Aminothiazoles and aminothiadiazoles as nucleophiles in aminocarbonylation of iodobenzene derivatives

Various 2-, 3- and 4-substituted iodobenzenes were aminocarbonylated using aminothiazole and aminothiadiazole derivatives in palladium-catalysed reaction. The reaction is chemospecific toward the corresponding carboxamides. Consequently, the application of the above N-nucleophiles provided the N-1,3-thiazol-2-yl- and N-1,3,4-thiadiazol-2-ylcarboxamides in moderate to high yields. Due to the facile work-up of the reaction mixture isolated yields of 90% or higher were obtained in most cases.     

Efficient synthesis of N,N′-dialkyl-N″-dialkylaminocarbothioyl thioureas from cyclic secondary amines, CS2, and N,N′-dialkyl carbodiimides in water

A mild, convenient, and practical one-pot procedure for direct synthesis of N,N′-dialkyl-N″-dialkylaminocarbothioyl thioureas is described via three-component reaction of cyclic secondary amines, CS₂, and N,N′-dialkyl carbodiimides in water at room temperature.     

Palladium-catalysed aminocarbonylation of iodoarenes and iodoalkenes with aminophosphonate as N-nucleophile

The high-yielding synthesis of novel N-acyl phosphonates with unprecedented structure was carried out by a homogeneous carbonylation reaction under mild reaction conditions. The palladium-catalysed aminocarbonylation of iodoalkenes (1-iodo-cyclohexene, 1-iodo-4-tert-butyl-cyclohexene, 1-iodo-2-methyl-cyclohexene and α-iodostyrene) with diethyl α-aminobenzyl-phosphonate as N-nucleophile resulted in the exclusive formation of carboxamides. The same reaction with iodoaromatics (iodobenzene, 2-iodothiophene) provided the corresponding carboxamide in high yields and some 2-keto-carboxamides as side products due to single and double carbon monoxide insertion, respectively.     

An efficient one-pot access to trithiocarbonate-tethered peptidomimetics

A simple protocol for the synthesis of a new class of trithiocarbonate-linked peptidomimetics and neoglycosylated amino acids is described. N-Protected amino alkyl thiols were treated with CS₂ in the presence of triethylamine (TEA) to generate trithiocarbonate salt, which upon reaction with appropriate halides afforded dipeptidomimetics in good yields. Further, the procedure was also extended for the synthesis of N,N′-orthogonally protected trithiocarbonate-linked dipeptidomimetics.     

High-yielding synthesis of 1-isoindolinone derivatives via palladium-catalysed cycloaminocarbonylation

1-Isoindolinone derivatives were synthesised in high yields (up to 89%) by using 2-iodobenzyl bromide and 2-iodobenzylamine as bifunctional substrates in palladium-catalysed carbonylation. Depending on the N-nucleophiles, two types of compounds were synthesised with 2-iodobenzyl bromide: the use of primary amines, including amino acid methylesters, resulted in the formation of N-substituted 1-isoindolinones, while secondary amines react both with the benzyl bromide and iodoarene moieties resulting in the corresponding ortho-(N-piperidino/morpholinomethyl)-benzamides. The parent 1-isoindolinone was obtained in a facile, highly chemoselective intramolecular aminocarbonylation of 2-iodobenzylamine. The mechanistic details of the ring-closure reaction and the conditions leading to side-products are discussed as well.     

Synthesis of oxindoles via Cu-mediated reactions between N-phenylacrylamides and ethyl 2-bromo-2-methylpropionate

A novel way of synthesizing alkylated oxindoles via Cu-mediated atom transfer radical addition reaction between N-phenylacrylamides and ethyl 2-bromo-2-methylpropionate has been described. It was found that the use of N,N,N′,N′-1,1,2,2,-tetramethylethylenediamine as ligand was important for achieving good yields. Additionally, the use of DMSO as solvent and running the reaction at 130?°C were also crucial. In some cases, the product can be further brominated when the reaction temperature was raised to 150?°C.     

