Elaboration of a novel effective approach to enantiopure functionalised 2,2-dialkyl-1,1-binaphthyls by stereoconservative cross-couplings at positions 2 and 2

The yield and the stereochemical outcome of methylations of 1,1^′-binaphthyl-2,2^′-dielectrophiles (ditriflate and diiodide) clearly depend on the reactivity of the organometallics used. It was found that only the Negishi reaction of a diiodide allows direct effective synthesis of non-racemic functionalised C₂-symmetric 2,2^′-dialkyl-1,1^′-binaphthyls.     

Study on the electronic effects on stereoconservativity of Suzuki coupling in chiral groove of binaphthyl

Suzuki diarylation of enantiopure 2,2′-diiodo-1,1′-binaphthyl catalyzed by triphenylphosphane palladium complex is accompanied by almost complete racemization of binaphthyl moiety (7% e.e.). Based on formerly proposed mechanism, secondary oxidative addition of Pd(II) to Pd(IV)-complex, competitive to transmetallation, is expected to be responsible for racemization. In accordance with it, racemization pathway can be suppressed in the favour of stereoconservative route by electronic factors, which control the rate of oxidative addition. Among the electronic factors, decreasing donating ability of the tested phosphane ligands resulted in increase of e.e. of the diarylated product up to 65%, using triindol-1-ylphosphane. However, this factor slows down also the rate of the primary oxidative addition that lowers the yield of the diarylated product. Further decrease in donating ability of the ligand makes palladium complex almost inactive in this cross-coupling reaction. Effect of the leaving group of binaphthyl 2,2′-dielectrophile (as a matter of the reactivity of C-X bond towards oxidative addition) was found to be even more dramatic: almost stereoconservative route in case of 2,2′-dibromo-1,1′-binaphthyl (95% e.e.), but no reaction in case of corresponding ditriflate.     

A Convenient and General Method for Pd-Catalyzed Suzuki Cross-Couplings of Aryl Chlorides and Arylboronic Acids

From only commercially available reagents a wide array of Suzuki cross-couplings of aryl chlorides with arylboronic acids can be effected in excellent yield [Eq. (a)]. This development provides a general solution to a long-standing limitation of this extremely powerful process—the poor reactivity of inexpensive and readily accessible aryl chlorides. dba=dibenzylideneacetone.     

An efficient and simple protocol for a PdCl2-ligandless and additive-free Suzuki coupling reaction of aryl bromides

A highly efficient, convenient, and environmentally friendly protocol was developed for the PdCl₂-catalyzed ligandless and additive-free Suzuki reaction of aryl bromides with arylboronic acids in water/ethanol.     

Efficient synthesis of racemic and chiral alkenyl sulfoxides by palladium-catalyzed Suzuki coupling

Alkenyl sulfoxide derivatives are obtained in high yields through a palladium-catalyzed Suzuki/Miyaura cross-coupling reaction of racemic and chiral 1-halo sulfoxides with aryl and alkenyl boronic acids. Chiral substrates react with no loss of optical purity and high optical yields. The reaction takes place with different palladium catalysts, such as Pd(PPh₃)₄ or Pd(OAc)₂/DABCO. Although nitrogen ligands like DABCO lead to an active palladium catalyst, they are less effective than the phosphine ones.     

The development of an approach toward sterically-hindered chiral 2′-aryl-1,1′-binaphthalenes functionalized at position 2

Several approaches were examined for the preparation of 1,1′-binaphthalene derivatives bearing sterically demanding ortho-substituted aryl at position 2′ which are suitable for further functionalization at position 2. Steric hindrance of ortho-substituted aryl groups was critical for the approach through BINOL monotriflate. Among variations of cross-coupling reactions of 2,2′-dihalo-1,1′-binaphthalenes, Negishi arylation of an enantiopure 2,2′-dibromide was found to be the method of choice for regioselective and stereoconservative preparation of the target 2′-monoarylated precursor. Functionalization of the latter at position 2 was demonstrated by bromine substitution via lithiation followed by the reaction with several electrophiles.     

