A cobalt-doped transparent glass ceramic saturable absorber Q-switch for a LD pumped Yb<Superscript>3+</Superscript>/Er<Superscript>3+</Superscript> glass microchip laser

We fabricate a transparent glass ceramic contains magnesium-aluminum spinel nanocrystallites doped with Co²⁺ ions. The ground-state and excited-state absorption cross section of this glass ceramic at 1.54 μm are estimated to be (2.8 ± 0.3) × 10⁻¹⁹ cm² and (4.8 ± 0.5) × 10⁻²⁰ cm², respectively. For the first time, the passively Q-swithched operation of LD pumped 1.54 μm microchip Yb³⁺/Er³⁺ glass laser is realized with transparent glass ceramic as saturable absorber. The Q-switched pulses of 3.846 kHz in repetition rate, 6.2 ns in duration and 6.3 μJ in energy are obtained. At last, the dependences of pulse width and repetition rate on pump power are also investigated.     

Comparative Investigation on Nanocrystal Structure and Luminescence Properties of Gadolinium Molybdates Codoped with Er<Superscript>3+</Superscript>/Yb<Superscript>3+</Superscript>

This paper reports on the comparative investigation of nanocrystal structure and luminescence properties of Er³⁺/Yb³⁺-codoped gadolinium molybdate nanocrystals Gd₂(MoO₄)₃ and Gd₂MoO₆ synthesized by the Pechini method with citric acid and ethylene glycol. Their crystallization, structure transformation, and morphologies have been investigated by X-ray diffraction, thermogravimetric/differential scanning calorimetry, and transmission electron microscopy. It is noticed that Er³⁺/Yb³⁺-codoped monoclinic Gd₂(MoO₄)₃ nanocrystals have shown an intense upconversion through a sintering of the organic complex precursor at 600°C. Furthermore, it transforms to orthorhombic Gd₂(MoO₄)₃ when the precursor is sintered at 900°C. In counterpart of monoclinic Gd₂MoO₆, however, the monoclinic structure remains unchanged when the precursor is sintered at a temperature ranging from 600°C to 900°C. Intense visible emissions of Er³⁺ attributed to the transitions of ²H_11/2, ⁴S_3/2–⁴I_15/2 at 520 and 550 nm, and ⁴F_9/2–⁴I_15/2 at 650 nm have been observed upon an excitation with a UV source and a 980 nm laser diode, and the involved mechanisms have been explained. It is quite interesting to observe obvious differences both in the excitation and the upconversion emission spectra of Er³⁺/Yb³⁺-codoped Gd₂(MoO₄)₃ respectively with monoclinic and orthorhombic structure. The quadratic dependence of fluorescence on excitation laser power has confirmed that two-photons contribute to upconversion of the green–red emissions.     

Defect Structure and Up-conversion Luminescence Properties of ZrO<Subscript>2</Subscript>:Yb<Superscript>3+</Superscript>,Er<Superscript>3+</Superscript> Nanomaterials

The up-converting ZrO₂:Yb³⁺,Er³⁺ nanomaterials were prepared with the combustion and sol–gel methods. FT-IR spectroscopy was used for analyzing the impurities. The crystal structures were characterized with X-ray powder diffraction and the mean crystallite sizes were estimated with the Scherrer formula. Up-conversion luminescence measurements were made at room temperature with IR-laser excitation at 977 nm. The IR spectra revealed the conventional and OH⁻ impurities for the combustion synthesis products. The structure of the ZrO₂:Yb³⁺, Er³⁺ nanomaterials was cubic except for the minor monoclinic and tetragonal impurities obtained with the sol–gel method. The materials showed red (650–700 nm) and green (520–560 nm) up-conversion luminescence due to the ⁴F_9/2→⁴I_15/2 and (²H_11/2, ⁴S_3/2)→⁴I_15/2 transitions of Er³⁺, respectively. The products obtained with the combustion synthesis exhibited the most intense luminescence intensity and showed considerable afterglow.     