Electrocatalytic reduction of carbon dioxide by a polymeric film of rhenium tricarbonyl dipyridylamine

A dipyridylamine ligand with a pendant pyrrole (N-(3-N,N′-bis(2-pyridyl)propylamino)pyrrole, PPP) and its corresponding rhenium(I) complex, Re(CO)₃(κ²-N,N-PPP)Cl, were synthesized. The structure of Re(CO)₃(κ²-N,N-PPP)Cl was determined by X-ray crystallography. Electrochemical polymerization of the pyrrole moiety resulted in the immobilization of poly[Re(CO)₃(κ²-N,N-PPP)Cl] film onto a glassy carbon electrode, which exhibited electrocatalytic activity for the reduction of CO₂ to CO.     

A simple approach for the synthesis of new classes of dithiocarbamate-linked peptidomimetics

An efficient protocol for the synthesis of a new series of dithiocarbamate-linked peptidomimetics is described. The in situ generated dithiocarbamic acid intermediate formed by the reaction of an amino acid ester and carbon disulfide in the presence of triethylamine was treated with N-protected amino alkyl iodide to afford title compounds 3a-g in good to moderate yields. The synthesis of N-Fmoc-protected tripeptidomimetics 4a-e containing two dithiocarbamate linkages is also described. The protocol was further extended to synthesize N,N′-orthogonally protected dithiocarbamate-linked dipeptidomimetics 7a-c as well. The mild reaction conditions and non-toxic reagents are the advantages of the present method.     

Facile synthesis of 1,8-naphthalimides in palladium-catalysed aminocarbonylation of 1,8-diiodo-naphthalene

1,8-Diiodo-naphthalene was aminocarbonylated with various primary and secondary amines in the presence of palladium(0) complexes formed in situ from palladium(II) acetate and triphenylphosphine. In the case of primary amines, depending on the amine to substrate ratio, two types of products have been obtained in highly chemoselective reaction: dicarboxamides and N-substituted imides have been formed at high and low amine to substrate ratio, respectively. The reaction tolerates the ester functionality, so that amino acid esters could serve as N-nucleophiles and in this way, naphthalimides possessing stereogenic centre in the N-substituent could be synthesised.     

Synthesis of tetrahydrophthalazine and phthalamide (phthalimide) derivatives via palladium-catalysed carbonylation of iodoarenes

1,2,3,4-Tetrahydrophthalazin-1-one and 1,2,3,4-tetrahydrophthalazin-1,4-dione derivatives were synthesised in high (up to 85%) and low yields using 2-iodobenzyl bromide and 1,2-diiodobenzene as bifunctional substrates, respectively. Iodoarenes, carbon monoxide and various hydrazine derivatives as N-nucleophiles were used in a three-component palladium-catalysed cascade hydrazinocarbonylation. A similar palladium-catalysed reaction, the aminocarbonylation of 1,2-diiodobenzene, resulted mainly in the formation of two types of major products depending on the amine N-nucleophiles: the use of primary amines yielded N-substituted phthalimides in double carbonylation, while secondary amines react with one of the iodoarene functionalities affording the corresponding 2-iodobenzamides. Due to double carbon monoxide insertion at one or both iodoarene functionalities, ketocarboxamide-carboxamide or bis-ketocarboxamide derivatives could be isolated by the modification of the reaction conditions. Some mechanistic details of the ring-closure reactions and the conditions leading to side-products are also discussed.     

Selective permeation of CO2 through poly 2-(N,N-dimethyl)aminoethyl methacrylate membrane prepared by plasma-graft polymerization technique

A membrane having an amine moiety was prepared by plasma-grafting 2-(N,N-dimethyl)aminoethyl methacrylate (DAMA) onto a microporous polyethylene substrate. Permselectivity of the membrane for CO₂ over N₂ was achieved in both dry and water swollen conditions. When the CO₂ partial pressure in the feed gas was 0.047 atm, the selectivity of CO₂ over N₂ reached 130 for the highly swollen water containing membrane. This value was found to agree with that obtained with a mobile carrier membrane (supported liquid membrane) using DAMA as the carrier. The effects of several experimental conditions such as degree of grafting, feed partial pressure and temperature on the membrane performance were studied. It was suggested that the membrane acted as a fixed carrier membrane for CO₂ facilitated transport in under the dry condition and acted as a fixed reaction site membrane in the water swollen condition. The carrier transport mechanism is discussed for dry and aqueous membranes.     

