Polymer-bound aluminium salen complex as reusable catalysts for CO2 insertion into epoxides

Two polymeric aluminium salen complexes in where the backbones are either a partially crosslinked polystyrene [(Al(salen)/PS)] or poly(ethylene glycol bismethacrylate) [(Al(salen)/PEA)] have been synthesised and used for the carbon dioxide insertion into epoxides to form cyclic carbonates. The catalytic activity of these polymers is similar to that of the unsupported aluminium salen complexes, and the polymeric catalysts can be easily separated from the reaction mixture and reusable in consecutives runs. The activity and reusability of the polymeric salen complex depends on the nature of the polymer: PEA being a polymer with a high oxygen content in the backbone enhances the initial activity as compared to PS, but Al(salen)/PEA exhibits lower stability as compared to Al(salen)/PS and a Al depletion occurs upon use. The presence of nucleophiles such as N-methylimidazole or N,N-dimethylaminopyridine in excess increases the catalytic activity of the polymeric Al(salen) catalyst. Also polymeric nucleophiles have been found to be suitable reusable co-catalysts for this reaction.     

Synthesis of bifunctional cyclic carbonates from CO2 catalysed by choline-based systems

Easily prepared choline iodide is an active catalyst for the synthesis of cyclic carbonates through the coupling reaction of CO₂ and epoxides using low pressure (1 MPa), moderate temperature (85 ºC) and green solvents (ethanol and propan-2-ol). The effects of reaction temperature, pressure, reaction time and amount of catalyst used were also investigated. The results showed moderate to high yields and excellent selectivities of cyclic carbonates with vinyl or acrylate groups under mild reaction conditions. The heterogenization of choline over a Merrifield resin gives access to a supported catalyst with good recyclability and reactivity that can be extended to a variety of terminal epoxide substrates.     

Syntheses of polycarbonate and polyurethane precursors utilizing CO2 over highly efficient, solid as-synthesized MCM-41 catalyst

As-synthesized MCM-41 was used as a reusable, heterogeneous catalyst for the eco-friendly synthesis of cyclic carbonate precursors of polycarbonates via a cycloaddition reaction of CO₂ with epoxides. This catalyst is also efficient for the synthesis of alkyl and aryl carbamate precursors of polyurethanes via the reaction of amines, CO₂ and alkyl halides. Both these reactions were carried out under mild conditions and without using any solvent or co-catalyst. CO₂ is utilized as a raw material replacement for toxic phosgene in the conventional synthesis of these chemicals.     

Chemical fixation of CO2 with highly efficient ZnCl2/[BMIm]Br catalyst system

The chemical fixation of CO₂ with mono-substituted terminal epoxides or cyclohexene oxide to form cyclic carbonates under the ZnCl₂/[BMIm]Br catalyst system without using additional organic solvents was achieved in excellent selectivity (>98%) and TOF (5410 h⁻¹) and the catalyst could be used six times almost without losing its catalytic activity and selectivity. Besides, the pure cis-cyclic carbonate of cyclohexene oxide was obtained in this catalyst system.     

1,5,7-Triazabicyclo[4.4.0]dec-5-ene (TBD) an efficient homogeneous catalyst for aldol condensation reactions. Study of the catalyst recovery and reusability using CO2

In this work it was shown that TBD (1,5,7-triazabicyclo[4.4.0]dec-5-ene), a cheap and commercially available guanidine base, efficiently catalyzes aldol condensation reactions yielding interesting products for pharmacological and fragrance industries. This methodology works under solvent-less conditions and affords with very good conversions the corresponding products. Moreover, a simple and effective separation protocol using the CO₂ fixation was employed. The catalyst could be recovered and re-used for three consecutive runs without significant loss of activity.     

