Enthalpy of formation of BaCe<Subscript>0.9</Subscript>In<Subscript>0.1</Subscript>O<Subscript>3−δ</Subscript>(s)

Enthalpy of formation of the perovskite-related oxide BaCe_0.9In_0.1O_2.95 has been determined at 298.15 K by solution calorimetry. Solution enthalpies of barium cerate doped with indium and mixture of BaCl₂, CeCl₃, InCl₃ in ratio 1:0.9:0.1 have been measured in 1 M HCl with 0.1 M KI. The standard formation enthalpy of BaCe_0.9In_0.1O_2.95 has been calculated as −1611.7±2.6 kJ mol⁻¹. Room-temperature stability of this compound has been assessed in terms of parent binary oxides. The formation enthalpy of barium cerate doped by indium from the mixture of binary oxides is Δ_ox H ⁰ (298.15 K)=−36.2±3.4 kJ mol⁻¹.     

Low-temperature thermodynamic properties of <Emphasis Type="Italic">L</Emphasis>-cysteine

Heat capacity C _p(T) of the orthorhombic polymorph of L-cysteine was measured in the temperature range 6–300 K by adiabatic calorimetry; thermodynamic functions were calculated based on these measurements. At 298.15 K the values of heat capacity, C _p; entropy, S _m⁰(T)-S _m⁰(0); difference in the enthalpy, H _m⁰(T)-H _m⁰(0), are equal, respectively, to 144.6±0.3 J K⁻¹ mol⁻¹, 169.0±0.4 J K⁻¹ mol⁻¹ and 24960±50 J mol⁻¹. An anomaly of heat capacity near 70 K was registered as a small, 3–5% height, diffuse ‘jump’ accompanied by the substantial increase in the thermal relaxation time. The shape of the anomaly is sensitive to thermal pre-history of the sample.     

Thermodynamic investigation of several natural polyols

The low-temperature heat capacity C _p,m of erythritol (C₄H₁₀O₄, CAS 149-32-6) was precisely measured in the temperature range from 80 to 410 K by means of a small sample automated adiabatic calorimeter. A solid-liquid phase transition was found at T=390.254 K from the experimental C _p-T curve. The molar enthalpy and entropy of this transition were determined to be 37.92±0.19 kJ mol⁻¹ and 97.17±0.49 J K⁻¹ mol⁻¹, respectively. The thermodynamic functions [H _T-H _298.15] and [S _T-S _298.15], were derived from the heat capacity data in the temperature range of 80 to 410 K with an interval of 5 K. The standard molar enthalpy of combustion and the standard molar enthalpy of formation of the compound have been determined: Δ_c H _m⁰(C₄H₁₀O₄, cr)= −2102.90±1.56 kJ mol⁻¹ and Δ_f H _m⁰(C₄H₁₀O₄, cr)= − 900.29±0.84 kJ mol⁻¹, by means of a precision oxygen-bomb combustion calorimeter at T=298.15 K. DSC and TG measurements were performed to study the thermostability of the compound. The results were in agreement with those obtained from heat capacity measurements.     

Heat capacity,enthalpy and entropy of calcium niobates

Heat capacity and enthalpy increments of calcium niobates CaNb₂O₆ and Ca₂Nb₂O₇ were measured by the relaxation time method (2–300 K), DSC (260–360 K) and drop calorimetry (669–1421 K). Temperature dependencies of the molar heat capacity in the form C _pm=200.4+0.03432T−3.450·10⁶/T ² J K⁻¹ mol⁻¹ for CaNb₂O₆ and C _pm=257.2+0.03621T−4.435·10⁶/T ² J K⁻¹ mol⁻¹ for Ca₂Nb₂O₇ were derived by the least-squares method from the experimental data. The molar entropies at 298.15 K, S _m⁰(CaNb₂O₆, 298.15 K)=167.3±0.9 J K⁻¹ mol⁻¹ and S _m⁰(Ca₂Nb₂O₇, 298.15 K)=212.4±1.2 J K⁻¹ mol⁻¹, were evaluated from the low temperature heat capacity measurements. Standard enthalpies of formation at 298.15 K were derived using published values of Gibbs energy of formation and presented heat capacity and entropy data: Δ_f H ⁰(CaNb₂O₆, 298.15 K)= −2664.52 kJ mol^t-1 and Δ_f H ⁰(Ca₂Nb₂O₇, 298.15 K)= −3346.91 kJ mol⁻¹.     

