Synthesis of carbo- and heterobiaryls by intermolecular radical addition of aryl bromides onto aromatic solvents

Tris(trimethylsilyl)silane (TTMSS) and azabisisobutyronitrile (AIBN) promoted the intermolecular arylation of aryl and heteroaryl bromides onto aromatic solvents under thermal conditions via a radical pathway.     

Pyridinium N-2′-pyridylaminide: radical cyclization in the synthesis of annulated 2-aminopyridines

The synthesis of annulated 2-aminopyridines by intramolecular radical pyridylation of the appropriate substrates, obtained from pyridinium N-2′-pyridylaminide, can be performed using TTMSS and AIBN.     

Pyridinium N-2′-pyridylaminide: radical cyclization for the synthesis of benzonaphthyridine derivatives

The synthesis of benzonaphthyridine derivatives that incorporate a 2-aminopyridine moiety can be performed by intramolecular radical pyridylation of the appropriate substrates, obtained from pyridinium N-2′-pyridylaminide, using TTMSS and AIBN.     

The reaction of benzothiazole sulfenamide with (TMS)3SiH: An example of degenerate-branched chain process

The reaction of sulfenamide 3 with (TMS)₃SiH initiated by the decomposition of AIBN at 76 °C has been studied in some detail. The reaction is a rare example of a radical chain-branching process. The two main products are dialkylamine 4 and the thiosilane 5. It is also established that 2-mercaptobenzothiazole (2) is formed in a substantial yield as one of the by-products. The mechanism of this chain autocatalytic reaction is complex due to a mix of different radical chain reactions and some discussion is provided. The amine obtained in a quantitative yield can arise from two independent routes of attack of (TMS)₃Si radical on sulfenamide 3. The minor route affords thiol 2 that can act as a catalyst for the major route during the reaction course and then gives a salt with secondary amine, which precipitates upon cooling. The origin of autocatalysis is discussed in some detail.     

An efficient copper(II)-catalyzed synthesis of benzothiazoles through intramolecular coupling-cyclization of N-(2-chlorophenyl)benzothioamides

A wide range of 2-aryl or 2-alkyl-substituted benzothiazoles are synthesized through intramolecular C_(aryl)-S bond forming-cyclization using copper(II)-BINAM-catalyzed coupling of less reactive N-(2-chlorophenyl)benzo or alkylthioamide under mild reaction conditions (82 °C).     

Free radical SH2′ reaction mechanism study by comparing free radical SH2′ reaction with free radical addition reaction

It is not clear whether the mechanism of the S_H2′ reaction of allyl chloride is concerted or stepwise. The relative rates of the competitive free radical addition to two different double bonds in (2-chloroallyl)-(2-choromethylallyl) ether have been determined. There are two competitive free radical addition reactions, one is free radical S_H2′ reaction and the other is free radical addition reaction. The mechanism of the S_H2′ reaction is discussed by comparing free radical S_H2′ reaction with free radical addition reaction.     

A practical synthesis of 2-(N-substituted)-aminobenzimidazoles utilizing CuCl-promoted intramolecular cyclization of N-(2-aminoaryl)thioureas

A practical protocol for synthesis of 2-(N-substituted)-aminobenzimidazoles was developed. N-(2-Aminoaryl)thioureas undergo a CuCl-promoted intramolecular cyclization to give the corresponding 2-(N-substituted amino)benzimidazoles in good to excellent isolated yields.     

Microwave-assisted synthesis of 1-aryl-1H-indazoles via one-pot two-step Cu-catalyzed intramolecular N-arylation of arylhydrazones

A highly efficient one-pot two-step microwave procedure was developed for the synthesis of 1-aryl-1H-indazoles. Microwave heating of 2-halobenzaldehydes or 2-haloacetophenones with phenylhydrazines at 160 °C for 10 min quantitatively yielded the arylhydrazones, which were further cyclized to give 1-aryl-1H-indazoles via CuI/diamine-catalyzed N-arylation under microwave heating (160 °C, 10 min). Good to excellent yields were observed for 2-iodo, 2-bromo, and 2-chloro benzaldehydes or acetophenones.     

Some aspects of nitroxide-mediated living radical polymerization of N-(p-vinylbenzyl)phthalimide

The free radical polymerization of N-(p-vinylbenzyl)phthalimide (VBP) “initiated” with the adduct of 2-benzoyloxy-1-phenylethyl and TEMPO (BS-TEMPO) or TEMPO-terminated polystyrene (PS-TEMPO) in N,N-dimethylformamide (DMF) at 125 °C was found to proceed in a living fashion, providing low-polydispersity PVBP and block copolymers of the type PS-b-PVBA, where TEMPO is 2,2,6,6-tetramethylpiperidinyl-1-oxy. Unlike TEMPO-mediated styrene polymerization, the polymerization rate slightly but distinctly depended on the adduct concentration, which was interpretable as a pre-stationary behavior. The hydrolysis of those polymers gave poly(p-aminomethylstyrene) (PAMS) and PS-b-PAMS, and further treatment of the block copolymer with hydrogen chloride provided an amphiphilic block copolymer. The polymeric amphiphile was used as an emulsifier in emulsion polymerization to produce a positively charged polymeric microsphere.     

