钙钛矿型LaxSr1－xNi1－yCoyO3光电催化活性研究

用甘氨酸-硝酸盐燃烧合成法, 制备La_xSr_1－xNi_1－yCo_yO₃复合氧化物的陶瓷粉末, 对钙钛矿氧化物进行了XRD结构分析. 在通氧或不通氧下测试氧还原和氧析出的循环伏安曲线. 结果表明: 该氧电极具有双功能催化特性, 但不完全可逆. 利用汞灯作为激发光源, 进行几种水溶性染料和五种混合染料光解实验, 利用紫外-可见、红外以及人工神经网络光度法研究La_xSr_1－xNi_1－yCo_yO₃的催化性能. 结果表明: La_xSr_1－xNi_1－yCo_yO₃ (x＝0.7, 0.9, 1; y＝0.3, 0.75)复合氧化物都具有较强光催化特性; La_xSr_1－xNi_1－yCo_yO₃的光催化活性高于La_xSr_1－xNiO₃, 这与B位离子(Ni^2—, Co^2－)的电子构型有关; Co^2＋的加入可使La_xSr_1－xNiO₃的光催化活性有所提高.     

空气中合成固溶体荧光粉Ba2(Zn, Mg)Si2O7:Ce3+,Eu2+,Eu3+及其发光特性

采用高温固相法在空气中合成了Ba_1.97-yZn_1-xMg_xSi₂O₇:0.03Eu,yCe³⁺系列荧光粉。分别采用X-射线衍射和荧光光谱对所合成荧光粉的物相和发光性质进行了表征。在紫外光330~360 nm激发下,固溶体荧光粉Ba_1.97-yZn_1-xMg_xSi₂O₇:0.03Eu的发射光谱在350~725 nm范围内呈现多谱峰发射,360和500 nm处有强的宽带发射属于Eu²⁺离子的4f⁶5d¹-4f⁷跃迁,590~725 nm红光区窄带谱源于Eu³⁺的⁵D₀-⁷F_J (J=1,2,3,4)跃迁,这表明,在空气气氛中,部分Eu³⁺在Ba_1.97-yZn_1-xMg_xSi₂O₇基质中被还原成了Eu²⁺;当x=0.1时,荧光粉Ba_1.97Zn_0.9Mg_0.1Si₂O₇:0.03Eu的绿色发光最强,表明Eu³⁺被还原成Eu²⁺离子的程度最大。当共掺入Ce³⁺离子后,形成Ba_1.97-yZn_0.9Mg_0.1Si₂O₇:0.03Eu,yCe³⁺荧光粉体系,其发光随着Ce³⁺离子浓度的增大由蓝绿区经白光区到达橙红区;发现名义组成为Ba_1.96Zn_0.9Mg_0.1Si₂O₇:0.01Ce³⁺,0.03Eu的荧光粉的色坐标为(0.323,0.311),接近理想白光,是一种有潜在应用价值的白光荧光粉。讨论了稀土离子在Ba₂Zn_0.9Mg_0.1Si₂O₇基质中的能量传递与发光机理。     

CeCl3-CdCl2-H2O和CeCl3-CdCl2-HCl-H2O的相平衡

测定了三元系CeCl₃-CdCl₂-H₂O (25 ℃)和四元系CeCl₃-CdCl₂-HCl(～8.4％)-H₂O(25 ℃) 的相平衡溶度数据,绘制了相应的溶度图.该三元系是由5个固相区CdCl₂&;#8226;2.5H₂O(原始盐)、CdCl₂&;#8226;H₂O(原始盐)、6CdCl₂&;#8226;CeCl₃&;#8226;14H₂O、4CdCl₂&;#8226;CeCl₃&;#8226;12H₂O、CeCl₃&;#8226;7H₂O(原始盐)组成的复杂体系.该四元系是由5个固相区CdCl₂&;#8226;H₂O(原始盐)、9CdCl₂&;#8226;CeCl₃&;#8226;19H₂O、6CdCl₂&;#8226;CeCl₃&;#8226;14H₂O、4CdCl₂&;#8226;CeCl₃&;#8226;12H₂O、CeCl₃&;#8226;7H₂O(原始盐)组成的复杂体系.其中6CdCl₂&;#8226;CeCl₃&;#8226;14H₂O在该三元系是介稳化合物.9CdCl₂&;#8226;CeCl₃&;#8226;19H₂O 、6CdCl₂&;#8226;CeCl₃&;#8226;14H₂O和4CdCl₂&;#8226;CeCl₃&;#8226;12H₂O用X射线粉末衍射及TG-DTG和DSC等方法进行了研究,并对X射线粉末衍射进行了指标化.     