Wavelength tunable femtosecond laser based on short Er<Superscript>3+</Superscript>/Yb<Superscript>3+</Superscript> codoped phosphate fiber

A wavelength tunable laser system mode-locked by nonlinear polarization evolution based on a 3 cm-long homemade Er³⁺/Yb³⁺ codoped phosphate fiber has been reported. By simply adjusting the polarization controllers, the central wavelength of the mode-locked spectrum can be tuned over 1537.1–1563.3 nm continuously. Moreover, 264-fs pulse with 3-dB spectral width of 39.6 nm and peak power of 7.8 kW at a 7.55 MHz repetition rate is generated directly from the all-fiber ring cavity.     

Wavelength tunable linear cavity cladding pump Er<Superscript>3+</Superscript>/Yb<Superscript>3+</Superscript>co-doped fiber laser operating in L-band

We have demonstrated a novel tunable linear cavity Er³⁺/Yb³⁺ co-doped fiber laser, which utilizes amplified spontaneous emission as a secondary pump source so that it can operate in L-band. The tuning wavelength range can be up to 34 nm, from 1588.6 to 1622.6 nm, and the output power excursion of the laser at different wavelengths can be less than 0.4 dB by using a two sections of high-birefringence fiber loop mirror as the wavelength filter. The high output power of 200 mW is realized by using the cladding-pump.     

Photon avalanche upconversion and pump power studies in LaF<Subscript>3</Subscript>:Er<Superscript>3+</Superscript>/Yb<Superscript>3+</Superscript> phosphor

Hexagonal LaF₃:Er³⁺/Yb³⁺ phosphor material has been synthesized by chemical precipitation method to obtain high near-infrared to green upconversion (UC) efficiency. Its thermal, structural and fluorescence properties have been studied. UC emission bands have been observed up to 315 nm in UV region. The effect of input pump power on the intensities of various emission bands has been studied in detail and photon avalanche UC mechanism has been identified. On increasing the excitation power, some bands have shown saturation in intensity. Also, at higher pump intensities two new UC bands were observed and their origin has been discussed. The phosphor has also been tested for possible UC-based fingerprint detection.     

Green,blue, red,near-infrared up-conversion luminescence of Yb<Superscript>3+</Superscript>/Er<Superscript>3+</Superscript>/Tm<Superscript>3+</Superscript> co-doped YVO<Subscript>4</Subscript> nanoparticles

YVO₄:Yb³⁺,Er³⁺; YVO₄:Yb³⁺,Tm³⁺; and YVO₄:Yb³⁺,Er³⁺,Tm³⁺ were all synthesized via sol-gel method with a subsequent thermal treatment. Specifically, YVO₄:Yb³⁺,Er³⁺,Tm³⁺ phosphors were prepared with different annealing temperatures to study the influence of temperature. The transmission electron microscope (TEM), scanning electron microscope (SEM), X-ray diffractometer (XRD), and photoluminescent (PL) spectrofluorometer were used to investigate the morphology, crystal structure, and up-conversion luminescent properties of all samples. In summary, all samples were granular-like nanoparticles and well crystallized with the same tetragonal phase as YVO₄. Under the irradiation at 980 nm, YVO₄:Yb³⁺,Er³⁺ phosphors can generate green emission at 525 and 553 nm and red emission at 657 nm, while YVO₄:Yb³⁺,Tm³⁺ phosphors can generate blue emission at 476 nm, red emission at 648 nm, and near-infrared emission at 800 nm. Notably, YVO₄:Yb³⁺,Er³⁺,Tm³⁺ samples can exhibit green emission, blue emission, red emission, and near-infrared emission at the same time, which might endow the as-prepared samples with potential applications in many fields, such as luminous paint, infrared detection, and biological label.     

