Direct synthesis of six-coordinate nitro complexes of cobalt meso-tetraphenylporphyrinate with trans-O-donor ligands

The formation of a series of six-coordinate complexes (B)Co(TPP)(NO₂) (B is ketone, aldehyde, ether or epoxide; TPP is meso-tetraphenylporphyrin dianion) on exposure of thin films of five-coordinate Co(TPP)(NO₂) to vapors of the O-donor ligands was established by IR and UV/Vis spectroscopy (resorting to the data on isotope-substituted ¹⁵NO₂). The complex formation is accompanied by shifts of the vibration frequencies of the trans-NO₂ ligand and gives rise to new IR bands corresponding to the O-donors in the ν(C=O) or ν(C-O) region shifted with respect to these bands of free ligands. The complexes are rather stable in the solid phase but eliminate the O-donor ligand upon dissolution in an inert solvent (or upon maintenance in a vacuum for some complexes) being converted into the initial five-coordinate nitro complex. Using the IR spectra of CCl₄ solutions of the complexes containing a large excess of O-donor molecules, the equilibrium constants and the formation enthalpies of some (B)Co(TPP)(NO₂) complexes were determined, indicating weak coordination of these ligands.     

Structural characterization of dinuclear Ti(IV) complexes of rigid tetradentate dianionic diamine bis(phenolato) ligands; effect of steric bulk on coordination features

A small difference in diamine bis(phenolato) ligands, namely an additional single methylene unit, directs formation of dinuclear Ti(IV) complexes rather than mononuclear ones as characterized by X-ray crystallography. Varying steric bulk of the ligand affects the coordination number in the dinuclear complexes and the ligand to metal ratio. A ligand with reduced steric bulk leads to a L₂Ti₂(OiPr)₄ type complex featuring two octahedral metal centers bridged only by the two phenolato ligands, whereas a bulky ligand leads to a Ti₂(μ-L¹)(μ-OiPr)₂(OiPr)₄ type complex with a single chelating ligand, two bridging isopropoxo ligands, and two terminal isopropoxo groups on each of the two metal centers, which are of trigonal bi-pyramidal geometry.     

Comparison of the Electrochemical and Luminescence Properties of Two Carbazole‐Based Phosphine Oxide EuIII Complexes: Effect of Different Bipolar Ligand Structures

The photoluminescence (PL), electrochemical, and electroluminescence (EL) properties of Eu^III complexes, [Eu(cppo)₂(tta)₃] ( 1 ) and [Eu(cpo)₂(tta)₃] ( 2 ; TTA=2‐thenoyltrifluoroacetonate) with two carbazole‐based phosphine oxide ligands, 9‐[4‐(diphenylphosphinoyl)phenyl]‐9H‐carbazole (CPPO) and 9‐(diphenylphosphoryl)‐9H‐carbazole (CPO), which have different bipolar structures, donor–π‐spacer–acceptor (D–π–A) or donor–acceptor (D–A) systems respectively, are investigated. The CPPO with D–π–A architecture has improved PL properties, such as higher PL efficiency and more efficient intramolecular energy transfer, than CPO with the D–A architecture. Gaussian simulation proved the bipolar structures and the double‐carrier injection ability of the ligands. The carrier injection abilities of triphenylphosphine oxide, CPO, and CPPO are gradually improved. Notably, the Gaussian and electrochemical investigations indicate that before and after coordination, the carrier injection ability of the ligands show remarkable changes because of the particularity of the D‐π–A and D–A systems. The electrochemical studies demonstrate that coordination induces the electron cloud to migrate from electron‐rich carbazole to electron‐poor diphenylphosphine oxide, and consequently increases the electron‐cloud density on diphenylphosphine oxide, which weakens its ability for electron affinity and induces the elevation of LUMO energy levels of the complexes. Significantly, the π‐spacer in the D–π–A system exhibits a distinct buffer effect on the variation of the electron‐cloud density distribution of the ligand, which is absent in the D–A system. It is demonstrated that the adaptability of the D–π–A systems, especially for coordination, is stronger than that of D–A systems, which facilitates the modification of the complexes by designing multifunctional ligands purposefully. 1 seems favorable as the most efficient electroluminescent Eu^III complex with greater brightness, higher efficiencies, and more stable EL spectra than 2 . These investigations demonstrate that the phosphine oxide ligands with D–π–A architecture are more appropriate than those with D–A architecture to achieve multifunctional electroluminescent Eu^III complexes.     

