Fast matrix digestion with hot ethanolic alkali plus pyrogallol for polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and coplanar polychlorinated biphenyls analysis in biological samples

The efficiency of hot alkaline digestion of a sample matrix was investigated for determination of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and coplanar polychlorinated biphenyls (CoPCBs) in biological samples. Results of recovery tests of octachlorodibenzofuran (OCDF) after spiking into lean tuna showed degradation of OCDF and the production of a large quantity of lower-chlorinated dibenzofurans (LoCDFs) when the sample was digested with hot ethanolic KOH. However, it was also confirmed that pyrogallol (PG) prevented dechlorination of OCDF. The accuracy of the hot alkaline digestion method with PG was demonstrated by analyzing PCDD/Fs-spiked lean tuna. The proposed method is more suitable than conventional versions for the determination of dioxins in biological samples in terms of savings in time, adequate digestion of matrix and high degree of recovery of internal standards.     

Loss of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and coplanar polychlorinated biphenyls during nitrogen gas blowdown process for ultra-trace analysis

This study examined standard solutions to assess the influence of the gas flow rate and organic solvent type on losses caused by gas blowdown of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/DFs) and coplanar polychlorinated biphenyls (Co-PCBs). Results obtained here will contribute to maintaining analytical method performance and system quality for PCDD/DFs and Co-PCBs analyses. An organic solvent (with 0.5 ml each of acetone, dichloromethane, n-hexane, and toluene), PCDD/DFs or Co-PCBs, and their ¹³C₁₂-labeled compounds were put separately into 10 ml pear-shaped flasks. The samples were blown to dryness at room temperature until the last trace of solvent disappeared. They were subsequently reconstituted in those flasks. Analyte recoveries were calculated by comparing blown samples to those that had not been blown. Recoveries of Co-PCBs were more affected than those of PCDD/DFs when the gas flow rates were set at 203, 261, 332, and 456 ml/min. Losses of Co-PCBs were least at 203-332 ml/min. Regarding losses of PCDD/DFs and Co-PCBs, the toluene solution showed the least variation in recovery. An actual soil sample extract was also examined using optimized conditions for the gas flow rate and solvent types obtained by experiments in standard solutions. Thereby, the blowdown conditions gave quantitative recoveries of ¹³C₁₂-labeled compounds in the sample extract.     

Flow-injection solid surface lanthanide-sensitized luminescence sensor for determination of <Emphasis Type="Italic">p</Emphasis>-aminobenzoic acid

A single optosensing device based on lanthanide-sensitized luminescence was developed for determination of p-aminobenzoic acid (PABA). The method is based on the formation of a complex between PABA and Tb(III) immobilized on the solid phase (QAE A-25 resin) placed inside the flow cell. NaCl (1 M) was used as carrier solution and HCl (0.05 M) as eluent. The sample solutions of PABA (100 μL) containing Tb(III) and buffered at pH = 6.0 were injected into the carrier stream and the luminescence was measured at λ _ex = 290 nm and λ _em = 546 nm. The method shows a linear range from 0.2 to 6.0 μg mL⁻¹ with an RSD of 1.2% (n = 10) and a sampling frequency of 22 h⁻¹. A remarkable characteristic of the method is its high selectivity which allows it to be satisfactorily applied to the analysis of PABA in pharmaceutical samples without prior treatment. Figure Typical emission bands of Tb(III) in a solid-phase PABA–Tb(III) luminescence spectrum     

Preparation,Structural Characterization and the Molecular Structure of 2,3,5-Trinitro-<Emphasis Type="Italic">p</Emphasis>-xylene

