Les fluoronitrures de terres rares

The reaction of rare-earth nitrides with fluorides or the pyrolysis of these fluorides in gaseous ammonia atmosphere leads, in the case of lanthanum, cerium, and gadolinium, to nitride fluorides of general formula LnN_xF_3?3x. They crystallize with a fluorite-type structure which can be described in a consistent manner in terms of a Willis model. The magnetic properties of Gd₃NF₆ have been studied.     

On the dichotomy of the SN2/ET reaction pathways: an apparent SN2 reactivity in the reaction of naphthalene dianion with alkyl fluorides

Dilithium naphthalene (Li₂C₁₀H₈) displays a S_N2 reactivity profile in its reaction with alkyl fluorides (n-, s- and t-octyl fluoride). S_N2 seems to be the dominant mechanism operating with primary alkyl fluorides, which presumably turns into competition with ET as we move to secondary and tertiary alkyl fluorides. Significantly, lithium naphthalene (LiC₁₀H₈) seems to have also an important nucleophilic component when reacting with alkyl fluorides, in contrast to the previously proposed general ET process valid for all alkyl halides. These results explain the observed distribution of products and are reinforced by a complete analysis of the products originated by the reaction with 6-halohexenyl radical probes, whose main alkylation products are described here for the first time.     

The dissociation energy of ionic molecules; Selected oxides and fluorides: LiO,LiF, BeO,BeF, MgF,CaF and SrF

The dissociation energies, D₀, of several oxides and fluorides have been computed using a technique that has been shown to yield very accurate D₀ for ionic molecules. The theoretical values are LiO(3.84 eV), LiF(6.09). BeO(4.56). BeF(5.91), MgF(4.67). CaF(5.46), and SrF(5.50). These are in excellent agreement with experiment, except for LiO where our value is about 0.35 eV larger.     

Vibrational analysis of n-butyl, n-pentyl,and n-hexyl fluorides

Infrared spectra were obtained for n-butyl, n-pentyl, and n-hexyl fluorides in the liquid and solid states, and liquid-state Raman spectra were obtained for the first two of these. Normal coordinate calculations were carried out and twenty force constants of the C-CH₂F group were refined to provide the best fit for the 114 assigned frequencies of trans-n-propyl, gauche-n-propyl, TT-n-butyl, and TG-n-butyl fluorides. The resulting force constants were used to calculate the frequencies of the GT- and GG conformations of n-butyl fluoride and the two conformations for each of n-pentyl and n-hexyl fluoride that have coplanar carbon chains. The presence of all four conformers of n-butyl fluoride in the liquid state is indicated, but only the TG-conformer is present in the solid. The existence of the two conformations of n-pentyl and n-hexyl fluorides for which calculations were made is supported by comparison of the observed and calculated frequencies. Additional conformations seem to be present. The simplest solid-state spectrum is due only to the conformer that has a coplanar chain of carbons and the fluorine atom in the gauche position. Previous tentative conclusions about the relation between C-F stretching frequency and configuration have been revised.     

Relations structurales entre U3O8 et quelques fluorures mixtes de formules M2M′3F11, MM′2F7 et MM′3F10

U₃O₈ oxide, as well as M₂M′₃F₁₁, MM′₂F₇ and MM′₃F₁₀ fluorides, with M = Rb, Tl, Cs, NH₄ and M′ = In, Lu, Yb, Tm, is described as the regular repetition according to the … A-A-A … sequence of identical and parallel sheets of edge-and corner-sharing M′F₇ or UO₇ pentagonal bipyramids and M′F₆ octahedra. M′ and U atoms are systematically located at the lattice points of a pseudohexagonal network, but in the fluorides some of these lattice points are vacant, producing hexagonal tunnels in which M atoms are located. It is shown that in the two kinds of compounds the same linear chains and M′₃X₁₇ groups of pentagonal bipyramids are present, and that the transformation of the U₃O₈ structure into the fluorides can be achieved by an ordered substitution of some linear … UOUO … chains by … M-M-M … chains. All these structures can be described with the same structural model based on the chemical twinning principle.     

