A catalyst system for the formation of amides by reaction of carboxylic acids with blocked isocyanates

A catalyst for the reaction of blocked isocyanates (blocking agent diisopropylamine and dimethyl pyrazole) and carboxylic acids was identified. Magnesium and in some instances calcium salts proved to be highly active as catalyst. This reaction gives amides in quantitative yield and excellent selectivity and is suitable for coating and general chemical purposes.     

A fast method for determining low-molecular-mass aliphatic carboxylic acids by high-performance liquid chromatography-atmospheric pressure chemical ionization mass spectrometry

A fast quantitative high-performance liquid chromatographic separation method with atmospheric pressure chemical ionization mass spectrometric detection (HPLC-APCI-MS) was developed for the determination of low-molecular-mass aliphatic mono- and dicarboxylic acids typically present in different industrial process waters. A mixture of glycolic, lactic, a-glucoisosaccharinic, oxalic, maleic, fumaric, succinic, malic, glutaric, methylsuccinic, and adipic acids was separated using an RP chromatographic system. Adipic acid was used as an internal standard to calculate correlation coefficients for the acids studied. The chromatographic analysis of these acids was primarily carried out by means of gradient elution with an aqueous formic acid solution (0.15%, pH 2.5) and methanol using a modified C18 stationary phase. Good acid separation could be obtained for all acids by optimizing the chromatographic conditions. The method provides a simple sample preparation and faster analysis time compared to the traditional gas chromatographic methods, thus enabling almost real-time monitoring of these acids. Finally, the method developed was applied to the analysis of a complex mixture of aliphatic hydroxy carboxylic acids, which are formed as alkaline degradation products of carbohydrates during wood delignification and are present in the cooking spent liquor (black liquor).     

Use of potassium-form cation-exchange resin as a conductimetric enhancer in ion-exclusion chromatography of aliphatic carboxylic acids

In this study, a cation-exchange resin (CEX) of the K⁺-form, i.e., an enhancer resin, is used as a postcolumn conductimetric enhancer in the ion-exclusion chromatography of aliphatic carboxylic acids. The enhancer resin is filled in the switching valve of an ion chromatograph; this valve is usually used as a suppressor valve in ion-exchange chromatography. An aliphatic carboxylic acid (e.g., CH₃COOH) separated by a weakly acidic CEX column of the H⁺-form converts into that of the K⁺-form (e.g., CH₃COOK) by passing through the enhancer resin. In contrast, the background conductivity decreases because a strong acid (e.g., HNO₃) with a higher conductimetric response in an eluent converts into a salt (e.g., KNO₃) with a lower conductimetric response. Since the pH of the eluent containing the resin enhancer increases from 3.27 to 5.85, the enhancer accelerates the dissociations of analyte acids. Consequently, peak heights and peak areas of aliphatic carboxylic acids (e.g., acetic acid, propionic acid, butyric acid, and valeric acid) with the enhancer resin are 6.3-8.0 times higher and 7.2-9.2 times larger, respectively, than those without the enhancer resin. Calibrations of peak areas for injected analytes are linear in the concentration range of 0.01-1.0 mM. The detection limits (signal-to-noise ratio = 3) range from 0.10 μM to 0.39 μM in this system, as opposed to those in the range of 0.24-7.1 μM in the separation column alone. The developed system is successfully applied to the determination of aliphatic carboxylic acids in a chicken droppings sample.     

A new method for the preparation of carboxyl-labelled aliphatic carboxylic acids

The exchange reaction of carboxyl groups with labelled carbon dioxide has been investigated and shown to provide an excellent method for the preparation of labelled aliphatic carboxylic acids.     

Peculiarities of catalytic behavior of bases in the reaction of aliphatic carboxylic acids with epoxide

A study was carried out on the kinetics of the reaction of 1-chloro-2,3-epoxypropane (epichlorohydrin, ECH) with aliphatic carboxylic acids in the presence of (3-chloro-2-hydroxypropyl)trimethylammonium (CHPTMA) chloride obtained by trimethylammonium chloride and ECH. We compared the catalytic activity of CHPTMA chloride, trialkylamines, and tetraalkylammonium halides and evaluated the effect of their structure. An ab initio quantum-chemical calculation was performed to obtain a detailed analysis of the state of the catalysts in this system in order to understand the peculiarities of catalytic activity of these bases. Translated from Teoreticheskaya i éksperimental'naya Khimiya, Vol. 44, No. 5, pp. 292–297, September–October, 2008.     

