A practical synthesis of highly functionalized aryl nitriles through cyanation of aryl bromides employing heterogeneous Pd/C: in quest of an industrially viable process

Preparation of aryl nitrile 2a through classical Rosenmund-von Braun reaction of aryl bromide 1a resulted in a poor yield (61%) due to a high reaction temperature (165 °C) and a lack of efficient procedure for separating 2a from a large quantity of heavy metal waste (Cu salts). To address these issues, a practical synthesis of multifunctional aryl nitriles through cyanation of aryl bromides has been developed with heterogeneous Pd/C used as the catalyst. Treatment of aryl bromides 1 with Zn(CN)₂ in the presence of Pd/C, Zn, ZnBr₂ and PPh₃ in DMA provided aryl nitriles 2 involving those carrying sterically demanding electron-rich substituent in good yields and in highly reproducible manner. The activity of Pd/C is highly dependent on the properties of the Pd/C. Oxidic thickshell type catalyst Pd/C D5 was found to furnish the highest rate acceleration and yield. The use of heterogeneous Pd/C might anchor and disperse Pd over the solid support of the catalyst, at least in the initial stage of the reaction, to assure the formation of monomeric Pd complex without precipitating to inactive Pd black. The use of a slightly excess of Zn(CN)₂ (0.6 equiv) and air oxidation of phosphine ligand, after end of the reaction, converted Pd species to insoluble phosphine-free Pd cyanides, from which Pd was recovered in high yield through simple filtration followed by usual recovery process involving combustion.     

One-pot Negishi cross-coupling reactions of in situ generated zinc reagents with aryl chlorides, bromides, and triflates

In situ generated aryl, heteroaryl, alkyl, or benzylic polyfunctional zinc reagents obtained by the addition of zinc and LiCl to the corresponding organic iodides undergo smooth Pd(0)-catalyzed cross-coupling reactions with aryl bromides, chlorides, and triflates in the presence of PEPPSI as a catalyst. This procedure avoids the manipulation of water and air-sensitive organozinc reagents and produces cross-coupling products in high yields.     

Palladium-catalyzed alpha-arylation of esters and amides under more neutral conditions

Two procedures for the alpha-arylation of carbonyl compounds under conditions that are more neutral than those of reactions of aryl halides with alkali metal enolates are reported. The first procedure rests upon the development of catalysts bearing the hindered pentaphenylferrocenyl di-tert-butylphosphine (Q-phos) and the highly reactive dimeric Pd(I) complex {P(t-Bu)3]PdBr}2. By this procedure, zinc enolates prepared from alpha-bromo esters and amides react with aryl halides to form alpha-aryl esters and amides in high yields under mild conditions with 1-2 mol % catalyst and with remarkable functional group tolerance. By the second procedure, silyl ketene and silyl ketimine acetals react with aryl bromides in the presence of substoichiometric zinc fluoride, 1 mol % Pd(dba)2, and 2 mol % P(t-Bu)3 in DMF solvent at 80 degrees C. Reactions of zinc tert-butyl acetate and propionate enolates and trimethylsilyl ketene acetals of tert-butyl propionate and methyl isobutyrate with aryl bromides bearing electron-donating and potentially reactive, base-sensitive electron-withdrawing groups and with pyridyl bromides are reported. In addition, the diastereoselective coupling of phenyl bromide with an imide enolate bearing the Evans auxiliary is reported, and this study shows that racemization of base-sensitive stereocenters does not occur during the coupling process under these more neutral conditions.     

Direct synthesis of 4-arylpiperidines via palladium/copper(I)-cocatalyzed Negishi coupling of a 4-piperidylzinc iodide with aromatic halides and triflates

A general procedure for the synthesis of 4-arylpiperidines via the coupling of 4-(N-BOC-piperidyl)zinc iodide with aryl halides and triflates is presented. The reaction requires cocatalysis with both Cl(2)Pd(dppf) and a copper(I) species. An improved, safer procedure for the activation of zinc dust is also presented.     

