On‐plate enzyme and inhibition assay of glucose‐6‐phosphate dehydrogenase using thin‐layer chromatography

We performed on‐plate enzyme and inhibition assays of glucose 6‐phosphate dehydrogenase using thin‐layer chromatography. The assays were accomplished based on different retardation factors of the substrates, enzyme, and products. All the necessary steps were integrated on‐plate in one developing process, including substrate/enzyme mixing, reaction starting, and quenching as well as product separation. In order to quantitatively measure the enzyme reaction, the developed plate was then densitometrically evaluated to determine the peak area of the product. Rapid and high‐throughput assays were achieved by loading different substrate spots and/or enzyme (and inhibition) spots in different tracks on the plate. The on‐plate enzyme assay could be finished in a developing time of only 4 min, with good track‐to‐track and plate‐to‐plate repeatability. Moreover, we determined the K_m values of the enzyme reaction and K_i values of the inhibition (Pb²⁺ Cd²⁺ and Cu²⁺ as inhibitors), as well as the corresponding kinetics using the on‐plate assay. Taken together, our method expanded the application of thin‐layer chromatography in enzyme assays, and it could be potentially used in research fields for rapid and quantitative measurement of enzyme activity and inhibition.     

Rapid on‐line system for preliminary screening of lipase inhibitors from natural products by integrating capillary electrophoresis with immobilized enzyme microreactor

An on‐line system for preliminary screening lipase inhibitors from natural products with an immobilized lipase microreactor coupled to capillary electrophoresis was established. In this research, the lipase was anchored on the amino activated capillary inner wall using glutaraldehyde as a homobifunctional linker through Schiff base reaction. The immobilized lipase activity was evaluated by measuring the peak area of the hydrolyzate of p‐nitrophenyl acetate. In order to maintain the enzymatic activity of immobilized lipase, the acetonitrile content and the pH of the reaction solution were also optimized. Under the optimized reaction conditions, the Michaelis–Menten constant of the immobilized lipase and the half maximal inhibitory concentration for orlistat were studied, which were consistent with previous literature data. Furthermore, the developed method was applied to screen lipase inhibition activity from ten natural products. As a result, we found that six natural products have inhibitory effect on the activity of lipase, among which the inhibitory effect of Rhizoma atractylodis extract has never been reported before.     

Evaluation inhibitory activity of catechins on trypsin by capillary electrophoresis–based immobilized enzyme microreactor with chromogenic substrate

In this study, a capillary electrophoresis‐based online immobilized enzyme microreactor was developed for evaluating the inhibitory activity of green tea catechins and tea polyphenol extracts on trypsin. The immobilized trypsin activity and other kinetic parameters were evaluated by measuring the peak area of the hydrolyzate of chromogenic substrate S‐2765. The results indicated that the activity of the immobilized trypsin remained approximately 90.0% of the initial immobilized enzyme activity after 30 runs. The value of Michaelis–Menten constant (K_m) was (0.47 ± 0.08) mM, and the half‐maximal inhibitory concentration (IC₅₀) and inhibition constant (K_i) of benzamidine were measured as 3.34 and 3.00 mM, respectively. Then, the inhibitory activity of four main catechins (epicatechin, epigallocatechin, epicatechin gallate, and epigallocatechin gallate) and three tea polyphenol extracts (green tea, white tea, and black tea) on trypsin were investigated. The results showed that four catechins and three tea polyphenol extracts had potential trypsin inhibitory activity. In addition, molecular docking results illustrated that epigallocatechin gallate, epicatechin gallate, epicatechin, and epigallocatechin were all located not only in the catalytic cavity, but also in the substrate‐binding pocket of trypsin. These results indicated that the developed method is an effective tool for evaluating inhibitory activity of catechins on trypsin.     

Capillary electrophoresis integrated immobilized enzyme reactor for kinetic and inhibition assays of β‐secretase as the Alzheimer's disease drug target

Capillary electrophoresis integrated immobilized enzyme reactors are becoming an increasingly popular alternative for enzyme kinetic and inhibition assays thanks to their unique set of features including cost effectiveness, repeated use of the enzyme, minuscule sample consumption, rapid analysis time and easy automation. In this work we present the development and application of a capillary electrophoresis integrated immobilized enzyme reactor based on magnetic particles for kinetic and inhibition studies of β‐secretase, a key enzyme in the development of Alzheimer's disease and a promising drug target. We document the optimization of the immobilization procedure, characterization of immobilized β‐secretase, optimization of a mutually compatible incubation protocol and separation method as well as the production of the capillary electrophoresis integrated immobilized enzyme reactor. The applicability of the capillary electrophoresis integrated immobilized enzyme reactor was demonstrated by kinetic assay with an unlabelled substrate and by inhibition assays using three structurally different reference inhibitors. The resulting kinetic and inhibition parameters clearly support the applicability of the herein presented method as well as document the fundamental phenomena which need to be taken in account when comparing the results to other methods.     

