Qualitative and quantitative study of nitrogen-containing compounds in heavy gas oil using comprehensive two-dimensional gas chromatography with nitrogen phosphorus detection

In this work, a GCxGC-nitrogen-phosphorus detection (NPD) methodology was developed to separate and quantitate nitrogen-containing compounds in Brazilian heavy gas oil. First, the NPD performance was improved in order to achieve best GCxGC performance. The geometry of this detector was also evaluated. The use of an extended jet improved significantly the peak shape. The GCxGC separation was studied using both first and second dimension columns with different internal diameters. The use of a thicker film in both dimensions provided better performance. LODs of 0.16-8.49 pg of individual compounds were achieved. Two different extraction techniques of the neutral and basic nitrogen-containing compounds were also evaluated. The method using ion-exchange resins to separate neutral and basic nitrogen-containing compounds was more efficient than the method using modified silica. As an example, the amounts (microg/g) of each class reported were: indole (2.77), alkyl carbazoles ranging from C(0) to C(6+) (1.467), alkyl benzocarbazoles from C(0) to C(4+) (793), alkyl quinolines (31.2) and alkyl benzoquinolines (21.6) were quantitated.     

Simultaneous detection of sulfoxaflor and its metabolites,X11719474 and X11721061, in lettuce using a modified QuEChERS extraction method and liquid chromatography–tandem mass spectrometry

An analytical method has been developed to quantify the residual levels of sulfoxaflor and its metabolites (X11719474 and X11721061) in/on cultivated lettuce grown under greenhouse conditions. Samples were extracted and purified using a quick, easy, cheap, effective, rugged, and safe ‘QuEChERS’ method (original version) following systematic method optimization and were analyzed by liquid chromatography–tandem mass spectrometry (LC–MS/MS). Good linearity with coefficient of determination ≥0.9930 was obtained and the limits of detection (LOD) and quantification (LOQ) were in the ranges of 0.003–0.006 and 0.01–0.02 mg/kg, respectively. The recovery rates of both the parent compound and its metabolites (fortified at 10 and 50× the LOQ) estimated from six replicates ranged between 81.9 and 115.5% with a relative standard deviation <12%. The validated method was applied to field‐incurred samples (collected over 7 days) sprayed once or twice with a water‐dispersible granule formulation. Notably, a substantial reduction in rate was observed after 3 days and the half‐life was short, only 1.5 days. The developed method is simple and versatile and can be used for various leafy vegetables.     

Separation of histamine and its metabolites using glass capillary gas chromatography and a nitrogen detector

Complete separation of the TMS derivatives of histamine, 1-methyl histamine and 3-methyl histamine was achieved in two minutes in a 7 m × 0.25 mm column coated with SP 2250. Using NPD, histamine was detectable at levels as low as 20 pg. This offers a rapid, sensitive procedure with potential for clinical diagnosis and food analysis.     

Analysis of imidacloprid and pyrimethanil in shallot (Allium ascalonicum) grown under greenhouse conditions using tandem mass spectrometry: establishment of pre‐harvest residue limits

In this study, the original Quick, Easy, Cheap, Effective, Rugged and Safe method was used for the extraction of imidacloprid and pyrimethanil followed by a rapid clean‐up through dispersive solid‐phase extraction technique with primary secondary amine sorbent and magnesium sulfate in shallot. Residues were analyzed using LC‐tandem mass spectrometry in positive‐ion electrospray ionization mode. The limits of detection and quantification were estimated to be 0.006 and 0.02 mg/kg, respectively. The samples were fortified at two different concentration levels (0.2 and 1.0 mg/kg), and the recoveries ranged between 79.7 and 83.9% with relative standard deviation values < 6%. The method was successfully applied for the establishment of the pre‐harvest residue limits (PHRL). The rate of disappearance of imidacloprid and pyrimethanil on shallot was described with first‐order kinetics (imidacloprid, y² = 0.9670; pyrimethanil, y² = 0.9841), with half‐lives of 2.87 and 2.08 days, respectively. Based on the dissipation patterns of the pesticide residues, the PHRL was recommended at 7.86 mg/kg for 14 days (PHRL₁₄) and 1.98 mg/kg for 7 days (PHRL₇) before harvest for imidacloprid, and 21.64 mg/kg for 7 days (PHRL₇) and 9.28 mg/kg for 4 days (PHRL₄) before harvest for pyrimethanil in shallot. Copyright © 2012 John Wiley & Sons, Ltd.     

