Kinetic Studies on the Palladium(II)‐Catalyzed Oxidative Cross‐Coupling of Thiophenes with Arylboron Compounds and Their Mechanistic Implications

Reaction orders for the key components in the palladium(II)‐catalyzed oxidative cross‐coupling between phenylboronic acid and ethyl thiophen‐3‐yl acetate were obtained by the method of initial rates. It turned out that the reaction rate not only depended on the concentration of palladium trifluoroacetate (reaction order: 0.97) and phenylboronic acid (reaction order: 1.26), but also on the concentration of the thiophene (reaction order: 0.55) and silver oxide (reaction order: ?1.27). NMR spectroscopy titration studies established the existence of 1:1 complexes between the silver salt and both phenylboronic acid and ethyl thiophen‐3‐yl acetate. A low inverse kinetic isotope effect (k_H/k_D=0.93) was determined upon employing the 4‐deuterated isotopomer of ethyl thiophen‐3‐yl acetate and monitoring its reaction to the 4‐phenyl‐substituted product. A Hammett analysis performed with para‐substituted 2‐phenylthiophenes gave a negative ρ value for oxidative cross‐coupling with phenylboronic acid. Based on the kinetic data and additional evidence, a mechanism is suggested that invokes transfer of the phenyl group from phenylboronic acid to a 1:1 complex of palladium trifluoroacetate and thiophene as the rate‐determining step. Proposals for the structure of relevant intermediates are made and discussed.     

Electrochemical Determination of L‐Lactate Using Phenylboronic Acid Monolayer‐Modified Electrodes

The surface of a gold (Au) disk electrode was modified with a self‐assembled monomolecular layer of dithiobis(4‐butylamino‐m‐phenylboronic acid) (DTBA‐PBA) to prepare L ‐lactate‐sensitive electrodes. The DTBA‐PBA‐modified electrodes exhibited an attenuated cyclic voltammogram (CV) for the Fe(CN)₆^3? ion in the presence of L ‐lactate, as a result of the formation of phenylboronate ester of L ‐lactate accompanied with the addition of OH^? ion to the boron atom. In other words, the negatively charged DTBA‐PBA monolayer blocked the electrode surface from the access of the Fe(CN)₆^3?/4? ions. Thus, the DTBA‐PBA monolayer‐modified Au electrode can be used for determining L ‐lactate on the basis of the change in redox current of Fe(CN)₆^3?/4? ions. The calibration graph useful for determining 1–30 mM L ‐lactate was obtained.     

2‐Aminopyridinium–succinate–succinic acid (2/1/1)

In the title compound, 2C₅H₇N₂⁺·C₄H₄O₄^2?·C₄H₆O₄, cyclic eight‐membered hydrogen‐bonded rings exist involving 2‐amino­pyridinium and succinate ions. The succinic acid and succinate moieties lie on inversion centres. Succinic acid mol­ecules and succinate ions are linked into zigzag chains by O—H?O hydrogen bonds, with O?O distances of 2.6005 (16) Å.     

Synthesis of novel palladium N‐heterocyclic‐carbene complexes as catalysts for Heck and Suzuki cross‐coupling reactions

Novel palladium‐1,3‐dialkylperhydrobenzimidazolin‐2‐ylidene (2a–c) and palladium‐1,3‐dialkylimidazolin‐2‐ylidene complexes (4a,b) have been prepared and characterized by C, H, N analysis, ¹H‐NMR and ¹³C‐NMR. Styrene or phenylboronic acid reacts with aryl halide derivatives in the presence of catalytic amounts of the new palladium‐carbene complexes, PdCl₂(1,3‐dialkylperhydrobenzimidazolin‐2‐ylidene) or PdCl₂(1,3‐dialkylimidazolin‐2‐ylidene) to give the corresponding C? C coupling products in good yields. Copyright © 2006 John Wiley & Sons, Ltd.     

