Influence of conducting polymers based on carboxylated polyaniline on in vitro CaCO3 crystallization

Conducting polymers are interesting materials of technological applications, while the use of polymers as additives controlling crystal nucleation and growth is a fast growing research field. In the present article, we make a first step in combining both topics and report the effect of conducting polymer derivatives, which are based on carboxylated polyanilines (c-PANIs), on in vitro CaCO3 crystallization by the Kitano and gas diffusion method. This is the first example of the mineralization control of CaCO3 by a rigid carboxylated polymer. Both the concentration of c-PANI and the presence of carboxylate groups have a strong influence on the CaCO3 crystallization behavior and crystal morphology. X-ray diffraction (XRD) analysis shows crystalline calcite particles confirmed by FTIR spectra. pH and Ca2+ measurements during CaCO3 crystallization utilizing the Kitano and a constant-pH approach show a defined nucleation period of CaCO3 particles. The measurements allow for the calculation of the supersaturation time development, and the kinetic data can be combined with time-dependent light microscopy. The presence of c-PANIs delays the time of nucleation indicative of calcite nucleation inhibition. Microscopy illustrates the morphologies of CaCO3 crystals at all crystallization stages, from homogeneous spherical amorphous CaCO3 (ACC) particles corresponding to the first steps of crystallization to transition stage calcite crystals also involving a dissolution-recrystallization process in a late stage of crystallization. The data show that it is not possible to conclude the crystallization mechanism even for a very simple additive controlled crystallization process without time-resolved microscopic data supplemented by the analysis of the species present in the solution. Finally, fluorescence analysis indicates that conducting polymer derivatives can be incorporated into precipitated calcite particles. This gives rise to CaCO3 particles with novel and interesting optical properties.     

A systematic morphosynthesis of barium sulfate in the presence of phosphonate inhibitor

A systematic study of the influence of various experimental parameters on the morphology and size of BaSO4 crystals after crystallization from water in the presence of diethylenetriamine penta (methylphosphonic acid) (DETPMP) was presented. Depending on the experimental conditions, there are various crystal morphologies including flowers, ellipsoids, spheres, or conjoined spheres. The results indicated that the experimental parameters, such as the concentration of the inhibitor, the pH of solution, the aging of the particle growth, and the ratio [Ba2+]/[SO4(2-)], are important for the morphology and size of BaSO4. The morphogenesis of BaSO4 is controlled by the chelation of DETPMP with Ba2+ at the nucleation and the surface adsorption inhibition of crystal growth.     

P(St-co-MAA)乳液体系对CaCO3结晶的调控

大量研究表明, 有机/无机界面上的相互作用[1]是控制无机结晶的晶型、形貌、粒径等特征的决定因素. 本文利用乳液聚合方法合成了在诱导无机矿化后依然保持较为刚性界面的、能与无机离子作用的微球, 并在乳液中进行碳酸钙结晶实验, 用XRD, FTIR和SEM等手段对结晶进行了表征.     

Influence of ozonized kraft lignin on the crystallization of CaCO3

Results are reviewed from a study examining how structural modifications introduced by ozonization enhance the influence of kraft lignin on the crystallization of CaCO(3). Ozone treatment of kraft lignin in an aqueous environment is shown to increase its carboxylic acid and overall oxygen content and reduce its molecular weight. Calcium concentration and temperature were monitored in heated supersaturated solutions containing ozonized kraft lignins to gauge their influence on CaCO(3) crystallization processes. The presence of kraft lignin raises the temperature necessary to induce crystallization. This effect is shown to level off at relatively low lignin concentrations and be dependent on the extent of ozone treatment the kraft lignin has undergone. A linear correlation is found between crystallization temperatures and the carboxylic acid content of ozonized lignin samples indicating the introduction of these functional groups plays an important role in enhancing its inhibitory effect. Scanning electron microscopy images of crystals grown in the presence of kraft lignins show significant morphological modifications. These are consistent with specific or pseudo specific interactions between the lignin and crystal faces of calcite to inhibit growth parallel to its c axis. The influence over crystal morphology demonstrated by modified kraft lignin increases with increasing ozonization. Also presented here are crystallization temperature data for a range of kraft lignin ultrafiltration fractions, which indicate that the optimal (nominal) molecular weight of kraft lignin for inhibiting the crystallization of CaCO(3) lies between 5000 and 10000.     

