Toluene-sandwiched trinuclear copper(I) and silver(I) triazolates and phosphine adducts of dinuclear copper(I) and silver(I) triazolates

Cu (I) and Ag (I) complexes of the fluorinated triazolate ligand [3,5-(C3F7)2Tz](-) have been synthesized using the corresponding metal(I) oxides and the triazole. They form pi-acid/base adducts with toluene, leading to [Tol][M3][Tol] ([Tol]=toluene; [M3]={[3,5-(C3F7)2Tz]Cu}3 or {[3,5-(C3F7)2Tz]Ag}3) type structures. Packing diagrams show the presence of extended chains of the type {[Tol][M3][Tol]}infinity, but the intertoluene ring distances are too long for significant pi-arene/pi-arene contacts. These copper and silver triazolates react with PPh3 (at a 1:1 metal ion/P molar ratio), leading to dinuclear {[3,5-(C3F7)2Tz]Cu(PPh3)}2 and {[3,5-(C3F7) 2Tz]Ag(PPh3)}2. They feature a six-membered Cu(mu-N-N) 2Cu or Ag(mu-N-N)2Ag core with a boat conformation.     

Flip-flop sensors: a new class of silicon sensors

Integrated sensors based on flip-flops have been succesfully fabricated for the measurement of several physical parameters and subsequently tested. The sensors consist of flip-flops in which one circuit element is sensitive to the desired physical parameter. The sensing action consists of alternately bringing the flip-flop into an unstable and a stable state and counting the resulting ones or zeros. This number is a measure for the asymmetry of the flip-flop and thus for the physical parameter. To illustrate the principle, a force sensor based on a flip-flop containing piezoresistors is presented.     

Thin-film oxygen sensors using a luminescent polynuclear gold(I) complex

Robust thin-film oxygen sensors were fabricated by encapsulating a lipophilic, polynuclear gold(I) complex, bis{m-(bis(diphenylphosphino)octadecylamine-P,P′)}dichlorodigold(I), in oxygen permeable polystyrene and ormosil matrices. Strong phosphorescence, which was quenched by gaseous and dissolved oxygen, was observed from both matrices. The polystyrene encapsulated dye exhibited downward-turning Stern–Volmer plots which were well fitted by a two-site model. The ormosil trapped complex showed linear Stern–Volmer plots for dissolved oxygen quenching but was downward turning for gaseous oxygen. No leaching was observed when the ormosil based sensors were immersed in flowing water over an 8 h period. Both films exhibited fully reversible response and recovery to changing oxygen concentration with rapid response times.     

Dipyrrolylquinoxaline-bridged Schiff bases: a new class of fluorescent sensors for mercury(II)

Novel 2,3-bis(1H-pyrrol-2-yl)quinoxaline-functionalized Schiff bases were prepared and characterized as new fluorescent sensors for mercury(II) ion. The X-ray crystal structures of compounds 4, 5, 4a and 5a were determined. The binding properties of 4 and 5 for cations were examined by UV-vis and fluorescence spectroscopy. The UV-vis and fluorescence data indicate that a 1 : 1 stoichiometric complex is formed between compound 4 (or 5) and mercury(II) ion, and the association constant is (3.81 +/- 0.7) x 10(5) M(-1) for 4 and (3.43 +/- 0.53) x 10(5) M(-1) for 5. The recognition mechanism between compound 4 (or 5) and metal ion was discussed based on their chemical construction and the fluorescence quenching effect when they interact with each other. Competition experiments revealed that compound 4 (or 5) has a highly selective response to mercury(II) ion in aqueous solution.     

Highly luminescent gold(I)-silver(I) and gold(I)-copper(I) chalcogenide clusters

The reactions of [AuClL] with Ag(2)O, where L represents the heterofunctional ligands PPh(2)py and PPh(2)CH(2)CH(2)py, give the trigoldoxonium complexes [O(AuL)(3)]BF(4). Treatment of these compounds with thio- or selenourea affords the triply bridging sulfide or selenide derivatives [E(AuL)(3)]BF(4) (E=S, Se). These trinuclear species react with Ag(OTf) or [Cu(NCMe)(4)]PF(6) to give different results, depending on the phosphine and the metal. The reactions of [E(AuPPh(2)py)(3)]BF(4) with silver or copper salts give [E(AuPPh(2)py)(3)M](2+) (E=O, S, Se; M=Ag, Cu) clusters that are highly luminescent. The silver complexes consist of tetrahedral Au(3)Ag clusters further bonded to another unit through aurophilic interactions, whereas in the copper species two coordination isomers with different metallophilic interactions were found. The first is analogous to the silver complexes and in the second, two [S(AuPPh(2)py)(3)](+) units bridge two copper atoms through one pyridine group in each unit. The reactions of [E(AuPPh(2)CH(2)CH(2)py)(3)]BF(4) with silver and copper salts give complexes with [E(AuPPh(2)CH(2)CH(2)py)(3)M](2+) stoichiometry (E=O, S, Se; M=Ag, Cu) with the metal bonded to the three nitrogen atoms in the absence of AuM interactions. The luminescence of these clusters has been studied by varying the chalcogenide, the heterofunctional ligand, and the metal.     

