Sulfoxide-controlled SN2′ displacements between cuprates and vinyl and alkynyl epoxy sulfoxides

The S_N2′ displacement of readily available vinyl epoxy sulfoxides with organocopper reagents takes place in good yields with high anti selectivity and a good degree of E/Z stereocontrol to produce enantiopure α-hydroxy vinyl sulfoxides. A second allylic displacement on the related mesyloxy vinyl sulfoxides allows for the asymmetric construction of two adjacent chiral centers. In addition, cuprate mediated S_N2′ addition to alkynyl epoxy sulfoxides affords α-hydroxy allenyl sulfoxides in good yields.     

Domino functionalizations of the amino terminus of 6-aminopenicillanates with Ph3PCCO

6-Aminopenicillanates, or the sulfoxides or the sulfones thereof, were N-acylated in a three-component reaction with an aldehyde and Ph₃PCCO to give the corresponding 6-(E-2′-alkenoyl)amides. This domino addition-Wittig alkenation sequence was extended by an additional Claisen rearrangement step in the side-chain in the case of 5g.     

A novel method for the reduction of sulfoxides and pyridine N-oxides with the system silane/MoO2Cl2

A novel method for the reduction of sulfoxides and pyridine N-oxides using a silane and a catalytic amount of MoO₂Cl₂ in excellent yields and with a wide functional group tolerance is reported. A green protocol for this reaction was developed in water with the air-stable catalytic system PMHS/MoO₂Cl₂(H₂O)₂.     

Hydrothermal synthesis and structure of the first tin(II) squarate Sn2O(C4O4)(H2O)—comparison with Sn2[Sn2O2F4]

A tin(II) squarate Sn₂O(C₄O₄)(H₂O) was synthesized by hydrothermal technique. It crystallizes in the monoclinic system, space group C2/m (no. 12) with lattice parameters a=12.7380(9) Å, b=7.9000(3) Å, c=8.3490(5) Å, β=121.975(3)°, V=712.69(7) Å³, Z=4. The crystal structure determined with an R=0.042 factor, consists of [(Sn₄O₁₀)(H₂O)₂] units connected from one another in the [101] and [010] directions via squarate groups to form layers separated by Sn(II) lone pairs. This compound presents the same remarkable structural arrangement as observed in the tin-oxo-fluoride Sn₂[Sn₂O₂F₄] inorganic compound with Sn(II) lone pairs E(1) and E(2) concentrated in large rectangular-shape tunnels running along [001] direction.     

Convenient stereoselective synthesis of 3-hydroxy-2-iodo-2(E)-alkenyl sulfides via iodohydroxylation of 1,2-allenyl sulfoxides in the presence of BnSH

The iodohydroxylation of 1,2-allenyl sulfoxides with I₂ in the presence of BnSH affords 3-hydroxy-2-iodo-2(E)-alkenyl sulfides in good yields and selectivities. The stereochemistry for the products of this transformation is opposite to what was obtained from the iodohydroxylation of 1,2-allenyl sulfides. Based on the results of some control experiment, a mechanism was proposed.     

Polyèdre de coordination de l'etain(II) dans SnC2O4: Relations structurales entre SnC2O4, Na2C2O4 et Na2Sn(C2O4)2

The crystal structure of SnC₂O₄ has been determined by X-ray single-crystal techniques and refined to R = 0,018 for 1139 reflections. The cell is monoclinic, space group $\text{C2}\text{c}$ with Z = 4 formula units, the parameters being a = 10,375(3)Å. b = 5,504(2)Å, c = 8,234(3)Å, β = 125,11(2)°. The oxalato groups, located on symmetry centers, are chelated to two Sn atoms through one oxygen on each carbon atom, giving rise to an infinite string (SnC₂O₄)_n. The Sn(II) atom is one-side bonded to four oxygen atoms with two SnO bonds of 2,232(2) Å and two of 2,393(2) Å. The tin atom is in a distorted trigonal bipyramid SnO₄E, the lone pair E occupying one of the apices of the equatorial trigonal base of the polyhedron. Crystal structure comparison with disodium bisoxalatostannate(II), Na₂Sn(C₂O₄)₂, permits one to deduce SnC₂O₄ by crystallographic shear operation $\text{1}\text{8}\text{[34}\text{2}\text{](001)}$ of $\text{c}\text{2}$ periodicity. Na₂Sn(C₂O₄)₂ can be described as an intergrowth of SnC₂O₄ and Na₂C₂O₄ structures and consldered as the first member of a new series Na₂Sn_1+n(C₂O₄)_2+n with n integer ? 0.     