Facile synthesis of symmetrical functionalized biaryls from aryl halides catalyzed by commercial zinc dust using ammonium formate

Reductive homocoupling of aryl halides in the presence of commercial zinc dust and ammonium formate in methanol produces biaryls in good to excellent yields. Aryl halides having either electron-donating or electron-withdrawing groups underwent smooth coupling to afford the corresponding symmetrical biaryls. Addition of 1 equiv of sodium hydroxide enhanced the coupling reaction rate. Commercial zinc dust is inexpensive, widely available and can be used without any auxiliary catalysts such as Pd(0) and/or Ni(0).     

A New Route to 6-Aryl-substituted 3,4-Dihydronaphthalene Derivatives via Pd (O)-Catalyzed Cross-Coupling Reaction of Aryl Zinc Chlorides with an Aryl Triflate

A procedure for the Pd (O)-catalyzed cross coupling of the triflate of 6-hydroxy-3,4-dihydronaphthalene-2-methylcarboxylate with various aryl zinc chlorides was developed, which represents an efficient approach to 6-aryl-substituted naphthalene derivatives.     

Ammonium Chloride Promoted Palladium-Catalyzed Ullmann Coupling of Aryl Bromide

The Ullmann coupling reaction is one of the most useful methods for the synthesis of symmetrical biaryls. It is usually carried out with copper as a reagent.1 However, it generally requires more than a stoichiomet-ric amount of copper and high reaction temperature. In recent years, various reagents, especially combination of the transition metal with reducing reagents,2-6 were proposed to overcome these problems. For example, Li and co-workers2a,2b have reported the Pd/C and zinc-mediated Ul…     

CO2 as Both a Selective Agent and Reaction Media in Palla-dium-Catalyzed Reductive Ullmann-Type Coupling Reaction

Carbon dioxide as both a selective agent and reaction media in the palladium-catalyzed Ullmann-type coupling has been described. The results showed that aryl chlorides could be easily activated in the presence of carbon dioxide and the chemoselectivity shifted toward the palladium-catalyzed Ullmann-type coupling reaction. In liquid carbon dioxide, homocoupling reactions of aryl halides, including less reactive aryl chlorides, were carried out smoothly in moderate to good yields using Pd/C, zinc, and H2O as the catalytic system at room temperature.     

New efficient approach to 2,2-diaryl-1,1-difluoro-1-alkenes and 1,1-difluoro-2-aryl-1,3-dienes via Suzuki coupling of alpha-halo-beta,beta-difluorostyrenes

[reaction: see text] Alpha-halo-beta,beta-difluorostyrenes [ArCX = CF2; X = Br, I; Ar = aryl, heteroaryl; synthesized by the Pd(0)-catalyzed coupling reaction of the corresponding alpha-halo-beta,beta-difluoroethenylzinc reagents (CF2=CXZnCl, X = Br, I) with aryl iodides] were functionalized at the halogen site with arylboronic acids under Pd(0)-catalyzed Suzuki-Miyaura coupling reaction conditions to obtain 2,2-diaryl-1,1-difluoro-1-alkenes (ArAr'C=CF2, Ar' = aryl, heteroaryl) in 51-91% isolated yield. The corresponding reaction with alkenylboronic acids produced 1,1-difluoro-2-aryl-1,3-dienes in 53-80% isolated yield. Alternatively, 2,2-disubstituted-1,1-difluoro-1-alkenes were synthesized in moderate yield by a zinc-insertion reaction at the halogen site of the alpha-halo-beta,beta-difluorostyrenes, followed by Pd(0)-catalyzed cross-coupling of the zinc reagent with aryl or alkenyl iodides.     