Spectroscopic properties in Er³⁺/Yb³⁺ Co-doped fluorophosphate glass

Using the technique of high-temperature melting, a new Er 3+ /Yb 3+ co-doped fluorophosphate glass was prepared. The absorption and fluorescence spectra were investigated in depth. The effect of Er 3+ and Yb 3+ concentration on the spectroscopic properties of the glass sample was also discussed. According to the Judd–Ofelt theory, the oscillator strength was computed. The lifetime of 4 I 13/2 level (τ m ) of Er 3+ ions was 8.23 ms, and the full width at half maximum of the dominating emission peak was 68 nm at 1.53 μm. The large stimulated emission cross section of the Er 3+ was calculated by the McCumber theory. The spectroscopic properties of Er 3+ ion were compared with those in different glasses. The full width at half maximum and σ e are larger than those of other glass hosts, indicating this studied glass may be a potentially useful candidate for high-gain erbium-doped fiber amplifier.     

Spectroscopic properties of fluorophosphate glass with high Er<Superscript>3+</Superscript> concentration

Fluorophosphate glass with 4 mol. % ErF₃ content was prepared. The different scanning calorimetry was conducted. Raman spectrum, infrared transmission spectrum, absorption spectrum were measured. Fluorescence spectrum and lifetime of emission around 1.53 μm were measured under 970 nm laser diode excitation. The metaphosphate content in the composition is limited, but the maximum phonon energy of glass amounts to 1290 cm^-1, and is comparatively high. The full width at half maximum is about 56 nm, and is wider than for most of the materials investigated. The measured lifetime of ⁴ I _13/2→⁴ I _15/2 transition, contributed by the high phonon energy, inefficient interaction of Er³⁺ ions, and low water content, amounts to no less than 7.36 ms though the Er³⁺ concentration is high. This work might provide useful information for the development of compact optical devices. PACS 78.20.-e; 42.70.Ce; 42.70.Hj; 32.70.Cs     

The upconversion luminescence and magnetism in Yb<Superscript>3+</Superscript>/Ho<Superscript>3+</Superscript> co-doped LaF<Subscript>3</Subscript> nanocrystals for potential bimodal imaging

Biocompatible upconversion nanoparticles with multifunctional properties can serve as potential nanoprobes for multimodal imaging. Herein, we report an upconversion nanocrystal based on lanthanum fluoride which is developed to address the imaging modalities, upconversion luminescence imaging and magnetic resonance imaging (MRI). Lanthanide ions (Yb³⁺ and Ho³⁺) doped LaF₃ nanocrystals (LaF₃ Yb³⁺/Ho³⁺) are fabricated through a rapid microwave-assisted synthesis. The hexagonal phase LaF₃ nanocrystals exhibit nearly spherical morphology with average diameter of 9.8 nm. The inductively coupled plasma mass spectrometry (ICP-MS) analysis estimated the doping concentration of Yb³⁺ and Ho³⁺ as 3.99 and 0.41%, respectively. The nanocrystals show upconversion luminescence when irradiated with near-infrared (NIR) photons of wavelength 980 nm. The emission spectrum consists of bands centred at 542, 645 and 658 nm. The stronger green emission at 542 nm and the weak red emissions at 645 and 658 nm are assigned to ⁵S₂ → ⁵I₈ and ⁵F₅ → ⁵I₈ transitions of Ho³⁺, respectively. The pump power dependence of luminescence intensity confirmed the two-photon upconversion process. The nanocrystals exhibit paramagnetism due to the presence of lanthanide ion dopant Ho³⁺ and the magnetization is 19.81 emu/g at room temperature. The nanocrystals exhibit a longitudinal relaxivity (r ₁) of 0.12 s^?1 mM^?1 and transverse relaxivity (r ₂) of 28.18 s^?1 mM^?1, which makes the system suitable for developing T2 MRI contrast agents based on holmium. The LaF₃ Yb³⁺/Ho³⁺ nanocrystals are surface modified by PEGylation to improve biocompatibility and enhance further functionalisation. The PEGylated nanocrystals are found to be non-toxic up to 50 μg/mL for 48 h of incubation, which is confirmed by the MTT assay as well as morphological studies in HeLa cells. The upconversion luminescence and magnetism together with biocompatibility enables the adaptability of the present system as a nanoprobe for potential bimodal imaging.     