Molar heat capacities and standard molar enthalpy of formation of 2-amino-5-methylpyridine

The heat capacities (C _p,m) of 2-amino-5-methylpyridine (AMP) were measured by a precision automated adiabatic calorimeter over the temperature range from 80 to 398 K. A solid-liquid phase transition was found in the range from 336 to 351 K with the peak heat capacity at 350.426 K. The melting temperature (T _m), the molar enthalpy (Δ_fus H _m⁰), and the molar entropy (Δ_fus S _m⁰) of fusion were determined to be 350.431±0.018 K, 18.108 kJ mol⁻¹ and 51.676 J K⁻¹ mol⁻¹, respectively. The mole fraction purity of the sample used was determined to be 0.99734 through the Van’t Hoff equation. The thermodynamic functions (H _T-H _298.15 and S _T-S _298.15) were calculated. The molar energy of combustion and the standard molar enthalpy of combustion were determined, ΔU _c(C₆H₈N₂,cr)= −3500.15±1.51 kJ mol⁻¹ and Δ_c H _m⁰ (C₆H₈N₂,cr)= −3502.64±1.51 kJ mol⁻¹, by means of a precision oxygen-bomb combustion calorimeter at T=298.15 K. The standard molar enthalpy of formation of the crystalline compound was derived, Δ_r H _m⁰ (C₆H₈N₂,cr)= −1.74±0.57 kJ mol⁻¹.     

Heat capacity and heat content of BiNb<Subscript>5</Subscript>O<Subscript>14</Subscript>

The heat capacity and the heat content of bismuth niobate BiNb₅O₁₄ were measured by the relaxation time method, DSC and drop method, respectively. The temperature dependence of heat capacity in the form C _pm=455.84+0.06016T–7.7342·10⁶/T ² (J K^–1 mol^–1) was derived by the least squares method from the experimental data. Furthermore, the standard molar entropy at 298.15 K S _m=397.17 J K^–1 mol^–1 was derived from the low temperature heat capacity measurement.     

Standard molar enthalpy of formation of CH<Subscript>3</Subscript>(CH<Subscript>3</Subscript>SCH<Subscript>2</Subscript>)SO,methyl methylthiomethyl sulfoxide

Summary The standard molar enthalpy of formation of methyl methylthiomethyl sulfoxide, CH₃(CH₃SCH₂)SO, at T=298.15 K in the liquid state was determined to be -199.4±1.5 kJ mol^-1 by means of oxygen rotating-bomb combustion calorimetry.     

Standard molar enthalpies of formation and sublimation of <Emphasis Type="Italic">N</Emphasis>-phenylphthalimide

The standard (p ⁰=0.1 MPa) molar enthalpy of formation, Δ_f H ⁰ _m, for crystalline N-phenylphthalimide was derived from its standard molar enthalpy of combustion, in oxygen, at the temperature 298.15 K, measured by static bomb-combustion calorimetry, as –206.0±3.4 kJ mol^–1. The standard molar enthalpy of sublimation, Δ^g _cr H ⁰ _m , at T=298.15 K, was derived, from high temperature Calvet microcalorimetry, as 121.3±1.0 kJ mol^–1. The derived standard molar enthalpy of formation, in the gaseous state, is analysed in terms of enthalpic increments and interpreted in terms of molecular structure.     

Thermochemical properties of MnNb<Subscript>2</Subscript>O<Subscript>6</Subscript>

Homogeneous manganocolumbite (MnNb₂O₆) was synthesized from Nb₂O₅ and MnO oxides. Powder sample was orthorhombic with unit cell parameters: α = 0.5766 nm, b = 1.4439 nm, c = 0.5085 nm and V = 0.4234 nm³. Heat capacity over the temperature range of 313–1253 K was measured in an inert atmosphere with combined thermogravimetry and calorimetry using NETZSCH STA 449C Jupiter thermoanalyzer. Melting point was 1767 ± 3 K, enthalpy of melting was 144 ± 4 kJ mol⁻¹. Experimental heat capacity of MnNb₂O₆ is fitted to polynomial C _pm = 221.46 + 3.03 · 10⁻³ T + −39.79 · 10⁵ T ⁻² + 40.59 · 10⁻⁶ T ².     