Untersuchungen über (1:1)-Chelate des Curcumins mit Borsäure und Phenylborsäuren

The existence of 1∶1 boron-curcumin chelates in solution has been proved by the straight-line method of Asmus. The compounds with boric resp. phenylboronic acid propably exist as diacetato-resp. phenylacetato-boron chelates of curcumin. The dissociation constants of the 1∶1 complexes of curcumin and boron are K _D =4×10^?5 with boric acid in acetic acid and 3×10^?4 in dioxan, 1×10^?3 with phenylboronic acid in dioxan and 1×10^?4 when stabilized with phenol, 7×10^?5 with diphenylborinic acid in dioxan solution. All boron-curcumin chelates are formed from the quinonoid protonized form of curcumin, which can be stabilized by phenol.     

Dark Fermentative Hydrogen Production from Neutralized Acid Hydrolysates of Conifer Pulp

Concentrated acid hydrolysis of cellulosic material results in high dissolution yields. In this study, the neutralization step of concentrated acid hydrolysate of conifer pulp was optimized. Dry conifer pulp hydrolysis with 55?% H₂SO₄ at 45?°C for 2?h resulted in total sugar yields of 22.3?C26.2?g/L. The neutralization step was optimized for solid Ca(OH)₂, liquid Ca(OH)₂ or solid CaO, mixing time, and water supplementation. The highest hydrogen yield of 1.75?mol?H₂/mol glucose was obtained with liquid Ca(OH)₂, while the use of solid Ca(OH)₂ or CaO inhibited hydrogen fermentation. Liquid Ca(OH)₂ removed sulfate to below 30?mg SO₄ ^2?/L. Further optimization of the neutralization conditions resulted in the yield of 2.26?mol?H₂/mol glucose.     

pH‐Switchable Redox Reactions and Bioelectrocatalytic Processes Using Au Nanoparticles‐Modified Electrodes

Boronate ester complexes generated between methylene blue (MB⁺)‐functionalized Au nanoparticles (NPs) and electrode surfaces are implemented to stimulate the bioelectrocatalyzed reduction of H₂O₂ in the presence of horseradish peroxidase (HRP). Two kinds of Au NPs are prepared: Class I includes MB⁺/phenylboronic acid as a modifying layer, whereas Class II includes MB⁺/dithiothreitol as a mixed capping layer. The Class I or II NPs form boronate ester complexes with a dithiothreitol‐ or phenylboronic acid‐functionalized Au electrodes, respectively. By the cyclic loading of the NPs on the electrodes (pH 8.1), and the removal of the NPs (pH 1.5), switchable bioelectrocatalyzed reduction of H₂O₂ is demonstrated.     

The role of intermolecular interactions in the assemblies of Fe and Co tetrakis-isothiocyanatometalates with tris(1,10-phenanthroline)-Ru: Crystal structures of two dual-metal assemblies featuring octahedral cationic and tetrahedral anionic modules

Two new dual-metal assemblies: 2[Ru(phen)₃]²⁺·[Fe(SCN)₄]²⁻·2SCN⁻·4H₂O 1 and [Ru(phen)₃]²⁺·[Co(SCN)₄]²⁻2, (phen:1,10-phenanthroline), have been prepared and their structures were characterized by X-ray diffraction. In 1, the cationic octahedral enantiomers are arranged with a ΛΔΛΔΛ sequence supported by π-π stacking and the anionic inorganic tetrahedral units are oriented between these stacks by interacting with the nearby water molecules through strong O-H?O and O-H?S hydrogen bonds. In 2, homochiral double helices in the b-direction are revealed, with tetrakis-isothiocyanate Co^II anions arranged in the crystal to furnish one-dimensional (1D)-helical chains with S?S intermolecular interactions at 3.512(2) and 3.966(2) Å supporting [Ru(phen)₃]²⁺Λ- and Δ-helices with Ru?Ru shortest distance of 8.676(7) Å. In both 1 and 2, the supramolecular assembly is maintained by C-H?S hydrogen bonds extending between the phenanthroline aromatic carbons in the cationic nodes and the sulphur atoms of the isothiocyanates anions. Analysis of S?S interactions in isothiocyanate containing compounds using Cambridge structural database (CSD) showed an angle dependence categorizing these interactions into “type-I” and “type-II”.     