Palladium-benzimidazolium salt catalyst systems for Suzuki coupling: development of a practical and highly active palladium catalyst system for coupling of aromatic halides with arylboronic acids

Palladium-benzimidazolium salt catalyst systems have been studied for the Suzuki coupling. A different substitutent effect has been uncovered with respect to nitrogen substituents in the benzimidazolium salts from the palladium-imidazolium salt analogs. A practical and highly active palladium catalyst system, PdCl₂/N,N′-dibenzylbenzimidazolium chloride 2, has been identified for the Suzuki coupling of aromatic halides with arylboronic acids. The coupling of a wide array of aromatic halides with arylboronic acids with the PdCl₂-2 catalyst system gave good to excellent yields. The effective palladium loading could be as low as 0.0001 mol% and 0.01-0.1 mol% for iodide and bromide substrates, respectively. The coupling of unactivated aromatic chlorides with arylboronic acids also gave good results using Cs₂CO₃ as base with a 2 mol% palladium loading. The electronic factors from aromatic halides exert a significant influence on the Suzuki coupling catalyzed by the PdCl₂-2 system while the electronic effect from the arylboronic counterparts is negligible. The aromatic halides with modest steric hindrance could also couple smoothly with phenylboronic acids using the PdCl₂-2 catalyst system.     

Sodium 2-(2-pyridin-3-ylethylamino)ethyl sulfonate: an efficient ligand and base for palladium-catalyzed Suzuki reaction in aqueous media

PdCl₂, N-donor ligand and base mediated Suzuki coupling reaction of aryl halides and arylboronic acid in water are described. The corresponding Suzuki products were obtained in good to excellent yields.     

Synthesis of chiral binaphthalenes using the asymmetric Suzuki reaction

The synthesis of atropisomeric 1,1′-binaphthalenes can be achieved using an asymmetric Suzuki cross-coupling reaction. The Suzuki reaction leading to such hindered compounds is challenging and competing hydrolytic deboronation frequently dominates unless carefully chosen conditions are employed. The simple, standard mechanism is inadequate when describing the Suzuki coupling of hindered partners. Evidence suggests that the key step leading to asymmetry is transmetallation (delivery of the organometallic by the asymmetric ligand) and the reactions operate under kinetic control. Reductive elimination (itself likely to be triggered by oxidative addition of another molecule of halide) is fast compared with equilibration (epimerisation and/or cis-trans isomerisation).     

Pd/SiC催化碘代芳烃和芳基硼酸羰化Suzuki偶联反应性能

以高比表面积碳化硅为载体,通过液相还原法制备出Pd/SiC催化剂,并用于催化碘代芳烃和芳基硼酸羰化Suzuki偶联反应.利用X射线衍射、电感耦合等离子体质谱和高分辨透射电子显微镜等对催化剂进行了表征.结果表明, SiC表面的Pd纳米颗粒分散均匀,平均粒径约为2.8 nm.在优化溶剂、碱、压力和温度等反应条件后,发现以3 mmol的K2CO3和10 mL苯甲醚分别为碱和溶剂,1.0 mmol碘苯和1.5 mmol苯硼酸在3 wt% Pd/SiC催化剂存在的条件下,在CO压力为1.0 MPa和100oC下反应8 h即可实现羰化偶联,碘苯转化率为90%,二苯甲酮选择性为99%.并且, Pd/SiC对含有不同官能团的碘代芳烃和芳基硼酸羰化Suzuki偶联反应具有较好的普适性.同时, Pd/SiC也具有较好的稳定性,经5次循环反应后,碘苯转化率从90%降至76%;催化剂活性降低的主要原因是活性组分Pd在有机反应体系中的流失.     