Crystallization and aggregation behaviors of calcium carbonate in the presence of poly(vinylpyrrolidone) and sodium dodecyl sulfate

An anionic surfactant interacts strongly with a polymer molecule to form a self-assembled structure, due to the attractive force of the hydrophobic association and electrostatic repulsion. In this crystallization medium, the surfactant-stabilized inorganic particles adsorbed on the polymer chains, as well as the bridging effect of polymer molecules, controlled the aggregation behavior of colloidal particles. In this presentation, the spontaneous precipitation of calcium carbonate (CaCO3) was conducted from the aqueous systems containing a water-soluble polymer (poly(vinylpyrrolidone), PVP) and an anionic surfactant (sodium dodecyl sulfate, SDS). When the SDS concentrations were lower than the onset of interaction between PVP and SDS, the precipitated CaCO3 crystals were typically hexahedron-shaped calcite; the increasing SDS concentration caused the morphologies of CaCO3 aggregates to change from the flower-shaped calcite to hollow spherical calcite, then to solid spherical vaterite. These results indicate that the self-organized configurations of the polymer/surfactant supramolecules dominate the morphologies of CaCO3 aggregates, implying that this simple and versatile method expands the morphological investigation of the mineralization process.     

Continuous structural evolution of calcium carbonate particles: a unifying model of copolymer-mediated crystallization

Two double-hydrophilic block copolymers, each comprising a nonionic block and an anionic block comprising pendent aromatic sulfonate groups, were used as additives to modify the crystallization of CaCO3. Marked morphological changes in the CaCO3 particles were observed depending on the reaction conditions used. A poly(ethylene oxide)-b-poly(sodium 4-styrenesulfonate) diblock copolymer was particularly versatile in effecting a morphological change in calcite particles, and a continuous structural transition in the product particles from polycrystalline to mesocrystal to single crystal was observed with variation in the calcium concentration. The existence of this structural sequence provides unique insight into the mechanism of polymer-mediated crystallization. We propose that it reflects continuity in the crystallization mechanism itself, spanning the limits from nonoriented aggregation of nanoparticles to classical ion-by-ion growth. The various pathways to polycrystalline, mesocrystal, and single-crystal particles, which had previously been considered to be distinct, therefore all form part of a unifying crystallization framework based on the aggregation of precursor subunits.     

Selective crystallization of calcium salts by poly(acrylate)-grafted chitosan

The biopolymer chitosan was chemically modified by grafting polyacrylamide or polyacrylic acid in a homogeneous aqueous phase using potassium persulfate (KPS) as redox initiator system in the presence of N,N-methylene-bis-acrylamide as a crosslinking agent. The influence of the grafted chitosan on calcium salts crystallization in vitro was studied using the sitting-drop method. By using polyacrylamide grafted chitosan as substrate, rosette-like CaSO4 crystals were observed. This was originated by the presence of sulfate coming from the initiator KPS. By comparing crystallization on pure chitosan and on grafted chitosan, a dramatic influence of the grafted polymer on the crystalline habit of both salts was observed. Substrates prepared by combining sulfate with chitosan or sulfate with polyacrylamide did not produce similar CaSO4 morphologies. Moreover, small spheres or donut-shaped CaCO3 crystals on polyacrylic acid grafted chitosan were generated. The particular morphology of CaCO3 crystals depends also on other synthetic parameters such as the molecular weight of the chitosan sample and the KPS concentration.     

Influence of sodium dodecyl sulfate and static magnetic field on the properties of freshly precipitated calcium carbonate

Properties of calcium carbonate precipitated from aqueous solutions of CaCl(2) and Na(2)CO(3) in the presence of sodium dodecyl sulfate (SDS) and S-S 0.1 T magnetic field (MF) were studied. The nucleation and precipitation processes of CaCO(3) were investigated by pH and zeta potential measurements at 20 +/- 1 degrees C up to 2 h after mixing the solutions. Also the amounts of calcium carbonate deposited on the glass surfaces and its structure were examined. It was found that SDS influences the kinetics of precipitation, crystallographic forms, and crystal size of CaCO(3). The SDS effects are more pronounced in MF presence. A small amount of SDS accelerates transformation of vaterite into calcite, whereas increasing surfactant concentration moderates such a transformation. On the other hand, in all the systems, MF in the presence of SDS causes a slower transformation of vaterite into calcite. These effects are reflected in pH and zeta potential changes, although there is no clear dependence between the SDS amount present during the precipitation and changes of the parameters investigated. It seems that MF effect is most significant at a defined optimal SDS concentration. The results, however, do not allow suggestion of any detailed mechanism of the field interaction.     

