Chemoenzymatic dynamic kinetic resolution of acyloins

[Reaction: see text]. Acyloins (alpha-hydroxy ketones) are important building blocks in organic synthesis, e.g., for the total synthesis of epothilones. Optically pure acyloins can be obtained by lipase-catalyzed kinetic resolution (KR) of the racemate with, for example, Burkholderia cepacia lipase, but this process suffers from a yield limitation of 50%. To devise a dynamic kinetic resolution (DKR), we studied the racemization of two different acyloins and corresponding esters with various amine bases and ion exchangers. No combination of base and solvent was found that could selectively racemize the acyloin or corresponding ester under the conditions needed for a DKR. In contrast to bases, acidic resins (ARs) were found to racemize the acyloins selectively in n-hexane and in water. Unfortunately, the AR deactivated the lipase, preventing a one-pot DKR. Minor side reactions involving the AR, the substrate acyloin, and the vinyl ester acyl donor were also observed. However, an efficient DKR was made possible by the spatial separation of lipase and ion exchanger, with enzymatic transesterification and AR-catalyzed racemization taking place simultaneously in two compartments connected by a pump loop. The conversion of substrate alcohol was 91%, the selectivity toward the product butyrate ester 90%, and the enantiomeric excess of the (S)-product 93% ee.     

N,N-二甲基正十二烷基胺/无机含氧酸体系的相态结构研究

利用拟三元相图法研究了N,N-二甲基正十二烷基胺(DMDA)多元体系的相态结构,并用电导、偏光显微镜以及红外、紫外可见光谱等手段进行了表征.发现N,N-二甲基正十二烷基胺体系随水相含量的增加,铵盐发生不同形式的有序缔合,分别形成了W/O型微乳液、“节-结”型链状缔合体、层状液晶和O/W型微乳液;在层状液晶中,SO₄^2-主要以桥式双齿配位形式存在,中性胺分子有利于体系中液晶的形成;层状液晶于500nm波长处有一吸收峰,在430nm附近发生“光短路”现象,该现象可能对测定层状液晶的层间距有重要意义.     

Tandem dynamic kinetic resolution and enzymatic polycondensation to synthesize mPEG‐functionalized poly(amine‐co‐ester)‐type chiral prodrugs

Amphiphilic poly(amine‐co‐ester)s, which contain a single effective enantiomer of an asymmetric drug and thus can avoid potentially serious side effects, are difficult to prepare through nonselective chemical routes not only in the process of introducing chiral drugs to the polymer, but also in the synthesis of the polymer's backbone by metal catalysts. A model of racemic mexiletine, an important antiarrhythmic agent, was used to demonstrate the tandem combination of Candida antarctica lipase B (CAL‐B)‐ and Pd/C‐catalyzed dynamic kinetic resolution (DKR) and subsequent CAL‐B‐catalyzed polycondensation, as an efficient protocol to prepare poly(ethylene glycol)‐functionalized poly(amine‐co‐ester)s containing (R)‐mexiletine with 99% ee value. Chemoenzymatic DKR and enzymatic polymerization conditions were optimized, and the optical purity of incorporated (R)‐mexiletine was confirmed through its hydrolysis from polyester. The copolymers can readily self‐assemble into nanometer‐scale‐sized micelles with well‐dispersed spheres, which have a size distribution that can be efficiently adjusted by changing the polymer concentration. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

New Chiral Auxiliaries for Dynamic Kinetic Resolution: From Theory to Experiment

New efficient chiral auxiliaries for dynamic kinetic resolution (DKR) of bromides into amines are proposed, based on a theoretical rationalisation of known literature results. One example was synthesized and tested, affording diastereoselectivities up to 100 %. Several results of DKR reactions are known, based on oxazolidinone or imidazolidinone units as chiral auxiliaries. Nevertheless, their behaviour was not fully understood until a recent paper that we published. We now used our proposed mechanism to rationalize the behaviour of other similar chiral auxiliaries and to propose small structure changes in imidazolidinone rings which could largely improve their performance. We could show that the good performance of these molecules as chiral auxiliaries for DKR reactions where bromine is the leaving group and a primary or secondary amine is the nucleophile is due, in a first step, to the formation of a hydrogen bond between the amine and the ring carbonyl oxygen and, in a second step, to the strong electrostatic interaction between the leaving bromide and the carbonyl oxygen in the C‐3 substituent. Considering the behaviour of this substituent which rotates to minimize the electrostatic repulsion with the bromide when reaching the transition state, we proposed the introduction of a second substituent in the C‐4 position of the imidazolidinone ring, which prevents such rotation, thus increasing the energy difference between the transition states of the two distereoisomers. With such an auxiliary we were able to increase the best de known in literature (88 %), when benzylamine is used as nucleophile, to 99, or even 100 %, when iodide replaces the bromide in the substrate.     