Fuzzy model prediction of Co (III)Al2O3 catalytic behavior in Fischer-Tropsch synthesis

The application of Co(Ⅲ)/Al2O3 catalyst in Fischer-Tropsch synthesis(FTS)was studied in a wide range of synthesis gas conversions and compared with Fuzzy Simulation results.Present study applies fuzzy model to predicting the product composition of CH4,CO2 and CO in Fischer-Tropsch process for natural gas synthesis,in which the input vector was 4-dimension including four variables(operating pressure, operating temperature,time and CO/H2 ratio)of 70 different experiments and the output product is a composition of CO2,CO and CH4. The Mamdani algorithm has been applied to the training of the fuzzy system and the test set was used to evaluate the performance of the system including R2,ARE,AARE and SD.The results demonstrated that the predicted values from the model were in good consistency with the experimental data.The work indicates how fuzzy inference system(FIS),as a promising predicting technique,would be effectively used in FTS.     

Reduction of CO2 by nickel (II) macrocycle catalyst at HMDE

With the aim of finding a suitable electrocatalyst for the efficient reduction of carbon dioxide, the electrochemistry of nickel (II) complex of 1,3,6,9,11,14-hexaazatricyclo [12·2·1·1] octadecane was studied using cyclic voltammetry (CV) and controlled-potential electrolysis (CPE) techniques in the presence and absence of CO₂ in 100% H₂O, CH₃CN-H₂O mixtures (20–100%) and DMF-H₂O (70–100%) mixtures. The efficiency of this process is determined using the coulometry technique. CO is the major product in the gaseous phase and HCOOH the sole product formed in the solution phase.     

Titanocene dichloride/KI: an efficient catalytic system for synthesis of cyclic carbonates from epoxides and CO2

Titanocene dichloride (Cp₂TiCl₂)/KI was developed to be an efficient catalytic system for the cycloaddition of CO₂ to epoxides to synthesize relevant cyclic carbonates from epoxides and CO₂. Various influencing factors on the coupling reaction, such as co‐catalyst, temperature, CO₂ pressure and reaction time, were investigated. The optimal reaction conditions were KI as co‐catalyst, 150 °C reaction temperature, 12 atm CO₂ pressure and 4 h reaction time using THF as solvent for the synthesis of propylene carbonate in 98% yield. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of new CO2-soluble ruthenium(II) and cobalt(II) polypyridine complexes bearing fluorinated alkyl chains and their application to photoreduction of liq. CO2

Eight types of new CO₂-soluble or CO₂-philic ruthenium(II) and cobalt(II) polypyridine complexes, namely, [M(F84OPh)₃](BArF)₂, [M(F44OPh)₃](BArF)₂, [M(F62Ph)₃](BArF)₂, and [M(F62O)₃](BArF)₂ (M = Ru or Co, BArF: tetrakis[3,5-bis(trifluoromethyl)phenyl]borate), were prepared from bipyridine derivatives bearing highly fluorinated alkyl chains and applied to the photoreduction of liq. CO₂ under a high pressure of 6.8 MPa at 35 °C. All these complexes have higher philicity toward liq. CO₂ than the corresponding complexes with PF⁶⁻ as the counteranion. Using the Ru(II)-Co(II) systems of [M(F44OPh)₃](BArF)₂ and [M(F62O)₃](BArF)₂, direct photoreduction of CO₂ was achieved without the use of any organic solvent.     

R&D activities in Japan on methanol synthesis from CO2 and H2

Methanol synthesis from CO₂ and H₂ can be a useful process for conversion and transportation of hydrogen energy derived from non-fossil energies. More than ten research groups in Japan have extensively investigated the methanol synthesis from both academic and practical points of view. Recent R&D activities in Japan for developing high performance catalysts, for elucidating the reaction mechanism and also for operating a bench scale plant have been reviewed in this paper.     