Organotin(IV) triazolates: Synthesis and their spectral characterization

Some organotin(IV) triazolates of general formula R_nSn(L)_4 − n (where R = Me, n-Bu and Ph for n = 2; R = Me, n-Pr and n-Bu for n = 3 and HL = 3-amino-5-mercapto-1,2,4-triazole) have been synthesized by the reaction of R₂SnCl₂/R₃SnCl with NaL in 1:2/1:1 molar ratio. Whereas, Oct₂SnL₂ has been synthesized azeotropically by the reaction of Oct₂SnO and HL in 1:2 molar ratio. As good single crystals were not obtained, a large number of experimental techniques, viz. UV/Vis, IR, far-IR, multinuclear (¹H, ¹³C and ¹¹⁹Sn) NMR and ¹¹⁹Sn Mössbauer spectroscopic studies, were used to accomplish a definitive characterization and determination of their most probable structures. In these compounds triazole acts as a monoanionic bidentate ligand, coordinating through S_exo and N(4). The IR and ¹¹⁹Sn Mössbauer spectroscopic studies allow us to deduce a highly distorted cis-trigonal-bipyramidal structure for R₃SnL and a distorted skew trapezoidal-bipyramidal structure for R₂SnL₂, in the solid state. However, ¹H, ¹³C and ¹¹⁹Sn NMR spectral studies revealed that weak bonding between tin and N(4) is further weakened in the solution leading to pseudo-tetrahedral/tetrahedral structure.     

Trinuclear silver(I) complexes of fluorinated pyrazolates

Silver pyrazolates [[3-(CF3)Pz]Ag]3, [[3-(CF3),5-(CH3)Pz]Ag]3, [[3-(CF3),5-(Ph)Pz]Ag]3, [[3-(CF3),5-(But)Pz]Ag]3, and [[3-(C3F7),5-(But)Pz]Ag]3 have been synthesized by treatment of the corresponding pyrazole with a slight molar excess of silver(I) oxide. This economical and convenient route gives silver pyrazolates in high (>80%) yields. X-ray crystal structures of [[3-(CF3),5-(CH3)Pz]Ag]3, [[3-(CF3),5-(But)Pz]Ag]3, and [[3-(C3F7),5-(But)Pz]Ag]3 show that these molecules have trinuclear structures with essentially planar to highly distorted Ag3N6 metallacycles. [[3-(CF3),5-(CH3)Pz]Ag]3 forms extended columns via intertrimer argentophilic contacts (the closest Ag...Ag separation between the neighboring trimers are 3.355 and 3.426 A). The trinuclear [[3-(CF3),5-(But)Pz]Ag]3 units crystallize in pairs, basically forming "dimers of trimers", with the six silver atom core of the adjacent trimers adopting a chair conformation. However, in these dimers of trimers, even the shortest intertrimer Ag...Ag distance (3.480 A) is slightly longer than the van der Waals contact of silver (3.44 A). [[3-(C3F7),5-(But)Pz]Ag]3, which has two bulky groups on each pyrazolyl ring, shows no close intertrimer Ag...Ag contacts (closest intertrimer Ag...Ag distance = 5.376 A). The Ag-N bond distances and the intratrimer Ag...Ag separations of the silver pyrazolates do not show much variation. However, their N-Ag-N angles are sensitive to the nature (especially, the size) of substituents on the pyrazolyl rings. The pi-acidic [[3,5-(CF3)2Pz]Ag]3 and [[3-(C3F7),5-(But)Pz]Ag]3 form adducts with the pi-base toluene. X-ray data show that they adopt extended columnar structures of the type [[Ag3]2.[toluene]]infinity and [[Ag3]'.[toluene]]infinity ([[3,5-(CF3)2Pz]Ag]3 = [Ag3],[[3-(C3F7),5-(But)Pz]Ag]3 = [Ag3]'), in which toluene interleaves and makes face-to-face contacts with [[3-(C3F7),5-(But)Pz]Ag]3 or dimers of [[3,5-(CF3)2Pz]Ag]3.     