Low-temperature thermodynamic properties of <Emphasis Type="SmallCaps">dl</Emphasis>-cysteine

Heat capacity C _p(T) of the crystalline dl-cysteine was measured on heating the system from 6 to 309 K by adiabatic calorimetry; thermodynamic functions were calculated based on these data smoothed in the temperature range 6–273.15 K. The values of heat capacity, entropy, and enthalpy at 273.15 K were equal to 142.4, 153.3, and 213.80 J K⁻¹ mol⁻¹, respectively. At about 300 K, a heat capacity peak was observed, which was interpreted as an evidence of a first-order phase transition. The enthalpy and the entropy of the transition are equal, respectively, to 2300 ± 50 and 7.6 ± 0.1 J K⁻¹ mol⁻¹.     

Heat capacities and thermodynamic properties of (<Emphasis Type="Italic">S</Emphasis>)-<Emphasis Type="Italic">tert</Emphasis>-butyl 1-phenylethylcarbamate

An N-tert-butyloxycarbonylated organic synthesis intermediate, (S)-tert-butyl 1-phenylethylcarbamate, was prepared and investigated by means of differential scanning calorimetry (DSC) and thermogravimetry (TG). The molar heat capacities of (S)-tert-butyl 1-phenylethylcarbamate were precisely determined by means of adiabatic calorimetry over the temperature range of 80-380 K. There was a solid–liquid phase transition exhibited during the heating process with the melting point of 359.53 K. The molar enthalpy and entropy of this transition were determined to be 29.73 kJ mol⁻¹ and 82.68 J K⁻¹ mol⁻¹ based on the experimental C _p–T curve, respectively. The thermodynamic functions, [H_T⁰ - H_298.15⁰ H_{T}^{0} - H_{298.15}^{0} ] and [S_T⁰ - S_298.15⁰ S_{T}^{0} - S_{298.15}^{0} ], were calculated from the heat capacity data in the temperature range of 80–380 K with an interval of 5 K. TG experiment showed that the pyrolysis of the compound was started at the temperature of 385 K and terminated at 510 K within one step.     

Enthalpy of formation of talc Mg<Subscript>3</Subscript>[Si<Subscript>4</Subscript>O<Subscript>10</Subscript>](OH)<Subscript>2</Subscript> according to dissolution calorimetry

A thermochemical study of natural talc was performed by high-temperature melt dissolution calorimetry on a Tian-Calvet calorimeter. Based on the total values of the increment in enthalpy upon heating the sample from room temperature to 973 K, and of the dissolution enthalpy at 973 K measured in this work for talc and gibbsite (along with those determined for tremolite, brucite, and their corresponding oxides), the enthalpy of formation was calculated for talc composed of elements, Mg₃[Si₄O₁₀](OH)₂, at 298.15 K: Δ_f H _el^o(298.15 K) = −5900.6 ± 4.7 kJ/mol.     

Heat capacities and absolute entropies of UTi<Subscript>2</Subscript>O<Subscript>6</Subscript> and CeTi<Subscript>2</Subscript>O<Subscript>6</Subscript>

Summary As part of a larger study of the physical properties of potential ceramic hosts for nuclear wastes, we report the molar heat capacity of brannerite (UTi₂O₆) and its cerium analog (CeTi₂O₆) from 10 to 400 K using an adiabatic calorimeter. At 298.15 K the standard molar heat capacities are (179.46±0.18) J K^-1 mol^-1 for UTi₂O₆ and (172.78±0.17) J K^-1 mol^-1 for CeTi₂O₆. Entropies were calculated from smooth fits of the experimental data and were found to be (175.56±0.35) J K^-1 mol^-1 and (171.63±0.34) J K^-1 mol^-1 for UTi₂O₆ and CeTi₂O₆, respectively. Using these entropies and enthalpy of formation data reported in the literature, Gibb’s free energies of formation from the elements and constituent oxides were calculated. Standard free energies of formation from the elements are (-2814.7±5.6) kJ mol^-1 for UTi₂O₆ and (-2786.3±5.6) kJ mol^-1 for CeTi₂O₆. The free energy of formation from the oxides at T=298.15 K are (-5.31±0.01) kJ mol^-1 and (15.88±0.03) kJ mol^-1 for UTi₂O₆ and CeTi₂O₆, respectively.     