Fluorodiazadiphosphetidine, 12. Mitt.: Reaktionen von Oktafluoro-1,3,2λ6,4λ6-diazoniadiphosphatetidinen

Reaction of (CH₃NHPF₄)₂ with selected organometallic reagents yields (CH₃NPF₃)₂, while reaction with non-nucleophilic bases such as 1,4-diazabicyclo[2.2.2]octane (DABCO) or 1,8-Bis(dimethylamino)naphthalin and with alkali fluorides yields ionic compounds with the diazoniadiphosphatetidine ring as a dianion.     

One-pot synthesis of 1-aryl-3-methyl-1,3-dienes using methallyl(trimethyl)silane and aldehydes and their low temperature (Z)→(E) isomerization induced by sulfur dioxide

2-Methylprop-2-ene-1-sulfonyl fluorides can be easily prepared via the ene reaction of methallylsilanes and SO₂. In the presence of a base, aldehydes and 2-methylprop-2-ene-1-sulfonyl fluorides give 1,3-(E) and (Z)-dienes. Their (Z)→(E) isomerization by classical means fails or leads to their polymerization. It is shown that SO₂ can isomerize 1-aryl-3-methyl-1,3-dienes at low temperature, without formation of sulfolenes (cheletropic addition/elimination). Preliminary mechanistic studies suggest that SO₂ adds to 1,3-dienes forming 1,4-diradical intermediates that are responsible for the (Z)→(E) isomerizations.     

The first example of fluoro-Meinwald rearrangement

Novel fluorinated norbornadienes were synthesized in up to 95% yield by the base-induced elimination of HNO₂ from 5-fluoro-5-nitro-6-arylbicyclo[2.2.1]hept-2-enes prepared, in turn, by the Diels–Alder reaction of β-fluoro-β-nitrostyrenes with cyclopentadiene. The subsequent epoxidation initiated the Meinwald type rearrangement affording 6-aryl-bicyclo[3.1.0]hex-2-ene-6-carboxylic acid fluorides as individual (1SR,5RS,6RS)-diastereomers. The transformation is the first example of fluoro-Meinwald rearrangement to form the corresponding acyl fluorides.     

A new method for making acyl fluorides using BrF3

While many carboxylic acids could be converted directly to acyl fluorides by using BrF₃, the reaction with acyl chlorides was found to be of a more general nature and yields better results. Surprisingly, reacting t-butyl esters with bromine trifluoride also resulted in acyl fluorides in reasonable yields. The reactions were completed in a few seconds at 0 °C.     

The reaction of biphenyl radical anion and dianion with alkyl fluorides. From ET to SN2 reaction pathways and synthetic applications

The reaction of dilithium biphenyl (Li₂C₁₂H₁₀) with alkyl fluorides has been studied from the point of view of the distribution of products. Two main reaction pathways, the nucleophilic substitution (S_N2) and the electron transfer (ET), can compete to yield the same alkylation products in what is known as the S_N2-ET dichotomy. S_N2 seems to be the main mechanism operating with primary alkyl fluorides (n-RF). Alkylation proceeds in good yields, and the resulting alkylated dihydrobiphenyl anion (n-RC₁₂H₁₀Li) can be trapped with a second conventional electrophile (E⁺) affording synthetically interesting dearomatized biphenyl derivatives (n-RC₁₂H₁₀E). The reaction gives a higher amount of ET products as we move to secondary (s-RF) and to tertiary alkyl fluorides (t-RF), in which case the mechanism seems to be dominated by ET. In this case, alkylation by radical coupling is still feasible, giving access to the synthesis of t-RC₁₂H₁₀E, although in lower yields. A rational interpretation of this S_N2-ET dichotomy is given on the basis of the full distribution of products observed when 5-hexenyl fluoride and 1,1-dimethyl-5-hexenyl fluoride were are used as radical probes in their reaction with Li₂C₁₂H₁₀ and LiC₁₂H₁₀.     

Structural studies of magnesium nitride fluorides by powder neutron diffraction

Samples of ternary nitride fluorides, Mg₃NF₃ and Mg₂NF have been prepared by solid state reaction of Mg₃N₂ and MgF₂ at 1323–1423 K and investigated by powder X-ray and powder neutron diffraction techniques. Mg₃NF₃ is cubic (space group: Pm3m) and has a structure related to rock-salt MgO, but with one cation site vacant. Mg₂NF is tetragonal (space group: I4₁/amd) and has an anti-LiFeO₂ related structure. Both compounds are essentially ionic and form structures in which nitride and fluoride anions are crystallographically ordered. The nitride fluorides show temperature independent paramagnetic behaviour between 5 and 300 K.     