Novel route to carboxylic acids via the DCME reaction

Brown's DCME reaction was successfully performed employing B-alkyl-9-oxa-10-borabicyclo[3.3.2]decanes (1) to provide carboxylic acids (2) in good to excellent yields with complete retention of configuration.     

Screening method for the evaluation of asymmetric catalysts for the reduction of aliphatic ketones

ATH reductions of aliphatic ketones in water catalyzed by ruthenium coordinated by prolinamide ligands produce alcohols with moderate enantiomeric excesses in most cases. A set of seven aliphatic ketones is proposed for a rapid evaluation of the enantioselectivity of catalysts by one-pot multi-substrates reduction. The screening of a library of prolinamides shows that according to the structure of the ketones different ligands give the best asymmetric inductions.     

The effects of temperature and mobile phase on the retention of aliphatic carboxylic acids in hydrophilic interaction chromatography on zwitterionic stationary phases

The influence of the mobile phase and temperature, on the retention behavior of seven aliphatic acids (pyruvic, gluconic, 2‐oxoglutaric, tartaric, malic, oxalic, and citric acid) in hydrophilic interaction liquid chromatography on zwitterionic stationary phases with sulfobetaine and phosphorylcholine ligands is investigated. In agreement with the van't Hoff model, most acids show linear ln k versus 1/T plots. However, the retention of structurally symmetrical oxalic and tartaric dicarboxylic acids is almost independent of temperature, or slightly increases at rising temperature. The experimental parameters of the van't Hoff plots suggest positive entropic contributions to the retention of these symmetrical acids, possibly connected with changes in molecular symmetry on their adsorption. The type of the zwitterionic stationary phase and the mobile phase composition (the molar concentration of acetate buffer and the volume fraction of acetonitrile) affect the retention and the selectivity of the separation of the acids.     

Application of flow-injection potentiometric system for determination of total concentration of aliphatic carboxylic acids

In this work, flow-injection system with potentiometric detection was tested for determination of total carboxylic acid concentration. Detection part of the examined system consists of ion-selective electrodes (ISEs) with polymer membranes of different compositions. First electrode is based on Zr(IV)-tetraphenylporphyrin as ionophore selective towards carboxylic acid anions, the membrane of second one contains only liphophilic anion exchanger - tridodecylmethylammonium chloride. Final response of the system is a result of combination of EMF signals from both electrodes. Combination of two detectors enables significant decrease of differences between potentiometric signals induced by mixtures of studied anions of various concentrations as compared to results obtained only with metalloporphyrin-based ISE. The use of anion-exchanger based detector allows for elimination of the influence of aliphatic carboxylic acids lipophilicity.Proposed potentiometric flow-injection system was employed for determination of short-chain aliphatic carboxylic acids (so-called VFA - volatile fatty acids) in samples originating from an anaerobic digester. Results obtained for these relatively complicated samples are in good agreement with results obtained with the use of reference colorimetric method.Linear response towards carboxylic acids was observed in the concentration range of 10⁻⁴ to 10⁻² mol dm⁻³, with the slopes in the range of −110 to −150 mV dec⁻¹ (for acetate⁻ and butyrate⁻, respectively). System enables for determination of about 6 samples per hour. Life time of ISEs average about 2 months.     

The condensation reaction between isocyanates and carboxylic acids. A practical synthesis of substituted amides and anilides.

Addition of a carboxylic acid to an isocyanate initially yields the mixed acid anhydride, decarboxylation of which leads to the N-substituted amide. The conversion of acid into amide was shown to proceed similarly for both aliphatic and aromatic carboxylic acids with a range of substituted isocyanates.     

Reaction of amidines of aliphatic carboxylic acids with dimethyl acetylenedicarboxylate

It was established that dimethyl acetylenedicarboxylate reacts with acetamidine to give methyl 4-hydroxy-2-methylpyrimidine-6-carboxylate, with formamide to give a linear addition product, and with trichloroacetamide to give cyclic and linear reaction products. The structures of the products were proved by alternative synthesis and the IR and mass spectra.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 831–833, June, 1977.     

Selective preparation of terminal alkenes from aliphatic carboxylic acids by a palladium-catalysed decarbonylation-elimination reaction

Trialkylamines were used as additives in the decarbonylation-elimination reaction catalysed by the combination of palladium(II) chloride and DPE-Phos. Aliphatic carboxylic acids were transformed at relatively low temperature into terminal alkenes in high yield and high selectivity, without the need for distillation, thereby avoiding isomerisation.     