2,3,5-trinitro-p-xylene (TPX) is synthesized by nitration of p-xylene in mixed acid of nitric and sulfuric acid. Single crystal of TPX is cultured from DMF solution using a slow cooling method. The compound is characterized by FT-IR, ¹H NMR and MS techniques. The crystal structure is determined by X-ray⁴ single-crystal diffraction analysis. The crystal belongs to the monoclinic system with space group P_n. Its unit cell parameters are as follows: a = 0.8271(2), b = 0.6011(1), c = 1.0487(2) nm, β = 105.42(2)^∘, V = 0.50263(2) nm³, D_c = 1.593 g/cm³, Z = 2, F(0 0 0) = 248. The molecular structures of TPX have been calculated at the B3LYP/6-31G^** and B3LYP/6-311G^** levels of theory, and its frequencies analysis have also been accomplished at the same level of theory. The thermal decomposition process of the compound was studied using DSC and TG-DTG techniques. The predicted nitro group vibrations with B3LYP/6-311G^** calculation considerably agree with the observed frequencies. The calculated results propose that the structural parameters from the theory are close to those of the crystal structure from the experiments.     

Effect of Cu(II) on the electrochemically initiated reaction of thiols with<Emphasis Type="Italic"> N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diethyl-<Emphasis Type="Italic">p</Emphasis>-phenylenediamine: methodology for the indirect voltammetric determination of Cu(II)

The effect of Cu(II) on the determination of homocysteine via its electrochemically initiated reaction with N,N-diethyl-p-phenylenediamine is examined. The presence of copper inhibited the detection process for homocysteine owing to a complexation reaction occurring. This provided an indirect route for the sensitive and selective determination of Cu(II), which produced a linear response over the range from 2.5 to 500 M and a limit of detection of 2.5 M. The detection pathway was examined in the presence of metallic and inorganic ions, with negligible interference observed.     

Horseradish peroxidase-catalyzed polymerization of<Emphasis Type="Italic"> p</Emphasis>-hydroxycinnamic acid for synthesis of reactive microspheres

In this article, we report the experimental synthesis of reactive polymer microspheres of poly(p-hydroxycinnamic acid). Enzyme-catalyzed polymerization of poly(p-hydroxycinnamic acid) using horseradish peroxidase as a catalyst and hydrogen peroxide as an oxidant took place in a mixture solution of methanol and phosphate buffer solution; it was found that the fraction of methanol in the mixture solution strongly affected the yield of powdery polymer materials. The chemical structure of the polymers was characterized by ¹H-NMR and FT-IR spectroscopies, and the molecular weight was measured by gel permeation chromatography. The ¹H-NMR chart of the obtained polymer was almost the same as that of the monomer; FT-IR spectra indicated the existence of carboxyl groups. The weight-average molecular weight of the soluble part in tetrahydrofuran was found to be 1,451. Dispersion polymerization of p-hydroxycinnamic acid was carried out in a mixture solution of methanol and phosphate buffer solution by adding a dispersion stabilizer. Of the several such polymers tested, poly(vinyl alcohol) was found to be the most effective in producing reactive poly(p-hydroxycinnamic acid) microspheres.     

Extraction and preconcentration of polychlorinated dibenzo-p-dioxins using the cloud-point methodology: Application to their determination in water samples by high-performance liquid chromatography

A new analytical method based on the cloud-point extraction (CPE) methodology combined with high-performance liquid chromatography is used in this study for the extraction and quantification of polychlorinated dibenzo-p-dioxins. These compounds are extracted by using the non-ionic surfactant polyoxyethylene 10 lauryl ether (POLE) from different aqueous systems: fresh, brackish and sea waters. After the cloud-point extraction, which also allowed a preconcentration of the PCDDs being studied, the samples were analysed using a HPLC-UV system under the optimum chromatographic conditions. The proposed method showed very satisfactory recovery percentages for the PCDDs under study and standard deviation values lower than 2%.The results obtained were finally compared with those found using the traditional liquid-liquid extraction method.     

