Fullerene encapsulation with calix[5]arenes

This paper presents the synthesis of the fullerene hosts based on the calix[5]arenes and their binding properties. Calix[5]arenes 1a, 2, 3a bind C₆₀ or C₇₀ in organic solvents. The solvent effect of the fullerene complexation was clearly observed; the association constant decreases in a solvent with high solubility for C₆₀. Covalently linked double-calix[5]arenes 4-6 were also investigated on their binding properties for fullerenes in organic solvents. Their binding abilities for both C₆₀ and C₇₀ are extremely high in toluene solution. Higher binding selectivity toward C₇₀ is observed by all the double-calix[5]arenes. The selectivity of 5a toward C₇₀/C₆₀ is highest in toluene with a value of 10. The structures of the supramolecular complexes of the calix[5]arene hosts and C₆₀ or C₇₀ were investigated by using ¹H and ¹³C NMR studies. The molecular mechanics calculation and X-ray structure reveal that the interior of the calix[5]arene is complementary to the exterior of C₆₀ molecule. In contrast, the host-guest complexes of C₇₀ with the simple calix[5]arenes take many conformational options due to its less symmetric shape. The molecular mechanics calculation and our chemical shift simulation nicely worked to estimate the reliable structures; the calix[5]arene cavity takes up C₇₀ molecule, and the C₇₀ molecule tilts significantly from the C5 axis of the calix[5]arene. In the case of the host-guest complex of C₇₀ with the double-calix[5]arene, the molecular dynamics simulation of the host-guest complex represented the realistic movement of the bound C₇₀ inside the cavity. The combination of the molecular dynamics simulation and the chemical shift simulation of the host-guest complex suggested that the C₇₀ molecule rapidly moves inside the cavity.     

Syntheses and crystal structures of azafulleroid and aziridinofullerene bearing silyl or germyl benzene

Addition of silyl and germylmethyl azides (1) to fullerene C₆₀ at 50 °C through [2+3] cycloaddition led to the formation of the triazoline adducts (2). Subsequently, heating 2 at 100 °C in the solid state, caused N₂ extrusion producing two different isomers, [5,6]-azafulleroid (3) and [6,6]-aziridinofullerene (4). The ¹³C NMR spectrum of 3 had an absence of resonances in the aliphatic region for the fullerene C₆₀ cage, showing a fulleroid with C_S symmetry. In contrast, 4 exhibited one sp³ resonance in the aliphatic region for the fullerene C₆₀ cage, indicative of an aziridinofullerene with C_2V symmetry. However, MALDI-TOF mass characterization was hampered because ion peaks corresponding to the bis-adduct are detected in positive ion mode measurements, whereas the ion peaks [M−N₂]⁻ for 2a as well as [M]⁻ for 3a and 4a are observed in negative ion measurements. In an effort to obtain X-ray data, silyl and germylphenyl groups were introduced to form intermolecular complexes with fullerene C₆₀. The X-ray structures of 3c and 3d revealed a strong enhancement of homoconjugation in the bridged annulene moiety based on POAV analysis. The X-ray structures of 3c,d and 4c were confirmed with the detection of silyl and germylphenyl-C₆₀ interactions, similar to dimethoxyphenyl-C₆₀ interactions.     

Inclusion of methano[60]fullerene derivatives in cavitand-based coordination cages

The X-ray study of self-assembled coordination cage 1, constituted of two tetrapyridyl-substituted resorcin[4]arene cavitands coupled through four square-planar palladium complexes is reported. The coordination cage, embracing an internal cavity of ca. 840 Å³, reveals to have the right size for the inclusion of large molecules such as fullerenes. Cage 1 forms 1:1 complexes with methano[60]fullerene derivatives 3 and 4 bearing a dimethyl and a diethyl malonate addend, respectively. Evidence for inclusion complexation was provided by ¹H NMR spectroscopic studies and ESI-MS investigations, which unambiguously showed the formation of 1:1 fullerene-cage complexes. The association constants (K_a) were experimentally determined to be ca. 150 M⁻¹ at 298 K in CD₂Cl₂. In both complexes 1·3 and 1·4, the malonate residue is threaded through one of the four lateral portals, as clearly shown by docking simulations.     