Heat capacities and thermodynamic properties of 2-benzoylpyridine (C12H9NO)

The heat capacities of 2-benzoylpyridine were measured with an automated adiabatic calorimeter over the temperature range from 80 to 340 K. The melting point, molar enthalpy, Δ_fusH^m, and entropy, Δ_fusS^m, of fusion of this compound were determined to be 316.49±0.04 K, 20.91±0.03 kJ mol^–1 and 66.07±0.05 J mol^–1 K^–1, respectively. The purity of the compound was calculated to be 99.60 mol% by using the fractional melting technique. The thermodynamic functions (H_T–H_298.15) and (S_T–S_298.15) were calculated based on the heat capacity measurements in the temperature range of 80–340 K with an interval of 5 K. The thermal properties of the compound were further investigated by differential scanning calorimetry (DSC). From the DSC curve, the temperature corresponding to the maximum evaporation rate, the molar enthalpy and entropy of evaporation were determined to be 556.3±0.1 K, 51.3±0.2 kJ mol^–1 and 92.2±0.4 J K^–1 mol^–1, respectively, under the experimental conditions.     

Thermodynamic Properties of Hydrofullerene C60H36 from 5 to 340 K

The temperature dependence of the molar heat capacity (C⁰ _p) of hydrofullerene C₆₀H₃₆ between 5 and 340 K was determined by adiabatic vacuum calorimetry with an error of about 0.2%. The experimental data were used for the calculation of the thermodynamic functions of the compound in the range 0 to340 K. It was found that at T=298.15 K and p=101.325 kPa C⁰ _p (298.15)=690.0 J K⁻¹ mol⁻¹,H^o(298.15)−H^o(0)= 84.94 kJ mol⁻¹,S^o(298.15)=506.8 J K⁻¹ mol⁻¹, G^o(298.15)−H^o(0)= −66.17 kJ mol⁻¹. The standard entropy of formation of hydrofullerene C₆₀H₃₆ and the entropy of reaction of its formation by hydrogenation of fullerene C₆₀ with hydrogen were estimated and at T=298.15 K they were Δ_fS^o= −2188.4 J K⁻¹ mol⁻¹ and Δ_rS^o= −2270.5 J K⁻¹mol⁻¹, respectively. This revised version was published online in July 2006 with corrections to the Cover Date.     

Standard molar enthalpies of formation of [RE(Gly)<Subscript>4</Subscript>(Im)(H<Subscript>2</Subscript>O)](ClO<Subscript>4</Subscript>)<Subscript>3</Subscript> (<Emphasis Type="Italic">RE</Emphasis>=Eu,Sm)

The two complexes, [RE(Gly)₄(Im)(H₂O)](ClO₄)₃(s)(RE = Eu, Sm), have been synthesized and characterized. The standard molar enthalpies of reaction for the following reactions, RECl₃·6H₂O(s)+4Gly(s)+Im(s)+3NaClO₄(s) = =[RE(Gly)₄(Im)(H₂O)](ClO₄)₃(s)+3NaCl(s)+5H₂O(l), were determined by solution-reaction colorimetry. The standard molar enthalpies of formation of the two complexes at T = 298.15 K were derived as Δ_f H _m^Θ {Eu(Gly)₄(Im)(H₂O)}(ClO₄)₃(s)} = = −(3396.6±2.3) kJ mol⁻¹ and Δ_f H _m^Θ {Sm(Gly)₄(Im)(H₂O)}(ClO₄)₃(s)} = −(3472.7±2.3) kJ mol⁻¹, respectively.     

Thermodynamic investigation of several natural polyols (II)

The low-temperature heat capacity C _p,m of sorbitol was precisely measured in the temperature range from 80 to 390 K by means of a small sample automated adiabatic calorimeter. A solid-liquid phase transition was found at T=369.157 K from the experimental C _p-T curve. The dependence of heat capacity on the temperature was fitted to the following polynomial equations with least square method. In the temperature range of 80 to 355 K, C _p,m/J K⁻¹ mol⁻¹=170.17+157.75x+128.03x ²-146.44x ³-335.66x ⁴+177.71x ⁵+306.15x ⁶, x= [(T/K)−217.5]/137.5. In the temperature range of 375 to 390 K, C _p,m/J K⁻¹ mol⁻¹=518.13+3.2819x, x=[(T/K)-382.5]/7.5. The molar enthalpy and entropy of this transition were determined to be 30.35±0.15 kJ mol⁻¹ and 82.22±0.41 J K⁻¹ mol⁻¹ respectively. The thermodynamic functions [H _T-H _298.15] and [S _T-S 298.15], were derived from the heat capacity data in the temperature range of 80 to 390 K with an interval of 5 K. DSC and TG measurements were performed to study the thermostability of the compound. The results were in agreement with those obtained from heat capacity measurements.     

