-butyl groups occupy the axial positions.