Dual‐enzyme,co‐immobilized capillary microreactor combined with substrate recycling for high‐sensitive glutamate determination based on CE

A new method for high‐sensitive determination of glutamate was developed and evaluated based on CE by using dual‐enzyme co‐immobilized capillary microreactor combined with substrate recycling. The capillary microreactor was prepared by covalently co‐immobilizing glutamate dehydrogenase (GDH) and glutamic pyruvic transaminase (GPT) on the inner surface of a capillary and was characterized by SEM, ultraviolet‐visible spectroscopy, and fluorescence spectroscopy. The GDH‐GPT co‐immobilized capillary microreactor showed great stability and reproducibility. The apparent K_m for glutamate with GDH‐GPT coupled reaction was determined to be 0.61±0.06 mM but 2.56±0.24 mM when only GDH was immobilized. Glutamate determination was based on on‐column monitoring UV absorption at 340 nm of the reaction product reduced nicotinamide adenine dinucleotide, of which peak area was directly related to the glutamate concentration. The response of the present co‐immobilized GDH‐GPT assay for glutamate is greatly enhanced over single enzyme system, and a 15.7‐fold improvement in sensitivity was obtained. The detection limit of the proposed method is 0.15 μM glutamate (S/N=3). Selectivity for glutamate is good over most of the 20 amino acids. Finally, this method was successfully applied to determine the glutamate content in rat plasma and serum samples.     

On‐line high‐performance liquid chromatography coupled with biochemical detection method for screening of α‐glucosidase inhibitors in green tea

An on‐line high‐performance liquid chromatography–biochemical detection (HPLC‐BCD) method, in which compounds separated by HPLC were on‐line reacted with enzyme and substrate solutions delivered by flow injection and the enzyme inhibition signal was collected by UV detection, was developed to rapidly screen α‐glucosidase inhibitors from green tea extracts in this study. The chromatographic fingerprints and enzyme inhibition profiles of the different brands of green tea could be simultaneously detected by the on‐line HPLC‐BCD method. Enzyme inhibition profiles were detected by the UV detector at 415 nm based on the reaction of α‐glucosidase and p‐nitrophenyl α‐d ‐glucopyranoside (PNPG). PNPG (1.25 mm ), α‐glucosidase (0.4 U/mL) and the flow rate 0.07 mL/min were applied as optimized parameters to detect α‐glucosidase inhibitors in green tea. Four components in green tea showed α‐glucosidase inhibition action and three of them were identified as HHDP‐galloyl glucose, (−)‐epigallocatechin‐3‐gallate and (−)‐epicatechin‐3‐gallate by HPLC–fourier‐transform mass spectrometry (HPLC‐FTMS). Two brands of green tea derived from Mengding and Enshi mountainous areas might be superior to the other samples in the prevention and treatment of diabetes owing to their stronger activities of enzyme inhibitors. The proposed on‐line HPLC‐BCD method could be used to rapidly identify the potential enzyme inhibitors in complex matrixes.     

Chiral separation of 12 pairs of enantiomers by capillary electrophoresis using heptakis‐(2,3‐diacetyl‐6‐sulfato)‐β‐cyclodextrin as the chiral selector and the elucidation of the chiral recognition mechanism by computational methods

Chiral separation of 12 pairs of basic analyte enantiomers including oxybutynin, bambuterol, tradinterol, clenbuterol, clorprenaline, terbutaline, tulobuterol, citalopram, phencynonate, fexofenadine, salbutamol, and penehyclidine was conducted by capillary electrophoresis using a single‐isomer anionic β‐cyclodextrin derivative, heptakis‐(2,3‐diacetyl‐6‐sulfato)‐β‐cyclodextrin as the chiral selector. Parameters influencing separation were studied, including background electrolyte pH, heptakis‐(2,3‐diacetyl‐6‐sulfato)‐β‐cyclodextrin concentration, buffer concentration, and separation voltage. A background electrolyte consisting of 50 mM Tris‐H₃PO₄ and 6 mM heptakis‐(2,3‐diacetyl‐6‐sulfato)‐β‐cyclodextrin at pH 2.5 was found to be highly efficient for the separation of most enantiomers, with other conditions of normal polarity mode at 10 kV, detection wavelength of 210 nm using hydrodynamic injection for 3 s. Under the optimal conditions, baseline resolution (>1.50) for 11 pairs of enantiomers and somewhat lower resolution for penehyclidine enantiomers (1.17) were generated. Moreover, the possible mechanism of separation of clenbuterol, oxybutynin, salbutamol, and penehyclidine was investigated using a computational modeling method.     