Improvement of thermal and spectroscopic behavior of Er<Superscript>3+</Superscript>/Ce<Superscript>3+</Superscript> co-doped tellurite glass for lasing materials

Tellurite glasses (TeO₂–ZnO–Nb₂O₅) mono-doped Er³⁺ and co-doped Er³⁺/Ce³⁺ have been prepared using the melt-quenching technique. To evaluate the effect of Ce³⁺ on the structural, thermal stability of glass hosts and fluorescence properties of Er³⁺, X-ray diffraction patterns, Ftir spectra, differential scanning calorimeter curves, absorption spectra, fluorescence emission spectra, fluorescence lifetimes, up-conversion emission spectra of glass samples were measured and investigated. Using Judd–Ofelt theory, we calculated intensity parameters (Ω₂, Ω₄ and Ω₆), spontaneous emission probabilities, the radiative lifetime, luminescence branching factors and the quantum yield of luminescence for ⁴I_13/2 → ⁴I_15/2 transition. The co-doping with Ce³⁺ was effective on the suppression of up-conversion emission of Er³⁺ owing to the phonon-assisted energy transfer: Er³⁺:⁴I_11/2 + Ce³⁺:²F_5/2 → Er³⁺:⁴I_13/2 + Ce³⁺:²F_7/2 which contributed the effective enhancement of 1.53 µm fluorescence emission. The change in optical properties with the addition of Ce³⁺ ions have been discussed and compared with other glasses. Using the Mc Cumber method for the ⁴I_13/2 → ⁴I_15/2 transition, absorption cross-section, calculated emission cross-section, and gain cross-section values support that TZNEr1Ce1 glass is a potential material for developing broad-band and high-gain erbium-doped fiber amplifiers applied for 1.53 µm.     

Study of frequency upconversion in Yb<Superscript>3+</Superscript>/Eu<Superscript>3+</Superscript> by cooperative energy transfer in oxyfluoroborate glass matrix

Oxyfluoroborate glass co-doped with Eu and Yb ions has been prepared and characterized for its optical properties through photoluminescence, absorption and lifetime measurements. An intense red upconversion is observed from the ⁵D₀ level of Eu³⁺ ions through energy transfer from Yb³⁺ to Eu³⁺ ion when excited with 980 nm. The Judd–Ofelt parameters have been evaluated to estimate the local site symmetry around the Eu³⁺ ions. These parameters have been used to derive radiative properties such as transition probabilities, branching ratios, radiative lifetimes and stimulated emission cross-sections for the ⁵D₀–⁷F_J transitions. Decay of excitation of the ⁵D₀ level has been measured by monitoring the ⁵D₀→⁷F₂ transition (613 nm) at room temperature. Quantum efficiency for this transition is found to be 73%. We also monitored the effect of temperature on the fluorescence emission of Eu³⁺. PACS 42.70.Ce; 42.70.Hj     

Intense Upconversion Luminescence of Yb<Superscript>3+</Superscript>-Er<Superscript>3+</Superscript> in Li<Subscript>2</Subscript>O Content Tungsten-tellurite Glasses

