Lipase-catalyzed kinetic resolution approach toward enantiomerically enriched 1-(β-hydroxypropyl)indoles

In a route towards enantiomerically enriched 1-(β-hydroxypropyl)indoles, which are potentially useful building blocks for high value-added chemicals synthesis, a kinetic resolution approach by means of lipase-catalyzed enantioselective acylation as well as hydrolysis/methanolysis has been elaborated for the first time. The enzymatic resolution of chiral N-substituted indole-based sec-alcohols was successfully accomplished, yielding both enantiomeric forms of the employed derivatives with up to >99% enantiomeric purity via an enantioselective transesterification under mild reaction conditions. The most selective resolutions were obtained using fungal (CAL-B and TLL) and bacterial (PFL and BCL) lipases and vinyl acetate as the acyl?group donor. The synthetic protocol described herein is very simple, user-friendly and efficient, thus paving the way for future access towards more complex compounds of this type. The absolute configurations of novel enantiomeric derivatives, and thus stereoselectivity of the described enzymatic reactions were confirmed by application of CDA-based NMR methodology and single-crystal X-ray diffraction analysis.     

Study on surface hydrolytic kinetics of poly(vinyl acetate) grafted onto polyurethane film

Alkali catalytic hydrolysis of poly(vinyl acetate) (PVAc) grafting onto polyurethane film surface was a heterogeneous reaction. The hydrolysis was carried on the PVAc particle surface, and the concentration of the alkali in the system was tested by titration method. The kinetics of PVAc surface hydrolytic reaction was studied by simple second-order reaction model. From linear regression analysis of experimental data, we inferred that the activation energy (E _a ) and pre-exponential factor (A) of PVAc surface hydrolytic reaction were 70.7 ± 0.2 kJ mol^?1 and (5.7 ± 0.5) × 10¹² kg mol^?1 s^?1, respectively. The results of transmission electron microscopy stated that the apparent hydrolytic degree was 2.1% when the surface of PVAc particle hydrolyzed absolutely.     

Enzymatic synthesis of a chiral chalcogran intermediate

Two lipases, Novozyme 435 (lipase B from Candida Antarctica) and Lipozyme TL IM (Thermomyces lanuginosus) were used successfully for the kinetic resolution of racemic 1-(2-furyl)-3-pentanol, the key intermediate in synthesis of the bark beetle pheromone, chalcogran. The desired S-(+)-enantiomer was prepared in enantiomeric excesses higher than 98 % and with yields of 26.3 % and 32.5 %, respectively. Methyl tert-butyl ether and vinyl acetate were found to be the best reaction media and the acetyl donor to achieve fast and effective resolution.     

Lipase-catalyzed preparation of both enantiomers of methyl jasmonate

Preparation of both enantiomeric methyl jasmonates 1 was achieved via lipase-catalyzed resolution of (±)-methyl 7-epicucurbate 3. Lipase P (Amano) provided good selectivity both for acylation of (±)-3 (E=370) and hydrolysis of the corresponding acetate (E=41). Resolution of (±)-methyl 6,7-diepicucurbate 2 gave poor results. It was found that the (6R,7S)-configuration was suitable for the selective enzymatic reaction and the C-(3) stereochemistry of the substrate did not influence the enzymatic reaction.     

Lipase catalyzed chemo-enzymatic synthesis of propranolol: A newer enzymatic approach

The biocatalytic processes are greener and safer alternatives for synthesis of drug and drug intermediates. This study reports one such approach of chemo-enzymatic synthesis of propranolol, a β-adrenergic receptor blocker. A green synthetic route was employed for synthesis of propranolol using enzymatic kinetic resolution. Racemic mixture of secondary alcohol [1-chloro-3-(naphthalen-1-yloxy)propan-2-ol] (RS)-5 was synthesized chemically in two step reaction and further its enzymatic kinetic resolution was carried out by using lipase to synthesize enantiomeric forms (R)-5 and S-(6) of propranolol. The kinetic resolution of (RS)-5 involves the transesterification of secondary racemic alcohol in which vinyl acetate is used as acyl donor. Initially, we screened commercially available lipases for kinetic resolution and of all the screened lipases Addzyme 001 showed the best results. The several reaction parameters such as organic solvent, acyl donor, temperature, reaction time and enzyme concentration were optimized to improve rate of reaction and to achieve maximum enantioselectivity. Addzyme 001 at 40 mg shows the maximum conversion rate of 49% using cyclohexane as the organic solvent, vinyl acetate as the acyl donor and it was found that the reaction yield was higher for (R)-5 along with the (S)-6 (eep = 98%, ees = 97%) at 40 °C in 48 h. Further, the treatment of (R)-5 with isopropyl amine resulted into formation of (S)-propranolol eep = 98%, and overall yield 29% independently. To synthesize (R)-propranolol, S-(6) acetate was produced enzymatically and was further deacylated by chemical hydrolysis for the production of (R)-propranolol. This study reports newer approach for synthesis of (R) and (S) propranolol using chemoenzymatic route.     