Pd/SiC催化碘代芳烃和芳基硼酸羰化Suzuki偶联反应性能

以高比表面积碳化硅为载体,通过液相还原法制备出Pd/SiC催化剂,并用于催化碘代芳烃和芳基硼酸羰化Suzuki偶联反应.利用X射线衍射、电感耦合等离子体质谱和高分辨透射电子显微镜等对催化剂进行了表征.结果表明, SiC表面的Pd纳米颗粒分散均匀,平均粒径约为2.8 nm.在优化溶剂、碱、压力和温度等反应条件后,发现以3 mmol的K2CO3和10 mL苯甲醚分别为碱和溶剂,1.0 mmol碘苯和1.5 mmol苯硼酸在3 wt% Pd/SiC催化剂存在的条件下,在CO压力为1.0 MPa和100oC下反应8 h即可实现羰化偶联,碘苯转化率为90%,二苯甲酮选择性为99%.并且, Pd/SiC对含有不同官能团的碘代芳烃和芳基硼酸羰化Suzuki偶联反应具有较好的普适性.同时, Pd/SiC也具有较好的稳定性,经5次循环反应后,碘苯转化率从90%降至76%;催化剂活性降低的主要原因是活性组分Pd在有机反应体系中的流失.     

Suzuki reaction of bromoallenes with arylboronic acids using an air-stable palladium complex Pd(Ph_2PCH_2CO_2)_2 as a precatalyst

<正>Suzuki reaction of bromoallenes with arylboronic acids was successfully performed by using an air-stable hemilabile P-O coordinated cyclopalladated complex Pd(Ph_2PCH_2CO_2)_2 as a precatalyst,and the corresponding coupling products were obtained in satisfactory to excellent yields.All products are unknown compounds which were characterized by ~1H NMR,~(13)C NMR,IR,and HRMS.     

Microwave-promoted Suzuki-Miyaura coupling of arylboronic acids with 1-bromo-2-naphthol, o-bromophenol, and o-chlorophenol

In this letter we report a simple and efficient way for the direct Suzuki-Miyaura cross-coupling of unprotected 2-hydroxyaryl bromides and of 2-chlorophenol with arylboronic acids using suitable phosphine/Pd(OAc)₂ catalysts systems with moist K₃PO₄/toluene or moist CsF/dioxane and microwave heating (20 min 105 °C to 3 h 100-120 °C) with an internal temperature control providing 2-hydroxybiaryls in yields up to 98%.     

Iminophosphine-palladium(0) complexes as highly active catalysts in the Suzuki reaction. Synthesis of undecaaryl substituted corroles

The iminophosphine-palladium(0) complex [Pd(dmfu)(P-N)] [dmfu=dimethyl fumarate; P-N=2-(PPh₂)C₆H₄-1-CHNC₆H₄-4-OMe] is a very efficient catalyst for the Suzuki coupling. In the reaction of aryl bromides with phenylboronic acid, turnover numbers up to ca. 200,000 are obtained at 110 °C in 2 h. Good rates are obtained also with the sterically hindered and electronically deactivated 2-bromo-1,3,5-trimethylbenzene. The complex is able to catalyze the exhaustive arylation of 2,3,7,8,12,13,17,18-octabromo-5,10,15-triphenylcorroleCu(III) to yield the corresponding undecaaryl substituted derivative.     

Catalytic activity of η-(olefin)palladium(0) complexes with iminophosphine ligands in the Suzuki-Miyaura reaction. Role of the olefin in the catalyst stabilization

The catalytic activity of η²-(olefin)palladium(0)(iminophosphine) complexes in the Suzuki-Miyaura coupling is strongly dependent on the reaction conditions and on the nature of the ligands. The reaction is at the best carried out in aromatic solvents in the presence of K₂CO₃ at 90-110 °C. Higher reaction rates are obtained when the R substituent on the N-imino group is an aromatic group of low steric hindrance and the olefin is a moderate π-accepting ligand such as dimethyl fumarate. At temperatures lower than 90 °C, a self-catalyzed process leading to catalyst deactivation becomes predominant. Preliminary mechanistic investigations indicate that the oxidative addition of the aryl bromide to a Pd(0) species is the rate determining step in the catalytic cycle and that the olefin plays a key role in catalyst stabilization. Systems in situ prepared by mixing Pd(OAc)₂ or Pd(dba)₂ with 1 equiv of iminophosphine appear substantially less active than the preformed catalysts.     