Kinetics and thermodynamics of the blocking reaction of several aliphatic isocyanates

The oxime-blocking reaction of several aliphatic isocyanates, such as 1,6-Hexane diisocyanate (HDI), isophorone diisocyanate (IPDI), and dicyclohexylmethane-4,4′-diisocyanate (H₁₂MDI), is investigated. The reaction is carried on in various solvents that are divided into two categories: aromatic solvents and oxygen-contained solvents. In situ FT-IR is used to monitor the reaction and show the large difference of solvent and the structure of isocyanate. Kinetic studies indicate that the reaction rate appears faster in aromatic solvents although the polarity of aromatic solvents is lower. Then, thermodynamic parameters of the blocking reaction, such as activation energy (E_a), enthalpy (ΔH*) and entropy (ΔS*), are determined from the Arrhenius and Eyring equations. It is found that activation energy in aromatic solvents is higher, but the reaction rate is much faster, all of which are discussed corresponding to the reaction mechanism.     

Application of dimeric orthopalladate complex of homoveratrylamine as an efficient catalyst in the Heck cross-coupling reaction

The [Pd{C₆H₂(CH₂CH₂NH₂)-(OMe)₂,3,4} (μ-Br)]₂ complex of homoveratrylamine was synthesized and its application in the Heck coupling reaction was studied. This complex had been demonstrated to be active and efficient catalyst for the Heck reaction of aryl iodides, bromides and even chlorides. The cross-coupled products were produced in excellent yields in a short reaction time using catalytic amounts of [Pd{C₆H₂(CH₂CH₂NH₂)-(OMe)₂,3,4} (μ-Br)]₂ complex in N-methyl-2-pyrrolidinone (NMP at 130 °C).     

Separation of C1-C5 aliphatic carboxylic acids on a highly sulfonated styrene-divinylbenzene copolymer resin column with a C6 aliphatic carboxylic acid solution as the mobile phase

Simultaneous separation of C₁-C₅ aliphatic carboxylic acids (formic, acetic, propionic, iso-butyric, butyric, iso-valeric and valeric acids) on a highly sulfonated styrene-divinylbenzene copolymer resin column (TSKgel SCX,  mm i.d.) was performed with C₆ aliphatic carboxylic acids (3-methyl-n-valeric, iso-caproic and caproic acids) solutions as the mobile phases. Using 0.05 mM sulfuric acid at pH 4.0 as the mobile phase, although good separation of these C₁-C₅ acids was achieved, peaks of the C₅ acids (iso-valeric and valeric acids) with large hydrophobicity tailed strongly. In contrast, using 1 mM C₆ acids at pH ca. 4.0 as the mobile phases, although vacant peaks corresponding to the C₆ acids in the mobile phase appeared, the peak shapes of the C₅ acids were improved greatly. Excellent simultaneous separation, symmetrical peaks and relatively high-sensitivity conductimetric detection for these C₁-C₅ acids were achieved on the TSKgel SCX column in 15 min with 1 mM iso-caproic acid at pH 4.0 as the mobile phase.     

Application of dimeric cyclopalladated complex of tribenzylamine as an efficient catalyst in the Heck cross-coupling reaction

The activity of [Pd{C₆H₄(CH₂N(CH₂Ph)₂)} (μ-Br)]₂ complex was investigated in the Heck-Mizoroki C-C cross-coupling reaction. This complex is an active and efficient catalyst for the Heck reaction of aryl iodides, bromides and even chlorides and also arenesulfonyl chlorides. The cross-coupled products were produced in excellent yields in short reaction time using a catalytic amount of [Pd{C₆H₄(CH₂N(CH₂Ph)₂) (μ-Br)]₂ complex in NMP at 130 °C.     

Niobium pentachloride-silver perchlorate as an efficient catalyst in the Friedel-Crafts acylation and Sakurai-Hosomi reaction of acetals

Friedel-Crafts acylation catalyzed by niobium pentachloride with silver salt is described. Aromatic compounds with Ac₂O or Bz₂O were smoothly converted into the corresponding ketones in good to excellent yields. This system was also applied to the Sakurai-Hosomi reaction using acetals. The reaction proceeded quite rapidly to give the desired products in excellent yields.