Simultaneous determination of <Emphasis Type="Italic">p</Emphasis>-hydroxyacetophenone,chlorogenic acid,and caffeic acid in Herba Artemisiae Scopariae by capillary electrophoresis with electrochemical detection

Capillary electrophoresis with electrochemical detection has been employed for the determination of p-hydroxyacetophenone, chlorogenic acid, and caffeic acid in Herba Artemisiae Scopariae (the dried sprout of Artemisia scoparia Waldst. et Kit.). The effects of several important factors, such as the concentration and the acidity of the running buffer, separation voltage, injection time, and detection potential, were investigated to acquire the optimum conditions. The detection electrode was a 300-μm-diameter carbon disc electrode at a working potential of +0.90 V (relative to the saturated calomel electrode). The three analytes can be well separated within 11 min in a 40-cm-long fused-silica capillary at a separation voltage of 15 kV in 50 mM borate buffer (pH 9.2). The relation between peak current and analyte concentration was linear over about 3 orders of magnitude, with detection limits (signal-to-noise ratio of 3) of 0.31, 0.39, and 0.50 μM for p-hydroxyacetophenone, chlorogenic acid, and caffeic acid, respectively. The proposed method has been successfully applied to monitor the three bioactive constituents in real plant samples and to differentiate between different herbal drugs with satisfactory assay results.     

Effects of ionization on the phase behavior of poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide-co-acrylic acid) and poly(<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diethylacrylamide-co-acrylic acid) in water

Phase transitions of poly(N-isopropylacrylamide-co-acrylic acid) (PiPA-AA) and poly(N,N- diethylacrylamide-co-acrylic acid) (PdEA-AA) in water have been investigated by means of turbidimetry, Fourier transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC). The phase transition temperatures (T_p) of these copolymers increase with the degree of ionization () of the acrylic acid (AA) units, which in turn is dependent on the pH of the solutions. Apparent values of pK_a for the AA units, determined from the pH dependencies of T_p, are 4.7 and 5.4 for PiPA-AA and PdEA-AA, respectively. Differences between T_p for PiPA-AA and T_p for PiPA homopolymer (T_p) are +1.5 and –0.2 °C/mol% of AA at =1 and 0, respectively. The values of T_p for PdEA-AA are +2.6 (ionic) and –0.5 (nonionic)°C/mol%, indicating that the incorporated AA units have a larger effect on PdEA than on PiPA. DSC measurements performed with each of these copolymers at different pH values show a linear relationship between T_p and the enthalpy of transition (H). IR measurements of PiPA-AA show that the profiles of IR bands from both iPA and AA units exhibit critical changes at T_p of the copolymer. Heating the solution above T_p leads to shifts of the amide II, C–H stretch, and C–H bend bands from the iPA units toward lower wavenumbers, as well as a shift of the amide I band from the iPA units toward higher wavenumbers. A decrease in the intensity of the symmetric C=O stretch IR band from carboxylate anions (1560 cm^–1), and an increase in the intensity of the C=O stretch band from COOH groups (1705 cm^–1) suggest that a partial protonation of the carboxylate groups (COO^–+H⁺COOH) takes place upon the phase transition.     

4-Hydroxy-2-quinolones 145. <Emphasis Type="Italic">p</Emphasis>-Toluenesulfonylhydrazide as a tosylating agent

The reaction of ethyl 4-chloro-1-methyl-2-oxo-1,2-dihydroquinoline-3-carboxylate with p-toluene-sulfonylhydrazide in anhydrous solvents in the presence of triethylamine results in the tosylation of position 4 of the quinolone. Features of the steric structure of the tosyl-substituted compound are discussed. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 847–852, June, 2008.     

Estimation of uncertainty in p<Emphasis Type="Italic">K</Emphasis><Subscript>a</Subscript> values determined by potentiometric titration

A procedure is presented for estimation of uncertainty in measurement of the pK(a) of a weak acid by potentiometric titration. The procedure is based on the ISO GUM. The core of the procedure is a mathematical model that involves 40 input parameters. A novel approach is used for taking into account the purity of the acid, the impurities are not treated as inert compounds only, their possible acidic dissociation is also taken into account. Application to an example of practical pK(a) determination is presented. Altogether 67 different sources of uncertainty are identified and quantified within the example. The relative importance of different uncertainty sources is discussed. The most important source of uncertainty (with the experimental set-up of the example) is the uncertainty of pH measurement followed by the accuracy of the burette and the uncertainty of weighing. The procedure gives uncertainty separately for each point of the titration curve. The uncertainty depends on the amount of titrant added, being lowest in the central part of the titration curve. The possibilities of reducing the uncertainty and interpreting the drift of the pK(a) values obtained from the same curve are discussed.     