The Coordination Chemistry of Multidentate Isocyanide Ligands

In spite of the excellent ligation properties of isocyanides, until a few years ago there was only a small number of known multidentate ligands of this type. One of the reasons for this lack of interest, when compared to monodentate isocyanides, was the linear arrangement of the M? C?N? R group, which usually inhibits the formation of mononuclear chelate complexes and leads to the formation of multinuclear or polymeric metal complexes. In these, the multidentate ligand acts in a monodentate fashion towards each metal atom. Only recently has a series of polyisocyanides with large ligand backbones been synthesized successfully. Bidentate isocyanides can bridge two metal atoms or react to give chelates with only one metal center. Tripodal ligands form mono- or binuclear complexes, in which the largest organometallic rings observed to date occur (up to 36 atoms). This class of ligands promises to be interesting for the synthesis of stable, diagnostically important technetium complexes of the type [Tc(CNR) ₆ ]⁺. There also appear to be applications for tripodal isocyanides in catalysis. A facial, chiral Cr(CNR^*)₃ unit might be able to catalyze the hydrogenation or isomerization of prochiral double bonds. It is even possible to bind triisocyanides with suitable backbones to carbonyl trimetal clusters, thereby stabilizing them, or making selective cluster formation possible. Coordinated isocyanides can be transformed readily into carbene ligands, which, in the future, could lead to complexes with polycarbene ligation.     

Polarographic study of Sn(IV) chloride-pyridine N-oxide complexes in acetonitrile

Polarograms recorded of Sn(IV) chloride in acetonitrile in the presence of controlled quantities of each of nine substituted pyridine N-oxide ligands demonstrated the formation of stable and soluble complexes with a stoichiometry dependent upon the nature and position of the ring substituent. The polarographic data associated with each complex and the free ligands are used to substantiate a proposed bonding model which explains the dependency of the complex formula on the ligand structure. The salt SnCl₄·5H₂O was employed as a source of Sn(IV) and the complete polarographic behaviour of this salt in acetonitrile is described as a basis for the interpretation of complex reduction behaviour.     

Forty Years after the Discovery of Its Nucleolytic Activity: [Cu(phen)2]2+ Shows Unattended DNA Cleavage Activity upon Fluorination

[Cu( phen )₂]²⁺ ( phen =1,10-phenanthroline) is the first and still one of the most efficient artificial nucleases. In general, when the phen ligand is modified, the nucleolytic activity of its Cu^II complex is significantly reduced. This is most likely due to higher steric bulk of such ligands and thus lower affinity to DNA. Cu^II complexes with phen ligands having fluorinated substituents (F, CF₃, SF₅, SCF₃) surprisingly showed excellent DNA cleavage activity—in contrast to the unsubstituted [Cu( phen )₂]²⁺—in the absence of the otherwise required classical, bioabundant external reducing agents like thiols or ascorbate. This nucleolytic activity correlates well with the half-wave potentials E_1/2 of the complexes. Cancer cell studies show cytotoxic effects of all complexes with fluorinated ligands in the low μm range, whereas they were less toxic towards healthy cells (fibroblasts).     

Binary and ternary complexes of Cd(II) involving triethylenetetramine and selected amino acids and DNA units

The formation equilibria of the binary complex of cadmium(II) with triethylenetetramine (Trien) and of ternary complexes Cd(Trien)L, where L refers to amino acids, DNA constituents and related compounds have been investigated. Cd(II) was found to form a highly stable complex with Trien. The acid-base equilibria of Cd(Trien)²⁺ were characterized. Ternary complexes of amino acids and DNA constituents are formed through stepwise mechanism, whereby Trien binds to Cd(II), followed by interaction with ligand (L), whereas thiol-containing ligands form ternary complexes through a simultaneous mechanism. The formation constants of the complexes were determined at 25 °C and , = 0.1M NaNO₃. The participation of different ligand functional groups in the complex-formation was examined.     

Equilibrium studies on complex formation reactions of dichlorido[(R,R)-trans-1,2-diaminocyclohexane]platinum(II) complex with ligands of biological significance

Abstract  

The hydrolysis and complex formation equilibria of [Pt(dach)(H₂O)₂]²⁺, where dach is (R,R)-trans-1,2-diaminocyclohexane, with some sulfur- and nitrogen-bonding ligands, such as l-methionine, glutathione, inosine, inosine-5′-monophosphate, and guanosine-5′-monophosphate, were studied in aqueous 0.10 M NaClO₄ solution at 298 K by potentiometric titrations. The experimentally determined pK _a values for the studied diaqua complex were 6.00 and 10.03, respectively. The acid dissociation constants of the ligands were also determined. The stoichiometry and stability constants of the formed complexes are reported, as well as the concentration distribution of the various complex species evaluated as a function of pH. In all studied systems, species with one coordinated molecule of ligand were detected. However, only in systems with l-methionine and inosine, complexes with two molecules of ligand directly coordinated to the Pt(II) ion were found. The results also show that glutathione formed the most stable complexes. These results could contribute to better understanding of the interactions between Pt(II) complexes and biologically significant molecules.     