Ammonium Chloride Promoted Palladium-Catalyzed UIImann Coupling of Aryl Bromide

In water, ammonium chloride was found to promote palladium-catalyzed Ullmann coupling reactions of aryl bromides. In the presence of Pd/C, zinc, NH4Cl, and water, coupling of various aryl bromides was carried out smoothly to afford the corresponding homocoupling products in moderate yields.     

Efficient Stille cross-coupling reaction catalyzed by the Pd(OAc)2/Dabco catalytic system

[reaction: see text] An efficient Pd(OAc)2/Dabco-catalyzed Stille cross-coupling reaction procedure has been developed. In the presence of Pd(OAc)2 and Dabco (triethylenediamine), various aryl halides including aryl iodides, aryl bromides, and activated aryl chlorides were coupled efficiently with organotin compounds to afford the corresponding biaryls, alkene, and alkynes in good to excellent yields. Furthermore, high TONs [turnover numbers, up to 980,000 TONs for the coupling reaction of 1-bromo-4-nitrobenzene and furan-2-yltributyltin] for the Stille cross-coupling reaction were observed.     

Unsymmetrical diaryl sulfones and aryl vinyl sulfones through palladium-catalyzed coupling of aryl and vinyl halides or triflates with sulfinic acid salts

The palladium-catalyzed reaction of sulfinic acid salts with a wide variety of aryl and vinyl halides or triflates provides unsymmetrical diaryl sulfones and aryl vinyl sulfones in good to excellent yields. The reaction is strongly influenced by the presence of nBu4NCl, and the use of Xantphos, a rigid bidentate ligand with a wide natural bite angle, was found to be crucial for the success of the reaction. With neutral, electron-rich, and electron-poor aryl iodides best results were obtained by using Pd2(dba)3, Xantphos, Cs2CO3, and nBu4NCl, in toluene at 80 degrees C. Two general procedures were employed with aryl bromides and triflates: sodium p-toluenesulfinate, Pd2(dba)3, Xantphos, Cs2CO3, 120 degrees C, in toluene with nBu4NCl (procedure A: neutral, electron-rich, and slightly electron-poor aryl bromides or triflates) and without nBu4NCl (procedure B: electron-poor aryl bromides or triflates). With vinyl triflates best results were obtained at 60 degrees C omitting nBu4NCl.     

Straightforward Synthesis of 2‐Aryl‐1‐alkynylphosphonates and Arylpropiolates

A protocol for the direct cross coupling of trialkylsilyl‐alkynes bearing electron‐withdrawing groups and aryl halides using a Pd/Ag catalytic system is described. The procedure allows the straightforward synthesis of a variety of alkynylphosphonates and aryl propiolates derivatives in good yields.     

New role of CO2 as a selective agent in palladium-catalyzed reductive Ullmann coupling with zinc in water

Carbon dioxide was found to promote the palladium-catalyzed zinc-mediated reductive Ullmann coupling of aryl halides. In the presence of carbon dioxide, Pd/C, and zinc, various aromatic halides including less reactive aromatic chlorides were coupled to give the corresponding homocoupling products in good yields.     

Pd(0)-Mediated Cross-Coupling of Reformatsky Reagents with Vinyl and Aryl Triflates

Pd(0)-Mediated cross-coupling reaction between Reformatsky reagents and vinyl/aryl trifla tes is reported. The method represents a procedure for the synthesis of β - γ unsaturated esters and aryl acetic esters.     

Palladium- and nickel-catalyzed cross-couplings of unsaturated halides bearing relatively acidic protons with organozinc reagents

A wide range of polyfunctional aryl, heteroaryl, alkyl, and benzylic zinc reagents were coupled with unsaturated aryl halides bearing an acidic NH or OH proton, using Pd(OAc)2 (1 mol %) and S-Phos (2 mol %) as catalyst without the need of protecting groups. A similar nickel-catalyzed reaction is described. The relative kinetic basicity of organozinc compounds as well as their stability toward acidic protons is also described.     

