Solid-state and solution photocycloadditions of 4-acyloxy-2-pyrones with maleimide

Solid-state photosensitized reactions of 4-acyloxy-2-pyrones (1b,c) with maleimide (2) afforded endo-endo double-[4+2] cycloadducts (3b,c) with high stereoselectivity. Sensitized photoreactions of 1a-d with 2 in solution gave exo-endo double-[4+2] cycloadducts (4a-d). 2-Pyrones 1a-d were photolyzed to give carboxylic acids (5a-d) via their valence isomerization in the solid state and in solution. Such kinds of photoreaction of the 4-acyloxy-2-pyrones were dramatically different from regio- and stereoselective [2+2] cycloadditions of 4-alkyloxy-2-pyrones. The photoreaction mechanisms of 1 with 2 and 1 itself were analyzed by powder X-ray diffraction analysis and MO calculations.     

Highly efficient synthesis of phenanthroquinolizidine alkaloids via Parham-type cycliacylation

A concise and efficient route involving Parham-type cycliacylation as the key step has been used to synthesize phenanthroquinolizidine alkaloids 1a-c and 2a-c. Among the products, 1b-(S), 1b-(R), 2a-(14aS,15S), 2a-(14aR,15R), and 2b were synthesized for the first time.     

Formation of bis- and tris[2]catenanes via the cross-catenation of Pd(II)- and Pt(II)-linked coordination rings

We have demonstrated the self-assembly of linear oligo[2]catenanes via selective cross-catenation. A Pd(II)-linked double looped molecule 1 was transformed into the cyclic trimer c-(1)₃ through the catenation. When 1 was treated with a kinetically inert Pt(II)-linked single looped molecule 2a in aqueous media (1:1.2 DMSO/H₂O) at room temperature, linear oligo[2]catenanes of 2a-(1)_n-2a (n=1 and 2) were selectively obtained, because the kinetically inert Pt(II)-linked ring 2a is allowed to thread on only kinetically labile Pd(II)-linked ring of 1. The distribution of the oligomers depends on the monomer ratio of 1 to 2a. When the ratio of 1 to 2a was 1:2, bis[2]catenane 3a (2a-1-2a) was quantitatively assembled. When the ratio of 1 to 2a was 1:1, not only 3a but also tris[2]catenane 4 (2a-1-1-2a) was assembled. The ratio of 3a to 4 was carefully determined to be 1:1 by NMR. The lengths of 3a and 4 in an extended conformation were estimated by MD/MM2 simulation to be 3.6 and 5.4 nm, respectively.     

An efficient microwave assisted synthesis of novel class of Rhodanine derivatives as potential HIV-1 and JSP-1 inhibitors

(Z)-5-(2-(1H-Indol-3-yl)-2-oxoethylidene)-3-phenyl-2-thioxothiazolidin-4-one (7a-q) derivatives have been synthesized by the condensation reaction of 3-phenyl-2-thioxothiazolidin-4-ones (3a-h) with suitably substituted 2-(1H-indol-3-yl)-2-oxoacetaldehyde (6a-d) under microwave condition. The thioxothiazolidine-4-ones were prepared from the corresponding aromatic amines (1a-e) and di-(carboxymethyl)-trithiocarbonyl (2). The aldehydes (6a-h) were synthesized from the corresponding acid chlorides (5a-d) using HSnBu₃.     

Cycloaddition of methyl 2-(2,6-dichorophenyl)-2H-azirine-3-carboxylate to electron-rich 2-azadienes

tert-Butyldimethylsililoxy-2-aza-1,3-butadienes react with 2H-azirine 3 leading to Diels-Alder cycloadducts in moderate yields. The reactions are endo- and regioselective with the azirine being added by its less hindered face. There is only one product in the case of 1b, 4b. There are two isomers (4 and 5) from 1a, 1c and 1d. A different result was obtained with the diene 1e. Diene 1e formed products 4e and 8. Some of compounds 4 and 5 have been hydrolysed leading to functionalised aziridines 7. Compound 8 gave aziridine 9.     