Residual dynamic and risk assessment of dimethomorph in Swiss chard grown at two different sites

Residue analysis of dimethomorph in Swiss chard cultivated at two different locations under greenhouse conditions was conducted using high‐performance liquid chromatography–ultraviolet detection and confirmed by tandem mass spectrometry. The randomly collected samples (over 14 days) were extracted with acetonitrile and purified using a Florisil solid‐phase extraction cartridge. Linearity over a concentration range of 0.05–50.0 mg/L had an excellent coefficient of determination of 0.9996. Recovery rate ranged from 82.98 to 95.43% with relative standard deviations ≤5.12% and limits of detection and quantification of 0.003 and 0.01 mg/kg, respectively. The initial deposits [day 0 (2 h post‐application)] were considerably lower (7.57 and 8.55 mg/kg for sites 1 and 2, respectively) than the maximum residue limit (30 mg/kg) set by the Korean Ministry of Food and Drug Safety. The dissipation half‐life was approximately the same, being 5.0 and 5.1 days for sites 1 and 2, respectively. Risk assessment estimated as acceptable daily intake revealed a value of 0.084 or 0.094% (day 0) and 0.014% (10 days post‐application), for sites 1 and 2, respectively. The values indicated that dimethomorph can be safely used on Swiss chard, with no hazardous effects expected for Korean consumers.     

Determination of curcumol in rat plasma by capillary gas chromatography with a hydrogen flame ionization detector

A simple and sensitive capillary gas chromatography with a hydrogen flame ionization detector (GC‐FID) method was developed for the determination of curcumol in rat plasma. From a variety of compounds and solvents tested, buagafuran was selected as the internal standard (IS) and acetonitrile was found to be the best protein precipitation agent and solvent for extracting curcumol from plasma and tissues samples. (Buagafuran was used as an internal standard. Curcumol was extracted by a protein precipitation with acetonitrile.) The samples were determined by GC on an HP‐5 column (30.0 m × 0.32 mm, 0.25 μm); inlet volume 2 μL; split ratio 10 : 1; inlet temperature 250°C; oven temperature 180°C; flow 1.0 mL/·min; FID 250°C; carrier gas N₂. The resulting retention times of curcumol and IS were 6.0 and 9.5 min. There was good linearity over the range 0.133–133.3 μg/mL (r = 0.9999) in plasma samples. The method recoveries were 97.7–102.0% in plasma, and the intra‐ and inter‐day variances (RSD) were less than 15% in all cases. The GC method was applied to develop a pharmacokinetics study in which experimental rats received a single administration of curcumol by intravenous injection. Copyright © 2009 John Wiley & Sons, Ltd.     

Organotin speciation analyses in marine biota using sodium tetraethylborate ethylation and gas chromatography with flame photometric detection

The analysis of organotin compounds based on the in situ simultaneous derivatization and extraction with sodium tetraethylborate has been optimized to overcome the most common matrix effect problems with biological samples. To obtain a complete dissolution of the samples, free of colloidal interfaces problems, mechanical agitation has been coupled with stirring in a warmed ultrasonic bath. A strict quality control system using three internal standards was implemented. Tripropyltin chloride was used as internal standard to assess the derivatization reaction and tetraoctyltin was used to check the overall extraction efficiency. Tetrabutyltin was used to verify the gas chromatography (with flame photometric detector) performance of the analyses. The technique was validated using Certified Reference Materials (NIES‐11 and BCR‐477) and has been applied successfully to different biological matrices (fish, mussels, oyster and barnacles). Copyright © 2002 John Wiley & Sons, Ltd.     