纳米钙钛矿LaxSr1-xFe1-yCoyO3复合氧化物的制备和表征

用甘氨酸-硝酸盐燃烧合成法，制备La_xSr_1-xFe_1-yCo_yO₃复合氧化物的陶瓷粉末，对该钙钛矿型氧化物进行了XRD、IR、紫外漫反射光谱及循环伏安曲线分析。结果表明：该复合氧化物粉体平均晶粒为15.3～29.8 nm,为立方和正交晶系。该氧电极具有双功能催化特性，但不完全可逆。对水溶液染料进行光解实验，利用紫外-可见、人工神经网络光度法研究La_xSr_1-xFe_1-yCo_yO₃的催化性能。结果表明：CO²⁺的加入可使La_xSr_1-xFeO₃的光催化活性有所提高，B位离子(Fe³⁺，CO²⁺)改变与加入，使La_xSr_1-xFe_1-yCo_yO₃(x=0.7，0.3；y=0.3，0.9，1)光催化活性高于La_xSr_1-xFeO₃。同时，对5种染料进行紫外光解，在0.75 h，脱色率大于91%，并为动力学一级反应。     

层状O2结构锂锰氧化物Li0.60[MgxCoyMn1-x-y]O2的制备及结构表征

本文采用离子交换法分别制备了双复合锂锰氧化物Li_0.60[Mg_xMn_1-x]O₂(0.05 ≤ x ≤ 0.15)和三复合锂锰氧化物Li_0.60[Mg_xCo_yMn_1-x-y]O₂(x=0.05，0.05 ≤      

La-Ce对PbTiO3陶瓷气相扩渗生成La2Ti6O15CeTi21O38的陶瓷材料及其电性能

报道了采用气相法对PbTiO₃陶瓷扩渗La-Ce混合稀土元素的研究. 在气相扩渗过程中, La, Ce与PbTiO₃陶瓷组元发生了复杂反应,生成了稀土化合物La₂Ti₆O₁₅和CeTi₂₁O₃₈, 制备出未见报道的La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃陶瓷材料, 经测试其导电性能发生了十分显著的变化. La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃陶瓷材料的室温电阻率从2.0 ×10¹⁰ W·m下降为0.248 W·m,而且随着温度的变化, 晶粒电阻呈现明显的PTCR效应,而晶界电阻随着温度的升高,呈急剧连续降低状态,总电阻的变化规律与晶界电阻的变化相一致, 试样总电阻的PTCR效应已不存在, 近趋导体. 经XPS测试分析, 进一步证实了La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃陶瓷材料中铅、钛等元素均有变价, 因而导致了La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃陶瓷材料电阻率的降低, 测试结果还首次给出了La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃陶瓷材料中各元素结合能位置的峰值. TG-DTA热分析表明La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃陶瓷材料具有较好的高温热稳定性.     

o-ZrW1.6Mo0.4O8·H2O正交相的合成与表征

The precursor ZrW_1.6Mo_0.4O₇(OH)₂(H₂O)₂ was characterized by IR and XRD methods. δ′-ZrW_1.6Mo_0.4O₈ was prepared by careful controlling the annealing conditions from the precursor and was determined to have the formula as o-ZrW_1.6Mo_0.4O₈·H₂O by TG-DSC, IR, and XRD methods. The relation between o-ZrW_1.6Mo_0.4O₈·H₂O and o-ZrW_1.6Mo_0.4O₈ was discussed through variable temperature XRD patterns. Further more, the mechanism of the precursor dehydration was suggested.     

