共查询到20条相似文献,搜索用时 31 毫秒
1.
Novel method for in-situ surfactant-based solid-phase extraction: application to the determination of Co(II) and Ni(II) in aqueous samples 总被引:1,自引:0,他引:1
We report on a completely new kind of solid phase extraction which we term in-situ surfactant-based solid-phase extraction (ISS-SPE). It represents a simple and rapid method for extraction from aqueous samples and preconcentration of compounds containing hydrophobic (alkyl) groups. A cationic surfactant containing alkyl chain is dissolved in the aqueous sample. Following the addition of hexafluorophosphate (HFP; an ion-pairing anion), solutions turn cloudy due to the interaction between the surfactant and the HFP ion. This is due to the formation of fine solid particles composed of the HFP salt of the cationic surfactant. The alkyl groups of the surfactant in the solid particles strongly interact with hydrophobic groups of analytes and become bound. The solid particles are centrifuged, and the sedimented particles can be either dissolved in an appropriate organic solvent, or leached with a solvent to recover the absorbed analyte(s). The method presented here has distinct advantages in that the extraction times are short and recoveries are high, probably a result of the formation of very fine particles of large specific surface, and of their good dispersion in the sample solution. The performance of ISS-SPE was demonstrated by extracting chelates of Co(II) and Ni(II) from water samples. Under the optimized conditions, the preconcentration factors are 51 and 45, respectively, and the detection limits are 0.9 and 0.6???g?L?1. The method was validated by the analysis of a certified reference material and by comparing results with those obtained by electrothermal AAS. Figure
In ISS-SPE method, a cationic surfactant containing alkyl chain is dissolved in aqueous sample. After addition of hexafluorophosphate anion, a cloudy solution is formed due to formation of fine solid particles (surfactant hexafluorophosphate salt). Hydrophobic anaytes can be adsorbed on the alkyl group of the solid particles and extracted. 相似文献
2.
Hang Jiang Prof. Liangzhi Hong Prof. Yunxing Li Prof. To Ngai 《Angewandte Chemie (International ed. in English)》2018,57(36):11662-11666
Colloidosomes have received considerable attention for the controlled delivery of active ingredients in medicine, agrochemicals, and cosmetics. However, most reported colloidosomes are highly permeable and size is larger than 1 μm. All silica colloidosomes have now been prepared with adjustable size, compact shell and low permeability. Our approach is based on the formation of inverse water‐in‐oil (w/o) emulsions stabilized solely by hydrophobic silica nanoparticles and subsequent locking of the particle at the oil–water interface by a simple sol–gel reaction of silica precursor at room temperature. The colloidosomes obtained display a robust and closed shell, ensuring a long‐term retention of small hydrophilic molecules such as Methylene Blue. Remarkably, unlike all other reported silica colloidosomes, a timely and stepwise release of the encapsulated cargo can be triggered by adding ethanol or surfactant without destroying the capsule shell. 相似文献
3.
The wettability of montmorillonite could be in situ modified by cationic surfactant cetyltrimethylammonium bromide (CTAB). The type and stability of emulsions prepared from montmorillonite with different concentrations of cationic surfactant were investigated, and a double phase inversion of emulsions was observed. The adsorption of CTAB on montmorillonite particles was studied by surface tension and zeta potential measurements, and the variation of the wettability of particles with the concentration of CTAB was characterized by the contact angle measurements. The adsorption of particles at the surface of emulsion droplets was observed by laser-induced confocal scanning microscopy. At low surfactant concentrations, the adsorption of CTAB on montmorillonite increased the hydrophobicity of the particles, and the stability of oil-in-water emulsions was enhanced. With the increase of the CTAB concentration, montmorillonite particles changed from hydrophilic to hydrophobic, and water-in-oil emulsions were obtained. However, at higher surfactant concentrations, the emulsions inverts to O/W again because montmorillonite particles were reconverted into hydrophilic due to the formation of CTAB bilayer on the surface of montmorillonite. 相似文献
4.
