Singlet-triplet energy separations in divalent five-membered cyclic conjugated C5H3X, C4H3SiX, C4H3GeX, C4H3SnX, and C4H3PbX (X = H, F, Cl, and Br)

Singlet-triplet energy gaps in cyclopenta-2,4-dienylidene, as well as its 2- or 3-halogenated derivatives, are compared and contrasted with their sila, germa, stana, and plumba analogues; at HF/6-31G* and B3LYP/ 6-311++G(3df, 2p) levels of theory. Energy gaps (ΔG_t-s), between triplet (t) and singlet (s) states, appear linearly proportional to: (i) the size of the group 14 divalent element (M = C, Si, Ge, Sn and Pb), (ii) the angle ∠C-M-C, and (iii) the ΔG_(LUMO-HOMO) of the singlet state involved. The magnitude of ΔG_t-s, for each 2- and/or 3-substituted species studied, increases with an order of: carbenes < silylenes < germylenes < stanylenes < plumbylenes. This order reverses for the barriers of the ring puckering. The puckering occurs with more ease for every singlet, compared to its corresponding triplet form.Regardless of the group 14 element (M) employed, every 3-halo-substituted species is more stable than the corresponding 2-halo-substituted isomer. For M = Pb, Sn and/or Ge; 3-halo-substituted species have higher ΔG_t-s than their corresponding 2-halo-substituted analogues. For M = Si, similar ΔG_t-s are found for 2- and 3-halogenated isomers. For M = C, 3-halo-substituted species have lower ΔG_t-s than their corresponding 2-halo-substituted analogues.Every cyclic singlet has a larger ∠C-M-C angle, than its corresponding cyclic triplet state, except for 3-halosilacyclopenta-2,4-dienylidenes where triplet has a larger ∠C-M-C angle than its corresponding singlet state.     

Cu-Ni/La2O3热解C2H2制备碳纳米管的研究

Nano-sized and well-dispersed Cu-Ni/La₂O₃ can be obtained by reduction of LaCu_0.2Ni_0.8O₃ with the structure of perovskite. Using Cu-Ni/La₂O₃ as catalyst and C₂H₂ as carbon source, carbon nanotubes with a high yield and narrow diameter distribution can be obtained in the reaction temperature range of 650～700℃. Outer diameter of carbon nanotubes rangs from 9nm to 14nm. TG, Raman and XPS analysis indicate that carbon nanotubes prepared by Cu-Ni/La₂O₃ are relatively higher in graphitic degree.     

Electron impact study of C6H5+ fragment ion obtained from three molecules

C₆H₅ ⁺ fragment ion produced from toluene,n-propylbenzene and acetophenone have been studied using an electron impact technique. The ionization efficiency data have been treated by the inverse convolution first differential technique. First and higher appearance energies for ions produced from the three precursors are reported. The heats of formation for the ions obtained at threshold from the three molecules are calculated     

Cu-Fe-PILC催化C3H6选择性还原NO的性能

采用羟基铁离子柱撑Na-Mont制备出1.0Fe-PILC,通过超声浸渍法合成不同铜负载量的nCu-Fe-PILC,并测试了其在富氧条件下催化C_3H_6选择性催化还原NO的性能。通过N_2吸附脱附、XRD、UV-Vis、H_2-TPR、Py-FTIR等技术手段表征催化剂的微观结构和物化性质,进一步解释其催化反应机理。结果表明,Cu的引入提高了1.0Fe-PILC的中低温活性和抗水硫能力。其中9Cu-Fe-PILC在300℃时NO转化率可达69.8%以上,400℃后NO转化率保持在99%以上且水硫影响较小。XRD、N_2吸附脱附结果表明,催化剂的SCR活性与所负载的活性组分和催化剂的吸附能力有关。UV-Vis结果表明,9Cu-Fe-PILC具有较强的中低温活性,与其含有较多的游离态Cu~(2+)有关。H_2-TPR结果表明,与1.0Fe-PILC相比,经Cu修饰的nCu-Fe-PILC获得了中低温还原能力。Py-FTIR结果表明,nCu-Fe-PILC表面同时含有Lewis酸和Br?nsted酸,Lewis酸是影响催化剂SCR活性的主要因素。     