The compound Cr2TiO5 in the system Cr2O3TiO2

The compound Cr₂TiO₅ could be synthesized as a stoichiometric single phase above 1660°C in air. Application of selected area electron diffraction, high resolution electron microscopy and powder X-ray diffraction studies showed that Cr₂TiO₅ is isomorphous with CrFeTiO₅, with V₃O₅ type structure. It is monoclinic, a = 7.020(1)Å, b = 5.025(1)Å, c = 9.945(2)Å and β = 111.43(2)°. It was found that Cr₂TiO₅ is unstable relative to a mixture of Cr₂O₃ (ss) and a so-called “E” phase, below 1660°C.     

Stereoselective synthesis of 2-iodo-1-perfluoroalkyl-2(Z)-alkenes and E or Z-4-perfluoroalkylmethyl-4-en-2-ynol via Na2S2O4-promoted radical addition reaction of perfluoroalkyl iodides with allenes and the palladium-catalyzed kinetic resolution with Sonogashira coupling reaction

A Na₂S₂O₄-promoted radical addition reaction of perfluoroalkyl iodides with allenes has been studied in which a Z/E mixture of 2-iodo-1-perfluoroalkyl-2-alkenes 3 were afforded in 52-69% yields. A kinetic resolution using Sonogashira coupling reaction in MeCN using Et₂NH as the base was developed to synthesize the 2-iodo-1-perfluoroalkyl-2(Z)-alkenes (Z-3) and E-4-perfluoroalkylmethylalk-4-en-2-ynols (E-5) stereoselectively. A complete Sonogashira coupling procedure in Et₂NH at 40 °C was also developed affording a mixture of E and Z-4-perfluoroalkylmethyl-4-en-2-ynols (E-5 and Z-5), which may be easily separated by chromatography on silica gel.     

Chemoselective sulfoxidation by H2O2 or HNO3 using a phosphate impregnated titania catalyst

A variety of organosulfur compounds have been selectively oxidized to the corresponding sulfoxides by either H₂O₂ or HNO₃ using a newly developed solid acid catalyst composed of 84.5% of TiO₂ and 15.5% of [Ti₄H₁₁(PO₄)₉]·nH₂O (n = 1-4). The chemoselective oxidation of sulfides in the presence of vulnerable groups such as -CN, -CC-, -CHO, or -OH, as well as sulfoxidation of substrates like benzothiazole, glycosyl sulfide, and dibenzothiophenes is some of the important attribute of the protocol. Nitric acid, under the present experimental conditions, brings about relatively better selectivity than hydrogen peroxide.     

YBa2Cu3O7 electro-magnetic optic effects in Ba L2,3 X-ray absorption near Tc

The onset of electro-magnetic optic effects, observed at the Ba L_2,3 edges synchrotron X-ray absorption by a YBa₂Cu₃O₇ single crystal, 20 K above the transition temperature to superconductivity, T_c ∼ 92 K is used to identify the role played by the Ba donor layer in the transition to superconductivity in the CuO₂ layers. Negative permeability leads to Faraday rotation of the transmitted beam below T = 112 to 56 K for the 22 μm thick single crystal (c-axis orientation of 8π/18 relative to ε_X-rays) and sharp changes in the density of empty final states lead to zero transmitted radiation in an interval ΔE at the given orientation. The temperature dependence: ΔE(L₂) = 1.4, 3.5 and 3.9 eV, while ΔE(L₃) = 5.3, 6 and 7 eV at T = 92, 74 and 63 K, respectively, indicates that the width of the empty final states bands increases as T decreases. ΔE(L₃)/ΔE(L₂) = 3.8 at 92 K to 1.8 at 63 K also indicates that the d_5/2 symmetry bands fill faster than those of d_3/2 symmetry below T_c, providing the first experimental evidence of unpaired spin-orbit states in the Ba donor layer of a superconductor. These effects, characteristic of ferromagnetic and anti-ferromagnetic materials near a resonance absorption, signal the onset of a Mott transition. The interaction between the layer states is described using 1D conjugate molecular orbitals.     