New chiral auxiliaries for dynamic kinetic resolution: from theory to experiment

New efficient chiral auxiliaries for dynamic kinetic resolution (DKR) of bromides into amines are proposed, based on a theoretical rationalisation of known literature results. One example was synthesized and tested, affording diastereoselectivities up to 100%. Several results of DKR reactions are known, based on oxazolidinone or imidazolidinone units as chiral auxiliaries. Nevertheless, their behaviour was not fully understood until a recent paper that we published. We now used our proposed mechanism to rationalize the behaviour of other similar chiral auxiliaries and to propose small structure changes in imidazolidinone rings which could largely improve their performance. We could show that the good performance of these molecules as chiral auxiliaries for DKR reactions where bromine is the leaving group and a primary or secondary amine is the nucleophile is due, in a first step, to the formation of a hydrogen bond between the amine and the ring carbonyl oxygen and, in a second step, to the strong electrostatic interaction between the leaving bromide and the carbonyl oxygen in the C-3 substituent. Considering the behaviour of this substituent which rotates to minimize the electrostatic repulsion with the bromide when reaching the transition state, we proposed the introduction of a second substituent in the C-4 position of the imidazolidinone ring, which prevents such rotation, thus increasing the energy difference between the transition states of the two distereoisomers. With such an auxiliary we were able to increase the best de known in literature (88%), when benzylamine is used as nucleophile, to 99, or even 100%, when iodide replaces the bromide in the substrate.     

Dynamic Kinetic Resolution of Aldehydes by Hydroacylation

We report a dynamic kinetic resolution (DKR) of chiral 4‐pentenals by olefin hydroacylation. A primary amine racemizes the aldehyde substrate via enamine formation and hydrolysis. Then, a cationic rhodium catalyst promotes hydroacylation to generate α,γ‐disubstituted cyclopentanones with high enantio‐ and diastereoselectivities.     

Structural optimization of thiourea-based bifunctional organocatalysts for the highly enantioselective dynamic kinetic resolution of azlactones

This article describes the synthesis of a library of structurally diverse bifunctional organocatalysts bearing both a quasi-Lewis acidic (thio)urea moiety and a Br?nsted basic tertiary amine group. Sequential modification of the modular catalyst structure and subsequent screening of the compounds in the alcoholytic dynamic kinetic resolution (DKR) of azlactones revealed valuable structure-activity relationships. In particular, a "hit-structure" was identified which provides e.g.N-benzoyl-tert-leucine allyl ester in an excellent enantiomeric excess of 95%.     

伯胺N1923从乙酸体系中萃取Hg(O)的研究

伯胺N₁₉₂₃在盐酸体系中对Hg(Ⅱ)具有很好的萃取性能^[1]。本文报导伯胺N₁₉₂₃从乙酸体系中萃取Hg(Ⅱ)的机理。     

Development of a rapid,room-temperature dynamic kinetic resolution for efficient asymmetric synthesis of alpha-aryl amino acids

[reaction: see text] A rapid, highly efficient and general dynamic kinetic resolution (DKR) of racemic alpha-aryl UNCAs with the dual-function catalysis of modified cinchona alkaloid was accomplished at room temperature. This DKR led to the development of a highly enantioselective catalytic method for the practical synthesis of a wide range of alpha-aryl and alpha-heteroaryl amino acids in 89-92% ee and 86-95% yield from racemic UNCAs.     

离子色谱法测定空气中的氨、肼和乙醇胺

建立了抑制型离子色谱同时检测空气中氨、肼和乙醇胺的分析方法,并应用于评价工作场所空气的安全性。空气中的氨、肼和乙醇胺经甲基磺酸（MSA）水溶液吸收后,用0.22 μm滤膜过滤,除去不溶颗粒。使用新型ThermoFisher IonPac CS19羧酸型阳离子交换分析柱（250 mm×4 mm）和CG19保护柱（50 mm×4 mm）,以淋洗液发生器产生的MSA作为流动相,等度洗脱,采用抑制型电导检测器,同时分离和检测铵、肼和乙醇胺。结果表明,铵、肼和乙醇胺的检出限分别为0.003、0.011和0.016 mg/L,RSD为0.98%~1.6%。本方法操作简便,样品无需衍生化等复杂的前处理过程,在15 min内可完成对铵、肼和乙醇胺3种组分的分离测定,有效缩短检测时间,提高工作效率,具有较高的实用价值。     

Combined Dynamic Kinetic Resolution and C−H Functionalization for Facile Synthesis of Non-Biaryl-Atropisomer-Type Axially Chiral Organosilanes