Application of amino‐based chitosan cyclodextrin derivatives for the extraction of catechins in green tea with high‐performance liquid chromatography

Chitosan derivatives have been studied widely, but poor solubility in water restricts their applications. In this study, four types of amine‐based chitosan derivatives were prepared and modified further with beta‐cyclodextrin. The sequential microextraction of catechins ((+)‐catechin and (?)‐epigallocatechin gallate) from green tea powder by an optimized solid‐phase extraction method using these four derivatives was investigated. The optimal conditions for the extraction of catechins were 60°C for a 40 min extraction period. The purity and amount of each catechin were determined by high‐performance liquid chromatography. The different amines strengthened the extraction capacity of chitosan. Among the four types of amines, ethylene diamine grafted chitosan beta‐cyclodextrin had the highest extraction capacity to catechins. Therefore, this material was used in the extraction assay, and the standard curves of (+)‐catechin and (?)‐epigallocatechin gallate were linear over the concentration range, 0.25–500 µg/mL, after assaying five data points in duplicate. Solid‐phase extraction with the amino‐based chitosan beta‐cyclodextrin system is a new application of chitosan, which has potential applications in the extraction of bioactive compounds from plant materials or the removal of different impurities from specific extracts.     

Micro‐intumescent flame retardant polyamide 6 based on cyclic phosphate grafting phenol formaldehyde

In this paper, thermoplastic phenol formaldehyde (PF) grafted cyclic neopentyl phosphate (PFCP) was synthesized by using PF and 2,2‐dimethyl‐1,3‐propanediol phosphoryl chloride. It was characterized by Fourier transform infrared spectroscopy (FTIR), 1H and 31P nuclear magnetic resonance (NMR). Compared to PF, PFCP shows improved thermal and thermoxidative stability and allows itself to be used in polyamide 6 (PA6). A micro‐intumescent flame retardant system was constructed by using cyclic neopentyl phosphate as acid source, PF as charring agent and PA6 whose decomposition products work as blowing agent. The results showed that PA6/PFCP composite is classified the UL‐94 V‐0 rating and get a LOI value of 35.5% at 25% loading of PFCP. SEM results showed that the outside of char residues is continuous and dense, but the inside is micro‐intumescent and porous. XPS analysis of char revealed that most of phosphorus remained in the char layer. All the results suggest that the mode of flame retardant's action for PA6/PFCP composites is shifted from melting away to charring protection with the content of PFCP increasing. The coherent char generated by the decomposition of PFCP contributes most to flame retardancy of PA6. Copyright © 2016 John Wiley & Sons, Ltd.     

Study of solvent effects on the stability constant and ionic mobility of the dibenzo‐18‐crown‐6 complex with potassium ion by affinity capillary electrophoresis

The effect of solvent on the strength of noncovalent interactions and ionic mobility of the dibenzo‐18‐crown‐6 complex with K⁺ in water/organic solvents was investigated by using affinity capillary electrophoresis. The proportion of organic solvent (methanol, ethanol, propan‐2‐ol, and acetonitrile) in the mixtures ranged from 0 to 100 vol.%. The stability constant, K_KL, and actual ionic mobility of the dibenzo‐18‐crown‐6‐K⁺ complex were determined by the nonlinear regression analysis of the dependence of the effective electrophoretic mobility of dibenzo‐18‐crown‐6 on the concentration of K⁺ (added as KCl) in the background electrolyte (25 mM lithium acetate, pH 5.5, in the above mixed hydro–organic solvents). Competitive interaction of the dibenzo‐18‐crown‐6 with Li⁺ was observed and quantified in mixtures containing more than 60 vol.% of the organic solvent. However, the stability constant of the dibenzo‐18‐crown‐6‐Li⁺ complex was in all cases lower than 0.5 % of K_KL. The log K_KL increased approximately linearly in the range 1.62–4.98 with the increasing molar fraction of organic solvent in the above mixed solvents and with similar slopes for all four organic solvents used in this study. The ionic mobilities of the dibenzo‐18‐crown‐6‐K⁺ complex were in the range (6.1–43.4) × 10^?9 m² V^?1 s^?1.     