The flocculation behavior of anionic and cationic latex dispersions induced by addition of ionic surfactants with different polarities (SDS and cetyltrimethylammonium bromide (CTAB)) have been evaluated by rheological measurements. It was found that in identical polar surfactant systems with particle surfaces of SDS + anionic lattices and CTAB + cationic lattices, a weak and reversible flocculation has been observed in a limited concentration region of surfactant, which was analyzed as a repletion flocculation induced by the volume-restriction effect of the surfactant micelles. On the other hand, in oppositely charged surfactant systems (SDS + cationic lattices and CTAB + anionic lattices), the particles were flocculated strongly in a low surfactant concentration region, which will be based on the charge neutralization and hydrophobic effects from the adsorbed surfactant molecules. After the particles stabilized by the electrostatic repulsion of adsorbed surfactant layers, the system viscosity shows a weak maximum again in a limited concentration region. This weak maximum was influenced by the shear rate and has a complete reversible character, which means that this weak flocculation will be due to the depletion effect from the free micelles after saturated adsorption. 相似文献
5.
Synergistic interaction in emulsions stabilized by a mixture of silica nanoparticles and cationic surfactant 总被引:2,自引:0,他引:2
Binks BP Rodrigues JA Frith WJ 《Langmuir : the ACS journal of surfaces and colloids》2007,23(7):3626-3636
Using a range of complementary experiments, a detailed investigation into the behavior of dodecane-water emulsions stabilized by a mixture of silica nanoparticles and pure cationic surfactant has been made. Both emulsifiers prefer to stabilize o/w emulsions. At high pH, particles are ineffective emulsifiers, whereas surfactant-stabilized emulsions become increasingly stable to coalescence with concentration. In mixtures, no emulsion phase inversion occurs although synergism between the emulsifiers leads to enhanced stability at either fixed surfactant concentration or fixed particle concentration. Emulsions are most stable under conditions where particles have negligible charge and are most flocculated. Freeze fracture scanning electron microscopy confirms the presence of particle flocs at drop interfaces. At low pH, particles and surfactant are good emulsifiers alone. Synergism is also displayed in these mixtures, with the extent of creaming being minimum when particles are most flocculated. Experiments have been undertaken in order to offer an explanation for the latter synergy. By determining the adsorption isotherm of surfactant on particles in water, we show that surfactant addition initially leads to particle flocculation followed by re-dispersion. Using suitable contact angle measurements at oil-water-solid interfaces, we show that silica surfaces initially become increasingly hydrophobic upon surfactant addition, as well as surfactant adsorption lowering the oil-water interfacial tension. A competition exists between the influence of surfactant on the contact angle and the tension in the attachment energy of a particle to the interface. 相似文献
6.
Ata S 《Langmuir : the ACS journal of surfaces and colloids》2008,24(12):6085-6091
The interaction between two bubbles coated with glass particles in the presence of a cationic surfactant (cetyltrimethylammonium bromide, CTAB) was studied experimentally. The time taken for two bubbles to coalesce was determined as a function of the fractional coverage of the surface by particles. The results suggested that the coalescence time increases with the bubble surface coverage. Interestingly, it was found that although the particles did not have any physical role in film rupture at low surface coverage, they still added resistance to film drainage. For particle-loaded bubbles, the initial resistance was due to the lateral capillary interactions between particles on the interface, which hold the particles firmly together. The coalescence dynamics of bubbles was also observed to be affected by the presence of attached particles. 相似文献
7.