Highly efficient, multigram and enantiopure synthesis of (S)-2-(2,4′-bithiazol-2-yl)pyrrolidine

(S)-2-(4-Bromo-2,4′-bithiazole)-1-(tert-butoxycarbonyl)pyrrolidine ((S)-1) was obtained as a single enantiomer and in high yield by means of a two-step modified Hantzsch thiazole synthesis reaction when bromoketone 3 and thioamide (S)-4 were used. Further conversion of (S)-1 into trimethyltin derivative (S)-2 broadens the scope for further cross-coupling reactions.     

Efficient synthesis and applications of 2-substituted azulene derivatives: towards highly functionalized carbo- and heterocyclic molecules

An efficient synthesis of 2-substituted azulene derivatives (3-6) was accomplished from ethyl 2-oxo-2H-cyclohepta[b]furan-3-carboxylate 1 and its derivative 2, which in turn were prepared from readily available tropolone. Compounds 1 and 2 were utilized to construct densely functionalized benz[a]azulene and azulene-furan frameworks (16-25, 29-34, 37, 38).     

A simple synthesis of 4-(2-aminoethyl)-5-hydroxy-1H-pyrazoles

A simple four-step synthesis of 4-(2-aminoethyl)-5-hydroxy-1H-pyrazoles 8 (or their 1H-pyrazol-3(2H)-one tautomers 8′) as the pyrazole analogues of histamine was developed. First, enamino lactam 3 was prepared as the key intermediate in two steps from 2-pyrrolidinone (1). Next, acid-catalysed ‘ring switching’ transformations of 3 with monosubstituted hydrazines 4 gave N-[(1-substituted 5-hydroxy-1H-pyrazol-4-yl)ethyl]benzamides 7a-k and N-[2-(2-heteroaryl-3-oxo-2,3-dihydro-1H-pyrazol-4-yl)ethyl]benzamides 7′l-o. Benzamides 7a-k and 7′l-o were finally hydrolysed by heating in 6 M hydrochloric acid to furnish 1-substituted 4-(2-aminoethyl)-5-hydroxy-1H-pyrazoles 8a-k and 4-(2-aminoethyl)-2-heteroaryl-1H-pyrazol-3(2H)-ones 8′l-o in good overall yields.     

Photoinduced cycloadditions of N-methyl-1,8-naphthalenedicarboximides with alkynes

Photoinduced cycloadditions of N-methyl-1,8-naphthalenedicarboximide 1 with phenylacetylenes 2a-2c, cyclopropylacetylene 2d, diphenylacetylenes 2e-2f and 1-phenylpropyne 2g were investigated. In the case of phenylacetylenes 2a, 2b and cyclopropylacetylene 2c, photoreaction with 1 takes place at the naphthalene C(1)C(2) bond to give the cyclobutene products. For 4-methoxyphenylacetylene 1c, the cyclobutene 3c is obtained together with the 4-benzo[a]thebenidinone 4c derived from a primary oxetene product formed by [2+2] addition of the imide carbonyl with the alkyne. Similar to 2c, photocycloaddition of 1 with 2e and 2f gave the cyclobutenes 7e, 7f, 8f and the 4-benzo[a]thebenidinone products 9e, 9f and 10f, respectively, derived from the corresponding oxetenes. Photoreaction of 1 with 2g gave cyclobutene 7g and benzo[a]thebenidinone 9g. Sensitization experiment and internal heavy atom effect study showed that these reactions proceed from the ππ* singlet excited state of 1. Estimation of the free energy change for electron transfer between ¹1* and the alkynes and the calculation of charge and spin density distribution in the anion radical of 1 and the cation radical of the alkynes suggested that the cyclobutene products are formed by direct [2+2] cycloaddition of ¹1* with the alkyne, while the formation of the oxetene products is the result of electron transfer interaction between ¹1* and the alkyne. The regioselectivity in the oxetene formation is accounted for by charge and spin density distribution in the anion radical of 1 and the cation radical of the alkyne.     