三核铜(Ⅰ)配合物合成及结构分析

铜(I)配合物由于其变化奇异的结构,性质及配位数而引起化学工作者的广泛兴趣.众所周知,四电子供体双二苯基膦甲烷(dppm)适宜在近距离内与两个金属原子同时配位,容易形成八员环的二聚体M2P4C2[1],因而是桥联两个低氧化态过渡金属的最佳选择,由于在M2(dppm)2框架结构中的配位不饱和性,仍需有单齿或双齿配体参加配位,这也正是M2(dppm)2类配合物特殊的成键,反应性和催化性的主要原因,这种附加配体不仅影响金属离子的配位构型而且影响M2(dppm)2的框架结构,同时dppm能够稳定多核配合物.我们在配体dppm存在下直接还原铜(Ⅱ)盐得到双核铜(I)配合物[Cu(dppm)(NO3)]2[2],又在四苯基硼钠存在下部分取代弱配位的硝酸根制备了具有新奇结构的三核铜(I)配合物[Cu3(dppm)3(OH)(NO3)](NO3)CH3OH,通过元素分析,核磁,红外,电导等方法研究了配合物的有关物理化学性质,配合物的晶体和分子结构已由X-射线单晶结构分析确定.     

Hydrometal analogues of aromatic hydrocarbons: a new class of cyclic hydrocoppers(I)

A new class of cyclic hydrocoppers(I) with the general formula CunHn (n = 3-6), resembling the cyclic hydrocarbon analogues, were predicted by means of DFT calculations to be stable molecules adopting a perfect planar configuration of high-symmetry characteristic of the aromatic systems.     

Synthesis, structural characterization, and theoretical studies of gold(I) and gold(I)-gold(III) thiolate complexes: quenching of gold(I) thiolate luminescence

The gold(I) thiolate complexes [Au(2-SC6H4NH2)(PPh3)] (1), [PPN][Au(2-SC6H4NH2)2] (2) (PPN = PPh3=N=PPh3), and [{Au(2-SC6H4NH2)}2(mu-dppm)] (3) (dppm = PPh2CH2PPh2) have been prepared by reaction of acetylacetonato gold(I) precursors with 2-aminobenzenethiol in the appropriate molar ratio. All products are intensely photoluminescent at 77 K. The molecular structure of the dinuclear derivative 3 displays a gold-gold intramolecular contact of 3.1346(4) A. Further reaction with the organometallic gold(III) complex [Au(C6F5)3(tht)] affords dinuclear or tetranuclear mixed gold(I)-gold(III) derivatives with a thiolate bridge, namely, [(AuPPh3){Au(C6F5)3}(mu2-2-SC6H4NH2)] (4) and [(C6F5)3Au(mu2-2-SC6H4NH2)(AudppmAu)(mu2-2-SC(6)H4NH2)Au(C6F5)3] (5). X-ray diffraction studies of the latter show a shortening of the intramolecular gold(I)-gold(I) contact [2.9353(7) or 2.9332(7) A for a second independent molecule], and short gold(I)-gold(III) distances of 3.2812(7) and 3.3822(7) A [or 3.2923(7) and 3.4052(7) A] are also displayed. Despite the gold-gold interactions, the mixed derivatives are nonemissive compounds. Therefore, the complexes were studied by DFT methods. The HOMOs and LUMOs for gold(I) derivatives 1 and 3 are mainly centered on the thiolate and phosphine (or the second thiolate for complex 2), respectively, with some gold contributions, whereas the LUMO for derivative 4 is more centered on the gold(III) fragment. TD-DFT results show a good agreement with the experimental UV-vis absorption and excitation spectra. The excitations can be assigned as a S --> Au-P charge transfer with some mixture of LLCT for derivative 1, an LLCT mixed with ILCT for derivative 2, and a S --> Au...Au-P charge transfer with LLCT and MC for derivative 3. An LMCT (thiolate --> Au(III) mixed with thiolate --> Au-P) excitation was found for derivative 4. The differing nature of the excited states [participation of the gold(III) fragment and the small contribution of sulfur] is proposed to be responsible for quenching the luminescence.     

Silver(I) and gold(I) complexes of rhodanine

Summary Some rhodanine (HL) complexes of silver(I) and gold(1) have been prepared and studied by conductivity measurements and by i.r. spectroscopy. Structures for the complexes are proposed.     

Synthesis of luminescent gold(I) and gold(III) complexes with a triphosphine ligand