Lipase-catalyzed asymmetric acylation in the chemoenzymatic synthesis of furan-based alcohols

Eight racemic 1-(furan-2-yl)ethanols were prepared from the corresponding carbonyl compounds for enantioselective acylation studies, and seven of them were used in preparative-scale kinetic resolutions with Candida antarctica lipase B (Novozym 435) and vinyl acetate in dried diisopropyl ether. Mechanism-based competition between the (R)-acetate (enzymatic acylation product), vinyl acetate (added acylating reagent), and acetic acid (enzymatic hydrolysis product) toward CAL-B, together with the residual water of the lipase were shown to be potential reasons for side reactions, which affected the course of the kinetic resolution of 1-[5-(2-chlorophenyl) and (4-bromophenyl)furan-2-yl]ethanols. Clear effects were not observed with the other alcoholic substrates. Alcoholysis of the enantiomerically enriched (R)-acetates with methanol and CAL-B in diisopropyl ether was shown to be a potential method for the deprotection of the (R)-acetates and the formation of (R)-alcohols.     

Lipase catalyzed acylation of primary alcohols with remotely located stereogenic centres: the resolution of (±)-4,4-dimethyl-3-phenyl-1-pentanol

Enantioselective acylation of some (±)-3-alkyl-3-phenyl-1-propanols was performed with enzymes as catalysts. Moderate enantiomeric ratios (E), ranging up to E = 11.6, were obtained. In the resolution, some of the lipases selectively acylated the (+)-enantiomer while others acylated the (−)-enantiomer of the γ-substituted primary alcohols 1–4. Thus, it is possible to obtain both enantiomers of the alcohols as remaining substrate with high enantiomeric purity. The resolution of (±)-4,4-dimethyl-3-phenyl-1-pentanol 4 was extensively studied and screening experiments were conducted to select suitable lipase(s), reaction medium, acyl donor and appropriate temperature combinations to increase the enantiomeric ratio. Chirazyme^® L-6/chloroform/vinyl propionate/38 °C and Chirazyme^® L-7/di-iso-propyl ether/vinyl propionate/0 °C were chosen to obtain both enantiomers, (R)-(+)-4 and (S)-(−)-4, respectively, via sequential resolutions in excellent enantiomeric excess (>98%) and in 25% and 22% yield, respectively.     

The effect of vinyl esters on the enantioselectivity of the lipase-catalysed transesterification of alcohols

The enantioselectivity of the lipase from Pseudomonas cepacia (PCL) in the transesterification of 2-phenyl-1-propanol 1 was studied using a series of vinyl 3-arylpropanoates as acyl donors. The most enantioselective transesterification reaction of the alcohol was attained by using vinyl 3-(p-iodophenyl)- or 3-(p-trifluoromethylphenyl)propanoates, with enantiomer ratios, E, of 116 and 138, respectively. Vinyl 3-phenylpropanoate was also effective for the resolution of 1 mediated by lipases from P. fluorescens and porcine pancreas and for the PCL-catalysed transesterification of several 2-phenyl-1-alkanols. The enantiomeric resolution of 1 was practically carried out by the first enantioselective transesterification using PCL and vinyl 3-(p-iodophenyl)propanoate to afford (R)-1 and then the enantioselective hydrolysis of the resultant ester to afford (S)-1.     

A lipase catalyzed condensation reaction with a tricyclic diketone: yet another example of biocatalytic promiscuity

Novozym 435 (a commercially available immobilized form of Candida antarctica lipase B) was found to catalyze a condensation reaction of 5-hydroxy-endo-tricyclo[5.2.1.0^2,6]deca-4,8-dien-3-one with acetaldehyde (enzymatically produced from vinyl acetate in situ) under low water conditions, in presence of 10% organic co-solvent (N,N-dimethyl formamide or pyridine), to form a bis-adduct. Even though the condensation reaction occurred with pyridine (acting as a base catalyst) in the presence of acetaldehyde and in the absence of enzyme, the reaction was very slow as compared to the enzymatic process. Thus, while the non-enzymatic process took 4 days to achieve 100% conversion; in presence of enzyme it was possible within 4 h.     