一步水热合成Cu-SSZ-13分子筛选择性催化C3H6还原NO

采用铜胺配合物(Cu²⁺-四乙烯五胺,Cu-TEPA)作为结构导向剂,通过一步水热法合成不同铜铝比(n_Cu/n_Al)和硅铝比(n_Si/n_Al)的Cu-SSZ-13分子筛催化剂,研究其在贫燃条件下丙烯选择性催化还原NO(C₃H₆-SCR)的性能。当n_Cu/n_Al=2、n_Si/n_Al=6时2.0Cu-SSZ-13(6)催化剂具有最好的低温脱硝活性,200℃时NO转化率超过80%,在250~300℃可实现100%脱硝效率和~100%N₂选择性,同时具有较强的抗水、抗硫性能。为研究不同n_Cu/n_Al和n_Si/n_Al对催化剂物理化学特性的影响,通过X射线衍射(XRD)、扫描电子显微镜(SEM)、N₂吸附-脱附测试、H₂程序升温还原(H₂-TPR)、氨气程序升温脱附(NH₃-TPD)、紫外可见光谱(UV-Vis)等手段对样品进行表征。结果表明,2.0Cu-SSZ-13(6)具有最佳的脱硝性能,这是因为其具有最大的比表面积、最强的表面酸性和分布最多的孤立态Cu²⁺离子。Cu-SSZ-13上丰富的酸性位可以有效促进C₃H₆和NO的吸附和活化,SSZ-13分子筛八元环中孤立的Cu²⁺离子具有良好的氧化还原性能,是C₃H₆-SCR反应的主要活性位。随着n_Cu/n_Al的增加,孤立的Cu²⁺离子会在分子筛表面迁移、集聚形成CuO物种,从而导致C₃H₆-SCR活性下降。     

Vibrational spectra of cyclooctatetraenyl alkali metal complexes [C8H8M2 (M = Na, K)]: A theoretical study

The cyclooctatetraenyl dianion (C₈H₈²⁻) π-conjugated system forms a stable complex system with alkali and some transition metals. The results of vibrational analysis for C₈H₈M₂ (M = Na, K) complexes were reported here. The geometries of C₈H₈M₂ (M = Na, K) were optimized using ab initio (HF, MP2, CCSD(T)) and DFT (B3LYP) methods with 6-311G** and 6-311++G** basis sets and the harmonic frequencies were obtained. To reproduce and compare with the experimental values the structurally similar molecules C₅H₅M (M = Na, K) and benzene were studied. The scale factors obtained from these systems were applied to predict the experimental frequencies of C₈H₈M₂ (M = Na, K). The force field and vibrational spectra are analyzed and the most probable assignments are proposed for all the fundamentals based on the potential energy distribution.     

Conversion of NO in NO/N2, NO/O2/N2, NO/C2H4/N2 and NO/C2H4/O2/N2 Systems by Dielectric Barrier Discharge Plasmas

An experimental study on the conversion of NO in the NO/N₂, NO/O₂/N₂, NO/C₂H₄/N₂ and NO/C₂H₄/O₂/N₂ systems has been carried out using dielectric barrier discharge (DBD) plasmas at atmospheric pressure. In the NO/N₂ system, NO decomposition to N₂ and O₂ is the dominating reaction; NO conversion to NO₂ is less significant. O₂ produced from NO decomposition was detected by an on-line mass spectrometer. With the increase of NO initial concentration, the concentration of O₂ produced decreases at 298 K, but slightly increases at 523 K. In the NO/O₂/N₂ system, NO is mainly oxidized to NO₂, but NO conversion becomes very low at 523 K and over 1.6% of O₂. In the NO/C₂H₄/N₂ system, NO is reduced to N₂ with about the same NO conversion as that in the NO/N₂ system but without NO₂ formation. In the NO/C₂H₄/O₂/N₂ system, the oxidation of NO to NO₂ is dramatically promoted. At 523 K, with the increase of the energy density, NO conversion increases rapidly first, and then almost stabilizes at 93–91% of NO conversion with 61–55% of NO₂ selectivity in the energy density range of 317–550 J L⁻¹. It finally decreases gradually at high energy density. A negligible amount of N₂O is formed in the above four systems. Of the four systems studied, NO conversion and NO₂ selectivity of the NO/C₂H₄/O₂/N₂ system are the highest, and NO/O₂/C₂H₄/N₂ system has the lowest electrical energy consumption per NO molecule converted.     