Supramolecular nanostructured assemblies of different types of porphyrins with fullerene using TiO2 nanoparticles for light energy conversion

TiO₂ nanoparticles were modified with porphyrin derivatives, 5-[4-benzoic acid]-10,15,20-tris[3,5-di-tert-butylphenyl]-21H,23H-porphyrin (Ar-H₂P-COOH), 5-[4-benzoic acid]-10,20-tris[3,5-di-tert-butylphenyl]-21H,23H-porphyrin (H-H₂P-COOH), and 5,10,15,20-tetra[4-benzoic acid]-21H,23H-porphyrin (H₂P-4COOH). The porphyrin-modified TiO₂ nanoparticles were deposited on nanostructured OTE/SnO₂ electrode together with nanoclusters of fullerene (C₆₀) in acetonitrile-toluene (3/1, v/v) using an electrophoretic deposition technique to afford the porphyrin-modified TiO₂ composite electrode denoted as OTE/SnO₂/(porphyrin-modified TiO₂ nanoparticle+C₆₀)_n. The porphyrin-modified TiO₂ composite electrodes have efficient light absorbing properties in the visible region, exhibiting the photoactive response under visible light excitation using redox couple. The incident photon-to-photocurrent efficiency (IPCE) values of supramolecular nanostructured electrodes of porphyrin-modified TiO₂ nanoparticles with fullerene [OTE/SnO₂/(Ar-H₂P-COO-TiO₂+C₆₀)_n, OTE/SnO₂/(H-H₂P-COO-TiO₂+C₆₀)_n, and OTE/SnO₂/(H₂P-4COO-TiO₂+C₆₀)_n] are much larger than those of the reference systems of porphyrin-modified TiO₂ nanoparticles without C₆₀ [OTE/SnO₂/(Ar-H₂P-COO-TiO₂)_n, OTE/SnO₂/(H-H₂P-COO-TiO₂)_n, and OTE/SnO₂/(H₂P-4COO-TiO₂)_n]. In particular, the maximum IPCE value (41%) is obtained for OTE/SnO₂/(H-H₂P-COO-TiO₂+C₆₀)_n under the bias potential of 0.2 V versus SCE. This indicates that the formation of supramolecular complexes between porphyrins and fullerene on TiO₂ nanoparticles plays an important role in improvement of the light energy conversion properties.     

Phosphite ligands derived from distally and proximally substituted dipropyloxy calix[4]arenes and their palladium complexes: Solution dynamics, solid-state structures and catalysis

Two bisphosphite ligands, 25,27-bis-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (3) and 25,26-bis-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy-p-tert-butyl calix[4]arene (4) and two monophosphite ligands, 25-hydroxy-27-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (5) and 25-hydroxy-26-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy- p-tert-butyl calix[4]arene (6) have been synthesized. Treatment of (allyl) palladium precursors [(η³-1,3-R,R′-C₃H₄)Pd(Cl)]₂ with ligand 3 in the presence of NH₄PF₆ gives a series of cationic allyl palladium complexes (3a-3d). Neutral allyl complexes (3e-3g) are obtained by the treatment of the allyl palladium precursors with ligand 3 in the absence of NH₄PF₆. The cationic allyl complexes [(η³-C₃H₅)Pd(4)]PF₆ (4a) and [(η³-Ph₂C₃H₃)Pd(4)]PF₆ (4b) have been synthesized from the proximally (1,2-) substituted bisphosphite ligand 4. Treatment of ligand 4 with [Pd(COD)Cl₂] gives the palladium dichloride complex, [PdCl₂(4)] (4c). The solid-state structures of [{(η³-1-CH₃-C₃H₄)Pd(Cl)}₂(3)] (3f) and [PdCl₂(4)] (4c) have been determined by X-ray crystallography; the calixarene framework in 3f adopts the pinched cone conformation whereas in 4c, the conformation is in between that of cone and pinched cone. Solution dynamics of 3f has been studied in detail with the help of two-dimensional NMR spectroscopy.The solid-state structures of the monophosphite ligands 5 and 6 have also been determined; the calix[4]arene framework in both molecules adopts the cone conformation. Reaction of the monophosphite ligands (5, 6) with (allyl) palladium precursors, in the absence of NH₄PF₆, yield a series of neutral allyl palladium complexes (5a-5c; 6a-6d). Allyl palladium complexes of proximally substituted ligand 6 showed two diastereomers in solution owing to the inherently chiral calix[4]arene framework. Ligands 3, 6 and the allyl palladium complex 3f have been tested for catalytic activity in allylic alkylation reactions.     