Capillary electrophoretic separation and computational modeling of inclusion complexes of β‐cyclodextrin and 18‐crown‐6 ether with primaquine and quinocide

The antimalarial drug primaquine (PQ) and its contaminant, the positional isomer quinocide (QC) have been successfully separated using capillary electrophoresis with either β‐cyclodextrin (β‐CD) or 18‐crown‐6 ether (18C6) as chiral mobile phase additive. The interactions of the drugs with cyclodextrins and 18C6 were studied by the semiempirical method (Parametric Model 3) PM3. Theoretical calculations for the inclusion complexes of PQ and QC with α‐CD, β‐CD and 18C6 were performed. Data from the theoretical calculations are correlated and discussed with respect to the electrophoretic migration behavior. More stable complexes are predicted for the PQ–β‐CD and PQ–18C6 complexes. The coelution of PQ and QC when α‐CD was used as buffer additive can be explained by their comparable stabilities of the inclusion complex formed, while significant differences in the complexation stabilities of the drugs with β‐CD is responsible for their separation. The stronger hydrogen bonding in PQ–18C6 system is responsible for the separation between PQ and QC when 18C6 was used as chiral mobile phase additive. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and application of a chiral ionic liquid functionalized β‐cyclodextrin as a chiral selector in capillary electrophoresis

A novel chiral ionic liquid functionalized β‐cyclodextrin, 6‐O‐2‐hydroxpropyltrimethylammonium‐β‐cyclodextrin tetrafluoroborate ([HPTMA‐β‐CD][BF₄]), was synthesized and used as a chiral selector in capillary electrophoresis. [HPTMA‐β‐CD][BF₄] not only increased the solubility in aqueous buffer in comparison with the parent compound, but also provided a stable reversal electroosmotic flow, and the enantioseparation of eight chiral drugs was examined in phosphate buffer containing [HPTMA‐β‐CD][BF₄] as the chiral selector. The effects of the [HPTMA‐β‐CD][BF₄] concentration and the background electrolyte pH were studied. Moreover, the chiral separation abilities of β‐CD and [HPTMA‐β‐CD][BF₄] were compared and possible mechanisms for the chiral recognition of [HPTMA‐β‐CD][BF₄] are discussed. Copyright © 2013 John Wiley & Sons, Ltd.     

Voltage‐programming‐based capillary gel electrophoresis for the fast detection of angiotensin‐converting enzyme insertion/deletion polymorphism with high sensitivity

A voltage‐programming‐based capillary gel electrophoresis method with a laser‐induced fluorescence detector was developed for the fast and highly sensitive detection of DNA molecules related to angiotensin‐converting enzyme insertion/deletion polymorphism, which has been reported to influence predisposition to various diseases such as cardiovascular disease, high blood pressure, myocardial infarction, and Alzheimer's disease. Various voltage programs were investigated for fast detection of specific DNA molecules of angiotensin‐converting enzyme insertion/deletion polymorphism as a function of migration time and separation efficiency to establish the effect of voltage strength to resolution. Finally, the amplified products of the angiotensin‐converting enzyme insertion/deletion polymorphism (190 and 490 bp DNA) were analyzed in 3.2 min without losing resolution under optimum voltage programming conditions, which were at least 75 times faster than conventional slab gel electrophoresis. In addition, the capillary gel electrophoresis method also successfully applied to the analysis of real human blood samples, although no polymorphism genes were detected by slab gel electrophoresis. Consequently, the developed voltage‐programming capillary gel electrophoresis method with laser‐induced fluorescence detection is an effective, rapid analysis technique for highly sensitive detection of disease‐related specific DNA molecules.     

Affinity capillary electrophoresis and density functional theory study of noncovalent interactions of cyclic peptide [Gly6]‐antamanide with small cations

