Spectroscopic investigation of cationic comb-type copolymers/DNA interaction: interpolyelectrolyte complex enhancement synchronized with DNA hybridization

We have demonstrated that cationic comb-type copolymers consisting of a polycation backbone and abundant grafts of water-soluble polymers stabilize DNA hybrids. Furthermore, the copolymers were found to accelerate strand exchange reaction between a double-stranded DNA and its complementary single-stranded DNA. In this article, we investigated the effects of PLL-g-Dex on base pairs of a self-complementary DNA octamer, d(GGAATTCC). The soluble interpolyelectrolyte complex (IPEC) between the DNA and copolymer allowed us to characterize the complex by using spectroscopic methods under physiological ionic condition. Chemical shifts of nucleobase proton signals were not changed by PLL-g-Dex. Furthermore, the copolymer slightly changed the von't Hoff DeltaH accompanying the helix-coil transition of the octamer. These results indicated that the base pairs of the duplex DNA in the IPEC were not perturbed by the polycationic copolymer. It was obviously shown by temperature dependencies of proton and phosphorus NMR spectra that DNA/copolymer interaction was considerably enhanced in response to ds DNA formation. An increase in the density and total number of DNA negative charges upon hybrid formation likely caused the higher affinity of the copolymer with the ds form over that of the copolymer with the ss form. The IPEC formation of CCCs with DNA, however, seems highly sensitive to the coil-helix transition of the DNA.     

Cross-linking of a DNA conjugate tethering a cis-bifunctional platinated complex to a target DNA duplex

Tethering an ethylene diamine linker to the 5' terminus of an oligothymidine sequence provides a ligand for complexation with K2PtCl4. Post-synthetic reaction of the platinum reagent with the diamino oligothymidine generates the diamino dichloro platinum-DNA conjugate that can be used for DNA duplex targeting by oligodeoxyncleotide-mediated triplex formation. Cross-linking between the third strand and the duplex occurs exclusively with the duplex target strand directly involved in triplex formation. No examples of cross-linking to the complementary target strand or cases of cross-linking to both target strands are observed. Most efficient cross-linking occurs when the dinucleotide d(GpG) is present in the target strand and no cross-linking occurs with the corresponding 7-deazaG dinucleotide target. Cross-linking is also observed when dC or dA residues are present in the target strand, or even with a single dG residue, but it is not observed in any cases to dT residues. Triplex formation provides the ability to target specific sequences of double-stranded DNA; conjugates of the type described here offer the potential of delivering a platinum complex to a specific DNA site.     

Toehold‐Mediated Displacement of an Adenosine‐Binding Aptamer from a DNA Duplex by its Ligand

DNA is increasingly used to engineer dynamic nanoscale circuits, structures, and motors, many of which rely on DNA strand‐displacement reactions. The use of functional DNA sequences (e.g., aptamers, which bind to a wide range of ligands) in these reactions would potentially confer responsiveness on such devices, and integrate DNA computation with highly varied molecular stimuli. By using high‐throughput single‐molecule FRET methods, we compared the kinetics of a putative aptamer–ligand and aptamer–complement strand‐displacement reaction. We found that the ligands actively disrupted the DNA duplex in the presence of a DNA toehold in a similar manner to complementary DNA, with kinetic details specific to the aptamer structure, thus suggesting that the DNA strand‐displacement concept can be extended to functional DNA–ligand systems.     

DNA logic gates

A conceptually new logic gate based on DNA has been devised. Methoxybenzodeazaadenine ((MD)A), an artificial nucleobase which we recently developed for efficient hole transport through DNA, formed stable base pairs with T and C. However, a reasonable hole-transport efficiency was observed in the reaction for the duplex containing an (MD)A/T base pair, whereas the hole transport was strongly suppressed in the reaction using a duplex where the base opposite (MD)A was replaced by C. The influence of complementary pyrimidines on the efficiency of hole transport through (MD)A was quite contrary to the selectivity observed for hole transport through G. The orthogonality of the modulation of these hole-transport properties by complementary pyrimidine bases is promising for the design of a new molecular logic gate. The logic gate system was executed by hole transport through short DNA duplexes, which consisted of the "logic gate strand", containing hole-transporting nucleobases, and the "input strand", containing pyrimidines which modulate the hole-transport efficiency of logic bases. A logic gate strand containing multiple (MD)A bases in series provided the basis for a sharp AND logic action. On the other hand, for OR logic and combinational logic, conversion of Boolean expressions to standard sum-of-product (SOP) expressions was indispensable. Three logic gate strands were designed for OR logic according to each product term in the standard SOP expression of OR logic. The hole-transport efficiency observed for the mixed sample of logic gate strands exhibited an OR logic behavior. This approach is generally applicable to the design of other complicated combinational logic circuits such as the full-adder.     