Bi2WO6量子点(QDs)修饰Bi2MoO6-xF2x异质结的构筑及其催化活性增强机理

采用简单沉积-沉淀法合成了Bi₂WO₆@Bi₂MoO_6-xF_2x（BWO/BMO6-xF2x）异质结,借助XRD、XPS、TEM、SEM、EDS、UV-Vis-DRS、PC和EIS等测试技术对其组成、形貌、光吸收特性和光电化学性能等进行系统表征,并以模型污染物罗丹明B（RhB）的光催化降解作为探针反应来评价Bi₂WO₆@Bi₂MoO_6-xF_2x异质结的光催化活性增强机制。形貌分析表明,所得Bi₂MoO₆微球由大量厚度为20~50 nm的纳米片组成;FE-SEM和HR-TEM分析表明,尺寸约为10 nm的Bi₂WO₆量子点均匀沉积在Bi₂MoO_6-xF_2x微球表面,形成新颖的Bi₂WO₆@Bi₂MoO_6-xF_2x异质结;与纯Bi₂MoO₆或者Bi₂WO₆相比,1∶1Bi₂WO₆@Bi₂MoO_6-xF_2x异质结表现出更好的光催化活性和光电流性质,其对RhB光催化降解的表观速率常数分别为纯BMO和BWO的6.4和11.6倍。PC和EIS图谱分析表明,Bi₂WO₆量子点表面沉积显著提高Bi₂MoO_6-xF_2x光生电子/空穴的分离效率和迁移速率;活性物种捕获实验证明了·O₂^-和h⁺是主要的活性物种。根据实验结果,探讨了F^-掺杂和Bi₂WO₆量子点之间的协同效应对Bi₂MoO₆的光催化活性的影响机制。     

298.15 K Li2B4O7-MgCl2-H2O体系热力学性质的电动势法测定及离子相互作用模型的研究

测定了298.15 K下, 无液接电池Li-ISE│Li₂B₄O₇ (m_A)(aq.), MgCl₂(m_B)(aq.)│AgCl/Ag的电动势, 利用测定结果计算了Li₂B₄O₇-MgCl₂-H₂O体系离子强度在0.05～3 mol•kg^－1范围内, 不同MgCl₂离子强度分数的溶液中LiCl的平均活度系数, 并给出了其随离子强度I, B₄O₇^2－和Mg^2＋浓度的变化规律. 结合以往关于该体系和Li₂B₄O₇-LiCl-H₂O, Li₂B₄O₇-H₂O体系的等压研究结果, 用迭代和多元线性回归方法对Li^＋-Mg^2＋-Cl^－-B₄O₇^2－-H₂O体系的离子相互作用模型进行了研究. 具体方法为考虑了该体系在不同的总硼浓度范围H₃BO₃, B(OH)₄^－, B₃O₃(OH)₄^－和B₄O₅(OH)₄^2－四种含硼化合物的存在以及各硼化合物间的化学平衡, 以修正了的Pitzer渗透系数方程和活度系数方程为基础, 对该体系的等压法和电动势法研究结果进行最小二乘拟合, 拟合的标准偏差为0.0167, 用该模型计算的该体系的渗透系数、活度系数与实验值基本一致.     

由大环配体[As4W40O140]28-与NiII形成的新型超大杂多化合物

在pH = 4.0的水溶液中, NiCl₂·6H₂O, NH₄Cl与Na₂₇[NaAs₄W₄₀O₁₄₀]·60H₂O反应, 得到了新的杂多砷钨酸盐(NH₄)₂₀[Na₂(H₂O)₂Ni(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀]·61H₂O单晶, 用X射线单晶衍射法及元素分析确定了其结构, 晶体属三斜晶系, P¹空间群; 其晶胞参数为: a = 1.33135(18), b = 1.9722(3), c = 3.6430(5) nm, α = 78.010(2)°, β = 82.145(2)°, γ = 74.385(2)°, V = 8.978(2) nm3, Z = 2, R1 = 0.0512, wR2 = 0.0684 (I > 2σ). 在聚阴离子[Na₂(H₂O)₂Ni(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀]^20-中, 2个Ni²⁺和2个Na⁺分占大环配体[As₄W₄₀O₁₄₀]^28-内的4个S2空位, 每个S2位提供4个O_d向金属离子配位, 2个Ni²⁺的配位数为6, 两个Na⁺的配位数分别为5和6, 另一个Ni²⁺处于环外, 与[As₄W₄₀O₁₄₀]^28-的一个端基氧(O_d)桥连成键, 其配位数为6.     