Extraction of <Emphasis Type="Italic">p</Emphasis>-hydroxyacetophenone and catechin from Norway spruce needles. Comparison of different extraction solvents

The phenolic compounds p-hydroxyacetophenone and catechin have been extracted from Norway spruce needles with pure methanol, 80 and 50% (v/v) aqueous methanol, pure acetonitrile, 80% (v/v) aqueous acetonitrile, and pure water. Extraction efficiency of the individual solvents was compared. Although 80% aqueous methanol is the solvent most frequently used for extraction of soluble phenolic compounds from needles, it was found that pure methanol is a more suitable extraction solvent. Surprisingly, a two-step procedure based on the extraction of crushed needles with water then re-extraction with methanol proved a good alternative to direct extraction with methanol. Extraction of uncrushed spruce needles might indicate that relatively more p-hydroxyacetophenone than catechin was located in the surface layer of the needle.     

Benchmarking and validating algorithms that estimate p<Emphasis Type="Italic">K</Emphasis><Subscript>a</Subscript> values of drugs based on their molecular structures

The REGDIA regression diagnostics algorithm in S-Plus is introduced in order to examine the accuracy of pK _a predictions made with four updated programs: PALLAS, MARVIN, ACD/pKa and SPARC. This report reviews the current status of computational tools for predicting the pK _a values of organic drug-like compounds. Outlier predicted pK _a values correspond to molecules that are poorly characterized by the pK _a prediction program concerned. The statistical detection of outliers can fail because of masking and swamping effects. The Williams graph was selected to give the most reliable detection of outliers. Six statistical characteristics (F _exp, R ², , MEP, AIC, and s(e) in pK _a units) of the results obtained when four selected pK _a prediction algorithms were applied to three datasets were examined. The highest values of F _exp, R ², , the lowest values of MEP and s(e), and the most negative AIC were found using the ACD/pK _a algorithm for pK _a prediction, so this algorithm achieves the best predictive power and the most accurate results. The proposed accuracy test performed by the REGDIA program can also be applied to test the accuracy of other predicted values, such as log P, log D, aqueous solubility or certain physicochemical properties of drug molecules.     

Adsorption of<Emphasis Type="Italic"> N</Emphasis>-dodecyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethyl-3-ammonio-1-propanesulfonate (DDAPS), a model zwitterionic surfactant,on the Au(111) electrode surface

Electrochemical measurements including cyclic voltammetry, differential capacity, and chronocoulometry have been used to characterize the adsorption behaviors of the zwitterionic surfactant N-dodecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (DDAPS) on the Au(111) electrode surface. The thermodynamics of the ideally polarized electrode have been employed to determine the Gibbs excess and the Gibbs energy of adsorption. The results show that the adsorption of DDAPS has a multistate character. The first two states are observed at potentials close to zero charge. At low bulk DDAPS concentrations, it corresponds to the formation of a film of nearly flat adsorbed molecules. At higher concentrations it is converted into a hemimicellar state. The second state is formed at negative potentials and charge densities close to 0 C cm^–2. It corresponds to a film of tilted molecules oriented with the hydrocarbon tail towards the metal and the polar head toward the solution.Dedicated to Professor Zbigniew Galus on the occasion of his 70^th birthday and in recognition of his many contributions to electrochemistry.     