Efficient lipase-catalyzed kinetic resolution of 4-arylmethoxy-3-hydroxybutanenitriles: application to an expedient synthesis of a statin intermediate

The kinetic resolution of 4-arylmethoxy-3-hydroxybutanenitriles was investigated by lipase-catalyzed transesterification in organic solvents. A high enantioselectivity was obtained via reaction with vinyl acetate in a mixed solvent (n-heptane/acetonitrile 1:1), which was catalyzed by the lipase from Artgribacter sp. A better selectivity was demonstrated when the number of substituents on the aryl ring increased. (S)-4-Arylmethoxy-3-hydroxybutanenitriles can be obtained with enantiomeric excesses of up to 98.0% by this method. Furthermore we have developed a novel route to synthesize tert-butyl (S)-6-benzyloxy-5-hydroxy-3-oxohexanoate, a key intermediate for the preparation of HMG-CoA reductase inhibitors (statins).     

Interaction of water in polymers: Poly(ethylene‐co‐vinyl acetate) and poly(vinyl acetate)

We studied the interaction of water in poly(ethylene‐co‐vinyl acetate) of various vinyl acetate compositions and poly(vinyl acetate), on the basis of the infrared spectrum of the water dissolved therein. The spectrum shows a very sharp and distinct band at about 3690 cm^?1 (named as A), and less‐sharp two bands around 3640 (B) and 3550 cm^?1 (C), the A band being outstanding especially at a low vinyl acetate composition. As the vinyl acetate composition increases, the A band decreases in intensity relative to the C band, whereas the B band increases contrarily. Analysis of the spectral change has elucidated that one‐bonded water (of which one OH is hydrogen‐bonded to the C?O of an ester group and the other OH is free) and two‐bonded water (each OH of which is hydrogen‐bonded to one C?O) coexist in the copolymer and that two‐bonded water increases in relative population with increasing vinyl acetate composition. Dissolved water is entirely two‐bonded in poly(vinyl acetate), in which C?O groups are densely distributed in the matrix. We proved that dissolved water in polymers is hydrogen‐bonded through one or two OH groups to the possessed functional groups but does not cluster. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 777–785, 2005     

Kinetics of hydrolysis and self condensation reactions of silanes by NMR spectroscopy

The hydrolysis of four alkoxy-silane coupling agents, 3-methacryloxypropyl trimethoxy silane (MPMS), 3-mercaptopropyl trimethoxy silane (MRPMS), octyl triethoxy silane (OES) and 3-aminopropyl triethoxy silane (APES) was carried out in an ethanol/water 80/20 (w/w) solution under acidic, alkaline and neutral conditions and followed by ¹H, ¹³C and ²⁹Si NMR spectroscopy. It was found that the kinetic rate of the hydrolysis of the silanes under neutral conditions was very low, except for APES, which displayed the fastest reaction speed. The addition of TEA catalyzed both silane hydrolysis and self condensation reactions. Acidic conditions enhanced the hydrolysis and the ensuing silanol entities were quite stable. In fact, these conditions slowed down the rate of the self condensation reactions, as deduced from in situ ¹H and ¹³C NMR. Thanks to in situ ²⁹Si NMR spectroscopy, the nature of the intermediary species versus reaction time was established.     

One-Pot Lipase-Catalyzed Aldol Reaction Combination of In Situ Formed Acetaldehyde

A facile tandem route to α,β-unsaturated aldehydes was developed by combining the two catalytic activities of the same enzyme in a one-pot strategy for the aldol reaction and in situ generation of acetaldehyde. Lipase from Mucor miehei was found to have conventional and promiscuous catalytic activities for the hydrolysis of vinyl acetate and aldol condensation with in situ formed acetaldehyde. The first reaction continuously provided material for the second reaction, which effectively reduced the volatilization loss, oxidation, and polymerization of acetaldehyde, as well as avoided a negative effect on the enzyme of excessive amounts of acetaldehyde. After optimizing the process, several substrates participated in the reaction and provided the target products in moderate to high yields using this single lipase-catalyzed one-pot biotransformation.

Diastereoselective and enantioselective alkaline-hydrolysis of 2-aryl-1-cyclohexyl acetate: a CAL-B catalyzed deacylation/acylation tandem process

Candida antarctica lipase proved to be a particularly efficient lipase for the resolution of racemic 2-arylcyclohexyl acetate in hydrolysis reaction with Na₂CO₃ in an organic medium. The (1R,2S)-trans-2-arylcyclohexanols 2a–2d were obtained with high ee values (up to >99%) and the selectivity reached E > 200. The influence of the enol ester and the solvent on (±)-trans-2-arylcyclohexanol in the CAL-B catalyzed acylation was also studied and compared with the deacylation. The CAL-B exhibits a better affinity for the alkaline hydrolysis reaction compared with acylation with the enol esters in the same organic solvents. The best conditions were applied to resolve a stereoisomeric mixture cis/trans-2-phenyl-1-cyclohexanol and its corresponding acetate by acylation and deacylation. The obtained results show a highly enantio- and diastereoselectivity of the CAL-B during the acylation and the deacylation in favor of the trans-(R)-enantiomer product. The resolution of a mixture of cis/trans-2-arylcyclohexanols was an easy, convenient approach to provide only one stereoisomer of a mixture of four with high enantiomeric excess.     