Self-assembled poly(imidazole-palladium): highly active, reusable catalyst at parts per million to parts per billion levels

Metalloenzymes are essential proteins with vital activity that promote high-efficiency enzymatic reactions. To ensure catalytic activity, stability, and reusability for safe, nontoxic, sustainable chemistry, and green organic synthesis, it is important to develop metalloenzyme-inspired polymer-supported metal catalysts. Here, we present a highly active, reusable, self-assembled catalyst of poly(imidazole-acrylamide) and palladium species inspired by metalloenzymes and apply our convolution methodology to the preparation of polymeric metal catalysts. Thus, a metalloenzyme-inspired polymeric imidazole Pd catalyst (MEPI-Pd) was readily prepared by the coordinative convolution of (NH(4))(2)PdCl(4) and poly[(N-vinylimidazole)-co-(N-isopropylacrylamide)(5)] in a methanol-water solution at 80 °C for 30 min. SEM observation revealed that MEPI-Pd has a globular-aggregated, self-assembled structure. TEM observation and XPS and EDX analyses indicated that PdCl(2) and Pd(0) nanoparticles were uniformly dispersed in MEPI-Pd. MEPI-Pd was utilized for the allylic arylation/alkenylation/vinylation of allylic esters and carbonates with aryl/alkenylboronic acids, vinylboronic acid esters, and tetraaryl borates. Even 0.8-40 mol ppm Pd of MEPI-Pd efficiently promoted allylic arylation/alkenylation/vinylation in alcohol and/or water with a catalytic turnover number (TON) of 20,000-1,250,000. Furthermore, MEPI-Pd efficiently promoted the Suzuki-Miyaura reaction of a variety of inactivated aryl chlorides as well as aryl bromides and iodides in water with a TON of up to 3,570,000. MEPI-Pd was reused for the allylic arylation and Suzuki-Miyaura reaction of an aryl chloride without loss of catalytic activity.     

Negishi cross-couplings of unsaturated halides bearing relatively acidic hydrogen atoms with organozinc reagents

A wide range of polyfunctional aryl, heteroaryl, alkyl, and benzylic zinc reagents were coupled with unsaturated halides bearing an acidic NH or OH function, using Pd(OAc)(2) (1 mol %) and S-Phos (2 mol %) as catalyst without the need of protecting groups.     

In situ trapping of Boc-2-pyrrolidinylmethylzinc iodide with aryl iodides: direct synthesis of 2-benzylpyrrolidines

Addition of (S)-(+)-tert-butyl 2-(iodomethyl)pyrrolidine-1-carboxylate to activated zinc, aryl halides, and a catalyst derived from Pd(2)(dba)(3) (2.5 mol %) and SPhos (5 mol %) in DMF allows trapping of the corresponding organozinc reagent, with formation of Boc-protected 2-benzylpyrrolidines (20-72%).     

Aryl transfer between Pd(II) centers or Pd(IV) intermediates in Pd-catalyzed domino reactions

A computational study has been performed to determine the mechanism of the key steps of Pd-catalyzed domino reactions in which C(sp2)-C(sp2) are formed from aryl and alkenyl halides. DFT calculations were done on model complexes of the proposed intermediates, with PH3 and H2O as ancillary ligands, to explore two possible mechanisms: the oxidative addition of aryl or alkenyl halides to palladacycles to give Pd(IV) intermediates, and the transmetalation-type reaction of aryl or alkenyl ligands between two Pd(II) centers, a palladacycle, and a Pd(II) complex formed by oxidative addition of aryl or alkenyl halides to Pd0. We have shown that oxidative addition of iodoethylene to Pd0 precursors is more favorable than oxidative addition to Pd(II) palladacycles, whereas transmetalation-type reactions between Pd(II) complexes are facile. Similar results were obtained with iodobenzene instead of iodoethylene and formamide as the ancillary ligand. These results suggest that Pd(IV) intermediates are not involved in these reactions.