Rapid determination of pesticide residues in herbs using selective pressurized liquid extraction and fast gas chromatography coupled with mass spectrometry

A selective pressurized liquid extraction and gas chromatography coupled with triple quadrupole mass spectrometer method was developed for simultaneous determination of 52 pesticide residues in medicine and food dual-purpose herbs. The developed extraction method integrated extraction and cleanup processes for sample preparation. The sorbents, 5 g Florisil and 100 mg graphitized carbon black, were placed inside the extraction cell to remove matrix interferences. Optimized conditions of selective pressurized liquid extraction were ethyl acetate as extraction solvent, 120°C of extraction temperature, 6 min of static extraction time, 50% of flush volume extracted for two cycles. An ultra inert capillary GC-MS HP-5 UI column (20 m × 0.18 mm id, 0.18 μm) and column backflush system were used for the analysis. Multiple-reaction monitoring was employed for the quantitative analysis with electron ionization mode. All calibration curves showed good linearity (r(2) > 0.995) within the test ranges. The average recoveries of most pesticides were from 81 to 118%. The validated method was successfully applied for the determination of pesticide residues in four herbs. The results indicate that selective pressurized liquid extraction and GC-MS/MS is a sensitive and reliable analytical method for the simultaneous determination of multiple pesticide residues in herbs.     

Rapid simultaneous determination of multiple pesticide residues in traditional Chinese medicines using programmed temperature vaporizer injection-fast gas chromatography coupled with mass spectrometry

A fast gas chromatography coupled with mass spectrometry (GC-MS) using large volume injection with programmed temperature vaporizer in solvent vent mode (PTV-LVI-SV) was developed for the trace determination of multiple pesticide residues in traditional Chinese medicines (TCMs). Experimental conditions of PTV-LVI-SV injection were optimized by central composite design. The optimized result was that initial temperature was held at 40°C for 39 s, vent flow rate was set at 45 mL/min and vent pressure was held at 0 psi for 36 s, injection volume was 10 μL. Furthermore, the quick and effective QuEChERS (quick, easy, cheap, effective, rugged and safe) method was performed to extract and purify pesticide residues in TCMs. The prepared samples were analyzed with GC-MS in the selected ion monitoring mode (SIM). The lowest LOD was 4 μg/kg for some pesticides. The recoveries were checked by spiking samples with pesticides at 25, 50 and 250 μg/kg. The average recoveries of most pesticides were from 80 to 118%. The result indicated that QuEChERS and PTV-LVI-SV GC-MS method was a rapid and sensitive analysis technique for the determination of multiple pesticide residues in TCMs.     

Method for the analysis of thyreostats in meat tissue using gas chromatography with nitrogen phosphorus detection and tandem mass spectrometric confirmation

An analytical method not requiring a mercury column cleanup step is described for the isolation and detection of four thyreostatic agents in meat tissue. The use of these growth promotants in livestock has been banned by regulatory agencies. The meat tissue is homogenized with acetonitrile-water, centrifuged, and the supernatant is partitioned with petroleum ether. The acetonitrile-water is concentrated and then passed through a silica-gel column. The solvent is then removed and the residue derivatized with N-methyl-N-(trimethylsilyl)-trifluoroacetamide. The total amount of organic solvent used for the analysis is merely 35 mL. The derivatized thyreostats are detected and quantitated by gas chromatography (GC) equipped with a nitrogen-phosphorus detector. Percent recoveries from fortified meat tissue (n = 6) at the 0.1-microg/g (parts per million) level are 93.5 +/- 2.9 for 2-thiouracil, 90.3 +/- 3.0 for tapazole, 87.5 +/- 2.9 for 6-methyl-2-thiouracil, and 85.1 +/- 5.8 for 6-n-propyl-2-thiouracil. For the confirmation of analyte identities, GC-tandem mass spectrometry with an ion-trap instrument is used. The estimated minimum level for a reliable measurement is 0.050 microg/g in meat tissue.     