Effect of the Pretreatment of Lipase with Organic Solvents on its Conformation and Activity in Reverse Micelles

The activity and conformation of Chromobacterium viscosum lipase-pretreated with various organic solvents were investigated. The pretreatment of lipase led to a substantial increase of enzyme activity in AOT (sodium bis [2-ethyl -1-hexyl] sulfosuccinate)/isooctane/water reverse micelles. Among the organic solvents used, n-hexane was found to be most effective. It was observed that higher hexane content with shorter agitation time and vice versa had almost the same effect on the initial activity of lipase. The kinetic study showed that the Michaelis constant (K _m) and the substrate adsorption equilibrium constant (K _ad) were reduced by the pretreatment of lipase with hexane, whereas the change in the maximum reaction rate (V _max) was insignificant. The two spectroscopic techniques (Fluorescence spectra of lipase encapsulated in RMs and Fourier transform infrared [FTIR] spectra of lipase powders) were performed to detect possible conformational changes in the enzyme caused by the pretreatment. A correlation between the maximum fluorescence intensity and the activity of treated lipase was found as a function of agitation time. The FTIR spectrum of lipase showed a new shape peak corresponding to 1,500 cm⁻¹ as a result of pretreatment with organic solvents.     

CHARACTERIZATION OF SKELETAL MUSCLE ACTIN LABELED WITH THE TRIPLET PROBE ERYTHROSIN-5-IODOACETAMIDE

Abstract We have labeled rabbit skeletal muscle actin with the triplet probe erythrosin-5-iodoacetamide and characterized the labeled protein. Labeling decreased the critical concentration and lowered the intrinsic viscosity of F-actin filaments; labeled filaments were motile in an in vitro motility assay but were less effective than unlabeled F-actin in activating myosin S1 ATPase activity. In unpolymerized globular actin (G-actin), both the prompt and delayed luminescence were red-shifted from the spectra of the free dye in solution and the fluorescence anisotropy of the label was high (0.356); filament formation red shifted all excitation and emission spectra and increased the fluorescence anisotropy to 0.370. The erythrosin phosphorescence decay was at least biexponential in G-actin with an average lifetime of 99 μs while in F-actin the decay was approximately monoexponential with a lifetime of 278 μs. These results suggest that the erythrosin dye was bound at the interface between two actin monomers along the two-start helix. The steady-state phosphorescence anisotropy of F-actin was 0.087 at 20°C and the anisotropy increased to ≈0.16 in immobilized filaments. The phosphorescence anisotropy was also sensitive to binding the physiological ligands phalloidin, cytochalasin B and tropomyosin. This study lays a firm foundation for the use of this triplet probe to study the large-scale molecular dynamics of F-actin.     

USE OF SENSITIZED FLUORESCENCE FOR THE STUDY OF THE EXCHANGE OF SUBUNITS IN PROTEIN AGGREGATES*

The exchange of subunits between oligomer protein particles depends upon a cycle of dissociations and associations. To examine the dynamics of these cycles we have employed two methods based on the transfer of excitation energy between fluorochromes attached to different subunits of protein oligomers, at various temperatures and pressures. In the heterotransfer method, identical solutions independently labeled with two different fluorophores, donor D and acceptor A, are mixed. The fluorescence spectrum permits the determination of the subunit exchange by the increase in A and decrease in D fluorescence as mixed AD oligomers are formed. In the homotransfer method the aggregates are labeled with fluorescein to the extent that, ideally, each subunit carries a fluorophore. The emission is strongly depolarized because sufficiently often it takes place after a transfer to a fluorophore oriented differently from the one originally excited. Both dissociation and subunit exchange with unlabeled material result in an increase in polarization and can be independently determined by the homotransfer method. Both homo- and heterotransfer have been employed in the study of the effect of temperature on the stability of the aggregates and the relation between the rate of dissociation and the rate of exchange when dissociation of oligomers is induced by hydrostatic pressure.     