A poly(ethylene glycol)-supported quaternary ammonium salt for highly efficient and environmentally friendly chemical fixation of CO2 with epoxides under supercritical conditions

A PEG-supported quaternary ammonium salt is proved to be an efficient and recyclable homogeneous catalyst for solvent-free synthesis of cyclic carbonates from carbon dioxide and epoxides under supercritical conditions. Supporting Bu₄NBr on soluble polymer PEG6000 enhances the catalytic activity. The workup procedure is straightforward, and the catalyst can be reused over five times with no appreciable loss of catalytic activity and selectivity.     

镧石型碳酸镨钕向碱式碳酸镨钕的相转变反应特征及其应用

镧石型碳酸镨钕[(PrNd)2(CO3)3·8H2O,LPN]在95℃的不同起始pH值的溶液中陈化不同时间所得样品的XRD衍射图证明了LPN向碱式碳酸镨钕[(PrNd)(OH)(CO3),BPN]的相态转变。为此,详细研究了这一相态转变的反应条件以及粒子特征变化。结果表明:LPN是由片状或条状结晶连生而成的聚集体,具有大的粒度和小的堆密度。当在热的水溶液中陈化时,由于水解反应而发生由LPN向BPN的相转变。这一相转变可以在95℃下pH=7以上的溶液中发生,其转化率随起始溶液pH值的升高和陈化时间的延长而增大。随着相转变的进行,溶液的pH值开始下降明显,而后趋于平缓。相应地,大的团聚体颗粒解散成小的单个粒子,导致粒度减小,分布变窄,氯根含量降低和堆密度的增大。而且,这些变化直接与溶液pH值和陈化时间相关。据此,发展了一种新的制备具有高堆密度、低氯根含量、细粒度和窄分布的新方法,而且通过改变相转变条件可以方便地调谐颗粒特征。     

镧石型碳酸镨钕向碱式碳酸镨钕的相转变反应特征及其应用

本文研究了镧石型碳酸镨钕[（PrNd）₂（CO₃）₃·8H₂O,LPN]在95℃的不同起始pH值的溶液中陈化不同时间所得样品的XRD衍射图,证明所得样品为碱式碳酸镨钕[（PrNd）（OH）（CO₃）,BPN]。为此,详细研究了这一相态转变的反应条件以及粒子特征变化。结果表明：LPN是由片状或条状结晶连生而成的聚集体,具有大的粒度和小的堆密度。当在热的水溶液中陈化时,由于水解反应而发生由LPN向BPN的相转变。这一相转变可以在95℃下pH=7以上的溶液中发生,其转化率随起始溶液pH值的升高和陈化时间的延长而增大。随着相转变的进行,溶液的pH值开始下降明显,而后趋于平缓。相应地,大的团聚体颗粒解散成小的单个粒子,导致粒度减小,分布变窄,氯根含量降低和堆密度的增大。而且,这些变化直接与溶液pH值和陈化时间相关。据此,发展了一种新的制备具有高堆密度、低氯根含量、细粒度和窄分布的新方法,而且通过改变相转变条件可以方便地调谐颗粒特征。     

ZIF-67/CeO2催化CO2和甲醇直接合成碳酸二甲酯

采用沉淀法将ZIF-67负载到CeO₂上,制备了具有多重活性位点的非均相催化剂ZIF-67/CeO₂,并研究其催化CO₂和甲醇直接反应生成碳酸二甲酯(DMC)的性能。采用 X 射线衍射、N2吸附-脱附、傅里叶变换红外光谱和 X 射线光电子能谱研究了ZIF-67/CeO₂的各种理化性质。结果表明,ZIF-67的引入使ZIF-67/CeO₂催化剂产生更多的氧空位。在考察的ZIF-67/CeO₂系列催化剂中,0.3-ZIF-67/CeO₂(0.3为Co、Ce物质的量之比)在具有高的比表面积的同时还能保持介孔结构,具有丰富的酸碱位点,并且具有较高的CO₂吸附容量,表现出最好的催化性能。在反应温度为140℃、压力为4.5 MPa的条件下反应4 h,DMC收率可达到3.79 mmol_DMC·gcat^-1。     