Although asymmetric C−H functionalization has been available for the synthesis of structurally diverse molecules, catalytic dynamic kinetic resolution (DKR) approaches to change racemic stereogenic axes remain synthetic challenges in this field. Here, a concise palladium-catalyzed DKR was combined with C−H functionalization involving olefination and alkynylation for the highly efficient synthesis of non-biaryl-atropisomer-type (NBA) axially chiral oragnosilanes. The chemistry proceeded through two different and distinct DKR: first, an atroposelective C−H olefination or alkynylation produced axially chiral vinylsilanes or alkynylsilanes as a new family of non-biaryl atropisomers (NBA), and second, the extension of this DKR strategy to twofold o,o′-C−H functionalization led to the multifunctional axially chiral organosilicon compounds with up to >99 % ee.     

Quantitative amine functionalization of polymeric organolithium compounds with 3‐dimethylaminopropyl chloride in the presence of lithium chloride

The addition of lithium chloride promoted the coupling reaction of hydrocarbon solutions of poly(styryl)lithium (PSLi) and poly(isoprenyl)lithium (PILi) with 3‐dimethylaminopropyl chloride to form the corresponding ω‐dimethylamino‐functionalized polymers. Quantitative amine functionalization was achieved for PSLi and PILi in the presence of 1 and 10 equivalents, respectively, of LiCl in benzene; the functionalization efficiency was only 67% for PSLi and 85% for PILi in the absence of LiCl. The polymer products were characterized by size exclusion chromatography, thin‐layer chromatography, and amine end‐group titration. The pure amine‐functionalized polymers were isolated by silica gel column chromatography. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 145–151, 2000     

Tri-n-butylphosphane catalyzed ring opening of aziridines with secondary amines

Ring opening of aziridine with dialkyl amine took place readily in the presence of catalytic amounts of tri-n-butylphosphane （10 mol%） in the mixture of CH₃CN/H₂O（10:1）,giving corresponding vicinal diamines in mediate to high yields（58-95%） with good regioselectivitie,while aromatic secondary amine could not react under the same conditions.Tri-n-butylphosphane exhibited different catalytic selectivity to amines from Lewis acid catalysts.     

聚苯乙烯-三乙醇胺树脂催化合成苄叉丙酮

以苯甲醛和丙酮为原料,在水-氢氧化钠体系中以聚苯乙烯-三乙醇胺树脂为相转移催化剂合成了苄叉丙酮,收率达92.5%,并讨论了其反应机理.     

Membrane extraction for removal of acetic acid from biomass hydrolysates

Production of bioethanol from lignocellulosic biomass requires pretreatment of the biomass in order to improve the susceptibility of the cellulose to enzymatic hydrolysis to glucose. When dilute acid is used to perform this process, the hemicellulose is also hydrolyzed to its component sugars while simultaneously releasing acetyl groups attached to the hemicellulose backbone. Other compounds from the lignin and sugar degradation products are also produced that inhibit subsequent bioconversion of the solubilized sugars to the desired products. In this work we focused on removal of acetic acid from a dilute sulphuric acid pretreated corn stover hydrolysate.Acetic acid has been extracted into an organic phase at pH values below its pK_a. The organic phase diluent consisted of octanol. Alamine 336, a tertiary amine and Aliquat 336 a quaternary amine were used as the aliphatic amine extractants. Our results indicate more than 60% removal of acetic acid using Alamine 336. Extraction rates were much slower for Aliquat 336 probably due to the higher viscosity of the Aliquat 336/octanol phase.The presence of sulphate anions, as a result of dilute sulphuric acid pretreatment, results in the co-extraction of bisulphate anion. Bisulphate anion is preferentially extracted at pH values below its pK_a. Consequently the pH of the hydrolysate increases from between 1 and 2 to above 4.0 during extraction. In addition, extraction of low molecular weight lignins and phenolics is also observed. Thus the membrane extraction process developed here may be used not only for removal of acetic acid but also to adjust the pH of the hydrolysate to values that are more compatible for fermentation and to remove other inhibitory compounds.     

Simultaneous determination of florfenicol with its metabolite based on modified quick,easy, cheap,effective, rugged,and safe sample pretreatment and evaluation of their degradation behavior in agricultural soils