Synthesis of functional Δ-1,3,5-oxazaphospholene and 2H-1,4,2-diazaphosphole complexes via catalytic ring expansion reactions of a 2H-azaphosphirene complex

Catalytically-induced ring expansion of 2H-azaphosphirene complex 1 using ferrocenium hexafluorophosphate and acetone (2), diethylketone (3), cyclohexanone (4), benzaldehyde (5) or para-hydroxy-benzaldehyde (6) furnished selectively the Δ³-1,3,5-oxazaphospholene complexes 7-11, whereas with ortho- and para-hydroxy- or ortho- and para-amino-substituted benzonitriles the 2H-1,4,2-diazaphosphole complexes 16-19 were obtained. Two further findings are noteworthy: (1) The significant decreased reaction time in the case of the sterically more demanding carbonyl derivatives 2-4 and (2) the formation of diastereomers in the case of 10 and 11 with a ratio of 8:1 and 9:1, respectively. All products were characterized by NMR, MS and elemental analysis and the configuration of complexes 7 and 10a were determined by X-ray single-crystal diffraction analysis.     

Asymmetric Michael addition using N-cinnamoyl- and N-crotonyl-trans-hexahydrobenzoxazolidin-2-ones

Preparation of N-cinnamoyl- and N-crotonyl-oxazolidin-2-ones 2 and 3 or ent-2 and ent-3 from (4S,5S)- and (4R,5R)-trans-hexahydrobenzoxazolidin-2-ones 1 or ent-1 are reported. Stereoselective copper promoted conjugated additions of Grignard reagents to chiral N-enoyl amides 2 and 3 or ent-2 and ent-3 in the presence of Zn(II) salts afforded the 1,4-addition products 4-11 and the corresponding enantiomers.     

Stabilization of (N-methyleneamino)imidoylketenes: synthesis of dipyrazolo[1,2-a;1′,2′-d][1,2,4,5]tetrazines

Thermolysis of substituted methyl 1-methyleneamino-4,5-dioxo-4,5-dihydro-1H-pyrrole-2-carboxylates 2a,b led to substituted dimethyl 3,9-dioxo-1,5,7,11-tetrahydro-1H,7H-dipyrazolo[1,2-a;1′,2′-d][1,2,4,5]tetrazine-1,7-dicarboxylates 4a,b and methyl 2,5-dihydro-5-oxo-1H-pyrazole-3-carboxylates 5a,b as minor products. The structure of compound 4a was determined by X-ray crystallography. The proposed mechanism of this conversion includes generation of (N-methyleneamino)imidoylketenes 6a,b and its intramolecular transformation to azomethine imines—5-oxo-2,5-dihydropyrazole-1-methylium-2-ides 7a,b, which undergo dimerization in head-to-tail manner yielding products 4a,b and partially hydrolyse to compounds 5a,b.     

An efficient substituent dependent synthesis of congested pyridines and pyrimidines

An efficient and versatile synthesis of various congested pyridines 3a-h, 6a,b, 8a-n, 10a-g, and 16a,b, and (pyrimidin-4-yl)acetonitriles 13a-g has been delineated by base catalyzed ring transformation of suitably functionalized 2H-pyran-2-ones 1a-h, 5, 7, and 15 by formamidine acetate 2a, acetamidine hydrochloride 2b, S-methylisothiourea 9a, pyrazol-1-yl-carboxamidine 9b, and arylamidine hydrochloride 12 separately in the presence of powdered KOH in dry DMF.     