ACE and density functional theory were employed to study the noncovalent interactions of cyclic decapeptide glycine‐6‐antamanide ([Gly⁶]AA), synthetic derivative of native antamanide (AA) peptide from the deadly poisonous fungus Amanita phalloides , with small cations (Li⁺, Rb⁺, Cs⁺, NH₄⁺, and Ca²⁺) in methanol. The strength of these interactions was quantified by the apparent stability constants of the appropriate complexes determined by ACE. The stability constants were calculated using the nonlinear regression analysis of the dependence of the effective electrophoretic mobility of [Gly⁶]AA on the concentration of the above ions in the BGE (methanolic solution of 20 mM chloroacetic acid, 10 mM Tris, pH_MeOH 7.8, containing 0–70 mM concentrations of the above ions added in the form of chlorides). Prior to stability constant calculation, the effective mobilities measured at actual temperature inside the capillary and at variable ionic strength of the BGEs were corrected to the values corresponding to the reference temperature of 25°C and to the constant ionic strength of 10 mM. From the above ions, Rb⁺ and Cs⁺ cations interacted weakly with [Gly⁶]AA but no interactions of [Gly⁶]AA with univalent Li⁺ and NH₄⁺ ions and divalent Ca²⁺ ion were observed. The apparent stability constants of [Gly⁶]AA‐Rb⁺ and [Gly⁶]AA‐Cs⁺ complexes were found to be equal to 13 ± 4 and 22 ± 3 L/mol, respectively. The structural characteristics of these complexes, such as position of the Rb⁺ and Cs⁺ ions in the cavity of the [Gly⁶]AA molecule and the interatomic distances within these complexes, were obtained by the density functional theory calculations.     

Purification of angiotensin‐converting enzyme from human plasma and investigation of the effect of some active ingredients isolated from Nigella sativa L. extract on the enzyme activity

In the present study, one‐step purification of angiotensin‐converting enzyme (ACE, peptidyldipeptidase A, EC 3.4.15.1), responsible for regulation of blood pressure, was achieved using affinity chromatography from human plasma. The enzyme was purified 12,860‐fold with a specific activtiy of 5080 EU/mg protein. Optimum temperature and pH were determined for the enzyme as 35–40°C and pH 7.4–7.5, respectively. The purity of ACE was determined by SDS–PAGE and the enzyme showed two bands at 60 and 70 kDa on the gel. The native molecular weight of ACE was found to be 260 kDa by gel filtration chromatography, demonstrating that the enzyme has a heterodimeric structure. Natural fatty acids of Nigella sativa (Ranunculaceae) were isolated by means of column chromatography. The structures of these compounds were determined using NMR and GC‐MS. The results showed that high concentrations of linoleic, oleic and palmitic acids were isolated from the plant. The effect of six fractions (Fr 1–6) on ACE activity was examined. Fraction 3 increased the ACE activity while the other fractions decreased the enzyme activity. The concentrations of the fractions inhibiting the half‐maximum activity of the enzyme were calculated as 1.597 mg/mL for Fr 1, 0.053 mg/mL for Fr 2, 0.527 mg/mL for Fr 4, 0.044 mg/mL for Fr 5 and 0.136 mg/mL for Fr 6 using a Lineweaver–Burk graph.     

Iron oxide nanoparticles coated with green tea extract as a novel magnetite reductant and stabilizer sorbent for silver ions: Synthetic application of Fe3O4@green tea/Ag nanoparticles as magnetically separable and reusable nanocatalyst for reduction of 4‐nitrophenol

Green tea extract having many phenolic hydroxyl and carbonyl functional groups in its molecular framework can be used in the modification of Fe₃O₄ nanoparticles. Moreover, the feasibility of complexation of polyphenols with silver ions in aqueous solution can improve the surface properties and capacity of the Fe₃O₄@green tea extract nanoparticles (Fe₃O₄@GTE NPs) for sorption and reduction of silver ions. Therefore, the novel Fe₃O₄@GTE NPs nano‐sorbent has potential ability as both reducing and stabilizing agent for immobilization of silver nanoparticles to make a novel magnetic silver nanocatalyst (Fe₃O₄@GTE/Ag NPs). Inductively coupled plasma analysis, transmission and scanning electron microscopies, energy‐dispersive X‐ray and Fourier transform infrared spectroscopies, and vibrating sample magnetometry were used to characterize the catalyst. Fe₃O₄@GTE/Ag NPs shows high catalytic activity as a recyclable nanocatalyst for the reduction of 4‐nitrophenol at room temperature.     