A simple and simultaneous method for the determination of florfenicol and its metabolite florfenicol amine in agricultural soils using modified quick, easy, cheap, effective, rugged, and safe sample pretreatment and reversed‐phase high‐performance liquid chromatography with tandem mass spectrometry is presented. Florfenicol and its metabolite florfenicol amine residues in agricultural soils were extracted with alkalized acetonitrile and an aliquot was cleaned up with Si(CH₂)₃NH (CH₂)₂NH₂ and C₁₈ sorbent, which were powder materials. High‐performance liquid chromatography with tandem mass spectrometry was applied to simultaneously determine the level of florfenicol and florfenicol amine in agricultural soils. Excellent linearity was achieved for florfenicol and florfenicol amine over a range of concentrations from 0.1–500 μg/L with coefficients more than 0.99. Average recoveries at four different levels (0.005, 0.05, 0.5, and 5.0 mg/kg) for florfenicol and florfenicol amine ranged from 73.6–94.9% with relative standard deviations of 2.9–12.5%. The limits of detection for florfenicol and florfenicol amine in agricultural soils were 2.0 μg/kg, and the limits of quantification were 6.0 μg/kg. Based on this method, the degradation behavior of florfenicol and its metabolite florfenicol amine in three soils (Nanchang, Hangzhou, and Changchun) under sterilized and native conditions was investigated and the transformation rate of florfenicol amine from florfenicol was evaluated.     

手性伯胺催化剂用于顺式选择性的不对称Cross-Aldol反应

基于酸碱作用,将手性伯胺与质子酸原位结合制得有机小分子催化剂,并用于醛与醛的不对称Cross-aldol反应.与一般手性仲胺催化剂不同,该类伯胺催化剂得到的是顺式选择性构型的Cross-aldol产物,其产率达90%,顺反比和ee值分别为9:1和90%.相比而言,采用简单易得的(1S,2S)-(+)-环己二胺即可得到较高选择性的顺式产物.     

Separation and characterization of oligomeric hindered amine light stabilizers using high‐performance liquid chromatography with UV and quadrupole time‐of‐flight mass spectrometric detection

Hindered amine light stabilizers are an important class of stabilizers that protect synthetic polymers from degradation and thus from changing mechanical and optical properties. The current study presents an HPLC method capable of separating oligomeric hindered amine light stabilizers on a commercially available stationary phase, employing an MS‐compatible novel mobile phase. Based on the exact masses observed with Q‐TOF‐MS, a comprehensive characterization of five different types of oligomeric hindered amine light stabilizers was achieved, leading to structural information not included in the datasheets provided by the suppliers. For the different investigated hindered amine light stabilizers, a number of recurring units up to 17 and a molecular weight of 5200 g/mol were detected. Furthermore, the analysis of stabilizer extracts of processed polypropylene samples containing different types of hindered amine light stabilizers revealed significant differences in the oligomeric pattern between standards and polymer samples. Thus, changes in the analytes’ oligomeric pattern resulting from processing or aging of polymer materials can be monitored with the presented method.     

Do epoxy–amine networks become inhomogeneous at the nanometric scale?

Epoxy–amine networks are known to be homogeneous. However, using new analysis tools that allow the observation scale to be reduced to a nanometric level, some authors have stated the opposite. In this work, the network morphology has been studied with atomic force microscopy in the tapping mode as a function of the hardener nature and the stoichiometry of the reactive blend. A very homogeneous epoxy network topography, similar to that of an amorphous thermoplastic, has been obtained. For comparison, a truly heterogeneous network topography, like that of unsaturated thermosets cured by free‐radical mechanisms, has been imaged. For the observation of surfaces on a scale smaller than a nanometer, caution must be taken:(1) the tips must be freshly cleaned so that distortion on the image is prevented and (2) the surfaces must be very flat so that the phase contrast is not influenced significantly by differences in the sample topography. This works gives guidelines on using atomic force microscopy in the tapping mode for epoxy–amine network characterization and discusses epoxy–amine network homogeneity. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2422–2432, 2003     

磁性碱木素胺稳定的Ru纳米粒子催化α-蒎烯加氢反应

通过Mannich反应在碱木素结构中引入胺源,再结合共沉淀法制备了包裹Fe₃O₄磁核的稳定金属粒子的碱木素胺载体,并进一步构建了催化可再生资源α-蒎烯加氢反应的Ru纳米粒子催化剂.通过元素分析、粉末X射线衍射、傅里叶变换红外光谱、电感耦合等离子体原子发射光谱、透射电子显微镜、热重分析和X射线光电子能谱等方法对该催化剂进行表征.结果表明,碱木素中的苯环和含氧基团均对金属粒子有稳定作用,但胺源的引入可更加有效地稳定金属粒子.经过对催化剂制备工艺、木质素类型、胺源类型和胺源含量的筛选,得到活性最优的催化剂Fe₃O₄@0.8ALN₁-Ru, Ru负载量为1.92 mmol/g, Ru粒子粒径为(2.1±0.5)nm.该催化剂在n(α-蒎烯)/n(Ru)=65.8, 1 MPa H₂条件下70℃催化1 mLα-蒎烯加氢反应2 h,可获得99.64%的α-蒎烯转化率和96.52%的顺式蒎烷选择性,并表现出良好的重复使用稳定性.