Determination of phthalate esters in cow milk samples using dispersive liquid-liquid microextraction coupled with gas chromatography followed by flame ionization and mass spectrometric detection

A simple and economic method for the analysis of phthalate esters, dimethyl phthalate, diethyl phthalate, di-iso-butyl phthalate, di-n-butyl phthalate, and di-2-ethylhexyl phthalate in cow milk samples by means of gas chromatography-flame ionization detection and gas chromatography-mass spectrometry has been developed. In this work, NaCl and ACN were added to 5 mL of the milk sample as the salting out agent and extraction solvent, respectively. After manual shaking, the mixture was centrifuged. In the presence of NaCl, a two-phase system was formed: upper phase - acetonitrile containing phthalate esters -and lower phase - aqueous phase containing soluble compounds and the precipitated proteins. After the extraction of phthalate esters from milk, a portion of supernatant phase (acetonitrile) was removed, mixed with 1,2-dibromoethane at microliter level and injected by syringe into NaCl solution. After the extraction of the selected phthalate esters into 1,2-dibromoethane, phase separation was performed by centrifugation and the enriched analytes in the sedimented phase were determined by gas chromatography-flame ionization detection and gas chromatography-mass spectrometry. Under the optimum extraction conditions, low limits of detection and quantification between 1.5-3 and 2.5-11 ng/mL, respectively was observed. Enrichment factors were in the range of 397-499. The relative standard deviations for the extraction of 100 ng/mL of each phthalate ester were in the range of 3-4% (n = 6). Finally, some milk samples were successfully analyzed using the proposed method and two analytes, di-n-butyl phthalate and di-2-ethylhyxel phthalate, were determined in them in nanogram per milliliter level.     

Residue level and dissipation pattern of lepimectin in shallots using high‐performance liquid chromatography coupled with photodiode array detection

Lepimectin, as an emulsifiable concentrate, was sprayed on shallots at the recommended dose rate (10 mL/20 L) to determine its residue levels, dissipation pattern, pre‐harvest residue limits (PHRLs), and health risk. Samples were randomly collected over 10 days, extracted with acetonitrile, purified using an amino solid‐phase extraction (NH₂‐SPE) cartridge and analyzed using a high‐performance liquid chromatography–photodiode array detection method. Field‐incurred samples were confirmed using ultra‐performance liquid chromatography–tandem mass spectrometry. The linearity was excellent, with a determination coefficient (R²) of ≥0.9991. The recoveries at two spiking levels (0.2 and 1.0 mg/kg) ranged from 84.49 to 87.64% with relative standard deviations of ≤7.04%. The developed method was applied to field samples grown in separate greenhouses, one located in Naju and one in Muan, in the Republic of Korea. The dissipation pattern was described by first‐order kinetics with half‐lives of 1.9 (Naju) and 1.7 days (Muan). The PHRL curves indicated that, if the lepimectin residues are <0.18 (Naju) and <0.13 mg/kg (Muan) 5 days before harvest, the residue levels will be lower than the maximum residue limit (0.05 mg/kg) upon harvesting. The risk assessment data indicated that lepimectin is safe for use in the cultivation of shallots, with no risk of detrimental effects to the consumer.     

Speciation of organotin compounds in waters and marine sediments using purge-and-trap capillary gas chromatography with atomic emission detection

A procedure for the simultaneous determination of six organotin compounds, including methyl-, butyl- and phenyltins, in waters and marine sediments is developed. The analytes were leached from the solid samples into an acetic acid:methanol mixture by using an ultrasonic probe. The organotins were derivatized with sodium tetraethylborate (NaBEt₄) in the aqueous phase, stripped by a flow of helium, pre-concentrated in a trap and thermally desorbed. This was followed by capillary gas chromatography with microwave-induced plasma atomic emission spectrometry as the detection system (GC-AED). Each chromatographic run took 22 min, including the purge time. Calibration curves were obtained by plotting peak area versus concentration and the correlation coefficients for linear calibration were at least 0.9991. Detection limits ranged from 11 to 50 ng Sn l⁻¹ for tributyltin and tetramethyltin, respectively. The seawater samples analyzed contained variable concentrations of mono-, di- and tributyl- and monophenyltin, ranging from 0.05 to 0.48 μg Sn l⁻¹, depending on the compound. Some of the sediments analyzed contained concentrations of dibutyl- and tributyltin of between 6.0 and 13.0 ng Sn g⁻¹. Analysis of the certified reference material PACS-2, as well as of spiked water and sediment samples showed the accuracy of the method. The proposed method is selective and reproducible, and is considered suitable for monitoring organotin compounds in water and sediment samples.     