The Er³⁺ -Yb³⁺ codoped in Li₂O content tungsten -tellurite (TWL) transparent glasses are synthesized and measured the absorption, Raman and upconversion luminescence (UPL) spectra. At room temperature intense green emission peak at 560 nm ( ⁴S_3/2→⁴I_15/2) and red emission peak at 670 nm ( ⁴F_9/2→⁴I_15/2) of Er³⁺ observed even at minimum 86 mW pumping power of infrared 980 nm excitation. For structure of the TWL glass, Raman spectrum result revealed that an important role of WO₃ in the formation of glass network linkage with Li₂O. Under this influence estimated lifetime of the ⁴I_11/2 of Er³⁺ was 1.89 μs and due to lower phonon energy of the glass produce strong upconversion signal. The effect of Er₂O₃ concentration on emission intensity result indicated that green emission intensity initially increase in compare to red emission. Under the 980 nm pump power variation measured the relatively increases the red emission to the green emission intensity and analyze the possible upconversion mechanism and process.     

Measurement of the fraction of reabsorbed light in an Er<Superscript>3+</Superscript>-doped glass

We report on an original continuous holographic grating technique to quantify the excitation transport within the excited states of erbium ions. We measure a very long range effect well beyond the μm distance which is attributed to radiation trapping. We demonstrate that 30% of the emitted light is reabsorbed inside the sample due to total internal reflections (TIR). The effect of reabsorption is totally removed when TIR are reduced by refractive index matching of the surroundings of the sample. PACS 78.20.-e     

Enhanced luminescence in transparent glass ceramics containing BaYF5: Ce3+ nanocrystals

Ce³⁺ doped transparent glass ceramics containing BaYF₅ nanocrystals were prepared by controlled heat treatment of 45SiO₂–15Al₂O₃–10Na₂O–24BaF₂–6Y₂O₃–0.5Ce₂O₃ (mol%) glass. X-ray diffraction and transmission electron microscopy data have revealed the formation of BaYF₅ nanocrystals. Both photoluminescence and X-ray excited luminescence spectra have shown a blue-shift of the emission band of Ce³⁺ on ceramization, which is consistent with the Ce³⁺ environment evolving from a glassy oxide to a fluoride phase. The luminescent intensity of Ce³⁺ ions in the transparent glass ceramics is greatly enhanced compared with the precursor glass under ultraviolet and X-ray excitation. This could be attributed to the Ce³⁺ ions present in the BaYF₅ crystalline phase.     

Intense White Luminescence from Combustion Synthesized Ca<Subscript>12</Subscript>Al<Subscript>14</Subscript>O<Subscript>33</Subscript>: Yb<Superscript>3+</Superscript>/Yb<Superscript>2+</Superscript> Single Phase Phosphor

The Ca₁₂Al₁₄O₃₃: Yb³⁺/Yb²⁺ single phase nano-phosphor has been synthesized through combustion route and its luminescence and lifetime studies have been carried out up to 20 K using 976 and 266 nm excitations. The samples heated in open atmosphere have shown the presence of Yb in Yb³⁺ and Yb²⁺ states. The 976 nm excitation results a cooperative upconversion emission at 486 nm due to the Yb³⁺ state and a broad band in the blue region and has been assigned to arise from the defect centers. The 266 nm excitation on the other hand results a broad emission band even from as-synthesized phosphor without doping of Yb, the width of which increases in presence of Yb due to the emission from Yb²⁺ ions formed in heated samples. The white emission covers almost whole visible region with bandwidth 190 nm. The ions in Yb²⁺ state has been found to increase with the increase in heating temperature up to 1,273 K. A back conversion of Yb²⁺ to Yb³⁺ has been observed for higher temperatures. Effect of boric and phosphoric acids as flux on the emission properties of Yb³⁺ and Yb²⁺ states have been examined and discussed. Quantum yield of emission has also been determined for different samples.     

Luminescence of Cr3+ in mullite transparent glass ceramics

Silicate glasses containing more than 10 mole% Al₂O₃ phase separate upon quenching, and when heat treated form transparent glass ceramics with scattering loss less than 0.01 cm⁻¹. Cr³⁺ used as a dopant is shown to reside in the mullite crystalline phase. The luminescence quantum efficiency is increased from less than 1% to about 30% by the crystallization process.