An efficient synthesis of 5-substituted 1H-tetrazoles via B(C6F5)3 catalyzed [3+2] cycloaddition of nitriles and sodium azide

A simple and efficient protocol is developed for the synthesis of 5-substituted 1H-tetrazole derivatives from various nitriles and sodium azide (NaN₃) via [3+2] cycloaddition reaction using B(C₆F₅)₃ as a catalyst. The present synthetic method displayed significant advantages such as low catalyst loading, mild reaction conditions, low toxicity, easy work-up, high yields, and compatibility with other functional groups.     

CuFe2O4 nanoparticles: a magnetically recoverable and reusable catalyst for the synthesis of 5-substituted 1H-tetrazoles

An efficient and economical protocol for the synthesis of 5-substituted 1H-tetrazoles from various nitriles and sodium azide is described using magnetically recoverable and reusable CuFe₂O₄ nanoparticles. A wide variety of aryl nitriles underwent [2+3] cycloaddition under mild reaction conditions to afford tetrazoles in good to excellent yields. The catalyst was magnetically separated and reused five times without significant loss of catalytic activity.     

Copper(II) triflate promoted cycloaddition of α-alkyl or aryl substituted N-tosylaziridines with nitriles: a highly efficient synthesis of substituted imidazolines

Cu(OTf)₂ or Zn(OTf)₂ mediated [3+2] cycloaddition reactions of various α-alkyl or aryl substituted N-tosylaziridines with nitriles is described for the syntheses of substituted imidazolines. A mechanism for the cycloaddition is proposed to rationalize the formation of a nonracemic imidazoline from optically pure aziridine.     

An efficient and convenient KF/Al2O3 mediated synthesis of nitriles from aldehydes

KF/Al₂O₃ brings about a facile one-pot and economical conversion of various aryl and alkyl aldehydes into the corresponding nitriles in high yields by reaction with hydroxylamine hydrochloride.     

AgNO3 catalyzed synthesis of 5-substituted-1H-tetrazole via [3+2] cycloaddition of nitriles and sodium azide

An efficient one-pot, convenient catalysis for the synthesis of 5-substituted-1H-tetrazoles is reported. The [3+2] cycloaddition involves various nitriles, sodium azide in refluxing DMF and AgNO₃ as catalyst to give corresponding 5-substituted-1H-tetrazoles in good to excellent yields. It is expected that the reaction proceeds via in situ formation of a silver azide species, which participates in coordination of nitrile moiety followed by cycloaddition of azide ion to give tetrazole.     

Silica supported lanthanum triflate mediated synthesis of 5-substituted-1H tetrazoles

Silica supported lanthanum triflate (Ln(OTf)₃-SiO₂) promoted synthesis of 5-substituted 1H-tetrazoles via [3+2] cycloaddition between aromatic/heteroaromatic nitriles and sodium azide is a high product yielding, facile, and straightforward procedure. Non toxicity, recovery, and reusability for three continuous cycles are the noteworthy features of the currently employed heterogeneous catalyst.     

Efficient synthesis of β-acetamido ketones using BF3/Et2O: a fertile approach toward avoiding usage of acetyl chloride

Abstract

A simple and efficient one pot synthesis of β-acetamido ketones from reaction of aldehydes, enolizable ketones, alkyl/aryl nitriles, and BF₃/Et₂O catalyst under microwave irradiations is described. This method allows synthesis of β-acetamido ketones without using corrosive and hazardous acetyl chloride. It is applicable for diversified aldehydes and active methylene ketones supported by synthesizing varieties of β-acetamido ketones. As per literature, majority of synthetic methods of β-acetamido ketones are restricted to use of acetonitrile lonely, as a nitrile component. This method is found to be equally effective for range of nitriles, also. Key features of reported method are simple reaction protocol, better yields, shorter reaction time, and nonhazardous reaction conditions which support the “Green Chemistry approach.”     

Antimony Trioxide as an Efficient Lewis Acid Catalyst for the Synthesis of 5-Substituted 1H-Tetrazoles

Sb₂O₃ was found to be effective as a catalyst for a smooth (2 + 3) cycloaddition of sodium azide with nitriles to afford 5-substituted 1H-tetrazoles in good yields.     

An efficient synthetic route to substituted tetrahydropyrimidines by Cu(OTf)2-mediated nucleophilic ring-opening followed by the [4+2] cycloaddition of N-tosylazetidines with nitriles

A highly efficient strategy for Cu(OTf)₂-mediated S_N2 type nucleophilic ring-opening followed by the [4+2] cycloaddition reactions of a number of 2-aryl-N-tosylazetidines with nitriles to afford a variety of substituted tetrahydropyrimidines in excellent yields is reported. The resulting tetrahydropyrimidines could easily be transformed into synthetically important 1,3-diamines by acid-catalyzed hydrolysis. The strategy has been extended to the synthesis of enantiomerically pure tetrahydropyrimidines from enantiopure disubstituted azetidines. The reaction proceeds through an S_N2 type mechanism as proposed by us earlier.     