Lipase-catalyzed separation of the enantiomers of 1-substituted-3-arylthio-2-propanols

Optically active (R)- and (S)-1-substituted-3-(arylthio)propan-2-ols have been prepared in the reaction of the appropriate 2-(arylthiomethyl)oxiranes with chloride and azide anions followed by a lipase-catalyzed transesterification. The effects of the enzyme preparation as well as of the reaction conditions have been compared in terms of the enantiomeric excess of the obtained acetate and unreacted alcohol.     

Efficient biocatalysis for the production of enantiopure (S)-epoxides using a styrene monooxygenase (SMO) and Leifsonia alcohol dehydrogenase (LSADH) system

Herein we report the production of enantiopure epoxides through biocatalysis using recombinant Escherichia coli cells expressing Rhodococcus sp. ST-10 styrene monooxygenase (SMO) and Leifsonia sp. S749 alcohol dehydrogenase (LSADH) genes are described. Rhodococcus sp. ST-10 SMO catalyzed the epoxidation of various alkenes, including styrene derivatives, vinyl pyridines, and linear alkenes, to give (S)-epoxides. NADH was regenerated by the reduction of NAD⁺ by LSADH with 2-propanol. The E. coli biocatalyst was used in an aqueous/organic biphasic reaction system and the reaction conditions were optimized. Under the optimized conditions, 170 mM of (S)-styrene oxide was obtained from styrene in the organic phase with excellent enantiomeric excess (99.8%). This biocatalytic process was used to synthesize various (S)-epoxides.     

Practical Synthesis of (S)‐(+)‐3‐Octanol by Lipase‐Catalyzed Enantioselective Acetylation

(S)‐(+)‐3‐Octanol (S)‐1 was prepared in high enantiomeric excess through catalyzed acetylation of racemic alcohol 1 by using lipase from Candida antarctica (Chirazyme L‐2) in the presence of vinyl acetate in toluene at 30°C. The pure (S)‐1 was obtained in 73% isolated yield with 62% conversion. Moreover, acetate (R)‐2 was converted to (S)‐1 via mesylation and followed by hydrolysis using sodium bicarbonate solution in 44% yield.     

Enzyme-catalysed improved resolution of (RS)-4-cyano-4-(3,4-dimethoxyphenyl)-4-isopropyl-1-butanol

Resolutions of (RS)-4-cyano-4-(3,4-dimethoxyphenyl)-4-isopropyl-1-butanol 1 using various enzymes were performed. Among them, Pseudomonas fluorescens resolved it with moderate stereoselectivity (E=13) and reacted faster with the (S)-enantiomer. To optimize enzyme-catalysed reaction conditions for the resolution, the effect of solvents and additives was studied. In n-hexane:ethyl acetate (9:1), both reaction rate and selectivity were high. When pyridine, potassium carbonate and molecular sieves were used as additives, the enantiomeric excess of the (R)-enantiomer was 99, 99 and 98% at 52–60% conversion, respectively. However, in diisopropyl ether, the enantiomeric excess of unreacted alcohol (R)-1 was up to 99% at 70% conversion without additives.     

Evaluation of lipase from Candida rugosa in the resolution of endo-(±)-1,8,9,10,11,11-hexachloropentacyclo[6.2.1.13,6.02,7.05,9]dodecan-4-alcohol

endo-(±)-1,8,9,10,11,11-Hexachloropentacyclo[6.2.1.1^3,6.0^2,7.0^5,9]dodecan-4-ol (±)-7 and exo-(±)-1,8,9,10,11,11-hexachloropentacyclo[6.2.1.1^3,6.0^2,7.0^5,9]dodecan-4-ol (±)-4 have been prepared and the enantiomeric enrichment capacity of the lipase from Candida rugosa in the transesterification with vinyl acetate of these compounds was evaluated. It was verified that the lipase recognize only the alcohol (±)-7, producing endo-(+)-1,8,9,10,11,11-hexachloropentacyclo[6.2.1.1^3,6.0^2,7.0^5,9]dodecan-4-yl acetate (+)-8 with ee >95% and conversion of 44% as the only product.