Reactions of chlorofullerene C60Cl6 with N-substituted piperazines

It was shown for the first time that reactions of C₆₀ halides with aliphatic amines provide a facile route for the synthesis of aminofullerenes, valuable precursors for water-soluble cationic fullerene derivatives. Particularly, chlorofullerene C₆₀Cl₆ and N-substituted piperazines were investigated in this work. It was shown that substitution of chlorine atoms in C₆₀Cl₆ by amine groups is accompanied by partial elimination of addends from the fullerene cage that yields mixtures of di-, tetra- and, hexaaminofullerenes as the final products. Separation of these mixtures by column chromatography resulted in isolation of pure 1,4-diaminofullerenes; this procedure gives much higher and more reproducible yields of these compounds than direct oxidative photoaddition of secondary amines to C₆₀. ESI mass spectrometry and NMR spectroscopy data showed that hexaaminofullerene isomers are major components in inseparable mixtures of polyaddition products. Polyaminofullerenes were found to be readily soluble in aqueous acids; these solutions are unstable because of a facile substitution of protonated amine groups with hydroxyls. Nevertheless, the use of other amine substrates in the investigated reaction can potentially allow the preparation of more stable water-soluble cationic fullerene derivatives for biological studies.     

复合催化剂上CO2加氢合成C2烃类

介绍了由CO₂+H₂合成C2⁺烃的几种复合催化剂体系的研究进展，比较和评价了复合催化剂体系的活性和选择性及对C2⁺烃类生成的影响。着重于复合催化剂体系对C4⁺烃的生成及产物分布的影响并简述反应机理。     

Catalytic oxidation of CO and C6H6 on alumina-supported Cu-Cr and Co-Cr oxide catalysts in the presence of ozone

The activity of alumina-supported Cu-Cr and Co-Cr oxide catalysts in CO and C₆H₆ oxidation with both molecular and ozone-enriched oxygen was studied. It was proved that the use of ozonized oxygen leads to a considerable decrease of the reaction temperatures.     

Synthesis and characterization of three new fluorovanadate complexes: N(C2H5)4[VOF4], N(CH3)4[VOF3Cl], N(C4H9)4[VOF3Br] and theoretical calculations of VOF4, VOF3Cl and VOF3Br ions

The reaction of VOF₃ with (C₂H₅)₄NF, (CH₃)₄NCl and (C₄H₉)₄NBr salts in anhydrous CH₃CN produced new complexes with the anion general formula [VOF₃X]⁻ in that (X = F⁻, Cl⁻, Br⁻). These were characterized by elemental analysis, IR, UV/Visible and ¹⁹F NMR spectroscopy. The optimized geometries and frequencies of the stationary point are calculated at the B3LYP/6-311G level of theory. Theoretical results showed that the VX (X = F, Cl, Br) bond length values for the [VOF₃X]⁻ in compounds 1-3 are 1.8247, 2.4031 and 2.5595 Å, respectively. Also, the VF₅ bond length values in [VOF₃X]⁻ are 1.824, 1.812 and 1.802 Å, respectively. These results reveal that the bond order for VX bonds decrease from compounds 1 to 3, while for VF₅ bonds, the bond orders increase. It can be concluded that the decrease of VX bonds lengths and the increase of VF₅ bond lengths in compounds 1-3 result from the increase of the hyperconjugation from compounds 1 to 3. Harmonic vibrational frequencies and infrared intensities for VOF₄⁻, VOF₃Cl⁻ and VOF₃Br⁻ are studied by means of theoretical and experimental methods. The calculated frequencies are in reasonable agreement with the experiment values. These data can be used in models of phosphoryl transfer enzymes because vanadate can often bind to phosphoryl transfer enzymes to form a trigonal-bipyramidal structure at the active site.     