Preparation and photocatalytic activity of Sb2S3/Bi2S3 doped TiO2 from complex precursor via gel-hydrothermal treatment

Sb₂S₃/Bi₂S₃ doped TiO₂ were prepared with the coordination compounds [M(S₂CNEt)₃] (M=Sb, Bi; S₂CNEt=pyrrolidinedithiocarbamate) as precursors via gel-hydrothermal techniques. The doped TiO₂ were characterized by XRD, SEM, XPS and UV-vis diffuse reflectance means. The photocatalyst based on doped TiO₂ for photodecolorization of 4-nitrophenol (4-NP) was examined. The optimal Bi₂S₃/Sb₂S₃ content, pH and different doped techniques have been investigated. Photocatalytic tests reveal that M₂S₃ doped TiO₂ via the gel-hydrothermal route performs better photocatalytic activity for photodegradation reaction of 4-nitrophenol (4-NP).     

Phenoxide-assisted P-C bond cleavage in PdCl2(PPh3)2 under very mild conditions

PdCl₂(PPh₃)₂ reacted with NaOAr (Ar = Ph, p-tolyl) at 0 °C to afford PdCl(Ph)(PPh₃)₂, instead of PdCl(OAr)(PPh₃)₂, in 12-16% isolated yields based on Pd. The structure was confirmed by NMR and X-ray crystallography. GC-MS analysis of the reaction solution revealed that OPPh₂(OAr), OPPh(OAr)₂, and OP(OAr)₃ are formed, while NMR studies indicated that PdCl(Ph)(PPh₃)₂ is produced when PdCl(OAr)(PPh₃)₂ decomposes. The reaction of PdCl₂(PPh₃)₂ with Bu₃Sn(OC₆H₄-p-OMe) also gave PdCl(Ph)(PPh₃)₂ in 8% isolated yield. These results suggest that PdCl(OAr)(PPh₃)₂ is highly labile and the aryloxy ligand exchanges with the phenyl groups in triphenylphosphine even under very mild conditions.     

Reactions between YBa2Cu3O7−δ and La2O3 and SrCO3

Solid state reactions at 925°C between the high-T _c ceramic superconductor YBa₂Cu₃O_7?δ and La₂O₃ and SrCO₃, respectively, mixed in various molar ratiosr=MeO_n/YBa₂Cu₃O_7?δ, were studied using X-ray powder diffraction and scanning electron microscopy. The reaction between YBa₂Cu₃O_7?δ and La₂O₃ yielded (La_1?xBa_x)₂CuO_4?δ, withx≈0.075?0.10. La_2?xBa_1+xCu₂O_6?δ, withx≈0.2?0.25 and La-doped (Y_1?xLa_x)₂BaCuO₅, withx≈0.10?0.15. Forr=3.0, Y-doped La₂BaCuO₅ resulted also. The reaction between YBa₂Cu₃O_7?δ and SrCO₃ yielded (Sr_1?zBa_z)₂CuO₃, withz≈0.1, Y₂(Ba_1?zSr_z)CuO₅, withz=0.1?0.15, and a nonsuperconducting compound with an approximate composition of Y(Ba_0.5Sr_0.5)₅Cu_3.5O_10±δ. At values ofr≤2.0, unsubstituted YBa₂Cu₃O_7?delta was found in the reaction products.     

Acetohydroxamic acid: a new reagent for efficient synthesis of nitriles directly from aldehydes using Bi(OTf)3 as the catalyst

An efficient method for the preparation of nitriles directly from aldehydes by reaction with AHA using Bi(OTf)₃ as the catalyst is described. Bi(OTf)₃ is shown to be an efficient catalyst also for the conversion of aldoximes into nitriles.     

Structural and electrical properties of the 2Bi2O3·3ZrO2 system

Powder mixtures of α-Bi₂O₃ (bismite) and monoclinic m-ZrO₂ (baddeleyite) in the molar ratio 2:3 were mechanochemically and thermally treated with the goal to examine the phases, which may appear during such procedures. The prepared samples were characterized by X-ray powder diffraction, differential scanning calorimetry (DSC), electrical measurements, as well as scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The mechanochemical reaction leads to the gradual formation of a nanocrystalline phase, which resembles δ-Bi₂O₃, a high-temperature Bi₂O₃ polymorph. Isothermal sintering in air at a temperature of 820 °C for 24 h followed by quenching to room temperature yielded a mixture of ZrO₂-stabilized β-Bi₂O₃ and m-ZrO₂ phases, whereas in slowly cooled products, the complete separation of the initial α-Bi₂O₃ and m-ZrO₂ constituents was observed. The dielectric permittivity of the sintered samples significantly depended on the temperature. The sintered and quenched samples exhibited a hysteresis dependence of the dielectric shift, showing that the ZrO₂-doped β-Bi₂O₃ phase possess ferroelectric properties, which were detected for the first time. This fact, together with Rietveld refinement of the β-Bi₂O₃/m-ZrO₂ mixture based on neutron powder diffraction data showed that ZrO₂-doped β-Bi₂O₃ has a non-centrosymmetric structure with as the true space group. The ZrO₂ content in the doped β-Bi₂O₃ and the crystal chemical reasons for the stabilization of the β-Bi₂O₃ phase by the addition of m-ZrO₂ are discussed.     