DNA(包括寡聚核苷酸)和阳离子表面活性剂可形成难溶复合物.本文通过浊度测试和透射电子显微镜观察,发现单链阳离子表面活性剂可以诱使寡聚核苷酸/单链阳离子表面活性剂沉淀转变成为寡聚核苷酸/单链阳离子表面活性剂囊泡,且寡聚核苷酸/单链阳离子表面活性剂囊泡可以与寡聚核苷酸/单链阳离子表面活性剂沉淀共存.在寡聚核苷酸/单链阳离子表面活性剂沉淀向囊泡的转变过程中,表面活性剂和沉淀之间的疏水作用力发挥了重要作用.此外,当体系温度达到寡聚核苷酸开始融解的温度后,寡聚核苷酸/单链阳离子表面活性剂体系更容易形成囊泡.因此,寡聚核苷酸的链越伸展,越易于寡聚核苷酸/单链阳离子表面活性剂囊泡的生成.据我们所知,有关寡聚核苷酸/阳离子表面活性剂囊泡的报道尚不多见.因此,考虑到DNA(包括寡聚核苷酸)/两亲分子体系在医学、生物学、药学和化学中的重要性,该研究应该有助于我们进一步了解该体系并对其进行更合理有效的应用. 相似文献
8.
This paper is concerned with the detachment of particles from coalescing bubble pairs. Two bubbles were generated at adjacent capillaries and coated with hydrophobic glass particles of mean diameter 66 μm. The bubbles were then positioned next to each other until the thin liquid film between them ruptured. The particles that dropped from the bubble surface during the coalescence process were collected and measured. The coalescence process was very vigorous and observations showed that particles detached from the bubble surfaces as a result of the oscillations caused by coalescence. The attached particles themselves and, to some extent the presence of the surfactant had a damping affect on the bubble oscillation, which played a decisive role on the particle detachment phenomena. The behaviour of particles on the surfaces of the bubbles during coalescence was described, and implications of results for the flotation process were discussed. 相似文献
9.
纳米SiO2与阳离子表面活性剂的相互作用及其诱导的正辛烷-水乳状液的双重相转变 总被引:1,自引:0,他引:1
研究了3种不同结构的水溶性阳离子表面活性剂对纳米二氧化硅颗粒的原位表面活性化作用, 它们分别是单头单尾的十六烷基三甲基溴化铵(CTAB)、单头双尾的双十二烷基二甲基溴化铵(di-C12DMAB)和双头双尾的Gemini型阳离子三亚甲基-二(十四酰氧乙基溴化铵)(II-14-3), 并通过测定Zeta电位、吸附等温线及接触角等参数对相关机理进行了阐述. 结果表明, 阳离子表面活性剂吸附到颗粒/水界面形成以疏水基朝向水的单分子层, 从而增强了颗粒表面的疏水性是原位表面活性化的基础. 通过吸附CTAB和II-14-3, 颗粒的疏水性适当增强, 能吸附到正辛烷/水界面稳定O/W(1)型乳状液; 而通过吸附di-C12DMAB所形成的单分子层更加致密, 颗粒的疏水性进一步增强, 进而使乳状液从O/W(1)型转变为W/O型; 当表面活性剂浓度较高时, 由于链-链相互作用, 表面活性剂分子将在颗粒/水界面形成双层吸附, 使颗粒表面变得亲水而失去活性, 但此时体系中游离表面活性剂的浓度已增加到足以单独稳定O/W(2)型乳状液的程度. 因此当采用纳米二氧化硅和di-C12DMAB的混合物作乳化剂时, 通过增加di-C12DMAB的浓度即可诱导乳状液发生O/W(1)→W/O→O/W(2)双重相转变. 相似文献
10.
Redispersable and weakly cross-linked block copolymer particles with a core-shell structure were prepared by the use of a macroinitiator. Subsequent sulfonation of the polystyrene core and complex formation with a variety of cationic surfactants led to sterically stabilized, redispersable polyelectrolyte-surfactant complex particles with spherical shape and diameters of about 400 nm. Spontaneous microphase separation of the hydrophobic surfactant tails and the hydrophilic entities of the polyelectrolyte and the surfactant headgroups induces mesostructure formation within the particle cores. The characteristic lengths of the mesostructures formed depend mainly on the chain lengths of the surfactants and vary between 2 and 4 nm. For the first time, preformed nanoparticles were used as constrained nanogeometries for polyelectrolyte-surfactant complex formation. 相似文献
11.