Di- and tetracarboxylate ligands for highly luminescent terbium(III) complexes on the basis of sulfonylcalix[4]arene scaffold

New di- (2) and tetracarboxylate ligands (4) were prepared on a sulfonylcalix[4]arene platform by O-alkylation of thiacalix[4]arene with ethyl bromoacetate, followed by hydrolysis of the ester function and oxidation of the sulfide bridges. The sulfonyl-based ligands 2 and 4 formed luminescent 1:1 complexes with terbium(III) ion having higher luminescent quantum yield (Φ = 0.29₁ and 0.28₇, respectively) than 1:1 complexes of the corresponding thiacalix[4]arene-based di- (1) and tetracarboxylate ligands (3) (Φ = 0.03₈ and 0.00₃, respectively), implying higher efficiency of sulfonyl ligands (2 and 4) than those of thia ligands (1 and 3) in the energy transfer process.     

Three novel bismetallacyclopropa[60]fullerene complexes formed via intermediate monometallacyclopropa[60]fullerene diphosphine ligands

The homodinuclear bismetallacyclopropa[60]fullerene complexes (η²-C₆₀)M(μ-η¹,η¹-trans-Ph₂PCHCH PPh₂)₂M(η²-C₆₀) (1, M = Pt; 2, M = Pd) were prepared by reaction of C₆₀ with M(dba)₂ (dba = dibenzylideneacetone) and trans-1,1′-bis(diphenylphosphino)ethylene in 82% and 92% yield, whereas reaction of C₆₀ with Pd(dba)₂ and trans-dppet followed by treatment with C₆₀ and Pt₂(dba)₃ gave rise to the heterodinuclear complex (η²-C₆₀) Pd(μ-η¹,η¹-trans-Ph₂PCHCH PPh₂)₂Pt(η²-C₆₀) (3) in 65% yield. Mechanistic study showed that these reactions involve the intermediates of monometallacyclopropa[60]fullerene diphosphine ligands (η²-C₆₀)M(η¹-trans-Ph₂PCHCHPPh₂)₂ (4, M = Pt; 5, M = Pd). All the mono- and bismetallacyclopropa[60]fullerene complexes 1-5 have been fully characterized by elemental analysis and spectroscopy, as well as for 2 by X-ray crystallography.     

Synthesis and catalytic activity of rhodium diene complexes bearing indenyl-type fullerene η-ligand

Rhodium η⁵-complexes bearing an indenyl-type fullerene ligand, Rh[C₆₀(PhCH₂)₂Ph](cod) (2), Rh[C₆₀(PhCH₂)₂Ph](nbd) (3) and Rh(C₇₀Ph₃)(cod) (4), have been synthesized from the corresponding fullerene tri-adducts in 93-96% yields. X-ray crystallographic analysis of 4 indicated that the structure of 4 is similar to that of Rh(Ind)(cod). The rhodium complex 2 catalyzes alkyne trimerization reactions and hydroboration reactions.     

Multiple hydrogen-bond-induced supramolecular nanostructure from a pincer-like molecule and a [60]fullerene derivative

A new supramolecular self-assembled system between a perylene bisimide bearing diaminopyridine-substituted isophthalamide groups (PP) and a [60]fullerene containing barbituric acid moiety (C₆₀bar) through a complementary six-point hydrogen-bonding interaction was constructed. The formation of hydrogen bonding was confirmed by ¹H NMR spectra studies in CDCl₃. Fluorescence quenching experiments indicated that the fluorescence of PP was greatly quenched by the hydrogen-bonded C₆₀bar (K_sv=2.71×10⁴ M⁻¹). A steady and rapid cathodic 0.15 μA cm⁻² photocurrent response of the PP/C₆₀bar film deposited onto an ITO electrode was produced under the irradiation of 20 mW cm⁻² white light, indicating the presence of photo-induced electron transfer between PP and C₆₀bar. TEM images showed that spherical particles were fabricated by the self-assembly of PP and C₆₀bar through hydrogen-bonding interaction.     