Dinuclear oxomolybdenum(VI) acetylacetonates: Crystal and molecular structure of Mo2O5(acac)2L2 (L = D2O,DMF)

The behavior of MoO₂(acac)₂ (acac = acetylacetonate) towards representative amines, amides, sulfoxides and phosphine oxides in common solvents has been examined. Compounds of the composition Mo₂O₅(acac)₂L₂ [L = H₂O, D₂O, dimethylformamide (DMF), dimethylacetamide (DMA), dimethylbenzamide (DMBA), tetramethylurea (TMU), dimethylsulfoxide (DMSO), dibutylsulfoxide (Bu₂SO), p-tolylsulfoxide (p-Tol₂SO), tributylphosphine oxide (OPBu₃), triphenylphosphine oxide (OPPh₃), hexamethylphosphoramide (HMPA)], derived from partial hydrolysis of MoO₂(acac)₂ followed by condensation and coordination of L, can readily be isolated. The crystal and molecular structures of Mo₂O₅(acac)₂L₂ (L = D₂O, DMF) have been established by X-ray diffraction analysis.     

Studies on the highly regio- and stereoselective selenohydroxylation of 1,2-allenylic sulfoxides with PhSeCl

The selenohydroxylation of 1,2-allenyl sulfoxides with PhSeCl in MeCN/H₂O (10/1) afforded E-3-hydroxy-2-phenylseleno-1-alkenyl sulfoxides in good yields and high regio-/stereoselectivities.     

Observed translational energy dependence of the K + C2H5I → KI + C2H5 reaction cross section from 0.17 to 0.55 eV (c.m.)

Relative values of the total reaction cross section σ_R for the crossed molecular beam reaction K + C₂H₅I → KI + C₂H₅ have been measured over the translational energy (E_T) range 0 17–0.55 eV. It is found that σ_R decreases monotonically with E_T over this range, any maximum in σ_R(E_T) is presumed to lie below 0.17 eV.     

N,N-Ethylene-bridged flavinium salts derived from l-valinol: synthesis and catalytic activity in H2O2 oxidations

Three chiral N¹,N¹⁰-ethylene-bridged flavinium salts with a stereogenic centre derived from l-valinol are prepared and investigated as oxidation catalysts. These salts efficiently catalyse chemoselective H₂O₂ oxidation of sulfides to sulfoxides and the oxidation of 3-phenylcyclobutanone to the corresponding lactone at room temperature. The flavinium salts react with hydrogen peroxide to form flavin-10a-hydroperoxide, which is the agent responsible for oxidation of the substrate.     

Ate complexes of Ge(II) and Sn(II) with bidentate ligands [LiE(OCH2CH2NMe2)3]2 (E=Ge, Sn): synthesis and structure

The reaction of equimolar quantities of LiOCH₂CH₂NMe₂ and E¹⁴(OCH₂CH₂NMe₂)₂ (E¹⁴=Ge, Sn) in ether yielded new ate complexes [LiE¹⁴(OCH₂CH₂NMe₂)₃]₂ (E¹⁴=Ge (1), Sn (2)) with bidentate ligands. The compounds 1 and 2 are white crystalline substances which are highly soluble in THF and pyridine and very sensitive to the traces of oxygen and moisture. The structures of these compounds are studied by X-ray diffraction analysis. The ate complexes 1 and 2 are powerful nucleophiles and may be employed as ligands (neutral) in the coordination chemistry of the transition metals. The electronegative O-substituents at the divalent E¹⁴ atoms render them less oxidizable than alkyl- or aryl-substituted derivatives, and the bidentate ligands, owing to intramolecular donor-acceptor interactions, make them more thermodynamically stable compared to monodentate ligands.     