Petkova R Tcholakova S Denkov ND 《Langmuir : the ACS journal of surfaces and colloids》2012,28(11):4996-5009
Solutions of surfactant-polymer mixtures often exhibit different foaming properties, compared to the solutions of the individual components, due to the strong tendency for formation of polymer-surfactant complexes in the bulk and on the surface of the mixed solutions. A generally shared view in the literature is that electrostatic interactions govern the formation of these complexes, for example between anionic surfactants and cationic polymers. In this study we combine foam tests with model experiments to evaluate and explain the effect of several polymer-surfactant mixtures on the foaminess and foam stability of the respective solutions. Anionic, cationic, and nonionic surfactants (SDS, C(12)TAB, and C(12)EO(23)) were studied to clarify the role of surfactant charge. Highly hydrophilic cationic and nonionic polymers (polyvinylamine and polyvinylformamide, respectivey) were chosen to eliminate the (more trivial) effect of direct hydrophobic interactions between the surfactant tails and the hydrophobic regions on the polymer chains. Our experiments showed clearly that the presence of opposite charges is not a necessary condition for boosting the foaminess and foam stability in the surfactant-polymer mixtures studied. Clear foam boosting (synergistic) effects were observed in the mixtures of cationic surfactant and cationic polymer, cationic surfactant and nonionic polymer, and anionic surfactant and nonionic polymer. The mixtures of anionic surfactant and cationic polymer showed improved foam stability, however, the foaminess was strongly reduced, as compared to the surfactant solutions without polymer. No significant synergistic or antagonistic effects were observed for the mixture of nonionic surfactant (with low critical micelle concentration) and nonionic polymer. The results from the model experiments allowed us to explain the observed trends by the different adsorption dynamics and complex formation pattern in the systems studied. 相似文献
12.
A method using safe and mild conditions to prepare water-core colloidosomes of a few micrometers in size is examined. Using poly(styrene-co-butylacrylate) colloidal particles of 180 nm in size, with a low-temperature glass transition of 30 or 42 degrees C, the self-assembly into micrometer-sized water-core polymer shell particles is demonstrated. The effect of oil phase type, surfactant and cosolvent, sintering time, and the method of transfer into an aqueous phase are all examined. The work demonstrates the production of water-core rigid-shell colloidosomes at low temperatures, between 35 and 65 degrees C. 相似文献
13.
Douglas W. Fuerstenau Renhe Jia 《Colloids and surfaces. A, Physicochemical and engineering aspects》2004,250(1-3):223-231
This research was directed at understanding cationic surfactant adsorption phenomena on wet-ground natural quartz, mainly with dodecylpyridinium chloride as the model surfactant. How these surfactant ions adsorb at the interface was delineated through measurements of adsorption isotherms, zeta potentials, suspension stability, contact angles, induction times, and flotation response. Hydrocarbon chain association of adsorbed surfactant ions (or self-association) leads to four distinct adsorption regions as the concentration of surfactant is increased in solution. The same four regions manifest themselves in the behavior of all of the interfacial processes studied. At low concentrations, adsorption is controlled primarily by electrostatic interactions, but when the adsorbed surfactant ions begin to associate into hemimicelles at the surface, hydrophobic chain interactions control the adsorption process. The results of experiments with alkylpyridinium chlorides of 12, 14 and 16 carbon atoms can be normalized in terms of their CMCs, which clearly show that surface aggregation phenomena are driven by the same hydrophobic interactions that lead to micelle formation in bulk solution. 相似文献
14.