Strand exchange reaction modulated fluorescence "off-on" switching of hybridized DNA duplex stabilized silver nanoclusters

The fluorescence (FL)"off-on" switching of designed DNA duplex stabilized silver nanoclusters can be accomplished through the control of DNA strand exchange reaction. The successful sequential control of the FL emission of silver nanoclusters in "off-on" switching cycles confirms that the DNA duplex stabilized silver nanoclusters can work as a new kind of DNA FL switch.     

DNA sequence context and multiplex hybridization reactions: melting studies of heteromorphic duplex DNA complexes

Heteromorphic hybrid duplex DNA complexes are duplex states, other than perfectly matched duplexes, that can form when single strands comprising several different perfectly matched duplexes are simultaneously present in solution. Such cross-hybridization "side reactions" are of particular nuisance in multiplex reaction schemes, where many strands are designed to hybridize in parallel fashion with only their corresponding perfect complement strand. Relative to the perfect match duplexes, the sequence dependent features of these heteromorphic duplex states and their thermodynamic stability are an important consideration for multiplex hybridization reaction design. We have measured absorbance versus temperature melting curves and performed differential scanning calorimetry measurements on various mixtures of eight different 24 base single strands. When perfect complementary pairs of strands are mixed in single reactions, four perfectly matched duplexes form. When mixtures of strands that are not perfectly matched are prepared and analyzed, melting transitions for cross-hybridization are observed along with significant hyperchromicity changes. This is indicative of a melting hybrid, heteromorphic duplex states formed from two nonperfectly matched strands. In addition, when both the perfectly matched and noncomplementary strands are mixed together (in multiplex hybridization reactions) at molar ratios of 1:1, 3:1, and 1:3, evidence of perfect duplex and heteromorphic duplex complexes is found in all cases. A new analytical tool for considering heterogeneous, duplex complexes in multiplex hybridization mixtures is presented and employed to interpret the acquired melting data.     

A Peptide Nucleic Acid (PNA)‐DNA Ferrocenyl Intercalator for Electrochemical Sensing

A ferrocenyl intercalator was investigated to develop an electrochemical DNA biosensor employing a peptide nucleic acid (PNA) sequence as capture probe. After hybridization with single strand DNA sequence, a naphthalene diimide intercalator bearing ferrocene moieties (FND) was introduced to bind with the PNA‐DNA duplex and the electrochemical signal of the ferrocene molecules was used to monitor the DNA recognition. Electrochemical impedance spectroscopy was used to characterize the different modification steps. Differential pulse voltammetry was employed to evaluate the electrochemical signal of the FND intercalator related to its interaction with the complementary PNA‐DNA hybrid. The ferrocene oxidation peaks were utilised for the target DNA quantification. The developed biosensor demonstrated a good linear dependence of FND oxidation peak on DNA concentration in the range 1 fM to 100 nM of target DNA, with a low detection limit of 11.68 fM. Selectivity tests were also investigated with a non‐complementary DNA sequence, indicating that the FND intercalator exhibits a selective response to the target PNA‐DNA duplex.     

Cationic conjugated polyelectrolyte/molecular beacon complex for sensitive, sequence-specific, real-time DNA detection

A new fluorescence method has been developed for DNA detection at room temperature in a sensitive, selective, economical, and real-time manner that interfaces the superiority of a molecular beacon in mismatch discrimination with the light-harvesting property of water-soluble conjugated polyelectrolytes. The probe solution contains a cationic conjugated polyelectrolyte (PFP-NMe3+), a molecular beacon with a five base pairs double-stranded stem labeled at the 5'-terminus with fluorescein (DNA P-Fl), and ethidium bromide (EB, a specific intercalator of dsDNA). The electrostatic interactions between DNA P-Fl and PFP-NMe3+ keep them in close proximity, facilitating the fluorescence resonance energy transfer (FRET) from PFP-NMe3+ to fluorescein. Upon adding a complementary strand to the probe solution, the conformation of DNA P-Fl transits into dsDNA followed by the intercalation of EB into the grooves. Two-step FRET, from PFP-NMe3+ to DNA P-Fl (FRET-1), followed by FRET from DNA P-Fl to EB (FRET-2) takes place. In view of the observed fluorescein or EB emission changes, DNA can be detected in aqueous solution. Because the base mismatch in target DNA inhibits the transition of DNA P-Fl from the stem-loop to duplex structure, single nucleotide mismatch can be clearly detected.     