Exploring Regioselective Bond Cleavage and Cross‐Coupling Reactions using a Low‐Valent Nickel Complex

Recently, esters have received much attention as transmetalation partners for cross‐coupling reactions. Herein, we report a systematic study of the reactivity of a series of esters and thioesters with [{(dtbpe)Ni}₂(μ‐η²:η²‐C₆H₆)] (dtbpe=1,2‐bis(di‐tert‐butyl)phosphinoethane), which is a source of (dtbpe)nickel(0). Trifluoromethylthioesters were found to form η²‐carbonyl complexes. In contrast, acetylthioesters underwent rapid C_acyl?S bond cleavage followed by decarbonylation to generate methylnickel complexes. This decarbonylation could be pushed backwards by the addition of CO, allowing for regeneration of the thioester. Most of the thioester complexes were found to undergo stoichiometric cross‐coupling with phenylboronic acid to yield sulfides. While ethyl trifluoroacetate was also found to form an η²‐carbonyl complex, phenyl esters were found to predominantly undergo C_aryl?O bond cleavage to yield arylnickel complexes. These could also undergo transmetalation to yield biaryls. Attempts to render the reactions catalytic were hindered by ligand scrambling to yield nickel bis(acetate) complexes, the formation of which was supported by independent syntheses. Finally, 2‐naphthyl acetate was also found to undergo clean C_aryl?O bond cleavage, and although stoichiometric cross‐coupling with phenylboronic acid proceeded with good yield, catalytic turnover has so far proven elusive.     

MCM-22分子筛酸性的DFT理论计算研究

本文利用量子力学中的密度泛函理论(DFT)计算，研究了MCM-22分子筛上骨架Al在8个不同的T位的分布和Br?nsted酸的落位及强度。所有计算基于分子筛的8T簇模型 (H₃SiO)₃Si-O(H)-T(OSiH₃)₃(T=Si，Al)，采用DFT的BLYP方法，所有原子均应用DNP基组。通过计算(Al，H)/Si替代能和质子亲和势，得出推论：MCM-22分子筛中骨架Al的最有利落位在T1，T4，T3和T8位。而形成Br?nsted-酸的最可能的位置为Al1-O3-Si4，Al4-O3-Si1，Al3-O11-Si2和Al8-O10-Si2桥基。Al1-O3H-Si4和Al4-O3H-Si1位的酸性强度接近，Al3-O11H-Si2和Al8-O10H-Si2位的酸性分别略低于和略高于前两个酸位。通过计算模板剂分子六次甲基亚胺(HMI)与B-酸中心的相互作用，进一步探讨了HMI对分子筛中Al落位的靶向作用。     

Sensitive Nonenzymatic Electrochemiluminescence Determination of Hydrogen Peroxide in Dental Products using a Polypyrrole/Polyluminol/Titanium Dioxide Nanocomposite

A layer-by-layer assembled of a polypyrrole and polyluminol was synthesized through the electrodeposition of pyrrole and luminol in acidic medium on a graphite electrode. The electrode was then modified by casting titanium dioxide (TiO₂) nanoparticles on its surface for enhancing electrochemiluminescence of luminol. The properties of this electrochemiluminescence sensor were studied by cyclic voltammetry, electrochemical impedance spectroscopy, field emission scanning electron microscopy, and energy dispersive X-ray spectroscopy. The results demonstrated that the modification of this electrochemiluminescence sensor shows sensitive response for the determination of hydrogen peroxide. Figures of merit include broad linearity from 1?pmol L^?1 to 4?µmol L^?1 (R²?=?0.996) with a limit of detection as low as 0.40?pmol L^?1 at a signal-to-noise ratio of three and good reproducibility with relative standard deviation of 4% for the determination of a 400?nmol L^?1 hydrogen peroxide solution (n?=?4), along with favorable long-term stability. The presence of glucose, citric acid, uric acid, dopamine, and ascorbic acid at concentrations as high as 100?nmol L^?1 of H₂O₂ did not produce any electrochemiluminescence signals, which demonstrates the selective nature of this modified electrode. The sensor was also used for the determination of H₂O₂ in mouthwash formulations and dental whitelight gels.     