Direct,oxidative halogenation of diaryl- or dialkylphosphine oxides with (dihaloiodo)arenes

The oxidative halogenation of diaryl- or dialkylphosphine oxides with the hypervalent iodine reagents (difluoroiodo)toluene (p-TolIF₂, 1) and (dichloroiodo)benzene (PhICl₂, 2) is reported. Phosphoric fluorides could be recovered in 32–75% yield, or they could be trapped with EtOH to give the corresponding phosphinate in typically good yield. Phosphoric chlorides were not readily isolable, and were trapped with alcohol and amine nucleophiles, giving diaryl- or dialkylphos-phinates and phosphinamides in up to 90% yield.     

Preparation of sulfonamides from N-silylamines

Sulfonamides have been prepared in high yields by the reactions of N-silylamines with sulfonyl chlorides and fluorides. In a competition experiment, the sulfonyl chlorides were found to be far more reactive than sulfonyl fluorides. The chemistry may be used to prepare aliphatic, aromatic, tertiary, secondary, and primary sulfonamides. It may also be done in the absence of solvent and the byproduct trimethylsilyl chloride recovered in good yield. Primary sulfonamides were synthesized from the sulfonyl chloride with aminotriphenyl silane (Ph₃SiNH₂), a conversion demonstrated with the synthesis of the carbonic anhydrase inhibitor, acetazolamide.     

Microwave dielectric properties of aqueous solutions of potassium and cesium fluorides

The microwave dielectric properties of aqueous solutions of potassium and cesium fluorides are studied over a wide concentration range at frequencies of 13 to 25 GHz and temperatures of 288, 298, and 308 K. The static dielectric constant ?_s and the time τ and enthalpy of activation ΔH _? ⁺⁺ of dielectric relaxation for the solutions are calculated. It is demonstrated that, for fluorides, the disruptive effect of ions on the hydrogen bond network of water is weaker than that for the other halogenides.     

Mechanochemical synthesis,structure and properties of lead containing alkaline earth metal fluoride solid solutions MxPb1-xF2 (M = Ca,Sr, Ba)

The paper deals with the mechanochemical synthesis of lead containing alkaline earth metal fluoride solid solutions M_xPb_1-xF₂ (M = Ca, Sr, Ba) by high-energy ball milling. Several metal precursors and fluorinating agents were tested for synthesizing M_0.5Pb_0.5F₂. Metal acetates and ammonium fluoride as precursors show the most promising results and were therefore used for the formation of M_xPb_1-xF₂ with different metal cationic ratios. The characterization of the local fluorine coordination and the crystal structure was performed by ¹⁹F MAS NMR spectroscopy and X-ray diffraction. Additional calculations of ¹⁹F chemical shifts using the superposition model allow a deeper insight into the local structure of the compounds. The fluoride ion conductivity was followed by temperature dependent DC conductivity measurements. Significantly higher conductivities were found in comparison with those of the corresponding binary fluorides. The highest values were observed for samples with high lead content M_0.25Pb_0.75F₂, bearing in mind the much higher conductivity of PbF₂ compared to MF₂.     

Mechanochemical synthesis,structure, and properties of solid solutions of alkaline earth metal fluorides: Ma1−xMbxF2 (M: Ca,Sr, Ba)

The capability of mechanochemical synthesis for the formation of solid solutions of alkaline earth metal fluorides M^a_1−xM^b_xF₂ (M: Ca, Sr, Ba) was tested by fluorination of metal acetates and metal hydroxides with ammonium fluoride directly at milling. Evidence was found for a mutual substitution of cations on their lattice positions in Ca_1−xSr_xF₂ and Ba_1−xSr_xF₂ samples. For the Ba/Ca-system this synthesis route is only partially successful. X-ray diffraction and ¹⁹F MAS NMR spectroscopy were used to characterize all samples concerning their crystal structure and local fluorine coordination. Calculations of ¹⁹F chemical shifts with the superposition model along with probability calculations for the intensity of the individual ¹⁹F lines, performed in dependence on the molar composition of the samples, perfectly agree with the experimental findings. The fluoride ion conductivity of as-prepared samples, determined by temperature dependent DC conductivity measurements, is significantly higher than those of crystalline binary fluorides. Moreover, a higher F⁻ ion conductivity is observed for samples with higher mixing grade in the Ca/Sr-and the Ba/Sr-systems.     