沉淀转化法制备的Co(OH)2的超级电容特性

Cobalt hydroxide, often used as an additive in nickel electrode, is rarely studied as active material for su-percapacitors. In this paper, the Co(OH)₂ with the particle size less than 20nm by deposition transformation was synthesized. Its single electrode specific capacitance was measured to be 92F·g^-1, and the electrode resistance was so low that the initial potential drop when discharging is unobvious even the discharge current increased to 200mA for a 1cm² electrode. After ten thousand cycles, Co(OH)₂ on the electrode changes to Co₃O₄ gradually, the resistance of the electrode does not increase much, while the specific capacitance increases to 133F·g^-1 at 10mA。     

ZIF-67/CeO2催化CO2和甲醇直接合成碳酸二甲酯

采用沉淀法将ZIF-67负载到CeO₂上,制备了具有多重活性位点的非均相催化剂ZIF-67/CeO₂,并研究其催化CO₂和甲醇直接反应生成碳酸二甲酯(DMC)的性能。采用X射线衍射、N₂吸附-脱附、傅里叶变换红外光谱和X射线光电子能谱研究了ZIF-67/CeO₂的各种理化性质。结果表明,ZIF-67的引入使ZIF-67/CeO₂催化剂产生更多的氧空位。在考察的ZIF-67/CeO₂系列催化剂中,0.3-ZIF-67/CeO₂(0.3为Co、Ce物质的量之比)在具有高的比表面积的同时还能保持介孔结构,具有丰富的酸碱位点,并且具有较高的CO₂吸附容量,表现出最好的催化性能。在反应温度为140℃、压力为4.5 MPa的条件下反应4 h,DMC收率可达到3.79 mmol_DMC·g_cat^-1。     

NHC catalyzed CO2 fixation with epoxides: Probable mechanisms reveal ter molecular pathway

Six different pathways for the NHC-mediated CO₂ transformation reaction of epoxide to cyclic carbonate are investigated with DFT method at MPWB1K/6-311++G(3df,2p) level which confirms that the most favorable pathway is ter molecular in nature and passes through a regioselective S_N2 anti-attack of NHC on the least substituted carbon of the epoxide-CO₂ complex.     

CO/CO2一步法制备航空煤油的研究进展

CO/CO₂一步法制备航空煤油技术是石油基航空煤油重要的替代手段之一。目前,CO一步法制备航空煤油技术存在的主要问题是航空煤油组分C₈~C₁₆选择性不高。CO₂一步法制备航空煤油存在的问题是CO₂转化率低和C₈~C₁₆选择性不高。综述了近五年CO/CO₂一步法制备航空煤油用催化剂的研究进展。催化剂研究的重点在于主催化剂、载体和助催化剂。调变主催化剂、载体和助催化剂,有望得到理想的航空煤油组分。     

CO2 fixation by hydrogenation over coprecipitated Co/Al2O3

CO₂ fixation by hydrogenation over coprecipitated 36 wt.% Co/Al₂O₃ has been studied under a range of reaction conditions to clarify the effects of reaction variables and to determine the kinetics and mechanism of the reaction. A comparison of the results with those reported for CO hydrogenation on the same catalyst indicates that, although product distributions of CO₂ and CO hydrogenation differ, the kinetics and mechanism are similar.     

La2(CO3)3纳米线的微乳液法制备与表征

La₂(CO₃)₃ nanowires were prepared in the nonionic surfactant microemulsion(Triton X-100/cyclohexane/water)system. Transmission electron microscopy (TEM) and selected area electronic diffraction (SAED) were used to characterize the shape and size of the products. The results showed that the pH value and concentration of mother solution, temperature and aging time all could affect the morphology and size of the La₂(CO₃)₃ nanowires. The lengths of the nanowires were more than 10 μm and the diameters were in the range of 30～200 nm.