[PdCl2{8-(di-tert-butylphosphinooxy)quinoline)}]: a highly efficient catalyst for Suzuki-Miyaura reaction

The complex [PdCl₂(P-N)] containing the basic and sterically demanding 8-(di-tert-butylphosphinooxy)quinoline ligand (P-N) is a highly efficient catalyst for the coupling of phenylboronic acid with aryl bromides or aryl chlorides. The influence of solvent and base has been investigated, the highest rates being observed at 110 °C in toluene with K₂CO₃ as the base. With aryl bromides the reaction rates are almost independent on the electronic properties of the para aryl substituents, on the contrary, reduced reaction rates are observed when bulky substituents are present on the substrate. Nevertheless the coupling of 2-bromo-1,3,5-trimethylbenzene with phenylboronic acid can be carried out to completion in 2 h using a catalyst loading of 0.02 mol %. Under optimized reaction conditions, turnover frequencies as high as 1900 h⁻¹ can be obtained in the coupling of 4-chloroacetophenone with phenylboronic acid; lower reaction rates are obtained with substrates bearing EDG substituents on the aryl group.     

N‐heterocyclic carbene complexes of Rh(I) and electronic effects on catalysts for 1,2‐addition of phenylboronic acid to aldehydes

1,3‐Diarylsubstituted imidazolinium salts, (NHC‐H)Cl, 3, containing hydrogen or alkyl groups at the 4,5‐positions of the imidazolidine ring, served as precursors to rhodium(I) complexes [RhCl(NHC)COD], 4, which were converted into cis‐[RhCl(NHC)(CO)₂] complexes, 5. All compounds prepared were characterized by elemental analyses, ¹H NMR and ¹³C NMR. The relative σ‐donor/π‐acceptor strength of the NHC ligands was determined by means of IR spectroscopy of 5. The ability of NHCs in 4 to enchance activity was explored in the 1,2‐addition of phenylboronic acid to aldehydes. A good correlation was observed between catalytic activity and the electron‐donating power of the NHC ligands. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis of Pyrazolo[3,4‐d]pyrimidin‐4‐ones Catalyzed by Br?nsted‐acidic Ionic Liquids as Highly Efficient and Reusable Catalysts

A convenient and efficient method for the synthesis of pyrazolo[3,4‐d]pyrimidin‐4‐ones via heterocyclization reaction of 5‐amino‐1H‐pyrazole‐4‐carboxamides with triethyl orthoesters using two Br?nsted‐acidic ionic liquids, 3‐methyl‐1‐(4‐sulfonic acid)butylimidazolium hydrogen sulfate [MIM⁺(CH₂)₄SO₃H][HSO₄^?] or N‐(4‐sulfonic acid)butyl triethylammonium hydrogen sulfate [Et₃N⁺(CH₂)₄SO₃H][HSO₄^?], as efficient homogeneous catalysts under solvent‐free conditions is described.     

Mechanism of the Aerobic Homocoupling of Phenylboronic Acid on Au20−: A DFT Study

The mechanism of the gold nanocluster‐catalyzed aerobic homocoupling of arylboronic acids has been elucidated by means of DFT calculations with Au₂₀^? as a model cluster for the Au:[poly(N‐vinylpyrrolidin‐2‐one)] catalyst. We found that oxygen affects the adsorption of phenylboronic acid and, by lowering the energy barrier, a water molecule enhances dissociation of the C?B bond, which is probably the rate‐determining step. The key role of oxygen is in activating the surface of the gold cluster by generating Lewis acidic sites for adsorption and activation of the phenylboronic acid, leading to the formation of biphenyl through a superoxo‐like species. Moreover, the oxygen adsorbed on the Au nanocluster can act as an oxidant for phenylboronic acid, giving phenol as a byproduct. As shown by NBO analysis, the basic aqueous reaction medium facilitates the reductive elimination process by weakening the Au?C bond, thereby enhancing the formation of biphenyl. The coupling of phenyl and reductive elimination of biphenyl occur at the top or facet site with low‐energy‐barrier through spillover of phenyl group on Au NC. The present findings are useful for the interpretation or design of other coupling reactions with Au NC.     