Cryptates XXIV: Structure and stability of mononuclear and binuclear cation inclusion complexes of cylindrical macrotricyclic ligands

The cylindrical macrotricyclic ligands 1–3 yield inclusion complexes, [3]-cryptates, with various metal cations. NMR. studies indicate the successive formation of a mononuclear and a binuclear complex. The former is probably unsymmetrical undergoing fast intramolecular cation exchange; the latter is symmetrical, with a cation located on each macrocyclic subunit of the macrotricyclic system. A heteronuclear (Ag²⁺, Pb²⁺) complex has been observed. The stability constants of the mononuclear and binuclear alkali and alkaline-earth cation complexes of ligands 1–3 have been determined by potentiometric methods. The stabilities are comparable to those of the complexes of the isolated macrocyclic subunit 5b . The binuclear complexes are almost as stable as the mononuclear one even in highly charged species like for instance the complex of ligand 2 with two barium cations. Cylindrical macrotricyclic ligands are topologically well suited for the designed positioning of two metal cations in a binuclear inclusion complex.     

The intriguing substitution behavior of CO with bidentate phosphine ligands induced by a gem-dialkyl effect

The reaction of the complexes [FeCpX(CO)₂] (X = Cl, Br, I) into either [FeCp(CO)(PP)]X or [FeCpX(PP)] (PP = a bidentate diphosphine ligand) is shown to be highly dependent of the phosphine ligand used. Diphosphine ligands that form stable chelates favor formation of the neutral complex, whereas diphosphine ligands that form less stable chelates favor formation of the cationic complex. Thus, with the use of dppdmp (= 1,3-bis(diphenylphosphino)-2,2-dimethylpropane) the [FeCpX(PP)] complexes (X = Cl, Br, I) are selectively formed, induced by a gem-dialkyl effect. Apart from the bidentate phosphine ligand, the halide ion present in the iron complex has a significant influence on the course of the substitution reaction.     

Acceptorless Dehydrogenative Oxidation of Secondary Alcohols Catalysed by Cp*IrIII–NHC Complexes

A series of new Ir^III complexes with carbene ligands that contain a range of benzyl wingtip groups have been prepared and fully characterised by NMR spectroscopy, HRMS, elemental analysis and X‐ray diffraction. All the complexes were active in the acceptorless dehydrogenation of alcohol substrates in 2,2,2‐trifluoroethanol to give the corresponding carbonyl compounds. The most active complex bore an electron‐rich carbene ligand; this complex was used to catalyse the highly efficient and chemoselective dehydrogenation of a wide range of secondary alcohols to their respective ketones, with turnover numbers up to 1660. Mechanistic studies suggested that the turnover of the dehydrogenation reaction is limited by the H₂‐formation step.     

The Potent Oxidant Anticancer Activity of Organoiridium Catalysts

Platinum complexes are the most widely used anticancer drugs; however, new generations of agents are needed. The organoiridium(III) complex [(η⁵‐Cp^xbiph)Ir(phpy)(Cl)] ( 1‐Cl ), which contains π‐bonded biphenyltetramethylcyclopentadienyl (Cp^xbiph) and C^N‐chelated phenylpyridine (phpy) ligands, undergoes rapid hydrolysis of the chlorido ligand. In contrast, the pyridine complex [(η⁵‐Cp^xbiph)Ir(phpy)(py)]⁺ ( 1‐py ) aquates slowly, and is more potent (in nanomolar amounts) than both 1‐Cl and cisplatin towards a wide range of cancer cells. The pyridine ligand protects 1‐py from rapid reaction with intracellular glutathione. The high potency of 1‐py correlates with its ability to increase substantially the level of reactive oxygen species (ROS) in cancer cells. The unprecedented ability of these iridium complexes to generate H₂O₂ by catalytic hydride transfer from the coenzyme NADH to oxygen is demonstrated. Such organoiridium complexes are promising as a new generation of anticancer drugs for effective oxidant therapy.     

Electrochemical reduction of cobalt and nickel complexes with ligands stabilizing metal in low oxidation state

Electrochemical reduction of cobalt(ii) complexes containing -acceptor ligands (L = bpy, Ph₂Ppy) proceeds through three consecutive reversible steps: one-electron transfer to form a more stable Co^IL complex, transfer of two electrons at more negative potentials to form an anionic [NiL]^– complex, and reduction of the ligand to the radical anion. The stability of the cobalt complexes with different ligands decreases in the series Ph₂Ppy > Ph₃P > bpy.     