Smartphone-based colorimetric determination of glucose in food samples based on the intrinsic peroxidase-like activity of nitrogen-doped carbon dots obtained from locusts

In this study, nitrogen-doped carbon dots (N-CDs) with excellent peroxidase-like activity were prepared using locust powder as the carbon source by a self-exothermic reaction. The obtained N-CDs could catalyze the oxidation of the chromogenic substrate 3,3′,5,5′-tetramethylbenzidine (TMB) in the presence of H₂O₂ to generate a blue oxidized product (TMB_ox) with a maximum absorption peak at 654 nm. The catalytic reaction conditions were optimized; furthermore, steady-state kinetic analysis indicated that N-CDs exhibited high affinity toward both TMB and H₂O₂, and the Michaelis-Menten constant (k_m) values were 0.115 mM (TMB) and 0.764 mM (H₂O₂). A smartphone-based colorimetric method was developed for quantitative detection. The 1/L values (L stands for lightness in HSL color space) of the TMB_ox solution were recorded via an iPhone application Color Analyzer. Since H₂O₂ is the by-product of glucose (Glu) oxidation in the presence of glucose oxidase (GOx), a simple, sensitive, and selective smartphone-based colorimetric method was developed for the determination of Glu, and the detection limit was 1.09 μM. The smartphone-based method was successfully applied to determine Glu in different food samples with recoveries in the range of 88.5–109.0 %.     

Carbon nanotubes and fullerene in the solution polymerisation of acrylonitrile

The radical activity of single wall carbon nanotubes (SWCNT) and fullerene C₆₀ in the radical polymerisation of acrylonitrile (AN) in N,N-dimethylformamide (DMF) initiated by 2,2′-azobis[2-methyl-ω-hydroxy-oligo(oxyethylene) propionate] [AIB-OOE(4 0 0)] and 2,2′-azoisobutyronitrile (AIBN) at 333 K was investigated in situ using a dilatometric method. The carbonaceous substances were sonicated in DMF before the polymerisation. The changes in the process proceeding in the presence of SWCNT and C₆₀ in a comparison to the course of AN polymerisation without the participation of carbonaceous substances (the decrease of the reaction rate, the induction time) indicated on the inhibition effect, which can be described quantitatively using the inhibition parameter F. Single wall carbon nanotubes were found to act as retarders whereas fullerene C₆₀ as an inhibitor in the AN polymerisation. The changes in the chemical structure of products reveal that the carbon nanotubes and fullerenes are chemically bonded with the polymer.     

Synthesis of N-picolylcarboxamides via palladium-catalysed aminocarbonylation of iodobenzene and iodoalkenes

A systematic investigation of the palladium-catalysed aminocarbonylation of iodobenzene, 1-iodocyclohexene and 1′-iodostyrene in the presence of N-nucleophiles containing pyridyl moieties (2-, 3- and 4-picolylamine, N-ethyl-4-picolylamine, di-(2-picolyl)amine) was carried out. The two types of iodo substrates differ substantially regarding the selectivity towards carbonylation: while the aminocarbonylation of iodobenzene resulted in the formation of carboxamide and ketocarboxamide mixtures under various conditions, with the predominant formation of ketocarboxamide even at low carbon monoxide pressure, the aminocarbonylation of iodoalkenes under same conditions gave the corresponding unsaturated carboxamide exclusively. Most of the carboxamides and phenylglyoxylamides, obtained via single and double carbon monoxide insertion, respectively, were isolated in yields of synthetic interest (up to 86%). Low reaction rates and unexpected chemoselectivity towards carboxamide formation have been observed with di-(2-picolyl)amine as N-nucleophile in the aminocarbonylation of iodobenzene.     