Multi-residue determination of organophosphorus and organochlorine pesticides in environmental samples using solid-phase extraction with cigarette filter followed by gas chromatography-mass spectrometry

A solid‐phase extraction (SPE) method was developed to extract 14 pesticides simultaneously from environment samples using cigarette filter as the sorbent before gas chromatography‐mass spectrometry (GC‐MS) analysis. Parameters influencing the extraction efficiency, such as the sample loading flow rate, eluent and elution volume, were optimized. The optimum sample loading rate was 3 mL/min, and the retained compounds were eluted with 6 mL of eluent at 1 mL/min under vacuum. Good linearity was obtained for all the 14 pesticides (r²>0.99) from 0.1 to 20 μg/L for water and from 2 to 400 μg/kg for soil samples. The detection limits (signal‐to‐noise=3) of the proposed method ranged from 0.01 to 0.20 μg/L for water samples and from 0.42 to 6.95 μg/kg for soil samples. The developed method was successfully applied for determination of the analytes in real environmental samples, and the mean recoveries ranged from 76.4 to 103.7% for water samples and from 79.9 to 105.3% for soil samples with the precisions (relative standard deviation) between 2.0 and 13.6%.     

Simultaneous extraction and determination of antibiotics in soils using a method based on quick,easy, cheap,effective, rugged,and safe extraction and liquid chromatography with tandem mass spectrometry

The increasing use of antibiotics has caused substantial environmental problems, which are a matter of great concern. The aim of this work was to develop a quick, easy, cheap, effective, rugged, and safe method for 20 antibiotic residues in soil. The developed method is based on extraction with acetonitrile and phosphate buffer, clean up with dispersive solid‐phase extraction adsorbent using primary secondary amine, octadecylsilane, followed by liquid chromatography with tandem mass spectrometry determination. We optimized different extraction methods and the ratio of cleanup adsorbents to achieve good recoveries at seven spiking levels that ranged from 61.4 to 118.9% with a relative standard deviation below 20% (n  = 5). The method quantification limit was in the range of 2–5 μg/kg for most analytes. Good linear regression coefficients greater than 0.990 were obtained. This method was applied for the analysis of real agricultural soil samples, confirming the feasibility of the method.     

Simultaneous analysis of indaziflam and its metabolites in pitaya using dispersive solid phase extraction coupled with liquid chromatography coupled with tandem mass spectrometry

A simple and efficient multiresidue method using dispersive solid phase extraction and liquid chromatography coupled with tandem mass spectrometry was developed for the targeted analysis of indaziflam and its five metabolites (indaziflam‐diaminotriazine, indaziflam‐carboxylic acid, indaziflam‐triazine indanone, indaziflam‐hydroxyethyl, and indaziflam‐olefin) in pitaya samples (including roots, plants, flowers, peels, pulp, and whole fruit). The analytes were extracted with acetonitrile, and the extracts were purified using multiwalled carbon nanotubes. The method was validated using pitaya samples spiked at 0.5, 5, and 50 µg/kg, and the average recoveries varied from 61.1 to 103.7% with relative standard deviations lower than 12.7% (n = 5). This method exhibited sufficient linearity within the concentration range of 0.1–100 µg/L. The limits of detection and quantification were in the ranges of 0.001–0.1 and 0.003–0.3 µg/kg, respectively. The method was successfully applied to analyze pitaya samples in Nanning, and no indaziflam or its metabolites were detected in the samples analyzed.     

Determination of desipramine in biological samples using liquid–liquid–liquid microextraction combined with in‐syringe derivatization,gas chromatography,and nitrogen/phosphorus detection

A method was established for the determination of desipramine in biological samples using liquid–liquid–liquid microextraction followed by in‐syringe derivatization and gas chromatography–nitrogen phosphorus detection. The extraction method was based on the use of two immiscible organic solvents. n‐Dodecane was impregnated in the pores of the hollow fiber and methanol was placed inside the lumen of the fiber as the acceptor phase. Acetic anhydride was used as the reagent for the derivatization of the analyte inside the syringe barrel. Parameters that affect the extraction efficiency (composition of donor and acceptor phase, ionic strength, sample temperature, and extraction time) as well as derivatization efficiency (amount of acetic anhydride and reaction time and temperature) were investigated. The limit of detection was 0.02 μg/L with intra and interday RSDs of 2.6 and 7.7%, respectively. The linearity of the method was in the range of 0.2–20 μg/L (r² = 0.9986). The method was successfully applied to determine desipramine in human plasma and urine.     