Phase relations, crystal chemistry, and dielectric properties in sections of the La2O3-CaO-MgO-TiO2 system

Subsolidus phase equilibria and crystal chemistry were studied for the La₂O₃-MgO-TiO₂ system and for the ternary sections LaMg_1/2Ti_1/2O₃-CaTiO₃-La₂O₃ and LaMg_1/2Ti_1/2O₃-CaTiO₃-La_0.833Mg_0.25Ti_0.75O₃ in the quaternary La₂O₃-CaO-MgO-TiO₂ system. Dielectric properties (relative permittivity and temperature coefficient of resonant frequency, τ_f) were measured at 5-10 GHz and mapped onto the phase equilibria relations to reveal the compositions of temperature-stable (τ_f=0) compounds and mixtures. Phase equilibria relations were obtained by X-ray powder diffraction analysis of approximately 80 specimens prepared by solid-state reactions in air at ∼1450°C. Six ternary phases were found to form in the La₂O₃-MgO-TiO₂ system, including the three previously reported compounds LaMg_1/2Ti_1/2O₃, La₅Mg_0.5Ti_3.5O₁₅, and “La₆MgTi₄O₁₈”; and the new phases La₁₀MgTi₉O₃₄, La₉Mg_0.5Ti_8.5O₃₁, and a perovskite-type solid solution (1−x)LaMg_1/2Ti_1/2O₃-xLa_2/3TiO₃ (0?x?0.5). The phase previously reported as “La₆MgTi₄O₁₈” was found to form off-composition, apparently as a point compound, at La₆Mg_0.913Ti_4.04O₁₈. Indexed experimental X-ray powder diffraction patterns are given for LaMg_1/2Ti_1/2O₃, La₅Mg_0.5Ti_3.5O₁₅, La₆Mg_0.913Ti_4.04O₁₈, La₁₀MgTi₉O₃₄, and La₉Mg_0.5Ti_8.5O₃₁. LaMg_1/2Ti_1/2O₃ exhibits a slightly distorted perovskite structure with ordered B-cations (P2₁/n; a=5.5608(2) Å, b=5.5749(3) Å, c=7.8610(5) Å, β=90.034(4)°). La₅Mg_0.5Ti_3.5O₁₅ (Pm1; a=5.5639(1), c=10.9928(5) Å) and La₆Mg_0.913Ti_4.04O₁₈ (R3m; a=5.5665(1), c=39.7354(9) Å) are n=5 and n=6 members, respectively, of the (111) perovskite-slab series A_nB_n−1O_3n. The new phases La₁₀MgTi₉O₃₄ (a=5.5411(2), b=31.3039(9), c=3.9167(1) Å) and La₉Mg_0.5Ti_8.5O₃₁ (a=5.5431(2), b=57.055(1), c=3.9123(1) Å) are n=5 and n=4.5 members, respectively, of the (110) perovskite-slab series A_nB_nO_3n+2, which exhibit orthorhombic subcells; electron diffraction revealed monoclinic superlattices with doubled c-parameters for both compounds. Extensive perovskite-type solid solutions form in the ternary sections LaMg_1/2Ti_1/2O₃-CaTiO₃-La₂O₃ and LaMg_1/2Ti_1/2O₃-CaTiO₃-La_0.833Mg_0.25Ti_0.75O₃. The La₂O₃-MgO-TiO₂ system contains two regions of temperature-stable (τ_f=0) compositions. The quaternary La₂O₃-CaO-MgO-TiO₂ system contains an extensive single-phase perovskite-type volume through which passes a surface of temperature-stable compositions with permittivities projected to be in the 40-50 range. Traces of this surface occur as lines of τ_f=0 perovskite-type phases in the ternary sections LaMg_1/2Ti_1/2O₃-CaTiO₃-La₂O₃ and LaMg_1/2Ti_1/2O₃-CaTiO₃-La_0.833Mg_0.25Ti_0.75O₃.     