Isocyanide based multicomponent reactions of oxazolidines and related systems

N-Alkyloxazolidines react in a multicomponent reaction with carboxylic acids and isocyanides to give N-acyloxyethylamino acid amides. The previously reported reaction conditions were improved using a design of experiments approach (DoE). Under the optimised conditions, good yields of the N-acyloxyethylamino acid amide products are obtained both via a three- or four-component approach from N-alkylethanolamines, aldehydes/ketones, isocyanides and carboxylic acids. The reaction of oxazolidines without a nitrogen substituent was found to give either the expected Ugi products or the N-acyloxyethylamino acid amides depending on the choice of reaction conditions. Optimised reaction conditions were also developed for the ring-expansion of oxazolidines to morpholin-2-ones via reaction with an isocyanide followed by hydrolysis. The mechanistic pathway of the multicomponent reaction was briefly investigated using an ¹⁸O labelling experiment. The carboxylic acid component can be replaced by a range of other acidic nucleophiles including thiobenzoic acid, thiophenol or 5-phenyltetrazole, which are incorporated via an alternative pathway. These latter reactions can also be applied to 2-aminotetrahydrofurans, 2-aminotetrahydropyrans or 4-hydroxybut-2-one, further extending the structural diversity of the multicomponent reaction products.     

Reaction of N,N-diarylamidines with 3,4,5,6-tetrachloro-1,2-benzoquinone

A synthesis of 5,11b-dihydro-1H-dibenzo[d,f][1,3]diazepin-1-ones was found in the reaction of nitro-substituted N¹,N²-diarylamidines with 3,4,5,6-tetrachloro-1,2-benzoquinone. In contrast, 6,7,8,9-tetrachlorodibenzodioxins were obtained from reaction of N¹,N²-diphenylpropionamidine and N¹,N²-di-(4-tert-butylphenyl)acetamidine with 3,4,5,6-tetrachloro-1,2-benzoquinone.     

One-pot synthesis of imidazolines from aldehydes: detailed study about solvents and substrates

Imidazolines were prepared in one-pot operation from aldehydes and diamines through oxidation of aminal intermediates by NBS. This method could be applied to various aromatic and aliphatic aldehydes and N-nonsubstituted and N-monosubstituted 1,2-diamines. Furthermore, it was found that CH₂Cl₂ could be altered to TBME, a more environmentally friendly solvent, in the reaction using N-nonsubstituted 1,2-diamines. The reaction conditions were very mild and chemoselective.     

Tetrahydroquinoline syntheses induced with catalytic amounts of viologen additives

The viologen N,N′-dicyanomethyl-4,4′-bipyridinium·2PF₆ was found to induce an aza-Diels-Alder reaction of N-arylimines with N-vinylpyrrolidinone or N-vinylcarbazole, producing tetrahydroquinoline derivatives with high cis/trans selectivities and yields.     

Synthesis of 4-substituted pyrano[4,3-b]pyran-2,5-diones in an ionic liquid

The mildly basic ionic liquid N,N,N,N-tetramethylguanidinium triflate (TMGTf) was found to be a very effective solvent for the reaction between 4-hydroxy-6-methyl-2H-pyran-2-one, Meldrum's acid, and aldehydes to afford some novel pyrano[4,3-b]pyran-2,5-diones in high yields at room temperature. The stages, through which these reactions might proceed, depend largely on the nature of the aldehyde substrates. The reaction of aliphatic aldehydes has given access to some novel carboxylated products.     

[4+1] Cycloaddition of N-acylimine derivatives with isocyanides: efficient synthesis of 5-aminooxazoles and 5-aminothiazoles

[4+1] Cycloaddition reaction between isocyanides and N-acylimine derivatives generated from N-acyl N,O-acetals acting as isocyanophiles has been developed. These reactions proceeded smoothly and cleanly to afford the corresponding 5-aminooxazoles in high yields. This reaction was extended to the syntheses of 5-aminothiazoles by using N-thioacyl N,O-acetals. A wide range of N-acyl N,O-acetals, N-thioacyl N,O-acetals, and isocyanides were found to be applicable to this reaction.