Complexation of iminodisuccinic acid (IDS) and 3-hydroxy-2,2′-iminodisuccinic acid (HIDS) with Cd2+, Hg2+, and Pb2+ in aqueous solution

In a search for environmentally friendly metal-chelating ligands for industrial applications, the protonation and complex formation equilibria of iminodisuccinic acid (IDS) and 3-hydroxy-2,2′-iminodisuccinic acid (HIDS) with Cd²⁺, Hg²⁺, and Pb²⁺ in aqueous 0.1?mol?L^?1 NaNO₃ solution were studied at 25°C by potentiometric titration. Models for complexation and stability constants of the different complexes were determined for each metal ion using the computer program SUPERQUAD. In all cases, complex formation was dominated by stable ML^2? complexes.     

A Cobalt(III)−Hydroxo Complex Bearing a Pentadentate Amidate Ligand as an Electrocatalyst for Water Oxidation

A Co(III)−hydroxo complex, [Co^III(dpaq)OH]ClO₄ ( 1-OH ) bearing a pentadentate ligand, H-dpaq, (H-dpaq=(2-[bis(pyridin-2-ylmethyl)]amino-N-quinolin-8-yl-acetamidate]) catalyses water oxidation in mildly alkaline medium (pH 8.0) at a potential of 1.4 V_NHE with an average Turn-Over-Frequency (TOF_max) of 2.8×10⁴ s⁻¹ and faradaic efficiency of 88 %. Post-electrolysis characterization of the electrode rules out the formation of any heterogeneous electroactive species. Electrochemical results and theoretical calculations confirm the occurrence of both metal and ligand centered PCET processes during anodic scanning. The resulting formally Co(V)−oxo/oxyl intermediate undergoes water nucleophilic attack to install the O−O bond. The role of axial ligand in water oxidation by Co(III)−dpaq system has been examined by comparing the reactivity of the Co-hydroxide complex ( 1-OH ) with that of its chloride-ligated counterpart, [Co^III(dpaq)Cl]Cl ( 1-Cl ). The results confirm the ability of the Co-dpaq complexes to bind water/or water derived ligands over chloride or non-aqueous solvents. The interplay of ligand redox non-innocence and σ-donating ability of the N5-carboxamido ligand helps to store oxidizing equivalents and triggers O−O bond formation.     

Phenylimidorhenium(V) Complexes with 1,3‐Diethyl‐4,5‐dimethylimidazole‐2‐ ylidene Ligands

The phenylimidorhenium(V) complexes [Re(NPh)X₃(PPh₃)₂] (X = Cl, Br) react with the N‐heterocyclic carbene (NHC) 1,3‐diethyl‐4,5‐dimethylimidazole‐2‐ylidene (L^Et) under formation of the stable rhenium(V) complex cations [Re(NPh)X(L^Et)₄]²⁺ (X = Cl, Br), which can be isolated as their chloride or [PF₆]^? salts. The compounds are remarkably stable against air, moisture and ligand exchange. The hydroxo species [Re(NPh)(OH)(L^Et)₄]²⁺ is formed when moist solvents are used during the synthesis. The rhenium atoms in all three complexes are coordinated in a distorted octahedral fashion with the four NHC ligands in equatorial planes of the molecules. The Re–C(carbene) bond lengths between 2.171(8) and 2.221(3) Å indicate mainly σ‐bonding between the NHC ligand and the electron deficient d² metal atoms. Attempts to prepare analogous phenylimido complexes from [Re(NPh)Cl₃(PPh₃)₂] and 1,3‐diisopropyl‐4,5‐dimethylimidazole‐2‐ylidene (L^i?Pr) led to a cleavage of the rhenium‐nitrogen multiple bond and the formation of the dioxo complex [ReO₂(L^i?Pr)₄]⁺.     