Samokhina L Schrinner M Ballauff M Drechsler M 《Langmuir : the ACS journal of surfaces and colloids》2007,23(7):3615-3619
The formation of a complex between an anionic spherical polyelectrolyte brush (SPB) and the cationic surfactant cetyltrimethylammonium bromide (CTAB) is investigated. The SPB consists of long chains of the strong polyelectrolyte poly(styrene sulfonate) (PSS), which are bound chemically to a solid poly(styrene) core of 56 nm in radius. The SPB are dispersed in water, and the ionic strength is adjusted by addition of NaBr. The resulting complexes are investigated in dilute solution by dynamic light scattering, by electrophoretic light scattering, and by cryogenic transmission electron microscopy (cryo-TEM). The formation of the complex between the SPB and the surfactant can be monitored by a strong shrinking of the surface layer when adding CTAB to dilute suspensions (0.01 wt %) and by a decrease of the effective charge of the complexes. Complex formation starts at CTAB concentrations lower than the critical micelle concentration of this surfactant. If the ratio r of the charges on the SPB to the charge of the added surfactant is exceeding unity, the particles start to flocculate. Cryo-TEM images of the complexes at r = 0.6 measured in salt-free solution show that the surface layer composed of the PSS chains and the adsorbed CTAB molecules is partially collapsed: A part of the chains form a dense surface layer while another part of the chains or aggregates thereof are still sticking out. This can be deduced from the cryo-TEM micrographs as well as from the hydrodynamic radius, which is still of appreciable magnitude. The 1:1 complex (r = 1.0) exhibits a fully collapsed layer formed by the PSS chains and CTAB. If the complex is formed in the presence of 0.05 M NaBr, r = 0.6 leads to globular structures directly attached to the surface of the core particles. All structures seen in the cryo-TEM images can be explained by a collapse transition of the surface layer brought about by the hydrophobic attraction between the polyelectrolyte chains that became partially hydrophobic through adsorption of CTAB. 相似文献
15.
The migration behavior of cationic solutes and influences of the interactions of cationic solutes with sodium dodecyl sulfate (SDS) on the formation of micelles and its critical micelle concentration (CMC) were investigated by capillary electrophoresis at neutral pH. Catecholamines and structurally related compounds, including epinephrine, norepinephrine, dopamine, norephedrine, and tyramine, which involve different extents of hydrophobic, ionic and hydrogen-bonding interactions with SDS surfactant, are selected as cationic solutes. The dependence of the effective electrophoretic mobility of cationic solutes on the concentration of surfactant monomers in the premicellar region provides direct evidence of the formation of ion-pairs between cationic solutes and anionic dodecyl sulfate monomers. Three different approaches, based on the variations of either the effective electrophoretic mobility or the retention factor as a function of surfactant concentration in the premicellar and micellar regions, and the linear relationship between the retention factor and the product of a distribution coefficient and the phase ratio, were considered to determine the CMC value of SDS micelles. The suitability of the methods used for the determination of the CMC of SDS with these cationic solutes was discussed. Depending on the structures of cationic solutes and electrophoretic conditions, the CMC value of SDS determined varies in a wide concentration range. The results indicate that, in addition to hydrophobic interaction, both ionic and hydrogen-bonding interactions have pronounced effects on the formation of SDS micelles. Ionic interaction between cationic solutes and SDS surfactant stabilizes the SDS micelles, whereas hydrogen-bonding interactions weakens the solubilization of the attractive ionic interaction. The elevation of the CMC of SDS depends heavily on hydrogen-bonding interactions between cationic solutes and SDS surfactant. Thus, the CMC value of SDS is remarkably elevated with catecholamines, such as epinephrine and norepinephrine, as compared with norephedrine. In addition, the effect of methanol content in the sample solution of these cationic solutes on the CMC of SDS was also examined. 相似文献
16.