Crystallization and Transformation Mechanism of Calcium Carbonate Polymorphs and the Effect of Magnesium Ion

The crystallization of calcium carbonate was carried out by mixing CaCl(2) and Na(2)CO(3) solutions. The morphology of precursor formed prior to the nucleation of the polymorphous crystals (calcite and vaterite) varies depending on the feed concentration. The faster nucleation rate of polymorphous crystals in 0.2 mol/L than in 0.05 mol/L solution results in the prompt disappearance of the precursor at 0.2 mol/L. In 0.05 mol/L solutions the lifetime of the precursor is relatively long. The crystallization fraction of vaterite increases with the feed concentration and decreases with the addition rate of Na(2)CO(2) solution. Vaterite takes on the various morphologies of the aggregates of the primary flocculation body (spherulite) depending on the crystallization conditions. Vaterite transforms to calcite by a direct solution-mediated mechanism. During crystallization the concentration attains a stationary value, which increases with the feed concentration and decreases with the addition rate of Na(2)CO(2) solution. This may be due to the crystal size decrease expected from the Gibbs-Kelvin equation. Magnesium ion suppresses the transformation of vaterite by inhibiting the growth of the calcite. Magnesium ion is selectively included in calcite and causes the increase of the attained concentration and the remarkable change in the morphology of calcite especially in 0.05 mol/L solution. Copyright 2001 Academic Press.     

Morphogenetic control of calcite crystal growth in sulfonic acid based hydrogels

In this paper the mineralization of CaCO(3) in various hydrogel matrices is presented. Sulfonic acid based hydrogels were prepared by introduction of sulfonate-containing monomers into a polyacrylamide network. The sulfonate content of polyacrylamide-co-vinylsulfonate and polyacrylamide-co-allylsulfonate decreases during elution of the copolymers in demineralized water, indicating insufficient linking of the sulfonate-bearing monomers within the hydrogel. In contrast to this, acrylamidomethylpropanesulfonate (AMPS) effectively copolymerizes with acrylamide (AAm) monomers. To study the influence of spatial arrangement of ionic functional groups within hydrogel networks on the mineralization of CaCO(3), AMPS copolymers with different degrees of AMPS cross-linking were synthesized. For the mineralization experiments the copolymers were placed into a double-diffusion arrangement. Calcite as the thermodynamically stable modification of CaCO(3) was obtained with a particular morphology. The pseudocubic habitus resembles aggregates obtained by mineralization in pure polyacrylamide. However, closer examination of the aggregates by scanning electron microscopy (SEM) shows that the crystal growth in the AMPS copolymers is different from that observed in polyacrylamide. Whereas the morphology of the calcite aggregates could be fine-tuned by using copolymers with different sulfonate content, the spatial distribution of the ionic functional groups alters the course of crystallization. Calcium ions are locally accumulated due to the heterogeneous distribution of functional sulfonate groups within the copolymer network. Thereby the nucleation of calcite is triggered, resulting in enhanced mineralization.     

醇-水混合溶剂中双亲水嵌段共聚物对CaCO3粒子形貌的调控

合成形态、大小及结构受到人为调控的无机材料是现代材料科学的一个重要研究方向, 通过生物模拟方法可望实现各类有机添加剂及模板对无机物形貌与结构的有效调控[1,2]. 近年来, 一类新型的无机晶体生长调控剂--双亲水嵌段共聚物[3]已成功地用于多种无机粒子形貌的有效调控. 双亲水嵌段共聚物由2个与无机表面亲和作用不同的亲水链段构成, 在其水溶液中, 已实现了具有一系列特殊形貌的碳酸钙[4~6]、磷酸钙[7]及硫酸钡[8]粒子的生物模拟合成. 人们已陆续报道了在多种有机添加剂及模板作用下典型的生物矿物CaCO3的生物模拟合成[9,10]. 我们曾系统地研究了水溶液中双亲水嵌段共聚物对CaCO3粒子形貌的调控作用[6],最近又在双亲水嵌段共聚物-表面活性剂混合溶液中合成出具有新颖形貌(如空壳状等)的CaCO3粒子[11]. 本文考察了醇-水混合溶剂中双亲水嵌段共聚物对CaCO3粒子形貌的调控作用, 初步揭示了溶剂特性对该调控作用的显著影响.     