Complexation Studies of Pyridyl Sulfonamide Ligands for Sensing Zinc and Copper Ions

Ligand protonation and stepwise dissociation constants, formation constants and speciation of four pyridyl sulfonamide ligands (Congreeve et al., New J. Chem. 27:98–106, 2003) were assessed, using potentiometric and UV/Visible spectrophotometric pH titrations (in 80% MeOH − 20% H₂O). The suitability of these ligands as Cu(II) and Zn(II) sensors for physiological applications was assessed. Two ligands L¹ and L⁴ were p-toluenesulfonamide derivatives while L² and L³ were triflurosulfonamide derivatives. Additionally L³ and L⁴ were appended with α-methyl groups. The most stable complex was formed by L¹ with Cu(II) owing to the fact that this complex was square planar (log ₁₀  K ₁=12.15±0.004 and log ₁₀  β ₂=15.42±0.006). The rest of the complexes invariably formed distorted tetrahedron geometry and complexation was weaker. Speciation diagrams show the effect of ligand to metal concentration, revealing that the L² and L³ ligands are the most suitable for forming ML₂ complexes at physiological pH.     

The effect of ligand donor atoms on ternary complex stability

Formation constants of mixed ligand complexes of Cu²⁺, Zn²⁺, Ni²⁺, Co²⁺, and Mn²⁺,with cyadine-5′-monophosphoric acid (CMP) and various primary ligands such as 1,10-phenanthroline(phen), glycylglycine(glygly) and salicylic acid (sal) have been determined in aqueous solution at 35°C and 0.1 M (KNO₃) by potentiomeric measurements. The acid dissociation constants of all the above mentioned ligands together with their 1 : 1 binary metal complex formation constants were also measured at 35°C. In general all the 1 : 1 binary complexes follow the Irving-Williams order of stability. Further the binary metal complexes of primary ligands are more stable than their ternary complexes with CMP. For ternary complexes, Δ(log K) values seem to change from positive to highly negative as the coordinating atoms of the primary ligands were varied from N,N to N,O^? to O^?O^?. The higher stability of ternary complexes involving phen is due to its Π-bonding interaction with the above metal ions and the relative decrease in the stability of other ternary systems is due to the coulombic repulsion of donor oxygen atoms of primary and secondary ligands. Thus for ternary complexes the stabilities follow a decreasing order of M-phen-CMP > M-glygly-CMP > M-sal-CMP.     

Ligational behavior of thiosemicarbazone,semicarbazone and thiocarbohydrazone ligands towards VO(IV), Ce(III), Th(IV) and UO2(VI) ions: Synthesis,structural characterization and biological studies

Mono- and binuclear VO(IV), Ce(III), Th(IV) and UO₂(VI) complexes of thiosemicarbazone, semicarbazone and thiocarbohydrazone ligands derived from 4,6-diacetylresorcinol were synthesized. The structures of these complexes were elucidated by elemental analyses, IR, UV–vis, ESR, ¹H NMR and mass spectra as well as conductivity and magnetic susceptibility measurements and thermal analyses. The thiosemicarbazone (H₄L¹) and the semicarbazone (H₄L²) ligands behave as dibasic pentadentate ligands in case of VO(IV) and UO₂(VI) complexes, tribasic pentadentate in case of Ce(III) complexes and monobasic pentadentate in case of Th(IV) complexes. However, the thiocarbohydrazone ligand (H₃L³) acts as a monobasic tridentate ligand in all complexes except the VO(IV) complex in which it acts as a dibasic tridentate ligand. The antibacterial and antifungal activities were also tested against Rhizobium bacteria and Fusarium-Oxysporium fungus. The metal complexes of H₄L¹ ligand showed a higher antibacterial effect than the free ligand while the other ligands (H₄L² and H₃L³) showed a higher effect than their metal complexes. The antifungal effect of all metal complexes is lower than the free ligands.     

Substituent Effect Parameters: Extending the Applications to Organometallic Chemistry

Typically, metal complexes are constituted of an acceptor metal ion and one or more Iigands containing the donor atoms. Accordingly, the properties of a metal complex are equally dependent on the nature of the metal ion and the ligands. Minute structural variations in the ligand will may result in linear changes in the respective energetic parameters and such linear relationships have paramount importance in organometallic chemistry. The variation in ligands is virtually limitless and substantial because of the extent of organic chemistry available for the modelling of desirable ligands, apart from the variation in metal ions. Anyhow, there is still a need for new parameters for the design and quantification of new ligands which in turn leads to the synthesis of metal complexes with possibly predictable chemical properties. Previous studies have demonstrated that quantum chemically derived molecular electrostatic potential (MESP) parameters can be listed as one of the superior quantifiers in this regard, which can act as an effective ligand electronic parameter. The interaction between the ligand part and metal-containing part will be crucial in assessing the reactivity of organometallic complexes. Here we are applying MESP based substituent constants derived from substituted benzenes to forecast the interaction energies in (pyr^*)W(CO)₅, (NHC^*)Mo(CO)₅ and (η⁶-arene^*)Cr(CO)₃ complexes. Ligands and metal ions are varied in each case for better understanding and transparency.