添加C10H10Cl2Ti对6LiBH4-CaH2-3MgH2体系储氢性能的影响

C_(10)H_(10)Cl_2Ti的添加可以有效改善6LiBH_4-CaH_2-3MgH_2样品吸放氢性能,添加的质量分数为5%时具有较好的催化效果。样品的起始和终止放氢温度比原始样品分别降低约30和25℃,可逆储氢量(质量分数)约为8.1%。添加C_(10)H_(10)Cl_2Ti催化剂的样品在360℃下等温放氢速率比原始样品提高了178%。两步放氢反应的表观活化能分别为131.4和138.8 kJ·mol~(-1),相比原始样品降低了约18.6%和15.8%。利用X射线光电子能谱(X-ray photoelectron spectroscopy,XPS)对样品进行分析发现,热分解过程中C_(10)H_(10)Cl_2Ti生成了多价态的Ti化合物,催化了LiBH_4与CaH_2的反应,从而改善了复合体系的储氢性能。     

(C5H5FeS1,55)4: Ein neuartiger vierkerniger Fe-S-Cluster in einer (C5H5FeS)4-Matrix

Ohne Zusammenfassung

---

(C₅H₅FeSi_1.5)₄: A new quadrinuclear Fe-S cluster in a (C₅H₅FeS)₄ matrix

     

载有C60的TiO2纳米粒子光催化活性

以水溶性C₆₀和TiO₂粒子为前驱体,采用水热法制备了载有C₆₀的锐钛矿型TiO₂纳米粒子。应用X射线衍射、透射电子显微镜、红外光谱、紫外-可见漫反射光谱、荧光光谱对产物进行了表征。以对-硝基苯酚为模型污染物研究了产物的光催化活性,结果表明适量负载C₆₀可以提高TiO₂纳米粒子的光催化活性,C₆₀起着传输电子、促进TiO₂光生载流子分离的作用,且经7次循环使用后对-硝基苯酚的降解效率仍能达到74%。讨论了载有C₆₀的TiO₂纳米粒子光催化降解对-硝基苯酚的机理。     

C2H6 scattering from LiF(0 0 1): Influence of the molecular anisotropy on rainbow scattering in both intensity and speed distributions

We have measured the angle-resolved intensity and speed distributions of C₂H₆ scattered from LiF(0 0 1) along the [1 0 0] azimuthal direction, the largest structural corrugation direction, to investigate the effect of the molecular anisotropy on the gas–surface interaction at the corrugated surface. While clear rainbow feature is observed in the mean energy angular distribution, no rainbow feature is detected in the intensity angular distribution. From the comparisons of the obtained results to the calculated predictions based on the simple classical theory of the ellipsoid-washboard model, the effect of the molecular anisotropy is found to play a crucial role in the rainbow feature. With an increase in the extent of the molecular anisotropy such as that of C₂H₆ as compared with rare gas atoms, the integration of the intensity angular distributions for various molecular orientations results in the smearing of the rainbow feature on the corrugated surface. The rainbow scattering in the mean energy angular distribution, however, is not completely smeared out.     

Syntheses, crystal structures and Raman spectra of Ba(BF4)(PF6), Ba(BF4)(AsF6) and Ba2(BF4)2(AsF6)(H3F4); the first examples of metal salts containing simultaneously tetrahedral BF4 and octahedral AF6 anions

In the system BaF₂/BF₃/PF₅/anhydrous hydrogen fluoride (aHF) a compound Ba(BF₄)(PF₆) was isolated and characterized by Raman spectroscopy and X-ray diffraction on the single crystal. Ba(BF₄)(PF₆) crystallizes in a hexagonal space group with a=10.2251(4) Å, c=6.1535(4) Å, V=557.17(5) Å³ at 200 K, and Z=3. Both crystallographically independent Ba atoms possess coordination polyhedra in the shape of tri-capped trigonal prisms, which include F atoms from BF₄⁻ and PF₆⁻ anions. In the analogous system with AsF₅ instead of PF₅ the compound Ba(BF₄)(AsF₆) was isolated and characterized. It crystallizes in an orthorhombic Pnma space group with a=10.415(2) Å, b=6.325(3) Å, c=11.8297(17) Å, V=779.3(4) Å³ at 200 K, and Z=4. The coordination around Ba atom is in the shape of slightly distorted tri-capped trigonal prism which includes five F atoms from AsF₆⁻ and four F atoms from BF₄⁻ anions. When the system BaF₂/BF₃/AsF₅/aHF is made basic with an extra addition of BaF₂, the compound Ba₂(BF₄)₂(AsF₆)(H₃F₄) was obtained. It crystallizes in a hexagonal P6₃/mmc space group with a=6.8709(9) Å, c=17.327(8) Å, V=708.4(4) Å³ at 200 K, and Z=2. The barium environment in the shape of tetra-capped distorted trigonal prism involves 10 F atoms from four BF₄⁻, three AsF₆⁻ and three H₃F₄⁻ anions. All F atoms, except the central atom in H₃F₄ moiety, act as μ₂-bridges yielding a complex 3-D structural network.     