Molecular structure and spectroscopic properties of N-methylmorpholine betaine complex with 4-hydroxybenzoic acid

Crystal structure of the 1:1 complex of N-methylmorpholine betaine (MMB) with 4-hydroxybenzoic acid (4-HBA) has been determined by X-ray diffraction. Crystals are orthorhombic, space group Pna2₁ with a=7.933(2), b=15.336(3), and Z=4, R=0.033. The acid molecule forms two O-H?O hydrogen bonds with two betaine molecules. The COOH group of the acid forms shorter hydrogen bond with betaine (2.587(2) Å), than the hydroxyl group (2.677(2) Å). The carbonyl oxygen atom of the acid also interacts with the methylene hydrogen atom of the betaine through C-H?O hydrogen bond (3.256(2) Å). Thus formed infinite chains parallel to the z axis are connected by other C-H?O hydrogen bonds into layers perpendicular to the x axis. The morpholine ring has a chair conformation with the methyl group in the equatorial position and CH₂COO⁻ group in the axial one. The powder FTIR and Raman spectra and semiempirical calculations of the isolated molecule confirm the structure of the complex investigated. The ¹H and ¹³C spectra indicate that in DMSO-d₆ solution, protons are not transferred from the acid to the betaine molecules.     

Lead(II) coordination frameworks with 3-fluorophthalic acid: hydrothermal synthesis,crystal structure,and luminescence

Hydrothermal reactions of Pb(NO₃)₂ and 3-fluorophthalic acid (H₂Fpht) in the absence or presence of 2,2′-bipyridine (bpy) gave two coordination polymers: Pb₅(Fpht)₄(Fba)₂ (1) and [Pb₂(Fpht)₂(bpy)(H₂O)]·3H₂O (2). The 3-fluorobenzoic acid (HFba) results from an in situ decarboxylation of H₂Fpht. Solid 1 displays a 2-D structure, comprising center-related hexanuclear [Pb₃(COO)₆]₂ units. There are three crystallographically different Pb(II) ions and two different ligands, Fpht and Fba. The Fpht ligands adopt μ_6?:?η⁵η³ and μ_6?:?η³η⁴ unusual bridging coordination modes. A 3-D supramolecular architecture is formed via C–H?F hydrogen bonds. Solid 2 possesses a 1-D chain structure, comprising center-related tetranuclear [Pb₂(COO)₄]₂ units. There are two crystallographically different Pb(II) ions. The Fpht ligands adopt μ_3?:?η²η³ and μ_4?:?η³η³ bridging coordination. The free water molecules form (H₂O)₃ clusters to link the 1-D chain by hydrogen bonds. A 3-D supramolecular assembly is constructed via hydrogen bonds between the free water and the F of Fpht ligands. Fluorescence of the complexes originates from π*–π transitions of the ligands.     

The 2:1 complex of maleic acid and 1,4‐diazabicyclo[2.2.2]octane: hydrogen‐bonded sheets linked by C–H⋯O hydrogen bonds

In the title complex, 1,4‐diazo­niabi­cyclo­[2.2.2]­octane bis­(hy­drogen maleate), C₆H₁₄N₂²⁺·2C₄H₃O₄^?, the C₄H₃O₄^? and C₆H₁₄N₂²⁺ ions, derived from maleic acid and 1,4‐di­aza­bi­cyclo­[2.2.2]­octane, respectively, are disordered across a mirror plane in space group Cmc2₁, and they are linked by two nearly linear N—H?O hydrogen bonds, with N?O distances of 2.662 (3) and 2.614 (4) Å, and N—H?O angles of 173°. The crystal structure consists of sheets with reticulations of 3.3792 (4) Å in stratum and 7.3892 (8) Å in width. The sheets are linked by C—H?O hydrogen bonds.     

Boron‐Doped,Carbon‐Coated SnO2/Graphene Nanosheets for Enhanced Lithium Storage

Heteroatom doping is an effective method to adjust the electrochemical behavior of carbonaceous materials. In this work, boron‐doped, carbon‐coated SnO₂/graphene hybrids (BCTGs) were fabricated by hydrothermal carbonization of sucrose in the presence of SnO₂/graphene nanosheets and phenylboronic acid or boric acid as dopant source and subsequent thermal treatment. Owing to their unique 2D core–shell architecture and B‐doped carbon shells, BCTGs have enhanced conductivity and extra active sites for lithium storage. With phenylboronic acid as B source, the resulting hybrid shows outstanding electrochemical performance as the anode in lithium‐ion batteries with a highly stable capacity of 1165 mA h g^?1 at 0.1 A g^?1 after 360 cycles and an excellent rate capability of 600 mA h g^?1 at 3.2 A g^?1, and thus outperforms most of the previously reported SnO₂‐based anode materials.