Method of labeling antibodies with europium(III)-4,7-bis(chlorosulfophenyl)-1,10-phenanthroline-2,9-di-carboxylic acid chelate.

On the basis of Eu(III)-4,7-bis(chlorosulfophenyl)-1,10-phenanthroline-2,9-di-carboxylic acid chelate (BCPDA) that was synthesized and characterized for time-resolved fluoroimmunoassay (TRFIA), Donkey anti-hepatitis B surface (anti-HBs) was labeled with BCPDA-Eu3+. Coomassie Brilliant Blue was used to determine the protein concentration and radio immunoassay (RIA) for detecting the biological activity in the labeled protein. Optimal conditions for the protein labeling were obtained by monitoring the reaction. Results suggested that the protein could be labeled with BCPDA under relatively moderate conditions. As a practical application, a protein-BCPDA-Eu3+ chelate was obtained by using BCPDA-protein that reacted with EuCl3 under certain conditions. Some properties of BCPDA and protein-BCPDA-Eu3+, such as absorption spectrum, emission spectrum and fluorescence lifetime, were discussed. The detection limit and the linear working range of the established method were also investigated.     

New FRET primers for quantitative real-time PCR

FRET primer real-time PCR chemistry depends on internally labeled primers with FRET dyes linked to their 3′ end. The best distance between the FRET dyes for obtaining the largest signal and the lowest background is six nucleotides. In this study the forward primer was labeled with FAM and the reverse primer with Texas red; the labeled primers meet in cycle two of PCR. At the end of the elongation step FAM is excited to emit fluorescence which will excite Texas red to emit new fluorescence that correlates directly with the quantity of PCR product accumulated. FRET primer techniques amplify short amplicons with unique thermal cycling steps, 0 s at 85 °C for denaturation, 7 s for annealing, and 2 s for elongation. The FRET primer technique was very efficient (92.6, 97.2, and 100%), correlation coefficients were high (1.0, 0.999, and 0.999), and total run time was very short (20, 45, and 40 min per 40 cycles with LightCycler, iCycler, and RotorGene 3000, respectively). When FRET-labeled primers were compared with similar but unlabeled primers it was observed that the FRET primer technique had a lower Ct value and was more efficient than use of unlabeled primers detected by use of SYBR Green I. Figure Schematic diagram of FRET prime real-time PCR Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Molecular fundamentals of enzyme nanogels

The assembly of a monomer around an enzyme as the essential step in the fabrication of enzyme nanogel by in situ polymerization was illustrated by molecular dynamics simulation and evidenced by a fluorescence resonance energy transfer spectrum, using lipase/acrylamide as a model system. The subsequent polymerization generated a hydrophilic gel network which not only strengthened the protein structural integrity via multipoint linkage but also increased the number of intramolecular H-bonds of the encapsulated protein, as suggested by the blue shift of the fluorescence spectrum of the encapsulated lipase. This greatly enhanced the stability of lipase at high temperature, as experimentally demonstrated. The exclusion of polar solvent molecules from the encapsulated enzyme, in contrast to the enrichment of water molecules, due to the presence of a hydrophilic gel network was displayed. This established a hydrophilic microenvironment for the encapsulated protein and thus gave the encapsulated protein an enhanced tolerance to the organic solvent, as experimentally observed in the present study and reported elsewhere. These results have given a molecular insight into the enzyme nanogel as well as its high potential as a robust enzyme model for an expended application spectrum of enzymatic catalysis.     