An amide orthoesterification route to N-(1′-alkylthioglucopyranosyl)indoles

The addition of 3-methylindolylmagnesium bromide to tetra-O-benzyl-α-d-gluconothionolactone yields the expected indole N-gluconothioamide as its hemiorthothioamide tautomer. The thiol function is alkylated to yield the corresponding orthothioamide, a 1′-alkylthio-substituted N-glycoside. Alternatively, the 1′-alkylthio-N-glycoside can be accessed from the corresponding indole N-gluconamide via a boron trifluoride-etherate mediated orthoesterification with ethanethiol. Radical reduction of the orthothioamide yields the N-glycosides in 2:1 stereoselectivity in favor of the β-N-glycoside, while reduction via the oxonium ion leads to an improved 6:1 selectivity.     

N-Polyfluoroethyl and N-2-chlorodifluorovinyl derivatives of azoles

Reactions of tetrafluoroethylene, chlorotrifluoroethylene and 1,2-dichlorodifluoroethylene with N-potassium salts of imidazole, 2-methylbenzimidazole, 3,5-dimethylpyrazole, 1,2,4-triazole, and benzotriazole lead to the formation of the corresponding N-(1,1,2,2-tetrafluoroethyl), N-(2-chloro-1,1,2-trifluoroethyl), and N-(2-chloro-1,2-difluorovinyl) azoles. Treatment of N-(2-chloro-1,2-difluorovinyl) and N-(2-chloro-1,1,2-trifluoroethyl) derivatives of azoles with tetramethylammonium fluoride is a useful synthetic method for the preparation of heterocycles with 1,2,2,2-tetrafluoroethyl group attached to nitrogen.     

Enantioselective synthesis of (2S,3′R,7′Z)-N-(3′-hydroxy-7′-tetradecenoyl)-homoserine lactone

A concise enantioselective total synthesis of (2S,3′R,7′Z)-N-(3′-hydroxy-7′-tetradecenoyl)-homoserine lactone is described. Key feature of this protocol is a catalytic asymmetric hydrogenation and a prophenol-zinc-catalyzed diazo addition to imine reaction as genesis of chirality. Moreover, flexibility is built in the synthesis to generate enantioenriched analogs using catalytic amount of enantioenriched C₂-symmetric ligands.     

N-(Diethoxyphosphoryl)-O-benzylhydroxylamine—a convenient substrate for the synthesis of N-substituted O-benzylhydroxylamines

Easily available N-(diethoxyphosphoryl)-O-benzylhydroxylamine was shown to be convenient, orthogonally protected substrate for regioselective N-alkylation by means of diverse halides under basic conditions (sodium hydride/tetrabutylammonium bromide). An efficient procedure for dephosphorylation of N-substituted N-(diethoxyphosphoryl)-O-benzylhydroxylamine to provide N-substituted O-benzylhydroxylamines was also established.     

Convenient synthesis of N-isobutyryl-2′-O-methyl guanosine by efficient alkylation of O-trimethylsilylethyl-3′,5′-di-tert-butylsilanediyl guanosine

We present a novel route for the synthesis of N²-isobutyryl-2′-O-methyl guanosine, introducing 3′,5′-di-tert-butylsilyl and O⁶-trimethylsilylethyl groups as efficient protections during the 2′-O-methylation step with NaH/CH₃I. These protections were then removed simultaneously in a single step with TBAF. The eight-step synthesis is easy to perform, employing convenient commercially available reagents; crude mixtures are of satisfying purity, so only three chromatography purifications were required. Title compound was obtained in 25% overall yield from guanosine.     

A mechanistic investigation of (Me3Si)3SiH oxidation

The interaction of (Me₃Si)₃SiH with O₂ is known to afford (Me₃SiO)₂Si(H)SiMe₃ in which the two oxygen atoms arise from the same oxygen molecule. In order to investigate the mechanism of this unusual reaction, the oxidation rates were measured in the temperature range 30-70 °C by following oxygen uptake in the presence and absence of hydroquinone as inhibitor. The rate constant for the spontaneous reaction of (Me₃Si)₃SiH with O₂ was determined at 70 °C to be ∼3.5 × 10⁻⁵ M⁻¹ s⁻¹. A sequence of the propagation steps is proposed by combining the previous and present experimental findings with some theoretical results obtained at the semiempirical level. These calculations showed that the silylperoxyl radical (Me₃Si)₃SiOO undergoes three consecutive unimolecular steps to give (Me₃SiO)₂Si()SiMe₃. Evidence has been obtained that the rate determining step is the rearrangement of silylperoxyl radical to a dioxirand-like pentacoordinated silyl radical. Our findings are of considerable importance for the understanding of the oxidation of hydrogen-terminated silicon surfaces.     