Conductibilité electrique aux basses températures des composés binaires Cr2X3 et Cr3X4 (X = S,Se ou Te)

Electrical resistivity of some binary compounds Cr₂X₃ and Cr₃X₄ (X = S, Se or Te) is studied on polycrystalline samples with the four point probe method, at temperatures between 4.2 and about 330 K. A metallic behavior is observed on Cr₂Te₃, Cr₃Te₄, Cr₃S₄ and the 3c′ form of Cr₂Se₃. Some other compounds are semiconductors: Cr₃Se₄ (E_300K ≈ 0.07 eV; E_4.2K = 2.07 × 10^?4 eV), the 2c′ form of Cr_2+εSe₃ (E_300K ≈ 0.074 eV; E_4.2K = 2.76 × 10^?4 eV) and the 3c′ form of Cr₂S₃ (E_275K ≈ 0.55 eV). The observed results seem to be closely related to the nature of the octahedral neighborhood of the cations.     

Sur un nouveau compose doubleur de frequence,synthese, et structure du nitrate-bis-nitratotrifluoroantimonate de potassium K2SbF3(NO3)2·KNO3

The study of the KNO₃SbF₃ system shows a 3:1 stoichiometric complex the structure of which has been solved from single-crystal X-ray diffraction data (orthorhombic Cmc2₁, R = 0.045 for 882 planes). It is a potassium nitrate bis-nitratotrifluoroantimonate. Antimony atoms present an intermediary coordination between AX₃E and AX₅E types. Infrared and Raman spectra are discussed taking into account crystallographic results. A nonlinear optical test using a powder sample shows a signal with an intensity near that of KDP.     

Orbital ground state inversion in [Fe(H2O6](CIO4)2

Mössbauer spectroscopy in external magnetic fields has been used to measure the signs of the principal components of the electric field gradient V_zz in the two forms of [Fe(H₂O)₆)(C10₄)₂. The signs are V_zz negative for the (B) with ΔE_B = 1.4 mm/sec. This implies a trigonally distorted ligand field and the transition (A) → (B) corresponds to compression → elongation with respect to the trigonal axis.     

Ferroelectric perovskite-type barium copper niobate: BaCu1/3Nb2/3O3

A perovskite-type BaCu_1/3Nb_2/3O₃ was prepared by high temperature reaction using BaCO₃, CuO and Nb₂O₅. The X-ray powder diffraction pattern of this compound was indexed with the tetragonal cell with the lattice parameters of a=4.0464(4) and c=4.1807(4) Å (c/a=1.033). This compound had the tetragonal perovskite-type structure in which the B site was occupied statistically by Nb and Cu atoms. From high temperature X-ray powder diffraction patterns this compound had a phase transition from the tetragonal to cubic symmetry in the temperature range of 500-600 °C. The P-E and S-E hysteresis loops occurred at room temperature and the apparent maximum in the temperature dependence of the dielectric constant was observed at 520 °C. The temperature dependence of the inverse of magnetic susceptibility exhibited paramagnetic behavior.     

PyHBr3/TBN/H2O as catalytic system for the oxidation of sulfides to sulfoxides with air as the oxidant

Pyridinium bromide perbromide (PyHBr₃) and tert-butyl nitrite (TBN) catalytic system was used for the oxidation of sulfides with air as the oxidant. Under mild conditions (at room temperature), a series of sulfide substrates have been oxidized to their corresponding sulfoxides with high conversion rate. To the best of our knowledge, for the first time, the PyHBr₃/TBN/H₂O is reported as exceptional catalyst system for the oxidation discussed in this Letter.