Well-defined star-shaped calcite crystals formed in agarose gels

Single crystals of calcite exhibiting a morphology of well-defined 8-armed stars, which evolved from original rhombohedral calcite crystals with their 8 points extending radially into eight arms, were produced by crystallization of CaCO3 in agarose gels.     

稀土离子对溶液体系中碳酸钙生成的影响

用X射线粉末衍射、XPS光电子能谱、红外光谱以及ICP-MS等技术研究不同浓度的Ce3+,Nd3+,Tb3+,Gd3+,Lu3+对碳酸钙结晶状况的影响.稀土离子的加入有利于热力学稳定态的方解石型碳酸钙的生成,并且稀土离子能够部分的取代晶格中的钙离子,改变碳酸钙的结晶习性,在宏观上形成有序规则的排列.     

Morphology and Kinetics of Growth of CaCO<Subscript>3</Subscript> Precipitates Formed in Saline Water at 30°C

The crystallization kinetics and morphology of CaCO₃ crystals precipitated from the high salinity oilfield water were studied. The crystallization kinetics measurements show that nucleation and nuclei growth obey the first order reaction kinetics. The induction period of precipitation is extended in the high salinity solutions. Morphological studies show that impurity ions remain mostly in the solution phase instead of filling the CaCO₃ crystal lattice. The morphology of CaCO₃ precipitates can be changed from a smooth surface (calcite) to rough spheres (vaterite), and spindle rod bundles, or spherical, ellipsoid, flowers, plates and other shapes (aragonite).     

Bioinspired synthesis of calcium carbonate hollow spheres with a nacre-type laminated microstructure

In this Article, we combine the characters of hyperbranched polymers and the concept of double-hydrophilic block copolymer (DHBC) to design a 3D crystal growth modifier, HPG-COOH. The novel modifier can efficiently control the crystallization of CaCO(3) from amorphous nanoparticles to vaterite hollow spheres by a nonclassical crystallization process. The obtained vaterite hollow spheres have a special puffy dandelion-like appearance; that is, the shell of the hollow spheres is constructed by platelet-like vaterite mesocrystals, perpendicular to the globe surface. The cross-section of the wall of a vaterite hollow sphere is similar to that of nacres in microstructure, in which platelet-like calcium carbonate mesocrystals pile up with one another. These results reveal the topology effect of the crystal growth modifier on biomineralization and the essential role of the nonclassical crystallization for constructing hierarchical microstructures.     

Control of the morphogenesis of barium chromate by using double-hydrophilic block copolymers (DHBCs) as crystal growth modifiers

A systematic morphosynthesis of barium chromate particles has been performed by using double-hydrophilic block copolymers (DHBCs), which consist of a hydrophilic solvating block and a hydrophilic binding block, as crystal growth modifiers to direct the controlled precipitation of barium chromate from aqueous solution. Several kinds of DHBCs with different functional groups -COOH, -PO3H2, -SO3H, -SH as well as PEG-poly(aminoamine) block-dendrimer copolymers were explored for crystallization and morphology control of barium chromate. Well-defined morphologies of BaCrO4 particles can be produced, such as more or less dendritic X-shaped, elongated X-shaped, or rodlike particles, flower-like plates, ellipsoids, spheres, nanofiber bundles, nanofibers, and other more complex morphologies. In the presence of the phosphonated copolymer PEG-b-PMAA-PO3H2 (degree of phosphonation: 21%) at pH 5, large conelike bundles of nanofibers ranging from 10 to 20 nm in diameter with lengths up to 150 microns can be produced at room temperature, whereas replacement of the covalently bound phosphonate groups by the ionic salt analogue dopant fails to produce this structure, indicating the importance of the functional polymer block structures. The time-resolved formation process of the bundles of nanofibres was investigated, showing a remarkable self-similarity. At temperatures higher than 50 degrees C, in plastic flasks or when undergoing continuous stirring, only ellipsoids or nearly spherical particles can be obtained. This shows that the fiber formation relies on heterogeneous nucleation and is in agreement with a recently published mechanism where fiber formation is due to the vectorially directed self-assembly of primary particles. Our results demonstrate that the integration of DHBCs, taking advantage of the experimental conditions such as crystallization sites, temperature, pH, and reactant concentration, will extend the possibilities for controlling the shape, size, and microstructures of the inorganic crystals by means of a simple mineralization process.     