4-Bromomethyl-2-chlorooxazole--a versatile oxazole cross-coupling unit for the synthesis of 2,4-disubstituted oxazoles

The synthesis of the novel oxazole building block, 4-bromomethyl-2-chlorooxazole, and its palladium-catalysed cross-coupling reactions to make a range of 2,4-disubstituted oxazoles, is described. Selectivity for the 4-bromomethyl position is observed, with Stille coupling effected in good to excellent yields, or Suzuki coupling in moderate yields, to provide a range of 4-substituted-2-chlorooxazoles. Subsequent coupling at the 2-chloro-position can be achieved through either Stille or Suzuki reactions in excellent yields.     

钯催化氟磺酸酚酯Suzuki反应合成三联苯类化合物

发展了一个高效、简便合成三联苯类化合物的方法。以氯化钯为催化剂,碳酸钾与三乙胺为碱,无需加入任何配体,在乙醇水溶液中催化氟磺酸联苯酚酯与芳基硼酸的Suzuki反应,可高效合成含有多种官能团的三联苯类化合物。该方法操作简便,无需氮气保护;且芳基硼酸自偶联副产物少,有利于产品的分离。为三联苯类化合物的合成提供了一条简便而高效的途径。     

HypoGel负载Pd纳米催化剂制备与表征及温和条件下催化Suzuki反应(英文)

A new heterogeneous catalyst composed of Pd nanoparticles immobilized within a HypoG el resin has been prepared in the absence of any ligands using an extensive cross-linking method.This newly developed nanocatalyst was characterized by N_2 adsorption-desorption,X-ray diffraction(XRD),transmission electron microscopy(TEM),scanning electron microscopy(SEM),energy dispersive X-ray(EDX),Fourier transform infrared spectroscopy and inductively coupled plasma-mass spectrometer(ICP-MS)techniques.TEM and XRD results revealed that the Pd nanoparticles were well dispersed with diameters in the range of 4–12 nm,and an average size of about 8 nm.The cross-linked Pd catalyst demonstrated excellent catalytic activity towards the synthesis of a series of biaryl compounds by the reaction of various aryl halides(e.g.,bromides andiodides)with phenylboronic acid in the presence of tetrabutylammonium bromide.ICP-MS analysis indicated that there was only 0.25%weight loss of Pd(0.55±0.02 ppm)from the supported catalyst after the first cycle reaction.Furthermore,the catalyst showed excellent reusability(up to five uses)with consistently high levels of catalytic activity following its recovery by filtration.     

Preparation and characterization of HypoGel-supported Pd nanocatalysts for Suzuki reaction under mild conditions

A new heterogeneous catalyst composed of Pd nanoparticles immobilized within a HypoGel resin has been prepared in the absence of any ligands using an extensive cross-linking method. This new-ly develop...     

Simple and efficient protocol for catalyst recycling and product recovery in the Pd-catalyzed homogeneous Suzuki reaction

Poly(ethylene oxide) (PEO)/methanol can be used as solvent medium for the Pd-catalyzed Suzuki cross-coupling reaction under mild conditions. After the end of the reaction the product is extracted with heptane and the polar phase can be reused several times without any change in the activity. Pure biaryl products are obtained from the nonpolar phase in excellent isolated yields (>90%). The same catalyst-containing polar phase was used to coupling different aryl halides furnishing the biaryl products in good to high isolated yields.