Photocontrolled binding and binding-controlled photochromism within anthracene-modified DNA

Modified DNA strands undergo a reversible light-induced reaction involving the intramolecular photodimerization of two appended anthracene tags. The photodimers exhibit markedly different binding behavior toward a complementary strand that depends on the number of bases between the modified positions. By preforming the duplex, photochromism can be suppressed, illustrating dual-mode gated behavior.     

Cationic copolymer-mediated DNA immobilization: interfacial structure and composition as determined by ellipsometry, dual polarization interferometry, and neutron reflection

DNA immobilization onto support surfaces is required in biotechnological applications such as microarrays and gene delivery. This important interfacial molecular process can be mediated from a preadsobred cationic polymer. There is, however, a lack of understanding over the control of the interfacial composition and structural distribution of the DNA immobilized. We have used a combined approach of spectroscopic ellipsometry (SE), dual polarization interferometry (DPI) and neutron reflection (NR) to determine the interfacial polymer adsorption and the subsequent DNA binding. Cationic diblock copolymers incorporating 30 phosphorylcholine (PC) groups and different diethylaminoethyl groups, referred to as MPC30-DEAn, were chosen because of their well-defined molecular architecture. While our studies revealed different effects of surface charge and hydrophobicity, the amount of copolymers adsorbed on both model surfaces showed a broad trend of increase with solution pH, indicating a strong effect arising from pH-dependent charge density on the copolymers. In contrast, the copolymer structure and solution concentration showed a weak effect under the conditions studied. The subsequent DNA binding at pH 7 showed that on both surfaces the amount of DNA immobilized followed an approximate 1:1 charge interaction for all different DNA samples studied, irrespective of single or double strand, or different DNA size, indicating the dominant effect of electrostatic interaction between the two species. Both DPI and NR revealed consistent thickness increase upon DNA binding. Furthermore, with increasing DNA size, the interfacial layer became much thicker, and charge interaction drove more extensive interfacial mixing between the two species. Our results show that the amount of DNA immobilized is controlled by the amount of cationic copolymer preadsorbed that is in turn controlled by the solution pH and surface chemistry but that is barely affected by the type and concentration of DNA or cationic copolymer.     

Telomestatin-induced stabilization of the human telomeric DNA quadruplex monitored by electrospray mass spectrometry

Electrospray mass spectrometry (ESI-MS) was used to monitor the kinetics of duplex formation between the human telomeric DNA quadruplex and its complementary strand; the complexation of telomestatin to the G-quadruplex delays the unwinding of the quadruplex structure and formation of the duplex.     

Duplex‐Selective Ruthenium‐Based DNA Intercalators

We report the design and synthesis of small molecules that exhibit enhanced luminescence in the presence of duplex rather than single‐stranded DNA. The local environment presented by a well‐known [Ru(dipyrido[3,2‐a:2′,3′‐c]phenazine)L₂]²⁺‐based DNA intercalator was modified by functionalizing the bipyridine ligands with esters and carboxylic acids. By systematically varying the number and charge of the pendant groups, it was determined that decreasing the electrostatic interaction between the intercalator and the anionic DNA backbone reduced single‐strand interactions and translated to better duplex specificity. In studying this class of complexes, a single Ru^II complex emerged that selectively luminesces in the presence of duplex DNA with little to no background from interacting with single‐stranded DNA. This complex shows promise as a new dye capable of selectively staining double‐ versus single‐stranded DNA in gel electrophoresis, which cannot be done with conventional SYBR dyes.     

Nicking endonuclease and target recycles signal amplification assisted quantum dots for fluorescence detection of DNA

An ultrasensitive fluorescence detection method for DNA based on nicking endonuclease (NEase) and target recycles assisted with CdTe quantum dots (QDs) is reported. In the detection system, when the target DNA is present, it hybridizes with a linker strand to from a duplex, in which the NEase recognizes specific nucleotide sequences and cleaves the linker strand. After nicking, the fragments of the linker strand spontaneously dissociate from the target DNA and another linker strand hybridizes to the target to trigger another strand-scission cycle. On the other hand, when the target was absent, no duplex is formed and no fragment of linker strand is produced. Then CdTe QDs and magnetic beads (MBs), which were all modified with DNA sequences complementary to that of the linker strands are added to the solution to detect the presence of a target DNA. The signal was generated through the difference in F?rster resonance energy transfer (FRET) between the MB and CdTe QDs. This method indicates that one target DNA leads to cleavage of hundreds of linker DNA, increasing detection sensitivity by nearly three orders of magnitude. This method should be applicable whenever there is a requirement to detect a specific DNA sequence and can also be used for multicomponent detection.     