Crystal growth, structure determination, and optical properties of new potassium-rare-earth silicates K3RESi2O7 (RE=Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu)

Single crystals of K₃RESi₂O₇ (RE=Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu) were grown from a potassium fluoride flux. Two different structure types were found for this series. Silicates containing the larger rare earths, RE=Gd, Tb, Dy, Ho, Er, Tm, Yb crystallize in a structure K₃RESi₂O₇ that contains the rare-earth cation in both a slightly distorted octahedral and an ideal trigonal prismatic coordination environment, while in K₃LuSi₂O₇, containing the smallest of the rare earths, lutetium is found solely in an octahedral coordination environment. The structure of K₃LuSi₂O₇ crystallizes in space group P6₃/mmc with a=5.71160(10) Å and c=13.8883(6) Å. The structures containing the remaining rare earths crystallize in the space group P6₃/mcm with the lattice parameters of a=9.9359(2) Å, c=14.4295(4) Å, (K₃GdSi₂O₇); a=9.88730(10) Å, c=14.3856(3) Å, (K₃TbSi₂O₇); a=9.8673(2) Å, c=14.3572(4) Å, (K₃DySi₂O₇); a=9.8408(3) Å, c=14.3206(6) Å, (K₃HoSi₂O₇); a=9.82120(10) Å, c=14.2986(2) Å, (K₃ErSi₂O₇); a=9.80200(10) Å, c=14.2863(4) Å, (K₃TmSi₂O₇); a=9.78190(10) Å, c=14.2401(3) Å, (K₃YbSi₂O₇). The optical properties of the silicates were investigated and K₃TbSi₂O₇ was found to fluoresce in the visible.     

Synthesis, structure and physical properties of the new uranium ternary phase U3Co2Ge7

A new ternary compound, U₃Co₂Ge₇, has been synthesized from the corresponding elements by a high temperature reaction using molten tin flux. It crystallizes in the orthorhombic La₃Co₂Sn₇-type (Pearson's symbol oC24, space group Cmmm, No. 65) with lattice parameters determined from single-crystal X-ray diffraction as follows: a=4.145(2) Å; b=24.920(7); c=4.136(2) Å, V=427.2(3) Å³. Structure refinements confirm an ordered structure having two crystallographically inequivalent uranium atoms, occupying sites with dissimilar coordination. U₃Co₂Ge₇ orders ferromagnetically below 40 K and undergoes a consecutive magnetic transition at 20 K. These results have been obtained from temperature- and field-dependent magnetization, resistivity and heat-capacity measurements. The estimated Sommerfeld coefficient γ=87 mJ/mol-U K² suggests U₃Co₂Ge₇ to be a moderately heavy-fermion material.     

Convenient and efficient stereoselective synthesis of (2Z)-2-(chloromethyl)alk-2-enoates using iron(III) or indium(III) chloride

The stereoselective synthesis of (2Z)-2-(chloromethyl)alk-2-enoates has been achieved efficiently and in high yields and in short reaction times from Baylis-Hillman adducts, 3-hydroxy-2-methylene-alkanoates, by treatment with FeCl₃ or InCl₃ at room temperature.     

A facile approach for the synthesis of 14-aryl- or alkyl-14H-dibenzo[a,j]xanthenes under solvent-free condition

A facile, efficient and environment-friendly protocol for the synthesis of 14-aryl- or alkyl-14H-dibenzo[a,j]xanthenes has been developed by one-pot condensation of 2-naphthol with aliphatic and aromatic aldehydes in the presence of P₂O₅ or InCl₃ as catalysts under solvent-free conditions. The present approach offers the advantages of clean reaction, simple methodology, short reaction time, high yield, easy purification, and economic availability of the catalyst.     

Synthesis of nano-sized crystalline oxide ion conducting fluorite-type Y2O3-doped CeO2 using perovskite-like BaCe0.9Y0.1O2.95 (BCY) and study of CO2 capture properties of BCY

Formation of nano-sized Y₂O₃-doped CeO₂ (YCO) was observed in the chemical reaction between proton conducting Y₂O₃-doped BaCeO₃ (BCY) and CO₂ in the temperature range 700-1000 °C, which is generally prepared by wet-chemical methods that include sol-gel, hydrothermal, polymerization, combustion, and precipitation reactions. BCY can capture CO₂ of 0.13 g per ceramic gram at 700 °C, which is comparable to that of the well-known Li₂ZrO₃ (0.15 g per ceramic gram at 600 °C). Powder X-ray diffraction (PXRD), energy dispersive X-ray analysis (EDX), laser particle size analysis (LPSA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and ac impedance spectroscopy were employed to characterize the reaction product obtained from reaction between BCY and CO₂ and subsequent acid washing. PXRD study reveals presence of fluorite-like CeO₂ (a=5.410 (1) Å) structure and BaCO₃ in reaction products. TEM investigation of the acid washed product showed the formation of nano-sized material with particle sizes of about 50 nm. The electrical conductivity of acid washed product (YCO) in air was found to be about an order higher than the undoped CeO₂ reported in the literature.