Determination of the enthalpy of fusion of K<Subscript>3</Subscript>TaO<Subscript>2</Subscript>F<Subscript>4</Subscript> and KTaF<Subscript>6</Subscript>

Areas of fusion and crystallization peaks of K₃TaO₂F₄ and KTaF₆ were measured using the DSC mode of a high-temperature calorimeter (SETARAM 1800 K). On the basis of these quantities, considering the temperature dependence of the calorimeter sensitivity, values of the fusion enthalpy of K₃TaO₂F₄ at the fusion temperature of 1181 K of (43 ± 4) kJ mol⁻¹ and of KTaF₆ at the fusion temperature of 760 K of (8 ± 1) kJ mol⁻¹ were determined.     

Heat capacity and magnetic phase transition of two-dimensional metal-assembled complex (NEt<Subscript>4</Subscript>)[{Mn<Superscript>III</Superscript>(salen)}<Subscript>2</Subscript>Fe<Superscript>III</Superscript>(CN)<Subscript>6</Subscript>]

Summary Heat capacity measurements of the two-dimensional metal-assembled complex, (NEt₄)[{Mn^III(salen)}₂Fe^III(CN)₆] [Et=ethyl, salen= N,N’-ethylenebis(salicylideneaminato) dianion], were performed in the temperature range between 0.2 and 300 K by adiabatic calorimetry. A ferrimagnetic phase transition was observed at T_c1=7.51 K. Furthermore, another small magnetic phase transition appeared at T_c2=0.78 K. Above T_c1, a heat capacity tail arising from the short-range ordering of the spins characteristic of two-dimensional magnets was found. The magnetic enthalpy and entropy were evaluated to be ΔH=291 J mol^-1 and ΔS=27.4 J K^-1 mol^-1, respectively. The experimental magnetic entropy agrees roughly with ΔS=Rln(5·5·2) (=32.5 J K^-1 mol^-1; R being the gas constant), which is expected for the metal complex with two Mn(III) ions in high-spin state (spin quantum number S=2) and one Fe(III) ion in low-spin state (S=1/2). The heat capacity tail above T_c1 became small by grinding and pressing the crystal. This mechanochemical effect would be attributed to the increase of lattice defects and imperfections in the crystal lattice, leading not only to formation of the crystal with a different magnetic phase transition temperature but also to decrease of the magnetic heat capacity and thus the magnetic enthalpy and entropy.     

Low-temperature heat capacity and high-temperature thermal behavior of sodium lutetium molybdate phosphate Na<Subscript>2</Subscript>Lu(MoO<Subscript>4</Subscript>)(PO<Subscript>4</Subscript>)

The low-temperature heat capacity of Na₂Lu (MoO₄)(PO₄) was measured by adiabatic calorimetry in the range of 7.47–345.74 K. The experimental data were used to calculate the thermodynamic functions of Na₂Lu (MoO₄)(PO₄). At 298.15 K, the following values were obtained: C _p ⁰ (298.15 K) = 237.7 ± 0.1 J/(K mol), S ⁰(298.15 K) = 278.1 ± 0.8 J/(K mol), H ⁰(298.15 K) ? H ⁰ (0 K) = 42330 ± 20 J/mol, and Φ⁰(298.15 K) = 136.1 ± 0. 3 J/(K mol). A heat capacity anomaly was found in the range of 10-67 K with a maximum at T _tr = 39.18 K. The entropy and enthalpy of transition are ΔS = 12.39 ± 0.75 J/(K mol) and ΔH = 403 ± 16 J/mol. The thermal investigation of sodium lutetium molybdate phosphate in the high-temperature range (623–1223 K) was performed using differential scanning calorimetry. It was found that during melting in the range of 1030–1200 K, Na₂Lu(MoO₄)(PO₄) degrades to simpler compounds; the degradation scenario is verified by X-ray powder diffraction.