Dispersive micro‐solid‐phase extraction using carbon‐based adsorbents for the sensitive determination of verapamil in plasma samples coupled with capillary electrophoresis

A dispersive micro‐solid‐phase extraction procedure coupled with capillary electrophoresis ultraviolet detection was developed for determination of verapamil in plasma samples. Graphene oxide/polydopamin was synthesized by a one‐step polymerization method, and graphene oxide/Fe₃O₄ (magnetic graphene oxide) nanocomposite was prepared by coprecipitation method. Moreover, they were fully characterized. The use of hazardous and water‐immiscible solvents was scaled down, and only 500 μL of acetone was required as the desorption solvent. The detector response concentration plots were linear in the range of 5–500 ng/mL, and the proposed method was validated according to guidelines. The precision and accuracy were less than 15%. Dispersive micro‐solid‐phase extraction method provides a rapid, environmentally friendly, and sensitive analysis for the verapamil in patient plasma samples, which is adequate for therapeutic drug monitoring and pharmacokinetic studies.     

Construction of L‐Lysine Sensor by Layer‐by‐Layer Adsorption of L‐Lysine 6‐Dehydrogenase and Ferrocene‐Labeled High Molecular Weight Coenzyme Derivative on Gold Electrode

A ferrocene‐labeled high molecular weight coenzyme derivative (PEI‐Fc‐NAD) and a thermostable NAD‐dependent L ‐lysine 6‐dehydrogenase (LysDH) from thermophile Geobacillus stearothermophilus were used to fabricate a reagentless L ‐lysine sensor. Both LysDH and PEI‐Fc‐NAD were immobilized on the surface of a gold electrode by consecutive layer‐by‐layer adsorption (LBL) technique. By the simple LBL method, the reagentless L ‐lysine sensor, with co‐immobilization of the mediator, coenzyme, and enzyme was obtained, which exhibited current response to L ‐lysine without the addition of native coenzyme to the analysis system. The amperometric response of the sensor was dependent on the applied potential, bilayer number of PEI‐Fc‐NAD/LysDH, and substrate concentration. A linear current response, proportional to L ‐lysine concentration in the range of 1–120 mM was observed. The response of the sensor to L ‐lysine was decreased by 30% from the original activity after one month storage.     

Affinity capillary electrophoresis for the assessment of binding affinity of carbohydrate‐based cholera toxin inhibitors

Developing tools for the study of protein carbohydrate interactions is an important goal in glycobiology. Cholera toxin inhibition is an interesting target in this context, as its inhibition may help to fight against cholera. For the study of novel ligands an affinity capillary electrophoresis (ACE) method was optimized and applied. The method uses unlabeled cholera toxin B‐subunit (CTB) and unlabeled carbohydrate ligands based on ganglioside GM1‐oligosaccharides (GM1os). In an optimized method at pH 4, adsorption of the protein to the capillary walls was prevented by a polybrene‐dextran sulfate‐polybrene coating. Different concentrations of the ligands were added to the BGE. CTB binding was observed by a mobility shift that could be used for dissociation constant (K_d) determination. The K_d values of two GM1 derivatives differed by close to an order of magnitude (600 ± 20 nM and 90 ± 50 nM) which was in good agreement with the differences in their reported nanomolar IC₅₀ values of an ELISA‐type assay. Moreover, the selectivity of GM1os towards CTB was demonstrated using Influenza hemagglutinin (H5) as a binding competitor. The developed method can be an important platform for preclinical development of drugs targeting pathogen‐induced secretory diarrhea.     

Development of rapid and simultaneous quantitative method for green tea catechins on the bioanalytical study using UPLC/ESI‐MS

A rapid and quantitative analytical method for the simultaneous determination of green tea catechins using ultra‐performance liquid chromatography/electrospray ionization–mass spectrometry was developed. Total analytical run time was 3.5 min for the detection of (?)‐epicatechin (EC), (?)‐epicatechin‐3‐O‐gallate (ECG), (?)‐epigallocatechin (EGC), (?)‐epigallocatechin‐3‐O‐gallate (EGCG) and myricetin as the internal standard (IS) in rat plasma. The calibration curves were linear over the range of 10–5000 ng/mL for all the catechins. The inter‐ and intra‐day precision (relative standard deviation) and accuracy (percentage deviation) of the method were both lower than 10%. The average extraction recoveries in plasma ranged from 68.5 to 86.5%, and the lower limits of quantification of EC, EGC, ECG and EGCG were 10 ng/mL with a signal‐to‐noise ratio of >10. The assay developed was successfully applied to a pharmacokinetic study of catechins following intravenous and intragastric administrations of green tea extract in rats. Plasma concentrations of four catechins were detected up to 5–24 h after administration, and the pharmacokinetic parameters of catechins were in agreement with previous studies. From these findings, taken together with the high productivity and precision, the developed method could be a reliable and reproducible tool for the evaluation of pharmacokinetic properties of catechins. Copyright © 2012 John Wiley & Sons, Ltd.