Impact of Single Basepair Mismatches on Electron‐Transfer Processes at Fc‐PNA⋅DNA Modified Gold Surfaces

Gold‐surface grafted peptide nucleic acid (PNA) strands, which carry a redox‐active ferrocene tag, present unique tools to electrochemically investigate their mechanical bending elasticity based on the kinetics of electron‐transfer (ET) processes. A comparative study of the mechanical bending properties and the thermodynamic stability of a series of 12‐mer Fc‐PNA?DNA duplexes was carried out. A single basepair mismatch was integrated at all possible strand positions to provide nanoscopic insights into the physicochemical changes provoked by the presence of a single basepair mismatch with regard to its position within the strand. The ET processes at single mismatch Fc‐PNA?DNA modified surfaces were found to proceed with increasing diffusion limitation and decreasing standard ET rate constants k⁰ when the single basepair mismatch was dislocated along the strand towards its free‐dangling Fc‐modified end. The observed ET characteristics are considered to be due to a punctual increase in the strand elasticity at the mismatch position. The kinetic mismatch discrimination with respect to the fully‐complementary duplex presents a basis for an electrochemical DNA sensing strategy based on the Fc‐PNA?DNA bending dynamics for loosely packed monolayers. In a general sense, the strand elasticity presents a further physicochemical property which is affected by a single basepair mismatch which may possibly be used as a basis for future DNA sensing concepts for the specific detection of single basepair mismatches.     

Plasmid DNA complexation with phosphorylcholine diblock copolymers and its effect on cell transfection

We examined a series of novel cationic MPC-based (2-methacryloyloxyethyl phosphorylcholine) copolymers as vectors for gene delivery, with emphasis on the assessment of the effects of the charge ratio (administered via pH variation) on the complex (polyplex) formation and the subsequent transfection efficiency. A combination of electrophoresis, dynamic light scattering, and small angle neutron scattering was used to characterize the structure and charge distribution of the polyplexes formed between the copolymer and the luciferase plasmid DNA. Polymers with larger hydrophobic side chains had lower p K a values and tended to aggregate more strongly. For a given copolymer, electrostatic interaction was the main driving force for the formation of the nanopolyplexes. When the cationic copolymers were in excess, the majority of the polyplexes formed was neutral, and only a small faction of them carried net positive charges. Polyplexes formed under excess copolymer protected the DNA from restriction enzyme digestion. As the copolymers were weak polyelectrolytes, the pH had a distinct effect on the structure and charge distribution of the polyplexes formed. Below the p K a, the copolymers were found to bind with the plasmid DNA in the form of unimers, while above the p K a, the copolymers self-aggregated and complexed with DNA in the form of micelles. It was subsequently found that unimer/DNA polyplexes were far more effective in the transfection of HEK293 cells than micellar DNA polyplexes. The results thus revealed that different hydrophobicities of the side chains in the copolymer series led to different nanostructuring and charge characteristics, which had a consequential effect on the transfection efficiency. This study provided useful insight into the molecular processes underlying polyplex formation and demonstrated a strong link between structural and physical properties of polyplexes and cell transfection efficiency.     

Elementary processes of DNA surface hybridization resolved by single-molecule kinetics: implication for macroscopic device performance

Direct monitoring of single-molecule reactions has recently become a promising means of mechanistic investigation. However, the resolution of reaction pathways from single-molecule experiments remains elusive, primarily because of interference from extraneous processes such as bulk diffusion. Herein, we report a single-molecule kinetic investigation of DNA hybridization on a metal surface, as an example of a bimolecular association reaction. The tip of the scanning tunneling microscope (STM) was functionalized with single-stranded DNA (ssDNA), and hybridization with its complementary strand on an Au(111) surface was detected by the increase in the electrical conductance associated with the electron transport through the resulting DNA duplex. Kinetic analyses of the conductance changes successfully resolved the elementary processes, which involve not only the ssDNA strands and their duplex but also partially hybridized intermediate strands, and we found an increase in the hybridization efficiency with increasing the concentration of DNA in contrast to the knowledge obtained previously by conventional ensemble measurements. The rate constants derived from our single-molecule studies provide a rational explanation of these findings, such as the suppression of DNA melting on surfaces with higher DNA coverage. The present methodology, which relies on intermolecular conductance measurements, can be extended to a range of single-molecule reactions and to the exploration of novel chemical syntheses.