Effects of Carboxylic Acids on the Crystallization of Calcium Carbonate

The effects of seven carboxylic acids, i.e., acrylic acid, maleic acid, tartaric acid, malic acid, succinic acid, and citric acid, on CaCO(3) crystallization were studied using the unseeded pH-drift method along with a light-scattering technique. Experiments were started by mixing solutions of CaCl(2) and NaHCO(3) in the presence or absence of additives. The crystallization was studied by recording the decrease in pH resulting from the reaction Ca(2+)+HCO(3)(-)-->CaCO(3)+H(+). A given amount of carboxylic acid was added to the solution of CaCl(2) or NaHCO(3) before mixing the reactants. The pH profiles obtained in the case of the CaCl(2) solution containing an additive were similar to those for the NaHCO(3) solution containing one, and when an additive was added after the onset of crystallization, the growth of CaCO(3) immediately stopped. The light-scattering observations, in all cases, indicated that CaCO(3) nucleation occurred at 10-20 s after mixing of the reactants. The results indicated that the nucleation of CaCO(3) was not influenced by the presence of carboxylic acids, but CaCO(3) crystal growth was reduced by their adsorption to the surface of the CaCO(3) crystals. These phenomena were explained by assuming a stronger affinity of the carboxylic acids for CaCO(3) particles than for the free Ca(2+) ions in solution. The crystallization of CaCO(3) in the presence of additives was divided into three stages: nucleation, growth incubation, and growth periods. Copyright 2001 Academic Press.     

卵磷脂-水有序结构对CaCO3晶型的影响

Influence of the concentration of phosphatidylcholine (PC) in the solution of 0.5mol?L-1 CaCl2 on the crystal structure of CaCO3 has been studied by means of X-ray diffraction method. When the concentration of PC is below its CMC, the calcite CaCO3 is formed. It advantageous that CaCl2 reacts with Na2CO3 so as to form vaterite CaCO3 in the lipesome composed of PC more than in the water. The arnount of vaterite CaCO3 formed is increased with increase of concentration of PC. But if the concentration of PC is so increased as to form liquid crystal, then the amount of vaterite decreases obviously. The reason for the difference of crystal type formed has been discussed in the paper.     

Preparation of core-shell CaCO3 capsules via Pickering emulsion templates

Micron size and food grade pristine CaCO(3) particles were used to stabilize an oil in water Pickering emulsion. The particles also acted as nucleation sites for the subsequent crystallization of CaCO(3) with the addition of CaCl(2) and CO(2) gas as precursors. After the controllable crystallization process, a dense CaCO(3) shell with a few microns in thickness was formed. The CaCO(3) shell was proven to be calcite without the presence of crystallization modifiers. The crystallization speed and the shell integrity were controlled by manipulating the addition of CaCl(2) amount during the different crystallization stages; therefore, the homogeneous nucleation in the bulk was almost inhibited, and the heterogeneous nucleation at the oil-water interface on pristine CaCO(3) particles was the main contribution to the growth of the shell. The encapsulated limonene flavor in CaCO(3) capsules showed a prolonged release in neutral water at 85°C, while a burst release at pH 2 water as expected. The method is a simple and scalable process for creating inorganic core-shell capsules and can be used for producing food grade capsules for controlling the flavor release or masking undesirable taste in mouth.     

Effects of Carboxylic Acids on Calcite Formation in the Presence of Mg2+ Ions

The effects of seven carboxylic acids on calcite formation in the presence of Mg2+ ions, whose molar concentration ratio Mg2+/Ca2+ = 0.5 exclusively induced aragonite precipitation in the absence of carboxylic acids, were studied using a double diffusion technique. The presence of carboxylic acids, acrylic acid, maleic acid, tartaric acid, malonic acid, malic acid, succinic acid, and citric acid in the gel medium favored the formation of magnesian calcite relative to the amount of the additives. Induction time and the positions of the first precipitation were measured to analyze the behavior of crystallization based on the equivalency rule. The formation of magnesian calcite was also studied with the help of Avrami's equation (solid-state model for transformation). The results of applying this equation suggested that aragonite transformed into calcite through a solid-to-solid process. The formation of magnesian calcite was interpreted as the following process: aragonite nuclei, formed owing to Mg2+ ions at the initial stage of CaCO3 crystallization, transformed into calcite nuclei through a solid-to-solid process while their growth was inhibited by the adsorption of carboxylic acids. The magnesian calcite crystals grew on crystal seeds of calcite formed from aragonite nuclei. Copyright 1999 Academic Press.