Total Synthesis of Amphidinolide E and Amphidinolide E Stereoisomers

Four amphidinolide E stereoisomers, amphidinolide E (1), 2-epi-amphidinolide E (2), 19-epi-amphidinolide E (3), and 2-epi-19-epi-amphidinolide E (4), have been synthesized via the judicious union of aldehyde 5, allylsilanes 7 or 8, acids 9 or 10, and vinylstannane 6. The C19 stereocenters of the C19 epimeric allylsilanes 7 and 8 were introduced via crotylboration reactions early in the synthesis. [3+2] Annulation reactions of aldehyde 5 with allylsilanes 7 and 8 were employed to set the core tetrahydrofuran units of 1-4. Finally, the C2 stereocenter was installed by esterification using acid 9, without incident, or with acid 10, in which case an unexpected and completely stereoselective inversion of C2 occurs.     

Efficient and regioselective chromium(0)-catalyzed reaction of 2-substituted furans with diazo compounds: stereoselective synthesis of (2E,4Z)-2-aryl-hexadienedioic acid diesters

Pentacarbonyl(η²-cis-cyclooctene)chromium(0) (1) catalyzes efficiently reactions of diazo compounds with electron-rich furans. The reaction of 2-methoxyfuran (2) with alkyl α-diazoarylacetate (3a-g) furnishes the (2E,4Z)-2-aryl-hexadienedioic acid diesters (4a-g) in excellent yields. These reactions are highly regioselective. The cyclopropanation intermediates formed from 1 and diazo compounds 3a-g always arise from a carbene addition to the less substituted CC bond of 2. The resulting cyclopropanation product undergoes a ring opening reaction to form the corresponding (2E,4Z)-2-aryl-hexadienedioic acid diesters (4a-g). The pentacarbonylchromium(0)-catalyzed reactions of 2-alkylfuran (5a-b) with ethyl α-diazophenylacetate (3a) and 9-diazo-9H-fluorene (3h) produce the 1(E),3(E)-butadienes (6a-d) in very good yields.     

Synthesis and thermal behavior of cis- and trans-1-tert-butyl-4,5-dimethyl-2-phenyl-2-(trimethylsiloxy)-1-(trimethylsilyl)-1-silacyclohex-4-ene

The cothermolysis of benzoyl(tert-butyl)bis(trimethylsilyl)silane with 2,3-dimethylbutadiene in a sealed tube at 140 °C for 24 h afforded cis- and trans-1-tert-butyl-4,5-dimethyl-2-phenyl-2-(trimethylsiloxy)-1-(trimethylsilyl)-1-silacyclohex-4-ene (2 and 3) in a ratio of approximately 1:1 in 66% combined yield. When cis-silacyclohex-4-ene 2 was heated in a sealed tube at 250 °C for 24 h, dyotropic ring contraction took place to give 1-[(tert-butyl)(trimethylsiloxy)(trimethylsilyl)silyl]-3,4-dimethyl-1-phenylcyclopent-3-ene (4), but not trans-2-tert-butyl-4,5-dimethyl-2-phenyl-1-(trimethylsiloxy)-1-(trimethylsilyl)-1-silacyclohex-4-ene (6). The thermolysis of trans-silacyclohex-4-ene 3 under the same conditions, however, afforded two products, 1-silyl-1-phenylcyclopent-3-ene 4 and trans-1-tert-butyl-4,5-dimethyl-2-phenyl-1-(trimethylsiloxy)-2-(trimethylsilyl)-1-silacyclohex-4-ene (5). The theoretical calculations were carried out to characterize the transition states and other local minima, and to evaluate the activation energies for the dyotropic rearrangement of 2 to 4 and 6, and 3 to 4 and 5. The energy barriers between 2 and 4, between 3 and 4, and between 3 and 5 were evaluated to be 188, 191, 192 kJ mol⁻¹, respectively. The energy barrier between 2 and 6, however, was calculated to be 201 kJ mol⁻¹ or higher. These results are consistent with the experimental finding that the thermal isomerization of 2 affords only 4, but 3 produces both 4 and 5.     