Simultaneous detection of bacitracin and polymyxin B in livestock products using liquid chromatography with tandem mass spectrometry

With the overarching aim to develop a simple and reliable method for the quantitative analysis of polypeptide antibiotics in various livestock products, the content of bacitracin, and polymyxin B in pork, beef, chicken, milk, and eggs was analyzed using colistin sulfate as an internal standard. The extracted samples were eluted via solid‐phase extraction using 2% formic acid in acetonitrile/methanol (1:1, v/v). The two polypeptides were identified and quantified based on the intensities of mass fragments from the respective triply charged precursor ions (bacitracin: 474.97 amu and polymyxin B: 402 amu) at the defined retention time windows using liquid chromatography with electrospray ionization tandem mass spectrometry in time‐scheduled multiple reaction monitoring mode. The calibration curves showed good linearity over the concentration range 50–2500 ng/mL with determination coefficients ≥ 0.991. The mean recoveries were in the range 80.3–88.8% with relative standard deviations <13% for all samples. The limits of quantitation ranged from 30–250 ng/g. The developed method was applied to market samples, but the target analytes were not detected in any of the samples. The developed method is reliable for the simultaneous detection of bacitracin and polymyxin B in pork, beef, chicken, milk, and eggs.     

Application of single-drop microextraction coupled with gas chromatography for the determination of multiclass pesticides in vegetables with nitrogen phosphorus and electron capture detection

In the present work the single-drop microextraction (SDME) technique coupled with GC-NPD and GC-ECD was evaluated for the determination of multi-class pesticides in vegetables. The donor sample solution preparation was optimized by testing different mixtures of solvents and dilutions with water. The SDME procedure was optimized by controlling drop organic solvent, drop volume, agitation, and exposure time. The optimum sample preparation was achieved with the use of a mixture of acetone/H(2)O (10/90, v/v) in donor sample solution preparation and the consequent SDME using a toluene drop under mild stirring for 25min. The efficiency of the extraction process was studied in fortified tomato and courgette samples and matrix effects were further estimated. The proposed method showed good linearity, limits of detection at the sub-microgkg(-1) level and high precision (RSD <15%) and was applied with success in real vegetable samples showing that SDME can be a promising way for sample preparation in pesticide residue analysis.     

Simultaneous determination of phthalates and adipates in human serum using gas chromatography–mass spectrometry with solid‐phase extraction

A gas chromatography–mass spectrometry assay was developed and validated for the simultaneous determination of phthalates and adipates in human serum. The phthalates and adipates studied were dimethyl phthalate, diethyl phthalate, dibutyl phthalate, benzylbutyl phthalate, di‐2‐ethylhexyl phthalate, di‐n‐octyl phthalate, diethyl adipate, dibutyl adipate, diisobutyl adipate, bis(2‐butoxyethyl) adipate and di‐2‐ethylhexyl adipate, with diisooctyl phthalate as internal standard. The extraction and cleaning up procedure was carried out with solid‐phase extraction cartridges containing dimethyl butylamine groups, which showed extraction efficiencies over 88% for each analyte and the internal standard. The calibration curves obtained were linear with correlation coefficients greater than 0.98. For all analytes, the assay gave CV% values for intra‐day precision from 4.9 to 13.3% and mean accuracy values from 91.4 to 108.4%, while inter‐day precision was 5.2–13.4% and mean accuracy 91.0–110.2%. The limits of detection for the assay of phthalates and adipates were in the range 0.7–4.5 ng/mL. The method is simple, sensitive and accurate, and allows for simultaneous determination of nanogram levels of phthalates and adipates in human serum. It was successfully applied to an investigation on the level of phthalates and adipates in a non‐occupationally exposed population.