C60 and carbon: a postbuckminsterfullerene perspective

The discovery of the fullerenes and nanotubes has completely changed our perspective on various aspects of carbon chemistry and materials science in quite fundamental ways. The experiments, which uncovered C₆₀, occurred between 1985 and 1990 and there are lessons to be learned of various kinds over the way scientific advances occur and more importantly the way misconceptions can propagate. For instance much of our received wisdom over the behaviour of carbon, in particular graphite on a microscopic scale, was really quite ill-conceived and certainly misleading. Questions might be asked as to why it took almost till the end of the 20th century for the fact to be uncovered that the elegant C₆₀ molecule had been lurking in the dark shadows of soot chemistry all the time. After all, mass spectrometric techniques were sufficiently advanced for the discovery to have been made in the 1960’s—perhaps even earlier. Some of these issues are addressed here and the discussion gives an insight into the curiously unpredictable way fundamental scientific advances sometimes occur and also highlights the limitations of applied research in this case.     

Ge2H2 a π-ligand in organometallic chemistry

η² π-Complexes of Ge₂H₂ with the organometallic fragments V(PH₃)₂(I)(CO)₂, Cr(CO)₄, Co(PH₃)₂(Cl) and M(PH₃)₂ (M = Ni, Pd, Pt) have been studied at the B3LYP level using the SBKJC relativistic effective core potentials and their associated basis sets on metals and iodine, and the 6-31G(d) basis set on all other elements. The transition metal fragments of V, Cr, Co, Ni, Pd and Pt were chosen based on known alkyne compounds. All the complexes are local minima for both the HGeGeH and GeGeH₂ isomers of the Ge₂H₂ ligand. The complexes containing GeGeH₂ isomer as a ligand are lower in energy than those with the HGeGeH ligand (except in the V complex in which the difference is only 1.0 kcal/mol). There is a net charge transfer from ligand to metal in complexes V-Co and from metal to ligand in late transition metal complexes (Ni-Pt).     

g-C3N4/CaTi2O5复合材料制备及其光催化性能

利用类石墨氮化碳（g-C₃N₄）和亚稳相钙钛氧化物（CaTi₂O₅）固相法制备C₃N₄/CaTi₂O₅复合材料。利用X射线衍射（XRD）、金相显微镜、扫描电子显微镜（SEM）及附带能谱分析仪（EDS）和N₂吸附-脱附对样品的显微结构和比表面积进行检测分析,并用紫外-可见吸收光度计（UV-Vis）测试了样品的光吸收性能,研究C₃N₄与CaTi₂O₅物质的量之比（n_C3N4/nCaTi₂O₅）对C₃N₄/CaTi₂O₅复合样品的物相结构和微观形貌的影响,同时考察C₃N₄/CaTi₂O₅复合样品在可见光照射下光催化降解罗丹明染料效果。实验结果表明：相比纯C₃N₄和CaTi₂O₅样品,C₃N₄/CaTi₂O₅复合样品在可见光下具有较高的光催化性能,随着n_C3N4/nCaTi₂O₅增加,样品的光催化降解率随之增加而后降低,当n_C3N4/nCaTi₂O₅=1：1时,样品的光催化降解率达到最大值99.5%,并且循环重复利用5次后,样品的光催化剂降解率仍几乎保持不变。复合样品光催化性能提高主要归因于复合能级结构有效地抑制了电子和空穴复合所致。