Synthesis of novel calix[4]arenes containing organosilicon groups

Metalation of (RSiMe₂)₃CH (1a R = H, 1b R = Me, 1c R = Ph) with lithium diisopropylamide (LDA) or methyllithium in THF gave organolithium reagents (RSiMe₂)₃CLi, which reacted with the formylated calixarene (2), to give the corresponding 5,17-bis[2,2-bis(organosilyl)-1-ethenyl]-25,26,27,28-tetrapropoxycalix[4]arenes (3a, 3b and 3c) via the Peterson olefination. The compounds (RSiMe₂)₃CLi were treated with 25,26,27,28-tetrakis(4-bromobutoxy)calix[4]arene (4) to give 25,26,27,28-tetrakis[4-(tris(dimethylsilyl)methyl)butoxy] calix[4]arene (5a) and 25,26,27,28-tetrakis[4-(tris(trimethylsilyl)methyl)butoxy] calix[4]arene (5b) via nucleophilic substitution reactions. However the compound 25,26,27,28-tetrakis[4-(tris(dimethylphenylsilyl)methyl)butoxy] calix[4]arene (5c) was not obtained, presumably because (PhSiMe₂)₃C- is highly sterically hindered and the reactivity of its derivatives is low. The compound 5a has potential as a core for dendrimers.     

Palladium and platinum complexes of chiral and achiral calix[4]arene bisphosphite ligands

Chiral and achiral p-tert-butyl-calix[4]arene bisphosphites (L¹–L³) have been synthesized by the reaction of p-tert-butyl-calix[4]arene and the phosphorodichloridites, ROPCl₂ [R = (1S,2R,5R)-(+)-iso-menthyl (L¹), (1R,2S,5R)-(−)-menthyl (L²) or C₆H₄Bu^t-4 (L³)]. These bisphosphites function as chelating ligands in palladium(II) and platinum(II) complexes which are formed in good yields by the reaction of PdCl₂(PhCN)₂, MCl₂(COD) (M = Pd or Pt) or PdMeCl(COD) with the respective calix[4]arene bisphosphite. Single crystal X-ray diffraction studies performed on the complexes [PdCl₂(L¹)], [PdCl₂(L²)], [PdCl₂(L³)] and [PtCl₂(L³)] reveal a near square planar geometry around the metal with the two chloride ligands in a cis disposition. The crystal packing in the complexes [PdCl₂(L¹)] and [PdCl₂(L²)], which crystallize in the chiral (P6₁22) space group, shows different hydrophobic channels with intermolecular C–H?Cl hydrogen bonding. The complexes [PdCl₂(L³)] and [PtCl₂(L³)] are isostructural and the molecules in the crystal lattice are linked by intermolecular C–H?Cl and C–H?O hydrogen bonds.     

Thermal and microwave assisted reactions of 2,5-disubstituted thienosultines with [60]fullerene: non-Kekulé biradicals and self-sensitized oxygenation of the cycloadduct

Refluxing an o-dichlorobenzene solution of 2,5-disubstituted thienosultines 10a-f with [60]fullerene for 2-24 h gave both 1:1 and 2:1 cycloadducts in 37-79% isolated yields. The reaction was highly accelerated by microwave irradiation giving comparable yields of cycloadducts. Sultines 10a-f underwent cheletropic extrusion of SO₂ to form the corresponding non-Kekulé biradical intermediates 11a-f, which were subsequently trapped by [60]fullerene to form corresponding cycloadducts. The activation energy barriers (ΔG_c^≠) determined for the boat-to-boat inversion of these 4′,5′,6′,7′-tetrahydrobenzo[c]thieno-[5′,6′:1,2][60]fullerene adducts 12a-f were found to be in the range of 13.5-14.8 kcal/mol. Unexpectedly, one of the monoadduct 12a was found to be labile when kept in air under ambient light. Two new products 15 (a sulfine-enone) and 16 (an endione) were isolated from the decomposed 12a and were found to derive from self-sensitized singlet oxygen reaction on the 2,5-dimethylthieno moiety of 12a.     

New receptors for anions in water: Synthesis, characterization, X-ray structures of new derivatives of 5,11,17,23-tetraamino-25,26,27,28-tetrapropyloxycalix[4]arene