Expression Analysis and Characteristics of <Emphasis Type="Italic">Profilin</Emphasis> Gene from Silkworm, <Emphasis Type="Italic">Bombyx mori</Emphasis>

A recombinant Bombyx mori profilin protein (rBmPFN) was overexpressed in Escherichia coli BL21. Purified rBmPFN was used to generate anti-BmPFN polyclonal antibody, which were used to determine the subcellular localization of BmPFN. Immunostaining indicated that profilin can be found in both the nucleus and cytoplasm but is primarily located in the cytoplasm. Real-time RT-PCR and Western blot analyses indicated that, during the larvae stage, profilin expression levels are highest in the silk gland, followed by the gonad, and are lowest in the fatty body. Additionally, BmPFN expression begins during the egg stage, increases during the larvae stage, reaches a peak during the pupa stage, and decreases significantly in the moth. Therefore, we propose that BmPFN may play an important role during larva stage development, especially in the silk gland.     

Triterpene glycosides from <Emphasis Type="Italic">Lonicera</Emphasis>. Isolation and structural determination of seven glycosides from flower buds of <Emphasis Type="Italic">Lonicera macranthoides</Emphasis>

The structures of seven triterpene glycosides (1–7), of which the 23-O-acetyl, 28-O-β-D-glucopyranosyl-(1→6)-O-β-D-glucopyranosyl ester of hederagenin 3-O-β-D-glucopyranosyl-(1→3)-O-α-L-rhamnopyranosyl-(1→2)-O-α-L-arabinopyranoside (2) was new, from the flower buds of Lonicera macranthoides were established using chemical and NMR spectroscopic methods. Published in Khimiya Prirodnykh Soedinenii, No. 1, pp. 32–34, January–February, 2008.     

Determination of carbendazim,thiabendazole, and<Emphasis Type="Italic"> o-</Emphasis>phenylphenol residues in lemons by HPLC following sample clean-up by ion-pairing

An efficient analytical method is presented involving effective sample clean-up with solid-phase extraction and HPLC-UV analysis for the simultaneous determination of carbendazim, thiabendazole, and o-phenylphenol residues in lemons. Sample preparation involves extraction with acetonitrile acidified with trifluoroacetic acid and an ethyl acetate/petroleum ether mixture. Purification of the crude extract was carried out with liquid–liquid partitioning after addition of an aqueous ammonia solution. Final clean-up was performed on polymeric reversed-phase cartridges pretreated with sodium dodecyl sulfate. Chromatographic analysis was performed on a reversed-phase HPLC column isocratically eluted with an acetonitrile/water/ammonia mixture and UV detection at 254 nm. The chromatographic method is repeatable, reproducible, and sensitive. Fungicide recoveries from lemon samples fortified at levels of 5 and 1 mg kg^–1 were 81–85% for carbendazim, 96–98% for thiabendazole, and 81–106% for o-phenylphenol with coefficients of variation of 2.5–7.4%. Detection limits for carbendazim, thiabendazole, and o-phenylphenol in lemons were 0.21, 0.27, and 0.51 mg kg^–1, respectively.     

Reaction sites of <Emphasis Type="Italic">N,N′</Emphasis>-substituted <Emphasis Type="Italic">p</Emphasis>-phenylenediamine antioxidants

The geometries of N,N′-diphenylbenzene-1,4-diamine (DPPD), N-phenyl-N′-(1-phenylethyl)benzene-1,4-diamine (SPPD), N-(4-methylpentan-2-yl)-N′-phenylbenzene-1,4-diamine (6PPD), N-propan-2-yl-N′-phenylbenzene-1,4-diamine (IPPD), N-(2-methoxybenzyl)-N′-phenylbenzene-1,4-diamine (MBPPD), and N-phenyl-N′-(2-phenylpropan-2-yl)benzene-1,4-diamine (CPPD) as well as of their dehydrogenation products were optimized by the semiempirical AM1 method. The results support the idea of stable N_B=C_X structures formation during the consecutive dehydrogenation of SPPD, 6PPD, IPPD, and MBPPD antioxidants. The biradicals formed during the second step of dehydrogenation of substituted phenylenediamines might be important for their antioxidant effectiveness. Dedicated to Professor Vladimír Kvasnička, DrSc., in honour of his 65th birthday