A novel intramolecular Ugi 3CC for the synthesis of N-alkyl-3-oxo-2-aryl-1,2,3,4-tetrahydropyrazino[1,2-a]indole-1-carboxamides

An intramolecular Ugi reaction of 2-(2-formyl-1H-indol-1-yl)acetic acid with aryl amines and isocyanides has been developed to produce a novel class of N-alkyl-3-oxo-2-aryl-1,2,3,4-tetrahydropyrazino[1,2-a]indole-1-carboxamides in good yields. This is the first report on intramolecular Ugi three component reaction of 2-(2-formyl-1H-indol-1-yl)acetic acid, aryl amine, and isonitrile.     

A versatile synthesis of poly(lauryl acrylate) using N-(n-octyl)-2-pyridylmethanimine in copper mediated living radical polymerization

A facile synthesis of poly(lauryl acrylate) has been achieved by atom transfer radical polymerization using benzyl-2-bromoisobutyrate, copper (I) bromide, and N-(n-octyl)-2-pyridylmethanimine (OPMI). The latter was of great interest as its synthesis was very easy to carry out and as it allowed the reaction mixture to be homogeneous, which was essential for the control of the reaction. The polymerization was controlled under these conditions and was optimized with the addition of copper (II) bromide as deactivator. We proved that the synthesis of poly(lauryl acrylates) with well defined molecular weights and narrow polydispersities was possible using a ligand which does not require difficult synthesis and purification. We also showed the ability of pyridylmethanimine ligands to control ATRP of an acrylate derivative. Best results were obtained at 130 °C in xylene for [Initiator]₀/[Cu(I)Br]₀/[Cu(II)Br₂]₀/[OPMI]/[lauryl acrylate] equal to 1/1/0.05/2.2/181, respectively (M_n = 19,942, DPI = 1.28).     

Improved synthesis of N-alkyl substituted dithieno[3,2-b:2′,3′-d]pyrroles

A new, convergent and improved synthetic method to prepare N-alkyl substituted dithienopyrroles is described. The procedure consists of a Pd-catalyzed amination of 3,3′-dibromo-2,2′-bithiophene. The reaction conditions were optimized, which makes this method applicable to prepare these molecules easily in high yields and on a large scale.     

Dimolybdenum complexes containing anions of N,N′-bis(pyrimidine-2-yl)formamidine and N-(2-pyrimidinyl)formamide

The reactions of Mo₂(O₂CCH₃)₄ with different equivalents of N,N′-bis(pyrimidine-2-yl)formamidine (HL1) and N-(2-pyrimidinyl)formamide (HL2) afforded dimolybdenum complexes of the types Mo₂(O₂CCH₃)(L1)₂(L2) (1) trans-Mo₂(L1)₂(L2)₂ (2) cis-Mo₂(L1)₂(L2)₂ (3) and Mo₂(L2)₄ (4). Their UV–Vis and NMR spectra have been recorded and their structures determined by X-ray crystallography. Complexes 2 and 3 establish the first pair of trans and cis forms of dimolybdenum complexes containing formamidinate ligands. The L1 ligands in 1–3 are bridged to the metal centers through two central amine nitrogen atoms, while the L2 ligands in 1–4 are bridged to the metal centers via one pyrimidyl nitrogen atom and the amine nitrogen atom. The Mo–Mo distances of complexes 1 [2.0951(17) Å], 2 [2.103(1) Å] and 3 [2.1017(3) Å], which contain both Mo?N and Mo?O axial interactions, are slightly longer than those of complex 4 [2.0826(12)–2.0866(10) Å] which has only Mo?O interactions.     

Synthesis of 1H-pyrrolo[3,2-c]quinoline derivatives via palladium-catalyzed heteroannulation of 2-aryl-3-iodo-4-(phenylamino)quinolines and 4-(N,N-allylphenylamino)-2-aryl-3-iodoquinolines

Palladium(0)/copper iodide catalyzed Sonogashira cross-coupling of 2-aryl-3-iodo-4-(phenylamino)quinolines with terminal alkynes afforded series of 1,2,4-trisubstituted 1H-pyrrolo[3,2-c]quinolines in a single-step operation. Conversely, the 4-(N,N-allylphenylamino)-2-aryl-3-iodoquinoline derivatives were found to undergo PdCl₂(PPh₃)₂/CuI catalyzed intramolecular Heck reaction to yield the corresponding 1,3,4-trisubstituted 1H-pyrrolo[3,2-c]quinolines.