The hydrophobic and hydrophilic components of the surface of talc materials in aqueous solution were determined using ionic surfactants and their polar headgroup adsorption isotherms. The hydrophilic and hydrophobic surface areas are inferred from the amount of probe molecule adsorbed and the structure of the adsorbed layer. Natural dispersion of talc shows at 298 K a pH of 9.4 and the electrophoretic measurements indicate that the particles are negatively charged. The hydrophilic surface area is estimated from the adsorption of benzyltrimethylammonium ions (BTMA(+)) through electrostatic interactions as supported by the increase of divalent ions in the bulk phase and the decrease in the exothermic displacement enthalpy. It was also observed from the adsorption isotherm of benzene sulfonate anions that the density of positive surface sites is very low and is thus neglected. The adsorption of an anionic surfactant essentially occurs through dispersive interactions between the nonpolar organic tail of the molecule and the hydrophobic surface. Furthermore, some assumptions on the structure of dodecyl sulfate surfactant aggregates at the interface allow the hydrophobic part of the talc particles to be estimated. The cationic surfactant adsorption has been investigated and found to corroborate the hydrophilic and hydrophobic area values first obtained. Copyright 2001 Academic Press. 相似文献
17.
The effect of cationic or anionic surfactant on the structure of the silver particles produced by galvanic cell reaction is studied. In the absence of any surfactant, both spherical and spindle-like Ag particles are produced, which exhibit binary structures with both micro- and nanoscale characteristics. Addition of cationic surfactant cetyltrimethylammonium bromide (CTAB) in the reaction solution results in the formation of spherical Ag particles with much smaller sizes. While anionic surfactant sodium dodecyl sulfate (SDS) results in the spindle-like Ag particles. Moreover, the rough Ag surfaces can be easily fabricated by direct deposition of the Ag aggregates onto the silicon surface from solution. After further chemisorption of a self-assembled monolayer of n-dodecanethiol, the Ag aggregates exhibit superhydrophobic properties. 相似文献
18.
N. I. Ivanova A. M. Parfenova E. A. Amelina 《Moscow University Chemistry Bulletin》2007,62(3):147-151
The interaction energy between hydrophobic SiO2 particles in aqueous solutions of a cationic surfactant (dodecylpyridinium bromide, DDPB), a nonionic surfactant (Triton X-100, TX-100), and their mixed solutions was measured as a function of concentration. Synergism has been observed in mixed surfactant solutions: the surfactant concentration required for achieving the set interaction energy in the mixed solutions was lower than in the solutions of the individual surfactants. The molecular interaction parameters in surfactant mixtures were calculated using the Rosen model. Chain-chain interactions between nonionic and cationic surfactants were suggested as the main reason for the synergism. 相似文献
19.
The adsorption of anionic surfactants with different hydrophobic chain lengths onto cellulose fibers pretreated with a cationic polyelectrolyte has been investigated. Five steps are involved in the adsorption process, which was ascribed to the formation of monolayer and bilayer surfactant aggregates. Electrostatic interaction between the residual surface charges followed by hydrophobic interaction among the alkyl chains are considered the main factors in the adsorption process. The adsorption of the anionic surfactant was found to greatly enhance the retention of organic compounds onto the polyelectrolyte-treated cellulose. The coadsorption phenomenon, which was dependent on the saturation level of the adsorbed surfactant, has been explained in terms of the accumulation of the organic solute on the hydrophobic core generated by the adsorbed layer. 相似文献
20.
Valery N. Pavlyuchenko Olga V. Sorochinskaya Oleg N. Primachenko Sergey S. Ivanchev 《Macromolecular Symposia》2005,226(1):213-226
The considered method for obtaining hollow polymer particles is based on the following pathway: (1) preparation of a carboxylated core latex by emulsion copolymerization of acrylic monomers with methacrylic acid, (2) synthesis of a core-shell latex comprising a styrene (co)polymer shell, (3) neutralization of the core carboxylic groups with a base followed by the core ionization and hydration to a high degree, shell expansion and formation of water-filled hollows. A number of approaches to improve the hydrophilic core – hydrophobic shell compatibility and enlarge the hollow volume are considered. The synthesized hollow particles are of a submicron size with the relative hollow volume Vhol : Vpart.= 0.43 – 0.64. Methods for cationic hollow particle latex preparation by anionic latex recharging with a cationic surfactant or acidic melamine resin are discussed. Recharging with a melamine resin is shown to afford hollow particles with an external polymer shell providing a high thermal stability of the particles. 相似文献