Etude par effet Mössbauer des composés de type “bronzes fluorés” MxFeF3 (M = K,Rb, Cs,NH4)

The hexagonal, tetragonal and pyrochlore-type nonstoichiometric iron fluorides M_xFeF₃ (M = K, Rb, Cs, NH₄) have been studied by Mössbauer spectroscopy over the temperature range 4.2 to 295 K. The magnetic transition temperatures have been determined. The ferrous and ferric ions remain in discrete oxidation states indicating the absence of charge hopping. The broadened lines of the spectra of the hexagonal and tetragonal phases are consistent with the disordering of Fe²⁺ and Fe³⁺ in the structure. By contrast, the narrow linewidths of the spectra of the pyrochlore-type phases characterize a structural ordering between the ferrous and ferric ions.     

Magnetic behaviour of the MTbF6 fluoroterbates (M=Cd,Ca, Sr, (α/β)-Ba)

Neutron powder diffraction has been performed on the MTbF₆ fluorides (M=Cd, Ca, Sr, (α/β)-Ba). Four of these fluorides (Cd, Ca, Sr, β-Ba) are built of a (pseudo-) tetragonal packing of [TbF₆]^2? chains and only differs by the chains relative orientations. Thus this series represents a valuable opportunity to evaluate the Tb⁴⁺-Tb⁴⁺ magnetic interactions. All the compounds displayed antiferromagnetic order (T_N=2.70 K (Cd), 2.15 K (Ca), 2.60 K (Sr), 2.10 K (β-Ba)), except for the α form of BaTbF₆. The crystal structure of this latter fluoroterbate has also been investigated by means of high-resolution neutron powder diffraction. From Neutron Powder Diffraction data, CdTbF₆ and β-BaTbF₆ magnetic structures were determined, together with the metamagnetic behaviour of β-BaTbF₆ as a function of an external magnetic field. A tentative phase diagram is then given for β-BaTbF₆. Advantage was taken of the polymorphism of the BaTbF₆ fluoroterbate to analyse, on the basis of topological parameters such as bond distances and angles, the magnetic behaviour of its α and β forms. It was shown that superexchange interactions are present in β-BaTbF₆, and that these interactions may also rule the magnetic behaviour of the other MTbF₆ (M=Ca, Sr, Cd) tetravalent terbium fluorides.     

Deoxyfluorination of alcohols using N,N-diethyl-α,α-difluoro-(m-methylbenzyl)amine

Deoxyfluorination of alcohols was carried out using N,N-diethyl-α,α-difluoro-(m-methylbenzyl)amine (DFMBA). Primary alcohols were effectively converted to fluorides under microwave irradiation or conventional heating. Deoxyfluorination of an anomeric hydroxy group in sugars by DFMBA proceeded at below room temperature and glycosyl fluorides could be obtained in good yields. The deoxyfluorination reaction chemoselectively proceeded and various protecting groups on the sugar can survive under the reaction conditions.     

Superionic Conduction in Complex Fluorides of Antimony(III) MnSbxFy (M—Cations of an Alkali Metal, Ammonium, or Thallium, n = 1–3, and x = 1–4)

Methods of ¹⁹F NMR and impedance spectroscopy are used to investigate the internal mobility of fluoride (ammonium) ions and electrophysical characteristics of complex trivalent antimony fluorides MSb₄F₁₃, MSb₃F₁₀, MSb₂F₇, M₂Sb₃F₁₁, M₃Sb₄F₁₅, and MSbF₄ (M is an alkali cation, ammonium, thallium). The ion motion types in the cationic and anionic sublattices of the fluorides are determined at 150–500 K. The polymorphous transformations in the fluorides are usually phase transitions to a superionic state and their high ionic (superionic) conductivity (σ ≥ 10⁻⁴ to 10⁻² S cm⁻¹ at 400 K) is due to the diffusion motion of ions of fluoride, ammonium, and possibly sodium, potassium, and thallium. The high polarizability of thallium ions favors the development of high mobility of fluoride ions in the fluorides.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 560–572.Original Russian Text Copyright © 2005 by Kavun, Uvarov, Slobodyuk, Brovkina, Zemnukhova, Sergienko.