Syntheses and characterization of ten new compounds from the calixarene family, cone - 5,11,17,23- tetrakis(2-pyridylmethylamino)-25,26,27,28-tetrapropyloxycalix[4]arene 4a; cone - 5,11,17,23-tetrakis(3-pyridylmethylamino)-25,26,27,28-tetrapropyloxycalix[4]arene 4b; cone - 5,11,17,23-tetrakis(4-pyridylmethylamino)-25,26,27,28-tetrapropyloxycalix[4]arene 4c; cone - 5,11,17,23-tetrakis(ferrocenylmethylamino)-25,26,27,28-tetrapropyloxycalix[4]arene 4d; cone - 5,11,17,23-tetrakis(2-pyridylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3a; cone - 5,11,17,23-tetrakis(3-pyridylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3b; cone - 5,11,17,23-tetrakis(4-pyridylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3c; cone - 5,11,17,23-tetrakis(ferrocenylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3d; cone - 5,11,17,23-tetrakis(2-thienylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3e and cone - 5,11,17,23-tetrakis(2-pyrrolylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3f are reported. The target compounds 4a-4d were designed to form complexes with anions based on hydrogen bonds and electrostatic interactions in acidic aqueous solutions and the interaction constant 1770 mol⁻¹ dm³ of a 1:1 complex was obtained for the interaction of 4c with sulfate anion in 5 × 10⁻³ M aqueous HCl. The solid state structures of the compounds 3b, 3e and 3f were determined, their stereochemistry and the stereochemistry of the calix[4]arene frame is generally discussed. Raman, infrared and UV-vis spectra of the target compounds and some intermediates are reported, too.     

Reactivity and electrochemical behavior of ruthenium dithiolene complexes with coordinatively unsaturated metal centers: cycloaddition and dimerization reactions

The novel ruthenium dithiolene complexes [(arene)Ru{S₂C₂(COOMe)₂}] (arene = C₆H₆ (1a), C₆H₄(Me)(iPr) (1b), C₆Me₆ (1c)) were synthesized. The equilibrium between complex 1a and the corresponding dimer [(C₆H₆)Ru{S₂C₂(COOMe)₂}]₂ (1a′) was confirmed in solution. The reaction of complex 1a with dimethyl- or diethylacetylene dicaboxylate gave the alkene-bridged adducts [(C₆H₆)Ru{S₂C₂(COOMe)₂}{C₂(COOR)₂}] (R = Me (2a), Et (3a)) as [2 + 2] cycloaddition products formally. The reactions of complex 1a with diazo compounds also gave the alkylidene-bridged adducts [(C₆H₆)Ru{S₂C₂(COOMe)₂}(CHR)] (R = H (4a), SiMe₃ (5a), COOEt (6a)) as [2 + 1] cycloaddition products. The electrochemical behavior of complex 1a was investigated. The reductant of complex 1a was a stable species for several minutes. The oxidant of complex 1a was very unstable; the cation 1a⁺ formed was immediately converted to the corresponding cationic dimer 1a′⁺. The cationic dimer 1a′⁺ was stable for several minutes, and it was rapidly and quantitatively converted to the neutral complex 1a when it was reduced.     

Synthesis and characterization of the first transition-metal fullerene complexes containing bis(η-benzene)chromium moieties

While photochemical reaction of C₆₀ with an equimolar amount of Mo(CO)₄(η⁶-Ph₂PC₆H₅)₂Cr (1) in toluene at room temperature produced bimetallic Mo/Cr fullerene complex fac/mer-(η²-C₆₀)Mo(CO)₃[(η⁶-Ph₂PC₆H₅)₂Cr] (2) in 87% yield, the thermal reaction of an equimolar mixture of C₆₀, M(dba)₂ (M = Pd, Pt; dba = dibenzylideneacetone) and (η⁶-Ph₂PC₆H₅)₂Cr (3) in toluene at room temperature afforded bimetallic M/Cr fullerene complexes (η²-C₆₀)M[(η⁶-Ph₂PC₆H₅)₂Cr] (4, M = Pd; 5, M = Pt) in 88% and 92% yields, respectively. Products 2, 4 and 5 are the first transition-metal fullerene complexes containing bis(η⁶-benzene)chromium moieties. While 2, 4 and 5 were characterized by elemental analysis and spectroscopy, the crystal molecular structures of 4 along with the starting materials 1 and 3 have been determined by X-ray diffraction techniques.     

Diester intrabridging of p-tert-butylcalix[8]arene and unexpected formation of the monospirodienone derivative

Reaction of p-tert-butylcalix[8]arene 1 with adipoyl chloride in the presence of NaH as the base yielded singly and doubly intrabridged esters 2-4 and 6. Surprisingly, calix[8]arene monospirodienone derivative 7 was also isolated, which was originated by O₂ oxidation. The conditions of this oxidation were optimized leading to a novel synthetic approach to calixarene monospirodienones based on the O₂/NaH/acyl-chloride oxidizing system. Xantheno calix[8]arenes 8-8a were obtained by rearrangement of 7.     