We have synthesized and characterized a series of trinuclear gold(I) complexes [(AuX)(3)(mu-triphos)] (triphos = bis(2-diphenylphosphinoethyl)phenylphosphine; X = Cl 1, Br 2, I 3, C(6)F(5) 4) and di- and trinuclear gold(III) complexes [[Au(C(6)F(5))(3)](n)(mu-triphos)] (n = 2 (5), 3 (6)). The crystal structure of 6 [[Au(C(6)F(5))(3)](3)(mu-triphos)] has been determined by X-ray diffraction studies, which show the triphosphine in a conformation resulting in very long gold-gold distances, probably associated with the steric requirements of the tris(pentafluorophenyl)gold(III) units. Complex 6 crystallizes in the triclinic space group P(-1) with a = 12.7746(16) A, b = 18.560(2) A, c = 21.750(3) A, alpha = 98.215(3) degrees, beta = 101.666(3) degrees, gamma = 96.640(3) degrees, and Z = 2. Chloride substitutions in complex 1 afford trinuclear gold(I) complexes [(AuX)(3)(mu-triphos)] (X = Fmes (1,3,5-tris(trifluoromethyl)phenyl) 7, p-SC(6)H(4)Me 8, SCN 9) and [Au(3)Cl(3)(-)(n)()(S(2)CNR(2))(n)(mu-triphos)] (R = Me, n = 3 (10), 2 (12), 1 (14); R = CH(2)Ph, n = 3 (11), 2 (13), 1 (15)). The luminescence properties of these complexes in the solid state have been studied; at low temperature most of them are luminescent, including the gold(III) derivative 6, with the intensity and the emission maxima being clearly influenced by the nature and the number of the ligands bonded to the gold centers.     

Mononuclear aggregation-induced emission (AIE)-active gold(Ⅰ)-isocyanide phosphors: Contrasting phosphorescent mechanochromisms and effect of halogen substitutions on room-temperature phosphorescence nature

Developing phosphors with long-lifetime(millisecond scale or even longer) solid state room temperature phosphorescence(RTP) feature has attracted considerable attention. However, to date, stimuli-responsive phosphors with RTP nature are still rare due to the absence of effective guidelines for the exploitation of luminophors synchronously possessing stimuli-responsive and RTP characteristics. In this work,a series of mononuclear gold(Ⅰ) complexes are reported. All these complexes exhibit various...     

Arylgold(I) and aryl(triphenylphosphine)gold(I)compounds

Novel monomeric benzyl- and aryl-gold(I) triphenylphosphine complexes have been prepared. Pure, uncomplexed 2-[(dimethylamino)methyl]-phenylgold(I) has been isolated from the reaction of tetranuclear bis {2-[(dimethylamino)methyl]phenyl}goldlithium (R₄ Au₂ Li₂) with trimethyltin bromide.     

A new preparation method of gold nanoparticles by intra-reduction of sodium gold（I） sulfite

In this study, well-dispersed gold nanoparticles were prepared by using intra-molecular reduction of sodium gold sulfite, without using additional reductants and chloride free. The technical parameters including transformation temperature, pH, and concentration were optimized by the single-factor method as 90 C, pH 1, and 0.01 mmol/L [Na3Au（SO3）2], respectively. The resultant colloidal transmission electron microscopy images （TEM） and UV-vis absorption spectrophotometer spectra were acquired to check their properties, and the results show this kind of colloidal gold is controlled to 6 nm in sizes and has good stability in solution.     

Photosensitive azobispyridine gold(I) and silver(I) complexes

The neutral and cationic dinuclear gold(I) compounds [(μ-N-N)(AuR)(2)] (N-N = 2,2'-azobispyridine (2-abpy), 4,4'-azobispyridine (4-abpy); R = C(6)F(5), C(6)F(4)OC(12)H(25)-p, C(6)F(4)OCH(2)C(6)H(4)OC(12)H(25)-p) and [(μ-N-N){Au(PR(3))}(2)](CF(3)SO(3))(2) (N-N = 2-abpy, 4-abpy, R = Ph, Me) have been obtained by displacement of a weakly coordinated ligand by an azobispyridine ligand. The corresponding silver(I) dinuclear [(μ-2-abpy){Ag(CF(3)SO(3))(PPh(3))}(2)] and polynuclear [{Ag(CF(3)SO(3))(4-abpy)}(n)] compounds have been obtained. The molecular structures of [(μ-2-abpy){Au(PPh(3))}(2)](CF(3)SO(3))(2) and [(μ-4-abpy){Au(PMe(3))}(2)](CF(3)SO(3))(2) have been confirmed by X-ray diffraction studies and feature linear gold(I) centers coordinated by pyridyl groups, and non-coordinated azo groups. In contrast the X-ray structure of [(2-abpy){Ag(CF(3)SO(3))(PPh(3))}(2)] shows tetracoordinated silver(I) centers involving chelating N-N coordination by pyridyl and azo nitrogen atoms. The gold(I) compounds with a long alkoxy chain do not behave as liquid crystals, and decompose before their melting point. The soluble gold(I) derivatives are photosensitive in solution and isomerize to the cis azo isomer under UV irradiation, returning photochemically or thermally to the most stable initial trans isomer. The silver(I) derivative [(2-abpy){Ag(CF(3)SO(3))(PPh(3))}(2)] also photoisomerizes in solution under UV irradiation, showing that its solid state structure, which would block isomerization by azo coordination, is easily broken. These processes have been monitored by UV-vis absorption and (1)H NMR spectroscopy. All these compounds are non-emissive in the solid state, even at 77 K.