乙烯对脂肪酶活力的直接作用及机理初探

研究了乙烯对脂肪酶活力的直接作用及其机理. 结果表明: 低浓度乙烯能使脂肪酶催化三油酸甘油酯的水解活力提高; 当乙烯浓度为0.9834 mmol•L^－1时, 酶活力提高13.0%. 高浓度乙烯降低脂肪酶活力; 当乙烯浓度为7.9669 mmol•L^－1时, 酶活力下降24.5%. 加入乙烯的酶最适温度向高温偏移10～15 ℃, 而酶的最适pH值不变. 在pH＝7.9时, 乙烯使酶活力升高较大, pH为4.5～7.5, 8.5, 9.5～11时酶的活力降低. 加入乙烯的酶与对照相比, 其紫外吸收和荧光发射强度均有较大幅度增加, 荧光偏振度、比旋光度和粘度显著下降. DSC分析表明: 在低温范围内酶的可逆吸热峰值温度明显高于对照, 而热焓变低于对照; 在高温范围内酶的不可逆吸热峰值温度和热焓变都低于对照. 这些结果证实了乙烯可以直接影响酶的微环境和构象. 乙烯对脂肪酶的直接作用机制可能是通过改变酶的微环境以及渗入到酶分子内部改变酶构象而引起酶活力的改变.     

Time-Resolved Fluorescence Receptor Assay for Benzodiazepines

Abstract

A novel non-isotopic receptor binding technique for the detection of benzodiazepines is described. A benzodiazepine labeled with europium chelate was prepared and employed as a labeled ligand, and time-resolved measurements of the long lifetime fluorescence of europium chelate allowed avoidance of interference due to proteins in the receptor preparation. Experimental results demonstrate a sigmoid inhibition curve, with binding of the labeled ligand inhibited by comparable concentrations of the unlabeled drug. The proposed assay may provide a simple procedure for the measurement of benzodiazepines in biological systems and a useful tool in the screening of natural substances for new classes of benzodiazepine-like compounds.     

Measurements of coeluting unlabeled and C-labeled polychlorinated biphenyl congeners with partially overlapping fragment profiles using a tandem mass spectrometry

¹³C-labeled compounds are often employed as surrogate or internal standards to monitor the performance of extraction and instrumental analysis procedures for their unlabeled counterparts. However, labeled and unlabeled counterparts most often coelute chromatographically with overlapping mass ion fragments, posing a challenge to the accurate quantification of these compounds. In the present study, an analytical scheme, using coeluting unlabeled and ¹³C-labeled polychlorinated biphenyl (PCB) congeners as the model compounds, was developed with a low-resolution tandem mass spectrometer (MS/MS) to determine the appropriate ranges of PCB congener concentrations that satisfy the no-interference condition. Interferences from unlabeled PCBs to quantitation of labeled counterparts could be minimized when ¹³C-labeled PCB congeners were quantified in the MS/MS mode within a certain concentration range. In addition, good agreements between the measured and theoretically predicted quantitation errors were observed for all labeled PCB congeners except PCB 180. The exception with labeled PCB 180 was mainly attributed to the occurrence of instrumental analytical uncertainty, as analytical error was also observed with absence of unlabeled PCB 180. These results indicate that MS/MS techniques can serve as a useful tool to minimize interferences with quantitation of isotopically labeled compounds from their unlabeled counterparts, which possess partially overlapping ion fragment profiles.     

Spectral imaging of single molecules by transmission grating-based epi-fluorescence microscopy

A spectral imaging method of single protein molecules labeled with a single fluorophore is presented. The method is based on a transmission grating and a routine fluorescence microscope. The bovine serum alubmin (BSA) and antiBSA molecules labeled with Alexa Fluor 488 and Alexa Fluor 594, respectively, are used as the model proteins. The fluorescence of single molecules is dispersed into zeroth-order spectrum and first-order spectrum by the transmission grating. Results show that the fluorescence emission spectrum of single molecule converted from the first-order spectral imaging is in good agreement with the bulk fluorescence spectrum. The spectral resolution of 2.4 nm/pixel is obtained, which is sufficient for identifying the molecular species in a multicomponent system.