Complexation thermodynamics of water-soluble calix[4]arene derivatives with lanthanoid(III) nitrates in acidic aqueous solution

Microcalorimetric titrations have been performed in acidic aqueous solution at 25 °C to calculate the complex stability constants (K_S) and thermodynamic parameters (ΔG°, ΔH°, and TΔS°) for the stoichiometric 1:1 complexation of lanthanoid(III) nitrates (La-Gd, Tb) with 5,11,17,23-tetrasulfonato-25,26,27,28-tetrakis(hydroxycarbonylmethoxy)calix[4]arene (2) and 5,11,17,23-tetrasulfonato-thiacalix[4]arene (3). Using the present and previous reported data on water-soluble calix[4]arenesulfonates (1) and structurally related analogues 2 and 3, the complexation behavior is discussed comparatively from the thermodynamic point of view. Possessing four carboxyls at the lower rim of parent calix[4]arenesulfonate (1), the derivative 2 displays the enhanced binding abilities for Sm³⁺. As compared with 1 and 2, p-sulfonatothiacalix[4]arene (3) gives not only the lower binding constants for all of lanthanoid(III) ions but also lower cations selectivity. Thermodynamically, the resulting complexes of lanthanoid(III) ions with 1 and its derivatives 2 and 3 is absolutely entropy-driven in aqueous solution, typically showing larger positive entropy changes. These larger positive entropy changes (TΔS°) and somewhat smaller positive enthalpy changes (ΔH°) are directly contributed to the complexes stability as a compensative consequence.     

Positive allosteric binding behavior of pyrene-appended triazole-modified thiacalix[4]arene-based fluorescent receptors

The novel heteroditopic receptors 5_a∼c have been synthesized, which bear a thiacalix[4]arene in the 1,3-alternate conformation. Two urea moieties possessing various aryl groups with either electron-donating or -withdrawing groups at their p-positions function as anion-binding sites. At the opposite side of the cavity are two pyrene-appended triazole rings, which act as cation-binding sites. The binding property of receptor 5_c was investigated by means of ¹H NMR and UV–vis spectroscopy and by fluorescence titration experiments in the presence of various transition metal cations and anions in CH₂Cl₂–DMSO (10:1, v/v) solution. Interestingly, it was found that receptor 5_c possessing two p-nitrophenyl ureido moieties, most efficiently complexes in the urea cavity or bistriazoles; the plausible allosteric effect of receptor 5_c was also investigated.     

Polymer-supported calix[4]arenes for sensing and conversion of NO2/N2O4

The use of simple calix[4]arenes 1a,b for NO₂/N₂O₄ sensing and conversion is demonstrated, both in solution and in the solid state. Upon reacting with these gases, compounds 1a,b encapsulate reactive NO⁺ cations within their cavities with the formation of deeply colored (λ_max∼570 nm) charge-transfer complexes 2a,b. Further functionalization of the calix[4]arene platform is reported for attachment to solid supports. Polymer-supported calixarene material 3 was prepared, which reversibly traps NO₂/N₂O₄ with the formation of nitrosonium storing polymer 4. Material 4 was effectively used for nitrosation of amides.     

Novel phosphite palladium complexes and their application in C-P cross-coupling reactions

A mono- and a 1,3-bis-phosphite arene ligand based on 2,2′-biphenol have been synthesized in order to study the synthesis of the corresponding palladium(II) complexes starting from different Pd precursors. Novel bis-phosphite palladium complex 1 [PdCl₂(L)₂] (L = dibenzo[d,f][1,3,2]dioxaphosphepin, 6-phenoxy), C,P-chelate bonded monophosphite palladium complex 2 [Pd(κ₂-L)(μ-Cl)]₂, and PCP-pincer palladium complex 3 have been prepared from these ligands in promising to excellent yields (50-95%). Additionally, complexes 1 and 3 have been characterized by X-ray crystal structure determinations. The application of 2,6-bis-phosphite pincer palladium(II) complex 3 in C-P cross-coupling between diphenylphosphine-borane and a wide range of various aryl iodides under very mild conditions is reported. Kinetic investigations indicate that 3 merely acts as a pre-catalyst and that Pd nanoparticles are the actual catalytically active species.