Facile synthesis of 4-phenylquinolin-2(1H)-one derivatives from N-acyl-o-aminobenzophenones

An efficient synthesis of 4-phenylquinolin-2(1H)-one derivatives has been achieved in a one-pot reaction from N-acyl-o-aminobenzophenones 1a-c (a: acyl=acetyl; b: acyl=propanoyl; c: acyl=heptanoyl) using NaH as a base. Treatment of 1 with NaH provided the quinolones 2a-c with 62-83% yields, whereas the reaction in the presence of alkyl iodide (alkyl=methyl, ethyl, n-octyl) gave the corresponding N-alkylated quinolones 3a-g in 75-95% yields. The alkylation reaction of 4-phenylquinolin-2(1H)-one 2a with alkyl halide gave a mixture of N-alkylated and O-alkylated products. Comparison of IR and NMR data of the N-alkylated and O-alkylated compounds with those of 2a-c indicated that 2a-c exist as the lactam form.     

Dimolybdenum complexes containing anions of N,N′-bis(pyrimidine-2-yl)formamidine and N-(2-pyrimidinyl)formamide

The reactions of Mo₂(O₂CCH₃)₄ with different equivalents of N,N′-bis(pyrimidine-2-yl)formamidine (HL1) and N-(2-pyrimidinyl)formamide (HL2) afforded dimolybdenum complexes of the types Mo₂(O₂CCH₃)(L1)₂(L2) (1) trans-Mo₂(L1)₂(L2)₂ (2) cis-Mo₂(L1)₂(L2)₂ (3) and Mo₂(L2)₄ (4). Their UV–Vis and NMR spectra have been recorded and their structures determined by X-ray crystallography. Complexes 2 and 3 establish the first pair of trans and cis forms of dimolybdenum complexes containing formamidinate ligands. The L1 ligands in 1–3 are bridged to the metal centers through two central amine nitrogen atoms, while the L2 ligands in 1–4 are bridged to the metal centers via one pyrimidyl nitrogen atom and the amine nitrogen atom. The Mo–Mo distances of complexes 1 [2.0951(17) Å], 2 [2.103(1) Å] and 3 [2.1017(3) Å], which contain both Mo?N and Mo?O axial interactions, are slightly longer than those of complex 4 [2.0826(12)–2.0866(10) Å] which has only Mo?O interactions.     

Novel alkaloids, paxdaphnines A and B with unprecedented skeletons from the seeds of Daphniphyllum paxianum

Two novel Daphniphyllum alkaloids with unprecedented skeletons, namely paxdaphnines A (1) and B (2), have been isolated from the seeds of Daphniphyllum paxianum. Paxdaphnine A (1) is a 19-nor-Daphniphyllum alkaloid with highly caged skeleton, and paxdaphnine B (2) is the first 1,19-bisnor-Daphniphyllum alkaloid. The relative structures of 1 and 2 were elucidated by spectral methods, and their unique biosynthetic pathway postulated. The absolute structure of 1 was determined by X-ray diffraction of the iodide derivative (1a) of 1, and the absolute stereochemistry of 2 was proposed by correlation with the biosynthetic pathway for 1.     

New reaction of ethenetetracarbonitrile with N-arylisoindolines

N-Arylisoindolines 1a-i react with ethenetetracarbonitrile 2 in aerated benzene by formation of [3-(2-aryl-3-dicyanomethylene-2,3-dihydro-1H-isoindol-1-ylidene)-2-aryl-2,3-dihydro-1H-isoindol-1-ylidene]propanedinitriles 8a-i (20-36%), N-aryl-3-dicyanomethylene-isoindol-2-ones 9a-i (15-21%) and N-arylphthalimides 10a-i (4-9%) as well as 1,1,2,2-tetracyanoethane 11 (35-55%). The structure of 8d has been unambiguously confirmed by a single crystal X-ray structure analysis. A rationale for the formation of products 8-11 is presented.