Hybridization of a single DNA molecule on a surface was investigated by electrical conductance measurements. The hybridization efficiency increases with increasing the DNA concentration, in contrast to preceding studies with ensemble studies.     

N7-guanine as a C+ mimic in hairpin aeg/aepPNA-DNA triplex: probing binding selectivity by UV-Tm and kinetics by fluorescence-based strand-invasion assay

N7-substituted guanine (N7G) has been introduced into aminoethylglycyl bisPNA (7) as a C(+) mimic to achieve pH-independent triplex formation with complementary DNA sequences. The introduction of chiral, cationic aminoethylprolyl units with C(+) and C(+) mimic N7G in the backbone of bisPNAs (8, 9) influenced the recognition of complementary DNA in an orientation-selective manner. A simple fluorescence assay is developed to examine the process of strand invasion of target DNA duplex by these modified bisPNAs and comparative results of the study employing triplex forming polypyrimidine (C/T) (6, 8) and purine-pyrimidine (N7G/T) mixmer-bisPNAs (7, 9) are presented.     

Quadruplex-to-duplex transition of G-rich oligonucleotides probed by cationic water-soluble conjugated polyelectrolytes

G-quartet DNA converts to duplex form in the presence of its complementary strand. This conformational change can be detected in real time by a homogeneous assay method based on the signal amplification of conjugated polyelectrolytes and the specific interaction of intercalating dyes with double-stranded DNA (dsDNA). The probe solution contains a cationic, conjugated polymer (CCP), G-quadruplex labeled with a fluorescein at the 5'-terminus (G-quadruplex-Fl), and ethidium bromide (EB). The addition of a complementary target results in the transition from G-quadruplex to duplex (dsDNA-Fl) and EB intercalation within the duplex structure. Excitation of the CCP leads to energy transfer from CCP to dsDNA-Fl (FRET-1) and then energy transfer from dsDNA-Fl to EB (FRET-2). Increasing the number of mismatched bases discourages dsDNA formation, which is detected in the assay.     

Electrochemical DNA Hybridization Detection Using DNA Cleavage

We report the new method for detection of DNA hybridization using enzymatic cleavage. The strategy is based on that S1 nuclease is able to specifically cleave only single strand DNA, but not double strand DNA. The capture probe DNA, thiolated single strand DNA labeled with electroactive ferrocene group, was immobilized on a gold electrode. After hybridization of target DNA of complementary and noncomplementary sequences, nonhybridized single strand DNA was cleaved using S1 nuclease. The difference of enzymatic cleavage on the modified gold electrode was characterized by cyclic voltammetry and differential pulse voltammetry. We successfully applied this method to the sequence‐selective discrimination between perfectly matched and mismatched target DNA including a single‐base mismatched target DNA. Our method does not require either hybridization indicators or other exogenous signaling molecules which most of the electrochemical hybridization detection systems require.     

Duplex stability of DNA.DNA and DNA.RNA duplexes containing 3'-S-phosphorothiolate linkages

3'-S-Phosphorothiolate (3'-SP) linkages have been incorporated into the DNA strand of both a DNA.RNA duplex and a DNA.DNA duplex. Thermal melting (T(m)) studies established that this modification significantly stabilises the DNA.RNA duplex with an average increase in T(m) of about 1.4 degrees C per modification. For two or three modifications, the increase in T(m) was larger for an alternating, as compared to the contiguous, arrangement. For more than three modifications their arrangement had no effect on T(m). In contrast to the DNA.RNA duplex, the 3'-S-phosphorothiolate linkage destabilised the DNA.DNA duplex, irrespective of the arrangement of the 3'-SP linkages. The effect of ionic strength on duplex stability was similar for both the phosphorothiolate-substituted and the unmodified RNA.DNA duplexes. The results are discussed in terms of the influence that the sulfur atom has on the conformation of the furanose ring and comparisons are also drawn between the current study and those previously conducted with other modifications that have a similar conformational effect.